• Märken
  • Företag
  • Kontakt
SV
Type Code Seach | *NOT READY*
#CODE
Förslag på nyckelord
Förslag på artikelnummer
Discontinued Products

Ejector sleeves / steel / length configurable / concentricity 0.01

Ejector sleeves / steel / length configurable / concentricity 0.01

Click on this image to zoom in.

Click on this image to zoom in.

MISUMI

MISUMI

Data sheet

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
  2. 2
  3. Next >>
Part Number
ESVK-H3.5-[40-225/0.01]-V[0.8-2.3/0.01]-S[1-23/0.5]
ESVK-H4-[40-225/0.01]-V[0.8-2.8/0.01]-S[1-28/0.5]
ESVK-H5-[40-225/0.01]-V[0.8-3.8/0.01]-S[1-38/0.5]
ESVK-H6-[40-225/0.01]-V[0.8-4.8/0.01]-S[1-48/0.5]
ESVK-H7-[40-225/0.01]-V[0.8-5.8/0.01]-S[1-50/0.5]
ESVK-H8-[40-250/0.01]-V[2-6.2/0.01]-S[1-50/0.5]
ESVK-H9-[40-250/0.01]-V[2-7.2/0.01]-S[1-50/0.5]
ESVK-H10-[40-250/0.01]-V[2-8.2/0.01]-S[1-50/0.5]
ESVK-H11-[40-250/0.01]-V[2-9.2/0.01]-S[1-50/0.5]
ESVK-H12-[40-250/0.01]-V[2-10.2/0.01]-S[1-50/0.5]
ESVK-H13-[40-250/0.01]-V[2-11.2/0.01]-S[1-50/0.5]
ESVK-H14-[40-250/0.01]-V[2-12.2/0.01]-S[1-50/0.5]
ESVK-M3.5-[40-225/0.01]-V[0.8-2.3/0.01]-S[1-23/0.5]
ESVK-M4-[40-225/0.01]-V[0.8-2.8/0.01]-S[1-28/0.5]
ESVK-M5-[40-225/0.01]-V[0.8-3.8/0.01]-S[1-38/0.5]
ESVK-M6-[40-225/0.01]-V[0.8-4.8/0.01]-S[1-48/0.5]
ESVK-M7-[40-225/0.01]-V[0.8-5.8/0.01]-S[1-50/0.5]
ESVK-M8-[40-250/0.01]-V[2-6.2/0.01]-S[1-50/0.5]
ESVK-M9-[40-250/0.01]-V[2-7.2/0.01]-S[1-50/0.5]
ESVK-M10-[40-250/0.01]-V[2-8.2/0.01]-S[1-50/0.5]
ESVK-M11-[40-250/0.01]-V[2-9.2/0.01]-S[1-50/0.5]
ESVK-M12-[40-250/0.01]-V[2-10.2/0.01]-S[1-50/0.5]
ESVK-M13-[40-250/0.01]-V[2-11.2/0.01]-S[1-50/0.5]
ESVK-M14-[40-250/0.01]-V[2-12.2/0.01]-S[1-50/0.5]
ESVKB-H4-[40-225/0.01]-P[3.2-3.99/0.01]-V[0.8-2.79/0.01]-S[1-27.5/0.5]
ESVKB-H5-[40-225/0.01]-P[4-4.99/0.01]-V[0.8-3.79/0.01]-S[1-37.5/0.5]
ESVKB-H6-[40-225/0.01]-P[5-5.99/0.01]-V[0.8-4.79/0.01]-S[1-47.5/0.5]
ESVKB-H7-[40-225/0.01]-P[6-6.99/0.01]-V[0.8-5.79/0.01]-S[1-50/0.5]
ESVKB-H8-[40-250/0.01]-P[7-7.99/0.01]-V[2-6.19/0.01]-S[1-50/0.5]
ESVKB-H9-[40-250/0.01]-P[8-8.99/0.01]-V[2-7.19/0.01]-S[1-50/0.5]
ESVKB-H10-[40-250/0.01]-P[9-9.99/0.01]-V[2-8.19/0.01]-S[1-50/0.5]
ESVKB-H11-[40-250/0.01]-P[10-10.99/0.01]-V[2-9.19/0.01]-S[1-50/0.5]
ESVKB-H12-[40-250/0.01]-P[11-11.99/0.01]-V[2-10.19/0.01]-S[1-50/0.5]
ESVKB-H13-[40-250/0.01]-P[12-12.99/0.01]-V[2-11.19/0.01]-S[1-50/0.5]
ESVKB-H14-[40-250/0.01]-P[13-13.99/0.01]-V[2-12.19/0.01]-S[1-50/0.5]
ESVKB-M4-[40-225/0.01]-P[3.2-3.99/0.01]-V[0.8-2.79/0.01]-S[1-27.5/0.5]
ESVKB-M5-[40-225/0.01]-P[4-4.99/0.01]-V[0.8-3.79/0.01]-S[1-37.5/0.5]
ESVKB-M6-[40-225/0.01]-P[5-5.99/0.01]-V[0.8-4.79/0.01]-S[1-47.5/0.5]
ESVKB-M7-[40-225/0.01]-P[6-6.99/0.01]-V[0.8-5.79/0.01]-S[1-50/0.5]
ESVKB-M8-[40-250/0.01]-P[7-7.99/0.01]-V[2-6.19/0.01]-S[1-50/0.5]
ESVKB-M9-[40-250/0.01]-P[8-8.99/0.01]-V[2-7.19/0.01]-S[1-50/0.5]
ESVKB-M10-[40-250/0.01]-P[9-9.99/0.01]-V[2-8.19/0.01]-S[1-50/0.5]
ESVKB-M11-[40-250/0.01]-P[10-10.99/0.01]-V[2-9.19/0.01]-S[1-50/0.5]
ESVKB-M12-[40-250/0.01]-P[11-11.99/0.01]-V[2-10.19/0.01]-S[1-50/0.5]
ESVKB-M13-[40-250/0.01]-P[12-12.99/0.01]-V[2-11.19/0.01]-S[1-50/0.5]
ESVKB-M14-[40-250/0.01]-P[13-13.99/0.01]-V[2-12.19/0.01]-S[1-50/0.5]
ESVKJ-H6-[40-225/0.01]-V[0.8-4.8/0.01]-S[1-48/0.5]
ESVKJ-H7-[40-225/0.01]-V[0.8-5.8/0.01]-S[1-50/0.5]
ESVKJ-H8-[40-250/0.01]-V[2-6.2/0.01]-S[1-50/0.5]
ESVKJ-H9-[40-250/0.01]-V[2-7.2/0.01]-S[1-50/0.5]
ESVKJ-H10-[40-250/0.01]-V[2-8.2/0.01]-S[1-50/0.5]
ESVKJ-H11-[40-250/0.01]-V[2-9.2/0.01]-S[1-50/0.5]
ESVKJ-H12-[40-250/0.01]-V[2-10.2/0.01]-S[1-50/0.5]
ESVKJ-H13-[40-250/0.01]-V[2-11.2/0.01]-S[1-50/0.5]
ESVKJ-H14-[40-250/0.01]-V[2-12.2/0.01]-S[1-50/0.5]
ESVKJB-H6-[40-225/0.01]-P[5-5.99/0.01]-V[0.8-4.79/0.01]-S[1-47.5/0.5]
ESVKJB-H7-[40-225/0.01]-P[6-6.99/0.01]-V[0.8-5.79/0.01]-S[1-50/0.5]
ESVKJB-H8-[40-250/0.01]-P[7-7.99/0.01]-V[2-6.19/0.01]-S[1-50/0.5]
ESVKJB-H9-[40-250/0.01]-P[8-8.99/0.01]-V[2-7.19/0.01]-S[1-50/0.5]
ESVKJB-H10-[40-250/0.01]-P[9-9.99/0.01]-V[2-8.19/0.01]-S[1-50/0.5]
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSHead thickness Shaft diameter tolerance D/P (Shaft diameter)
(mm) 		V (Hole diameter)
(mm) 		Boring method Shaft diameter designation method L (L dimension)
(mm) 		S (V hole diameter length)
(mm)

-

1 Quote 104mm(T4)0/-0.0053.50.8 ～ 2.3Wire cutting & polishingShaft diameter selection40 ～ 2251 ～ 23

-

1 Quote 104mm(T4)0/-0.00540.8 ～ 2.8Wire cutting & polishingShaft diameter selection40 ～ 2251 ～ 28

-

1 Quote 104mm(T4)0/-0.00550.8 ～ 3.8Wire cutting & polishingShaft diameter selection40 ～ 2251 ～ 38

-

1 Quote 104mm(T4)0/-0.00560.8 ～ 4.8Wire cutting & polishingShaft diameter selection40 ～ 2251 ～ 48

-

1 Quote 104mm(T4)0/-0.00570.8 ～ 5.8Wire cutting & polishingShaft diameter selection40 ～ 2251 ～ 50

-

1 Quote 104mm(T4)0/-0.00582 ～ 6.2Wire cutting & polishingShaft diameter selection40 ～ 2501 ～ 50

-

1 Quote 104mm(T4)0/-0.00592 ～ 7.2Wire cutting & polishingShaft diameter selection40 ～ 2501 ～ 50

-

1 Quote 104mm(T4)0/-0.005102 ～ 8.2Wire cutting & polishingShaft diameter selection40 ～ 2501 ～ 50

-

1 Quote 104mm(T4)0/-0.005112 ～ 9.2Wire cutting & polishingShaft diameter selection40 ～ 2501 ～ 50

-

1 Quote 104mm(T4)0/-0.005122 ～ 10.2Wire cutting & polishingShaft diameter selection40 ～ 2501 ～ 50

-

1 Quote 104mm(T4)0/-0.005132 ～ 11.2Wire cutting & polishingShaft diameter selection40 ～ 2501 ～ 50

-

1 Quote 104mm(T4)0/-0.005142 ～ 12.2Wire cutting & polishingShaft diameter selection40 ～ 2501 ～ 50

-

1 Quote 104mm(T4)-0.01/-0.023.50.8 ～ 2.3-Shaft diameter selection40 ～ 2251 ～ 23

-

1 Quote 104mm(T4)-0.01/-0.0240.8 ～ 2.8-Shaft diameter selection40 ～ 2251 ～ 28

-

1 Quote 104mm(T4)-0.01/-0.0250.8 ～ 3.8-Shaft diameter selection40 ～ 2251 ～ 38

-

1 Quote 104mm(T4)-0.01/-0.0260.8 ～ 4.8-Shaft diameter selection40 ～ 2251 ～ 48

-

1 Quote 104mm(T4)-0.01/-0.0270.8 ～ 5.8-Shaft diameter selection40 ～ 2251 ～ 50

-

1 Quote 104mm(T4)-0.01/-0.0282 ～ 6.2-Shaft diameter selection40 ～ 2501 ～ 50

-

1 Quote 104mm(T4)-0.01/-0.0292 ～ 7.2-Shaft diameter selection40 ～ 2501 ～ 50

-

1 Quote 104mm(T4)-0.01/-0.02102 ～ 8.2-Shaft diameter selection40 ～ 2501 ～ 50

-

1 Quote 104mm(T4)-0.01/-0.02112 ～ 9.2-Shaft diameter selection40 ～ 2501 ～ 50

-

1 Quote 104mm(T4)-0.01/-0.02122 ～ 10.2-Shaft diameter selection40 ～ 2501 ～ 50

-

1 Quote 104mm(T4)-0.01/-0.02132 ～ 11.2-Shaft diameter selection40 ～ 2501 ～ 50

-

1 Quote 104mm(T4)-0.01/-0.02142 ～ 12.2-Shaft diameter selection40 ～ 2501 ～ 50

-

1 Quote 104mm(T4)0/-0.0053.2 ～ 3.990.8 ～ 2.79Wire cutting & polishingShaft diameter 0.01mm increments40 ～ 2251 ～ 27.5

-

1 Quote 104mm(T4)0/-0.0054 ～ 4.990.8 ～ 3.79Wire cutting & polishingShaft diameter 0.01mm increments40 ～ 2251 ～ 37.5

-

1 Quote 104mm(T4)0/-0.0055 ～ 5.990.8 ～ 4.79Wire cutting & polishingShaft diameter 0.01mm increments40 ～ 2251 ～ 47.5

-

1 Quote 104mm(T4)0/-0.0056 ～ 6.990.8 ～ 5.79Wire cutting & polishingShaft diameter 0.01mm increments40 ～ 2251 ～ 50

-

1 Quote 104mm(T4)0/-0.0057 ～ 7.992 ～ 6.19Wire cutting & polishingShaft diameter 0.01mm increments40 ～ 2501 ～ 50

-

1 Quote 104mm(T4)0/-0.0058 ～ 8.992 ～ 7.19Wire cutting & polishingShaft diameter 0.01mm increments40 ～ 2501 ～ 50

-

1 Quote 104mm(T4)0/-0.0059 ～ 9.992 ～ 8.19Wire cutting & polishingShaft diameter 0.01mm increments40 ～ 2501 ～ 50

-

1 Quote 104mm(T4)0/-0.00510 ～ 10.992 ～ 9.19Wire cutting & polishingShaft diameter 0.01mm increments40 ～ 2501 ～ 50

-

1 Quote 104mm(T4)0/-0.00511 ～ 11.992 ～ 10.19Wire cutting & polishingShaft diameter 0.01mm increments40 ～ 2501 ～ 50

-

1 Quote 104mm(T4)0/-0.00512 ～ 12.992 ～ 11.19Wire cutting & polishingShaft diameter 0.01mm increments40 ～ 2501 ～ 50

-

1 Quote 104mm(T4)0/-0.00513 ～ 13.992 ～ 12.19Wire cutting & polishingShaft diameter 0.01mm increments40 ～ 2501 ～ 50

-

1 Quote 104mm(T4)-0.01/-0.023.2 ～ 3.990.8 ～ 2.79-Shaft diameter 0.01mm increments40 ～ 2251 ～ 27.5

-

1 Quote 104mm(T4)-0.01/-0.024 ～ 4.990.8 ～ 3.79-Shaft diameter 0.01mm increments40 ～ 2251 ～ 37.5

-

1 Quote 104mm(T4)-0.01/-0.025 ～ 5.990.8 ～ 4.79-Shaft diameter 0.01mm increments40 ～ 2251 ～ 47.5

-

1 Quote 104mm(T4)-0.01/-0.026 ～ 6.990.8 ～ 5.79-Shaft diameter 0.01mm increments40 ～ 2251 ～ 50

-

1 Quote 104mm(T4)-0.01/-0.027 ～ 7.992 ～ 6.19-Shaft diameter 0.01mm increments40 ～ 2501 ～ 50

-

1 Quote 104mm(T4)-0.01/-0.028 ～ 8.992 ～ 7.19-Shaft diameter 0.01mm increments40 ～ 2501 ～ 50

-

1 Quote 104mm(T4)-0.01/-0.029 ～ 9.992 ～ 8.19-Shaft diameter 0.01mm increments40 ～ 2501 ～ 50

-

1 Quote 104mm(T4)-0.01/-0.0210 ～ 10.992 ～ 9.19-Shaft diameter 0.01mm increments40 ～ 2501 ～ 50

-

1 Quote 104mm(T4)-0.01/-0.0211 ～ 11.992 ～ 10.19-Shaft diameter 0.01mm increments40 ～ 2501 ～ 50

-

1 Quote 104mm(T4)-0.01/-0.0212 ～ 12.992 ～ 11.19-Shaft diameter 0.01mm increments40 ～ 2501 ～ 50

-

1 Quote 104mm(T4)-0.01/-0.0213 ～ 13.992 ～ 12.19-Shaft diameter 0.01mm increments40 ～ 2501 ～ 50

-

1 Quote 106mm(JIS)0/-0.00560.8 ～ 4.8Wire cutting & polishingShaft diameter selection40 ～ 2251 ～ 48

-

1 Quote 106mm(JIS)0/-0.00570.8 ～ 5.8Wire cutting & polishingShaft diameter selection40 ～ 2251 ～ 50

-

1 Quote 108mm(JIS)0/-0.00582 ～ 6.2Wire cutting & polishingShaft diameter selection40 ～ 2501 ～ 50

-

1 Quote 108mm(JIS)0/-0.00592 ～ 7.2Wire cutting & polishingShaft diameter selection40 ～ 2501 ～ 50

-

1 Quote 108mm(JIS)0/-0.005102 ～ 8.2Wire cutting & polishingShaft diameter selection40 ～ 2501 ～ 50

-

1 Quote 108mm(JIS)0/-0.005112 ～ 9.2Wire cutting & polishingShaft diameter selection40 ～ 2501 ～ 50

-

1 Quote 108mm(JIS)0/-0.005122 ～ 10.2Wire cutting & polishingShaft diameter selection40 ～ 2501 ～ 50

-

1 Quote 108mm(JIS)0/-0.005132 ～ 11.2Wire cutting & polishingShaft diameter selection40 ～ 2501 ～ 50

-

1 Quote 108mm(JIS)0/-0.005142 ～ 12.2Wire cutting & polishingShaft diameter selection40 ～ 2501 ～ 50

-

1 Quote 106mm(JIS)0/-0.0055 ～ 5.990.8 ～ 4.79Wire cutting & polishingShaft diameter 0.01mm increments40 ～ 2251 ～ 47.5

-

1 Quote 106mm(JIS)0/-0.0056 ～ 6.990.8 ～ 5.79Wire cutting & polishingShaft diameter 0.01mm increments40 ～ 2251 ～ 50

-

1 Quote 108mm(JIS)0/-0.0057 ～ 7.992 ～ 6.19Wire cutting & polishingShaft diameter 0.01mm increments40 ～ 2501 ～ 50

-

1 Quote 108mm(JIS)0/-0.0058 ～ 8.992 ～ 7.19Wire cutting & polishingShaft diameter 0.01mm increments40 ～ 2501 ～ 50

-

1 Quote 108mm(JIS)0/-0.0059 ～ 9.992 ～ 8.19Wire cutting & polishingShaft diameter 0.01mm increments40 ～ 2501 ～ 50

Loading...

  1. 1
  2. 2
  3. Next >>
 

Basic information

Product composition Single sleeve Material EN 1.3343 Equiv. Surface treatment No
Concentricity between the hole and shaft diameters ◎0.01 Inner dia. tolerance +0.01/0 Tapered or not No
Center pin tip shape No Technical Standard JIS

Configure

Clear all

64Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Head thickness

    • 4mm(T4)
    • 6mm(JIS)
    • 8mm(JIS)

    Clear

  • Shaft diameter tolerance

    • 0/-0.005
    • -0.01/-0.02

    Clear

  • D/P (Shaft diameter)(mm)

    • 3.5
    • 4
    • 5
    • 6
    • 7
    • 8
    • 9
    • 10
    • 11
    • 12
    • 13
    • 14

     [3.2-13.99/0.01mm Unit(s)]

    Clear

  • V (Hole diameter)(mm)

     [0.8-12.2/0.01mm Unit(s)]

    Clear

  • Boring method

    • Wire cutting & polishing

    Clear

  • Shaft diameter designation method

    • Shaft diameter 0.01mm increments
    • Shaft diameter selection

    Clear

  • L (L dimension)(mm)

     [40-250/0.01mm Unit(s)]

    Clear

  • S (V hole diameter length)(mm)

     [1-50/0.5mm Unit(s)]

    Clear

  • Type

    • ESVK-H
    • ESVK-M
    • ESVKB-H
    • ESVKB-M
    • ESVKJ-H
    • ESVKJB-H

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Optional Attributes

Tech Support

Technical Support
Tel：+49 69 668173-0 / FAX：+49 69 668173-360
Technical Inquiry

Betalningsmetod

Faktura

Förskottsbetalning

PayPal

Behovsstyrd tillverkning

Ändra vy

Certifikat

  • ISO-9001
  • ISO-14001
  • AEO-certifiering
  • RoHS
  • REACH

MISUMI världen över

Sociala medier

Juridiskt meddelande

Copyright © MISUMI Corporation All Rights Reserved.