Linear Bushings with Pillow Blocks - Double Bushing with Dowel Holes

Click on this image to zoom in.

Promotional pricing
Volume Discount

MISUMI

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing
3D Preview 3D preview is available after complete configuration
Part Numbers
More Information

Single Type

Double Type

Long

Type			Linear Bushing Used	Housing		Operating Ambient Temperature
Single Type	Double Type	Long		[M] Material	[S] Surface Treatment	Operating Ambient Temperature
LHBBN	LHBBWN	LHBBLN	LMU	Aluminum Alloy	Clear Anodize	－20 to 80°C

Specification Table

Part Number
LHBBN10 LHBBWN20 LHBBWN20L LHBBWN20G LHBBWN20H	(L Type Greased) (G Type Greased) (H Type Greased)

[ ! ] Alternative grease types available.

dr	Tolerance			L			L₁			h	H	(H₁)	(H₂)	W	W₁	W₂	M	d	ℓ	(A)	(B)	N	J	C
dr	Single	Double	Long	Single	Double	Long	Single	Double	Long	h	H	(H₁)	(H₂)	W	W₁	W₂	M	d	ℓ	(A)	(B)	N	J	C
10	0	0	—	35	68	—	21	46	—	13	26	21	8	40	28	6	M5	4.3	12	15.5	0.4	7.5	—	5
12	－ 0.009	－ 0.010		36	70	—	26	50	—	15	28	24		42	30.5	5.75				17.5	0.4	7	—	4
13				39	75	—	26	50	—	15	30	24.5		44	33	5.5				19	0.85	7	—	5.5
16			0 - 0.015	44	85	118	34	60	88	19	38.5	32.5	9	50	36	7				19.8	0.85	6.5	7	6
20	0	0	0	50	96	134	40	70	100	21	41	35	11	54	40	7	M6	5.2		21	0.5	7.5	8	6
25	－ 0.010	－ 0.012	－ 0.018	67	130	185	50	100	138	26	51.5	42	12	76	54	11	M8	7	18	36	1	4.5	9	9.5
30				72	140	200	58	110	150	30	59.5	49	15	78	58	10				39.9	0.75	5.5	9	10.5
35	0	0	0	80	155	220	60	120	170	34	68	54	18	90	70	10				53	1.5	6	10	14
40	－ 0.012	－ 0.015	－ 0.021	90	175	250	60	140	190	40	78	62	20	102	80	11	M10	8.7	25	61		5.5	12	16
50				110	215	310	80	160	230	52	102	80	25	122	100	11	M10	8.7	25	81		5.5	12	22

[!] Inner surfaces of dowel holes are not anodized. [!] Anti-rust oil is applied at the time of delivery.
[!] The datum surface is located on the other side of Part Number label.
[ ! ] Position of dowel holes for Long Type is ±0.02 from the center of dr.

dr	Dowel Hole Dimensions				Basic Load Rating						Allowable Static Moment			Mass (g)
	P	ℓ₂	G	E	C (Dynamic) N			Co (Static) N			(N⋅m)			Mass (g)
	P	ℓ₂	G	E	Single	Double	Long	Single	Double	Long	Single	Double	Long	Single	Double	Long
10	4	5	5	—	372	588	—	549	1100	—	—	7.24	—	92	180	—
12				—	412	657	—	598	1200	—	—	10.9	—	102	205	—
13				—	510	813	—	784	1570	—	—	11.6	—	120	240	—
16				88	775	1230	1230	1180	2350	2350	—	19.7	73.5	220	400	527
20	5	(5)	6	100	882	1400	1400	1370	2740	2740	—	26.8	98.0	255	570	682
25		6		138	980	1560	1560	1570	3140	3140	—	43.4	157	600	1200	1586
30		6		150	1570	2490	2490	2740	5490	5490	—	82.8	297	735	1480	1960
35				170	1670	2650	2650	3140	6270	6270	—	110	373	1100	2200	2974
40	6	7	7	190	2160	3430	3430	4020	8040	8040	—	147	553	1590	3200	4285
50	6	7	7	230	3820	6080	6080	7940	15900	15900	—	397	—	3340	6700	8620

[ ! ] ℓ₂ of LHBBLN20 is 5.

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
LHBBLN16
LHBBLN16A
LHBBLN16G
LHBBLN16H
LHBBLN16L
LHBBLN16Y
LHBBLN20
LHBBLN20A
LHBBLN20G
LHBBLN20H
LHBBLN20L
LHBBLN20Y
LHBBLN25
LHBBLN25A
LHBBLN25G
LHBBLN25H
LHBBLN25L
LHBBLN25Y
LHBBLN30
LHBBLN30A
LHBBLN30G
LHBBLN30H
LHBBLN30L
LHBBLN30Y
LHBBLN35
LHBBLN35A
LHBBLN35G
LHBBLN35H
LHBBLN35L
LHBBLN35Y
LHBBLN40
LHBBLN40A
LHBBLN40G
LHBBLN40H
LHBBLN40L
LHBBLN40Y
LHBBLN50
LHBBLN50A
LHBBLN50G
LHBBLN50H
LHBBLN50L
LHBBLN50Y
LHBBN10
LHBBN10A
LHBBN10G
LHBBN10H
LHBBN10L
LHBBN10Y
LHBBN12
LHBBN12A
LHBBN12G
LHBBN12H
LHBBN12L
LHBBN12Y
LHBBN13
LHBBN13A
LHBBN13G
LHBBN13H
LHBBN13L
LHBBN13Y

Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	RoHS	[dr] Inner Diameter (mm)	[L] Length (Total) (mm)	Grease Coating	[D] Outer Diameter (mm)	Basic Load Rating Dynamic Rating (Detail) (N)	Basic Load Rating Static Rating (N)	Tolerance of Inscribed Circle (Minus Side) (mm)	Basic Rated Load, Dynamic Rating
45.43 €	1	Available	Same day Stock	10	16	118	Not Provided	28	1230	2350	-0.015	1230
72.93 €	1	Available	9 Days	-	16	118	[Grease coating] A Type: Alvania S2 (For general-purpose industrial use)	28	-	-	-	1230
65.93 €	1	Available	9 Days	10	16	118	[Grease coating] G Type: LG2 (Low dust generation/manufactured by NSK)	28	1230	2350	-0.015	1230
65.93 €	1	Available	9 Days	10	16	118	[Grease coating] H Type: FGL-1 (Special hygienic requirements)	28	1230	2350	-0.015	1230
65.93 €	1	Available	9 Days	10	16	118	[Grease coating] L Type: ET-100K (Heat resistance)	28	1230	2350	-0.015	1230
73.84 €	1	Available	9 Days	-	16	118	[Grease coating] Y Type: AFF (Low dust generation, manufactured by THK)	28	-	-	-	1230
53.52 €	1	Available	Same day Stock	10	20	134	Not Provided	32	1400	2740	-0.018	1400
86.37 €	1	Available	9 Days	-	20	134	[Grease coating] A Type: Alvania S2 (For general-purpose industrial use)	32	-	-	-	1400
74.02 €	1	Available	9 Days	10	20	134	[Grease coating] G Type: LG2 (Low dust generation/manufactured by NSK)	32	1400	2740	-0.018	1400
74.02 €	1	Available	9 Days	10	20	134	[Grease coating] H Type: FGL-1 (Special hygienic requirements)	32	1400	2740	-0.018	1400
74.02 €	1	Available	9 Days	10	20	134	[Grease coating] L Type: ET-100K (Heat resistance)	32	1400	2740	-0.018	1400
87.44 €	1	Available	9 Days	-	20	134	[Grease coating] Y Type: AFF (Low dust generation, manufactured by THK)	32	-	-	-	1400
66.62 €	1	Available	5 Days	10	25	185	Not Provided	40	1560	3140	-0.018	1560
117.02 €	1	Available	9 Days	-	25	185	[Grease coating] A Type: Alvania S2 (For general-purpose industrial use)	40	-	-	-	1560
87.11 €	1	Available	9 Days	10	25	185	[Grease coating] G Type: LG2 (Low dust generation/manufactured by NSK)	40	1560	3140	-0.018	1560
87.11 €	1	Available	9 Days	10	25	185	[Grease coating] H Type: FGL-1 (Special hygienic requirements)	40	1560	3140	-0.018	1560
87.11 €	1	Available	9 Days	10	25	185	[Grease coating] L Type: ET-100K (Heat resistance)	40	1560	3140	-0.018	1560
117.87 €	1	Available	9 Days	-	25	185	[Grease coating] Y Type: AFF (Low dust generation, manufactured by THK)	40	-	-	-	1560
83.01 €	1	Available	Same day Stock	10	30	200	Not Provided	45	2490	5490	-0.018	2490
148.69 €	1	Available	9 Days	-	30	200	[Grease coating] A Type: Alvania S2 (For general-purpose industrial use)	45	-	-	-	2490
103.50 €	1	Available	9 Days	10	30	200	[Grease coating] G Type: LG2 (Low dust generation/manufactured by NSK)	45	2490	5490	-0.018	2490
103.50 €	1	Available	9 Days	10	30	200	[Grease coating] H Type: FGL-1 (Special hygienic requirements)	45	2490	5490	-0.018	2490
103.50 €	1	Available	9 Days	10	30	200	[Grease coating] L Type: ET-100K (Heat resistance)	45	2490	5490	-0.018	2490
149.96 €	1	Available	9 Days	-	30	200	[Grease coating] Y Type: AFF (Low dust generation, manufactured by THK)	45	-	-	-	2490
139.83 €	1	Available	5 Days	10	35	220	Not Provided	52	2650	6270	-0.021	2650
123.42 €	1	Available	9 Days	-	35	220	[Grease coating] A Type: Alvania S2 (For general-purpose industrial use)	52	-	-	-	2650
164.89 €	1	Available	9 Days	10	35	220	[Grease coating] G Type: LG2 (Low dust generation/manufactured by NSK)	52	2650	6270	-0.021	2650
164.89 €	1	Available	9 Days	10	35	220	[Grease coating] H Type: FGL-1 (Special hygienic requirements)	52	2650	6270	-0.021	2650
164.89 €	1	Available	9 Days	10	35	220	[Grease coating] L Type: ET-100K (Heat resistance)	52	2650	6270	-0.021	2650
124.39 €	1	Available	9 Days	-	35	220	[Grease coating] Y Type: AFF (Low dust generation, manufactured by THK)	52	-	-	-	2650
186.41 €	1	Available	5 Days	10	40	250	Not Provided	60	3430	8040	-0.021	3430
172.11 €	1	Available	9 Days	-	40	250	[Grease coating] A Type: Alvania S2 (For general-purpose industrial use)	60	-	-	-	3430
211.47 €	1	Available	9 Days	10	40	250	[Grease coating] G Type: LG2 (Low dust generation/manufactured by NSK)	60	3430	8040	-0.021	3430
211.47 €	1	Available	9 Days	10	40	250	[Grease coating] H Type: FGL-1 (Special hygienic requirements)	60	3430	8040	-0.021	3430
211.47 €	1	Available	9 Days	10	40	250	[Grease coating] L Type: ET-100K (Heat resistance)	60	3430	8040	-0.021	3430
173.93 €	1	Available	9 Days	-	40	250	[Grease coating] Y Type: AFF (Low dust generation, manufactured by THK)	60	-	-	-	3430
257.02 €	1	Available	5 Days	10	50	310	Not Provided	80	6080	15900	-0.021	6080
247.42 €	1	Available	9 Days	-	50	310	[Grease coating] A Type: Alvania S2 (For general-purpose industrial use)	80	-	-	-	6080
282.06 €	1	Available	9 Days	10	50	310	[Grease coating] G Type: LG2 (Low dust generation/manufactured by NSK)	80	6080	15900	-0.021	6080
282.06 €	1	Available	9 Days	10	50	310	[Grease coating] H Type: FGL-1 (Special hygienic requirements)	80	6080	15900	-0.021	6080
282.06 €	1	Available	9 Days	10	50	310	[Grease coating] L Type: ET-100K (Heat resistance)	80	6080	15900	-0.021	6080
250.16 €	1	Available	9 Days	-	50	310	[Grease coating] Y Type: AFF (Low dust generation, manufactured by THK)	80	-	-	-	6080
19.83 € 13.68 €	1	Available	Same day Stock	10	10	35	Not Provided	19	372	549	-0.009	372
34.25 €	1	Available	9 Days	-	10	35	[Grease coating] A Type: Alvania S2 (For general-purpose industrial use)	19	-	-	-	372
33.49 €	1	Available	9 Days	10	10	35	[Grease coating] G Type: LG2 (Low dust generation/manufactured by NSK)	19	372	549	-0.009	372
33.49 €	1	Available	9 Days	10	10	35	[Grease coating] H Type: FGL-1 (Special hygienic requirements)	19	372	549	-0.009	372
33.49 €	1	Available	9 Days	10	10	35	[Grease coating] L Type: ET-100K (Heat resistance)	19	372	549	-0.009	372
34.55 €	1	Available	9 Days	-	10	35	[Grease coating] Y Type: AFF (Low dust generation, manufactured by THK)	19	-	-	-	372
19.92 €	1	Available	5 Days	10	12	36	Not Provided	21	412	598	-0.009	412
34.64 €	1	Available	9 Days	-	12	36	[Grease coating] A Type: Alvania S2 (For general-purpose industrial use)	21	-	-	-	412
40.43 €	1	Available	9 Days	10	12	36	[Grease coating] G Type: LG2 (Low dust generation/manufactured by NSK)	21	412	598	-0.009	412
40.43 €	1	Available	9 Days	10	12	36	[Grease coating] H Type: FGL-1 (Special hygienic requirements)	21	412	598	-0.009	412
40.43 €	1	Available	9 Days	10	12	36	[Grease coating] L Type: ET-100K (Heat resistance)	21	412	598	-0.009	412
35.01 €	1	Available	9 Days	-	12	36	[Grease coating] Y Type: AFF (Low dust generation, manufactured by THK)	21	-	-	-	412
20.85 €	1	Available	5 Days	10	13	39	Not Provided	23	510	784	-0.009	510
36.10 €	1	Available	9 Days	-	13	39	[Grease coating] A Type: Alvania S2 (For general-purpose industrial use)	23	-	-	-	510
41.33 €	1	Available	9 Days	10	13	39	[Grease coating] G Type: LG2 (Low dust generation/manufactured by NSK)	23	510	784	-0.009	510
41.33 €	1	Available	9 Days	10	13	39	[Grease coating] H Type: FGL-1 (Special hygienic requirements)	23	510	784	-0.009	510
41.33 €	1	Available	9 Days	10	13	39	[Grease coating] L Type: ET-100K (Heat resistance)	23	510	784	-0.009	510
36.54 €	1	Available	9 Days	-	13	39	[Grease coating] Y Type: AFF (Low dust generation, manufactured by THK)	23	-	-	-	510

Specifications/Overview

Installation Example

Conventional Type		Dowel Hole Type

Locating with plate end datum		Locating with dowel holes

■Features of Dowel Hole Type
·By the dowel holes provided on the mounting interface surface, locating workpieces using the side datum can be eliminated. (See Installation Example above)
·Machining steps can be reduced for the top plate to be mounted on the block.

Basic information

Type2	Housing Wide Block	RoHS Information	RoHS Requirements Fulfilled	Features, Areas of Application	Not Applicable
Material of Outer Cylinder	EN 1.3505 Equiv.	Outer Cylinder Surface Treatment	Clear Anodize	Linear Motion / Rotational Motion	Linear Bushing (Linear Motion Only)
Ball Material	EN 1.3505 Equiv.	Retainer Material	Plastic (Duracon M90 Equivalent)	Seals	With Seal
Outer Cylinder Material	EN 1.3505 Equiv.

Configure

162Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Stock

- Show only stock items
Clear

Basic Attributes

[dr] Inner Diameter(mm)
10

12

13

16

20

25

30

35

40

50
Clear
[L] Length (Total)(mm)
35

36

39

44

50

67

68

70

72

75

80

85

90

96

110

118

130

134

140

155

175

185

200

215

220

250

310
Clear
Grease Coating
- Not Provided
- Grease coating
  - L Type: ET-100K (Heat resistance)
  - H Type: FGL-1 (Special hygienic requirements)
  - A Type: Alvania S2 (For general-purpose industrial use)
  - G Type: LG2 (Low dust generation/manufactured by NSK)
  - Y Type: AFF (Low dust generation, manufactured by THK)
Clear
[D] Outer Diameter(mm)
19

21

23

28

32

40

45

52

60

80
Clear
Basic Rated Load, Dynamic Rating
372

412

510

588

657

775

813

882

980

1230

1400

1560

1570

1670

2160

2490

2650

3430

3820

6080
Clear
Type
- LHBBLN
- LHBBN
- LHBBWN
Clear
Filter by CAD data type
- 2D
- 3D
Clear