• Märken
  • Företag
  • Kontakt
SV
Type Code Seach | *NOT READY*
#CODE
Förslag på nyckelord
Förslag på artikelnummer
Discontinued Products

Cutting punches in special shapes / forcing pin / TiCN, HW, WPC (Part Numbers - CAD Download)

Cutting punches in special shapes / forcing pin / TiCN, HW, WPC

Click on this image to zoom in.

Click on this image to zoom in.

MISUMI

MISUMI

  • SKD11
  • POWDER HSS
  • TiCN
  • HW
  • WPC

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
  2. 2
  3. 3
  4. Next >>
Part Number
H-PJ4L5-[40-80/10]-P[2-4.9/0.01]-W[2-4.9/0.01]-A[1-4/0.01]-R0-S[0.2-20/0.01]
H-PJ4L5-[40-80/10]-P[2-4.9/0.01]-W[2-4.9/0.01]-A[1-4/0.01]-R[0.2-40/0.01]-S[0.2-20/0.01]
H-PJ4L5-LC[37-79.9/0.1]-P[2-4.9/0.01]-W[2-4.9/0.01]-A[1-4/0.01]-R0-S[0.2-20/0.01]
H-PJ4L5-LC[37-79.9/0.1]-P[2-4.9/0.01]-W[2-4.9/0.01]-A[1-4/0.01]-R[0.2-40/0.01]-S[0.2-20/0.01]
H-PJ4L6-[40-80/10]-P[2-5.9/0.01]-W[2-5.9/0.01]-A[1-5/0.01]-R0-S[0.2-20/0.01]
H-PJ4L6-[40-80/10]-P[2-5.9/0.01]-W[2-5.9/0.01]-A[1-5/0.01]-R[0.2-40/0.01]-S[0.2-20/0.01]
H-PJ4L6-LC[37-79.9/0.1]-P[2-5.9/0.01]-W[2-5.9/0.01]-A[1-5/0.01]-R0-S[0.2-20/0.01]
H-PJ4L6-LC[37-79.9/0.1]-P[2-5.9/0.01]-W[2-5.9/0.01]-A[1-5/0.01]-R[0.2-40/0.01]-S[0.2-20/0.01]
H-PJ4L8-[40-100/10]-P[3-7.9/0.01]-W[3-7.9/0.01]-A[1-7/0.01]-R0-S[0.2-20/0.01]
H-PJ4L8-[40-100/10]-P[3-7.9/0.01]-W[3-7.9/0.01]-A[1-7/0.01]-R[0.2-40/0.01]-S[0.2-20/0.01]
H-PJ4L8-LC[37-99.9/0.1]-P[3-7.9/0.01]-W[3-7.9/0.01]-A[1-7/0.01]-R0-S[0.2-20/0.01]
H-PJ4L8-LC[37-99.9/0.1]-P[3-7.9/0.01]-W[3-7.9/0.01]-A[1-7/0.01]-R[0.2-40/0.01]-S[0.2-20/0.01]
H-PJ4L10-[40-100/10]-P[3-9.9/0.01]-W[3-9.9/0.01]-A[1-9/0.01]-R0-S[0.2-20/0.01]
H-PJ4L10-[40-100/10]-P[3-9.9/0.01]-W[3-9.9/0.01]-A[1-9/0.01]-R[0.2-40/0.01]-S[0.2-20/0.01]
H-PJ4L10-LC[37-99.9/0.1]-P[3-9.9/0.01]-W[3-9.9/0.01]-A[1-9/0.01]-R0-S[0.2-20/0.01]
H-PJ4L10-LC[37-99.9/0.1]-P[3-9.9/0.01]-W[3-9.9/0.01]-A[1-9/0.01]-R[0.2-40/0.01]-S[0.2-20/0.01]
H-PJ4L13-[40-100/10]-P[6-12.9/0.01]-W[6-12.9/0.01]-A[1-12/0.01]-R0-S[0.2-20/0.01]
H-PJ4L13-[40-100/10]-P[6-12.9/0.01]-W[6-12.9/0.01]-A[1-12/0.01]-R[0.2-40/0.01]-S[0.2-20/0.01]
H-PJ4L13-LC[37-99.9/0.1]-P[6-12.9/0.01]-W[6-12.9/0.01]-A[1-12/0.01]-R0-S[0.2-20/0.01]
H-PJ4L13-LC[37-99.9/0.1]-P[6-12.9/0.01]-W[6-12.9/0.01]-A[1-12/0.01]-R[0.2-40/0.01]-S[0.2-20/0.01]
H-PJ4L16-[40-100/10]-P[6-15.9/0.01]-W[6-15.9/0.01]-A[1-15/0.01]-R0-S[0.2-20/0.01]
H-PJ4L16-[40-100/10]-P[6-15.9/0.01]-W[6-15.9/0.01]-A[1-15/0.01]-R[0.2-40/0.01]-S[0.2-20/0.01]
H-PJ4L16-LC[37-99.9/0.1]-P[6-15.9/0.01]-W[6-15.9/0.01]-A[1-15/0.01]-R0-S[0.2-20/0.01]
H-PJ4L16-LC[37-99.9/0.1]-P[6-15.9/0.01]-W[6-15.9/0.01]-A[1-15/0.01]-R[0.2-40/0.01]-S[0.2-20/0.01]
H-PJ4L20-[40-100/10]-P[6-19.9/0.01]-W[6-19.9/0.01]-A[1-19/0.01]-R0-S[0.2-20/0.01]
H-PJ4L20-[40-100/10]-P[6-19.9/0.01]-W[6-19.9/0.01]-A[1-19/0.01]-R[0.2-40/0.01]-S[0.2-20/0.01]
H-PJ4L20-LC[37-99.9/0.1]-P[6-19.9/0.01]-W[6-19.9/0.01]-A[1-19/0.01]-R0-S[0.2-20/0.01]
H-PJ4L20-LC[37-99.9/0.1]-P[6-19.9/0.01]-W[6-19.9/0.01]-A[1-19/0.01]-R[0.2-40/0.01]-S[0.2-20/0.01]
H-PJ4L25-[40-100/10]-P[6-24.9/0.01]-W[6-24.9/0.01]-A[1-24/0.01]-R0-S[0.2-20/0.01]
H-PJ4L25-[40-100/10]-P[6-24.9/0.01]-W[6-24.9/0.01]-A[1-24/0.01]-R[0.2-40/0.01]-S[0.2-20/0.01]
H-PJ4L25-LC[37-99.9/0.1]-P[6-24.9/0.01]-W[6-24.9/0.01]-A[1-24/0.01]-R0-S[0.2-20/0.01]
H-PJ4L25-LC[37-99.9/0.1]-P[6-24.9/0.01]-W[6-24.9/0.01]-A[1-24/0.01]-R[0.2-40/0.01]-S[0.2-20/0.01]
H-SJ-C4L10-[60-100/10]-P[3-10/0.01]-W[3-10/0.01]-A[0.5-8.5/0.01]-R0-S[0.2-20/0.01]
H-SJ-C4L10-[60-100/10]-P[3-10/0.01]-W[3-10/0.01]-A[0.5-8.5/0.01]-R[0.2-40/0.01]-S[0.2-20/0.01]
H-SJ-C4L10-LC[60.1-99.7/0.1]-P[3-10/0.01]-W[3-10/0.01]-A[0.5-8.5/0.01]-R0-S[0.2-20/0.01]
H-SJ-C4L10-LC[60.1-99.7/0.1]-P[3-10/0.01]-W[3-10/0.01]-A[0.5-8.5/0.01]-R[0.2-40/0.01]-S[0.2-20/0.01]
H-SJ-C4L13-[60-100/10]-P[6-13/0.01]-W[6-13/0.01]-A[0.5-11.5/0.01]-R[0.2-40/0.01]-S[0.2-20/0.01]
H-SJ-C4L13-LC[60.1-99.7/0.1]-P[6-13/0.01]-W[6-13/0.01]-A[0.5-11.5/0.01]-R[0.2-40/0.01]-S[0.2-20/0.01]
H-SJ-C4L16-[60-100/10]-P[6-16/0.01]-W[6-16/0.01]-A[0.5-13.5/0.01]-R[0.2-40/0.01]-S[0.2-20/0.01]
H-SJ-C4L16-LC[60.1-99.7/0.1]-P[6-16/0.01]-W[6-16/0.01]-A[0.5-13.5/0.01]-R[0.2-40/0.01]-S[0.2-20/0.01]
H-SJ-C4L20-[60-100/10]-P[6-20/0.01]-W[6-20/0.01]-A[0.5-18.5/0.01]-R[0.2-40/0.01]-S[0.2-20/0.01]
H-SJ-C4L20-LC[60.1-99.7/0.1]-P[6-20/0.01]-W[6-20/0.01]-A[0.5-18.5/0.01]-R[0.2-40/0.01]-S[0.2-20/0.01]
H-SJ-C4L25-[60-100/10]-P[6-25/0.01]-W[6-25/0.01]-A[0.5-24.5/0.01]-R[0.2-40/0.01]-S[0.2-20/0.01]
H-SJ-C4L25-LC[60.1-99.7/0.1]-P[6-25/0.01]-W[6-25/0.01]-A[0.5-24.5/0.01]-R[0.2-40/0.01]-S[0.2-20/0.01]
HW-PJ4L5-[40-80/10]-P[2-4.9/0.01]-W[2-4.9/0.01]-A[1-4/0.01]-R0-S[0.2-20/0.01]
HW-PJ4L5-[40-80/10]-P[2-4.9/0.01]-W[2-4.9/0.01]-A[1-4/0.01]-R[0.2-40/0.01]-S[0.2-20/0.01]
HW-PJ4L5-LC[36-79.9/0.1]-P[2-4.9/0.01]-W[2-4.9/0.01]-A[1-4/0.01]-R0-S[0.2-20/0.01]
HW-PJ4L5-LC[36-79.9/0.1]-P[2-4.9/0.01]-W[2-4.9/0.01]-A[1-4/0.01]-R[0.2-40/0.01]-S[0.2-20/0.01]
HW-PJ4L6-[40-80/10]-P[2-5.9/0.01]-W[2-5.9/0.01]-A[1-5/0.01]-R0-S[0.2-20/0.01]
HW-PJ4L6-[40-80/10]-P[2-5.9/0.01]-W[2-5.9/0.01]-A[1-5/0.01]-R[0.2-40/0.01]-S[0.2-20/0.01]
HW-PJ4L6-LC[36-79.9/0.1]-P[2-5.9/0.01]-W[2-5.9/0.01]-A[1-5/0.01]-R0-S[0.2-20/0.01]
HW-PJ4L6-LC[36-79.9/0.1]-P[2-5.9/0.01]-W[2-5.9/0.01]-A[1-5/0.01]-R[0.2-40/0.01]-S[0.2-20/0.01]
HW-PJ4L8-[40-100/10]-P[3-7.9/0.01]-W[3-7.9/0.01]-A[1-7/0.01]-R0-S[0.2-20/0.01]
HW-PJ4L8-[40-100/10]-P[3-7.9/0.01]-W[3-7.9/0.01]-A[1-7/0.01]-R[0.2-40/0.01]-S[0.2-20/0.01]
HW-PJ4L8-LC[36-99.9/0.1]-P[3-7.9/0.01]-W[3-7.9/0.01]-A[1-7/0.01]-R0-S[0.2-20/0.01]
HW-PJ4L8-LC[36-99.9/0.1]-P[3-7.9/0.01]-W[3-7.9/0.01]-A[1-7/0.01]-R[0.2-40/0.01]-S[0.2-20/0.01]
HW-PJ4L10-[40-100/10]-P[3-9.9/0.01]-W[3-9.9/0.01]-A[1-9/0.01]-R0-S[0.2-20/0.01]
HW-PJ4L10-[40-100/10]-P[3-9.9/0.01]-W[3-9.9/0.01]-A[1-9/0.01]-R[0.2-40/0.01]-S[0.2-20/0.01]
HW-PJ4L10-LC[36-99.9/0.1]-P[3-9.9/0.01]-W[3-9.9/0.01]-A[1-9/0.01]-R0-S[0.2-20/0.01]
HW-PJ4L10-LC[36-99.9/0.1]-P[3-9.9/0.01]-W[3-9.9/0.01]-A[1-9/0.01]-R[0.2-40/0.01]-S[0.2-20/0.01]
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSTip shape Material Surface treatment Punch shank (mounting part) shape D (Outer diameter)
(mm) 		A
(mm) 		B
(mm) 		C
(mm) 		L (L dimension)
(mm) 		LC (Full length alteration)
(mm) 		P
(mm) 		Q
(mm) 		R
(mm) 		S
(mm) 		W
(mm)

-

1 Quote 104LPowdered high-speed steelTiCNStandard51 ～ 4--40 ～ 80-2 ～ 4.9-00.2 ～ 202 ～ 4.9

-

1 Quote 104LPowdered high-speed steelTiCNStandard51 ～ 4--40 ～ 80-2 ～ 4.9-0.2 ～ 400.2 ～ 202 ～ 4.9

-

1 Quote 104LPowdered high-speed steelTiCNStandard51 ～ 4---37 ～ 79.92 ～ 4.9-00.2 ～ 202 ～ 4.9

-

1 Quote 104LPowdered high-speed steelTiCNStandard51 ～ 4---37 ～ 79.92 ～ 4.9-0.2 ～ 400.2 ～ 202 ～ 4.9

-

1 Quote 104LPowdered high-speed steelTiCNStandard61 ～ 5--40 ～ 80-2 ～ 5.9-00.2 ～ 202 ～ 5.9

-

1 Quote 104LPowdered high-speed steelTiCNStandard61 ～ 5--40 ～ 80-2 ～ 5.9-0.2 ～ 400.2 ～ 202 ～ 5.9

-

1 Quote 104LPowdered high-speed steelTiCNStandard61 ～ 5---37 ～ 79.92 ～ 5.9-00.2 ～ 202 ～ 5.9

-

1 Quote 104LPowdered high-speed steelTiCNStandard61 ～ 5---37 ～ 79.92 ～ 5.9-0.2 ～ 400.2 ～ 202 ～ 5.9

-

1 Quote 104LPowdered high-speed steelTiCNStandard81 ～ 7--40 ～ 100-3 ～ 7.9-00.2 ～ 203 ～ 7.9

-

1 Quote 104LPowdered high-speed steelTiCNStandard81 ～ 7--40 ～ 100-3 ～ 7.9-0.2 ～ 400.2 ～ 203 ～ 7.9

-

1 Quote 104LPowdered high-speed steelTiCNStandard81 ～ 7---37 ～ 99.93 ～ 7.9-00.2 ～ 203 ～ 7.9

-

1 Quote 104LPowdered high-speed steelTiCNStandard81 ～ 7---37 ～ 99.93 ～ 7.9-0.2 ～ 400.2 ～ 203 ～ 7.9

-

1 Quote 104LPowdered high-speed steelTiCNStandard101 ～ 9--40 ～ 100-3 ～ 9.9-00.2 ～ 203 ～ 9.9

-

1 Quote 104LPowdered high-speed steelTiCNStandard101 ～ 9--40 ～ 100-3 ～ 9.9-0.2 ～ 400.2 ～ 203 ～ 9.9

-

1 Quote 104LPowdered high-speed steelTiCNStandard101 ～ 9---37 ～ 99.93 ～ 9.9-00.2 ～ 203 ～ 9.9

-

1 Quote 104LPowdered high-speed steelTiCNStandard101 ～ 9---37 ～ 99.93 ～ 9.9-0.2 ～ 400.2 ～ 203 ～ 9.9

-

1 Quote 104LPowdered high-speed steelTiCNStandard131 ～ 12--40 ～ 100-6 ～ 12.9-00.2 ～ 206 ～ 12.9

-

1 Quote 104LPowdered high-speed steelTiCNStandard131 ～ 12--40 ～ 100-6 ～ 12.9-0.2 ～ 400.2 ～ 206 ～ 12.9

-

1 Quote 104LPowdered high-speed steelTiCNStandard131 ～ 12---37 ～ 99.96 ～ 12.9-00.2 ～ 206 ～ 12.9

-

1 Quote 104LPowdered high-speed steelTiCNStandard131 ～ 12---37 ～ 99.96 ～ 12.9-0.2 ～ 400.2 ～ 206 ～ 12.9

-

1 Quote 104LPowdered high-speed steelTiCNStandard161 ～ 15--40 ～ 100-6 ～ 15.9-00.2 ～ 206 ～ 15.9

-

1 Quote 104LPowdered high-speed steelTiCNStandard161 ～ 15--40 ～ 100-6 ～ 15.9-0.2 ～ 400.2 ～ 206 ～ 15.9

-

1 Quote 104LPowdered high-speed steelTiCNStandard161 ～ 15---37 ～ 99.96 ～ 15.9-00.2 ～ 206 ～ 15.9

-

1 Quote 104LPowdered high-speed steelTiCNStandard161 ～ 15---37 ～ 99.96 ～ 15.9-0.2 ～ 400.2 ～ 206 ～ 15.9

-

1 Quote 104LPowdered high-speed steelTiCNStandard201 ～ 19--40 ～ 100-6 ～ 19.9-00.2 ～ 206 ～ 19.9

-

1 Quote 104LPowdered high-speed steelTiCNStandard201 ～ 19--40 ～ 100-6 ～ 19.9-0.2 ～ 400.2 ～ 206 ～ 19.9

-

1 Quote 104LPowdered high-speed steelTiCNStandard201 ～ 19---37 ～ 99.96 ～ 19.9-00.2 ～ 206 ～ 19.9

-

1 Quote 104LPowdered high-speed steelTiCNStandard201 ～ 19---37 ～ 99.96 ～ 19.9-0.2 ～ 400.2 ～ 206 ～ 19.9

-

1 Quote 104LPowdered high-speed steelTiCNStandard251 ～ 24--40 ～ 100-6 ～ 24.9-00.2 ～ 206 ～ 24.9

-

1 Quote 104LPowdered high-speed steelTiCNStandard251 ～ 24--40 ～ 100-6 ～ 24.9-0.2 ～ 400.2 ～ 206 ～ 24.9

-

1 Quote 104LPowdered high-speed steelTiCNStandard251 ～ 24---37 ～ 99.96 ～ 24.9-00.2 ～ 206 ～ 24.9

-

1 Quote 104LPowdered high-speed steelTiCNStandard251 ～ 24---37 ～ 99.96 ～ 24.9-0.2 ～ 400.2 ～ 206 ～ 24.9

-

1 Quote 104LSKD11 EquivalentTiCNWith locating dowel hole100.5 ～ 8.5--60 ～ 100-3 ～ 10-00.2 ～ 203 ～ 10

-

1 Quote 104LSKD11 EquivalentTiCNWith locating dowel hole100.5 ～ 8.5--60 ～ 100-3 ～ 10-0.2 ～ 400.2 ～ 203 ～ 10

-

1 Quote 104LSKD11 EquivalentTiCNWith locating dowel hole100.5 ～ 8.5---60.1 ～ 99.73 ～ 10-00.2 ～ 203 ～ 10

-

1 Quote 104LSKD11 EquivalentTiCNWith locating dowel hole100.5 ～ 8.5---60.1 ～ 99.73 ～ 10-0.2 ～ 400.2 ～ 203 ～ 10

-

1 Quote 104LSKD11 EquivalentTiCNWith locating dowel hole130.5 ～ 11.5--60 ～ 100-6 ～ 13-0.2 ～ 400.2 ～ 206 ～ 13

-

1 Quote 104LSKD11 EquivalentTiCNWith locating dowel hole130.5 ～ 11.5---60.1 ～ 99.76 ～ 13-0.2 ～ 400.2 ～ 206 ～ 13

-

1 Quote 104LSKD11 EquivalentTiCNWith locating dowel hole160.5 ～ 13.5--60 ～ 100-6 ～ 16-0.2 ～ 400.2 ～ 206 ～ 16

-

1 Quote 104LSKD11 EquivalentTiCNWith locating dowel hole160.5 ～ 13.5---60.1 ～ 99.76 ～ 16-0.2 ～ 400.2 ～ 206 ～ 16

-

1 Quote 104LSKD11 EquivalentTiCNWith locating dowel hole200.5 ～ 18.5--60 ～ 100-6 ～ 20-0.2 ～ 400.2 ～ 206 ～ 20

-

1 Quote 104LSKD11 EquivalentTiCNWith locating dowel hole200.5 ～ 18.5---60.1 ～ 99.76 ～ 20-0.2 ～ 400.2 ～ 206 ～ 20

-

1 Quote 104LSKD11 EquivalentTiCNWith locating dowel hole250.5 ～ 24.5--60 ～ 100-6 ～ 25-0.2 ～ 400.2 ～ 206 ～ 25

-

1 Quote 104LSKD11 EquivalentTiCNWith locating dowel hole250.5 ～ 24.5---60.1 ～ 99.76 ～ 25-0.2 ～ 400.2 ～ 206 ～ 25

-

1 Quote 104LPowdered high-speed steelHW coatingStandard51 ～ 4--40 ～ 80-2 ～ 4.9-00.2 ～ 202 ～ 4.9

-

1 Quote 104LPowdered high-speed steelHW coatingStandard51 ～ 4--40 ～ 80-2 ～ 4.9-0.2 ～ 400.2 ～ 202 ～ 4.9

-

1 Quote 104LPowdered high-speed steelHW coatingStandard51 ～ 4---36 ～ 79.92 ～ 4.9-00.2 ～ 202 ～ 4.9

-

1 Quote 104LPowdered high-speed steelHW coatingStandard51 ～ 4---36 ～ 79.92 ～ 4.9-0.2 ～ 400.2 ～ 202 ～ 4.9

-

1 Quote 104LPowdered high-speed steelHW coatingStandard61 ～ 5--40 ～ 80-2 ～ 5.9-00.2 ～ 202 ～ 5.9

-

1 Quote 104LPowdered high-speed steelHW coatingStandard61 ～ 5--40 ～ 80-2 ～ 5.9-0.2 ～ 400.2 ～ 202 ～ 5.9

-

1 Quote 104LPowdered high-speed steelHW coatingStandard61 ～ 5---36 ～ 79.92 ～ 5.9-00.2 ～ 202 ～ 5.9

-

1 Quote 104LPowdered high-speed steelHW coatingStandard61 ～ 5---36 ～ 79.92 ～ 5.9-0.2 ～ 400.2 ～ 202 ～ 5.9

-

1 Quote 104LPowdered high-speed steelHW coatingStandard81 ～ 7--40 ～ 100-3 ～ 7.9-00.2 ～ 203 ～ 7.9

-

1 Quote 104LPowdered high-speed steelHW coatingStandard81 ～ 7--40 ～ 100-3 ～ 7.9-0.2 ～ 400.2 ～ 203 ～ 7.9

-

1 Quote 104LPowdered high-speed steelHW coatingStandard81 ～ 7---36 ～ 99.93 ～ 7.9-00.2 ～ 203 ～ 7.9

-

1 Quote 104LPowdered high-speed steelHW coatingStandard81 ～ 7---36 ～ 99.93 ～ 7.9-0.2 ～ 400.2 ～ 203 ～ 7.9

-

1 Quote 104LPowdered high-speed steelHW coatingStandard101 ～ 9--40 ～ 100-3 ～ 9.9-00.2 ～ 203 ～ 9.9

-

1 Quote 104LPowdered high-speed steelHW coatingStandard101 ～ 9--40 ～ 100-3 ～ 9.9-0.2 ～ 400.2 ～ 203 ～ 9.9

-

1 Quote 104LPowdered high-speed steelHW coatingStandard101 ～ 9---36 ～ 99.93 ～ 9.9-00.2 ～ 203 ～ 9.9

-

1 Quote 104LPowdered high-speed steelHW coatingStandard101 ～ 9---36 ～ 99.93 ～ 9.9-0.2 ～ 400.2 ～ 203 ～ 9.9

Loading...

  1. 1
  2. 2
  3. 3
  4. Next >>
 

Basic information

Type Jector punch

Configure

Clear all

168Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Material

    • SKD11 Equivalent
    • SKH51 Equivalent
    • Powdered high-speed steel

    Clear

  • Surface treatment

    • TiCN
    • HW coating
    • WPC

    Clear

  • Punch shank (mounting part) shape

    • Standard
    • With locating dowel hole

    Clear

  • D (Outer diameter)(mm)

    • 5
    • 6
    • 8
    • 10
    • 13
    • 16
    • 20
    • 25
    • 32
    • 38
    • 45

    Clear

  • A(mm)

     [0.5-24.5/0.01mm Unit(s)]

    Clear

  • B(mm)

     

    Clear

  • C(mm)

    • 0

     

    Clear

  • L (L dimension)(mm)

    • 40
    • 50
    • 60
    • 70
    • 80
    • 90
    • 100

     [40-120/10mm Unit(s)]

    Clear

  • LC (Full length alteration)(mm)

    • LC

     [36-119.9/0.1mm Unit(s)]

    Clear

  • P(mm)

     [2-30/0.01mm Unit(s)]

    Clear

  • Q(mm)

    • 0

     

    Clear

  • R(mm)

    • 0

     [0.2-40/0.01mm Unit(s)]

    Clear

  • S(mm)

    • 0

     [0.2-20/0.01mm Unit(s)]

    Clear

  • W(mm)

     [2-30/0.01mm Unit(s)]

    Clear

  • Type

    • H-PJ(2-12)H
    • H-PJ(2-18)J
    • H-PJ(2-7)L
    • H-PJ(3-29)K
    • H-SJ-C(2-12)H
    • H-SJ-C(2-18)J
    • H-SJ-C(2-8)L
    • H-SJ-C(3-29)K
    • HW-PJ-H
    • HW-PJ-J
    • HW-PJ-K
    • HW-PJ-L
    • HW-SJ-C(2-12)H
    • HW-SJ-C(2-18)J
    • HW-SJ-C(2-8)L
    • HW-SJ-C(3-29)K
    • W-PJ-H
    • W-PJ-J
    • W-PJ-K
    • W-PJ-L
    • W-SJ-C-H
    • W-SJ-C-J
    • W-SJ-C-K
    • W-SJ-C-L
    • W-SJ-H
    • W-SJ-J
    • W-SJ-K
    • W-SJ-L

    Clear

  • Tip shape

    • 2H
    • 2J
    • 2L
    • 3J
    • 3K
    • 3L
    • 4H
    • 4J
    • 4K
    • 4L
    • 5H
    • 5J
    • 5L
    • 6H
    • 6K
    • 7H
    • 7L
    • 8H
    • 8J
    • 8K
    • 8L
    • 9H
    • 9J
    • 9K
    • 10H
    • 11H
    • 11J
    • 12H
    • 12J
    • 13K
    • 14J
    • 14K
    • 15J
    • 15K
    • 16J
    • 17J
    • 17K
    • 18J
    • 20K
    • 21K
    • 22K
    • 23K
    • 25K
    • 27K
    • 28K
    • 29K

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Optional Attributes

Tech Support

Technical Inquiry

Betalningsmetod

Faktura

Förskottsbetalning

PayPal

Behovsstyrd tillverkning

Ändra vy

Certifikat

  • ISO-9001
  • ISO-14001
  • AEO-certifiering
  • RoHS
  • REACH

MISUMI världen över

Sociala medier

Juridiskt meddelande

Copyright © MISUMI Corporation All Rights Reserved.