• Märken
  • Företag
  • Kontakt
SV
Type Code Seach | *NOT READY*
#CODE
Förslag på nyckelord
Förslag på artikelnummer
Discontinued Products

Plates / NBR, CR, EPDM, SI, FPM / C25, C35, A45, A65, A70 / round, square cut-out, through hole / adhesive layer

Plates / NBR, CR, EPDM, SI, FPM / C25, C35, A45, A65, A70 / round, square cut-out, through hole / adhesive layer
View the FAQ (5)

MISUMI

MISUMI

  • Order quantities extended (D-JIT)

Data sheet

Unit еxample related to this product
Air tightness check fixture
Search for оther еxamples

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Back to the Category Panels (polyurethane rubber, rubber, foam, felt)

Technical Drawing - Panels (polyurethane rubber, rubber, foam, felt)

Rubber/Sponge Packings:Related Image
Open the technical drawing in the new window

Available dimensions and tolerances can be found under the tab More information.
 

Basic Properties (e.g., material, hardness, coating, tolerance) - Panels (polyurethane rubber, rubber, foam, felt)

TypeMaterialHardnessColor
FRNNitrile Rubber (NBR)Shore A70Black
FRCChloroprene Rubber (CR)Shore A65Black
FRCANAmber Color RubberShore A45Amber Color
FRSMSilicon RubberShore A70Light Gray
FRAMSilicon RubberShore A50Milky White
FRFFFluororubber (FPM)Shore A80Black
FSNCChloroprene Rubber SpongeAsker C25Black
FSNFFluororubber SpongeAsker C35Black
FSNASilicon Rubber SpongeAsker C35Orange
FREPEthylene Rubber (EPDM)Shore A65Black
Sponge Hardness: ASKER-C

Further specifications can be found under the tab More information.
 

Composition of a Product Code - Panels (polyurethane rubber, rubber, foam, felt)

Part Number-A-B-W-V-F-G-Q-N
     
Type Shape T
FRN 4H 3-A300-B200-W200-V100-F250-G150  -N11
 

Alterations - Panels (polyurethane rubber, rubber, foam, felt)


Rubber/Sponge Packings:Related Image
For option ZC the following machining condition must be fulfilled : 5 < = B-G-Z and 5 <= A-F-Z

General Information - Panels (polyurethane rubber, rubber, foam, felt)

 

Selection details of panels (polyurethane rubber, rubber, foam, felt)

- Material: polyurethane rubber (PU/PUR), heat-resistant polyurethane rubber, low-impact polyurethane rubber, abrasion-resistant polyurethane rubber, antistatic polyurethane, nitrile (NBR), chloroprene rubber (CR), polyethylene (EPDM), silicone (SI), fluorine (FPM), butyl rubber (IIR), natural rubber (NR), hard rubber, special synthetic rubber, polyurethane foam, head-insulating foam, polyethylene foam, low-rebound foam

- Thickness (mm): 0.5 to 50

- Width (mm): 3 to 500

- Length (mm): 10 to 2000

 

Description/Basics

Foam plates and rubber plates are provided for damping or for sound proofing. MISUMI offers these in various Shore hardening for a wide variety of tasks. Due to the variety of materials, different resistances to environmental influences are possible depending on the application. The foam plates reduce sound in machines and can reduce the sound emissions of a system. For more information on foam characteristics, follow this link.
Rubber plates or foam plates are also suitable in conveyor systems to absorb components to be transported at a dampened level or to protect them from damage as a lateral guide when the components bump into each other. Hard rubber panels or low-impact rubber or foam panels reduce the impact energy of the components. These minimize and lower the vibrations in an application.
In addition, MISUMI offers highly abrasion-resistant polyurethane (Vulkollan), which has an abrasion resistance that is six times higher than with conventional polyurethane.
Ceramic polyurethane plates contain ceramic particles. After machining, these can have a smooth surface despite low Shore hardness.
The polyurethane rubber plates are also available antistatically. The specific resistance of antistatic polyurethane plates prevents static charging. This prevents any damage to electronic components.
For applications with higher temperatures, MISUMI offers heat-resistant polyurethane rubber, which can withstand a temperature range of up to approx. ~120°C (see the product specifications for exact information).
MISUMI also offers low-friction and anti-friction rubber plates. Low-friction rubber plates are often used in the gentle component guide for belt conveyors and roller conveyors.
Felt plates have the property of absorbing or dispensing oil and other liquids via the capillary effect. This property can be used to remove, for example, excess oil on a belt conveyor.

In addition, MISUMI offers rubber plates and foam plates that are self-adhesive for simplified assembly. Furthermore, you will find double-adhesive tape for attaching rubber plates and foam plates.

Additional properties on foam panels and rubber plates can be found in the Properties PDF.

MISUMI also offers these products in a round shape as discs and sleeves made of rubber, natural rubber, foam and felt.

 

Application Examples - Panels (polyurethane rubber, rubber, foam, felt)

Application example
(1) Low-friction rubber plate (2) belt conveyor

Application example
(1) Vibration damping plate

 

Industrial Applications

3D printer industry
Automotive industry
Pharmaceutical industry
Packaging industry

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
  2. 2
  3. 3
  4. Next >>
Part Number
FRN1A1-A[25-500/1]-V[3-496/0.5]
FRN1A2-A[25-500/1]-V[3-496/0.5]
FRN1A3-A[25-500/1]-V[3-496/0.5]
FRN1A5-A[25-500/1]-V[3-496/0.5]
FRN1A10-A[25-500/1]-V[3-496/0.5]
FRN1A15-A[25-500/1]-V[3-496/0.5]
FRN1A20-A[25-500/1]-V[3-496/0.5]
FRN1A30-A[30-500/1]-V[3-496/0.5]
FRN4A1-A[25-500/1]-V0-Q[11-492/0.5]-N[3-30/0.5]
FRN4A1-A[25-500/1]-V[3-484/0.5]-Q[11-492/0.5]-N[3-30/0.5]
FRN4A2-A[25-500/1]-V0-Q[11-492/0.5]-N[3-30/0.5]
FRN4A2-A[25-500/1]-V[3-484/0.5]-Q[11-492/0.5]-N[3-30/0.5]
FRN4A3-A[25-500/1]-V0-Q[11-492/0.5]-N[3-30/0.5]
FRN4A3-A[25-500/1]-V[3-484/0.5]-Q[11-492/0.5]-N[3-30/0.5]
FRN4A5-A[25-500/1]-V0-Q[11-492/0.5]-N[3-30/0.5]
FRN4A5-A[25-500/1]-V[3-484/0.5]-Q[11-492/0.5]-N[3-30/0.5]
FRN4A10-A[25-500/1]-V0-Q[11-492/0.5]-N[3-30/0.5]
FRN4A10-A[25-500/1]-V[3-484/0.5]-Q[11-492/0.5]-N[3-30/0.5]
FRN4A15-A[25-500/1]-V0-Q[11-492/0.5]-N[3-30/0.5]
FRN4A15-A[25-500/1]-V[3-484/0.5]-Q[11-492/0.5]-N[3-30/0.5]
FRN4A20-A[25-500/1]-V0-Q[11-492/0.5]-N[3-30/0.5]
FRN4A20-A[25-500/1]-V[3-484/0.5]-Q[11-492/0.5]-N[3-30/0.5]
FRN4A30-A[30-500/1]-V0-Q[11-492/0.5]-N[3-30/0.5]
FRN4A30-A[30-500/1]-V[3-484/0.5]-Q[11-492/0.5]-N[3-30/0.5]
FRN4H1-A[25-500/1]-B[25-500/1]-W0-V0-F[10-492/0.5]-G[10-492/0.5]-N[3-30/0.5]
FRN4H1-A[25-500/1]-B[25-500/1]-W0-V[10-495/0.5]-F[10-492/0.5]-G[10-492/0.5]-N[3-30/0.5]
FRN4H1-A[25-500/1]-B[25-500/1]-W[10-495/0.5]-V0-F[10-492/0.5]-G[10-492/0.5]-N[3-30/0.5]
FRN4H1-A[25-500/1]-B[25-500/1]-W[10-495/0.5]-V[10-495/0.5]-F[10-492/0.5]-G[10-492/0.5]-N[3-30/0.5]
FRN4H2-A[25-500/1]-B[25-500/1]-W0-V0-F[18-492/0.5]-G[18-492/0.5]-N[3-30/0.5]
FRN4H2-A[25-500/1]-B[25-500/1]-W0-V[10-495/0.5]-F[18-492/0.5]-G[18-492/0.5]-N[3-30/0.5]
FRN4H2-A[25-500/1]-B[25-500/1]-W[10-495/0.5]-V0-F[18-492/0.5]-G[18-492/0.5]-N[3-30/0.5]
FRN4H2-A[25-500/1]-B[25-500/1]-W[10-495/0.5]-V[10-495/0.5]-F[18-492/0.5]-G[18-492/0.5]-N[3-30/0.5]
FRN4H3-A[25-500/1]-B[25-500/1]-W0-V0-F[18-492/0.5]-G[18-492/0.5]-N[3-30/0.5]
FRN4H3-A[25-500/1]-B[25-500/1]-W0-V[10-495/0.5]-F[18-492/0.5]-G[18-492/0.5]-N[3-30/0.5]
FRN4H3-A[25-500/1]-B[25-500/1]-W[10-495/0.5]-V0-F[18-492/0.5]-G[18-492/0.5]-N[3-30/0.5]
FRN4H3-A[25-500/1]-B[25-500/1]-W[10-495/0.5]-V[10-495/0.5]-F[18-492/0.5]-G[18-492/0.5]-N[3-30/0.5]
FRN4H5-A[25-500/1]-B[25-500/1]-W0-V0-F[18-492/0.5]-G[18-492/0.5]-N[3-30/0.5]
FRN4H5-A[25-500/1]-B[25-500/1]-W0-V[10-495/0.5]-F[18-492/0.5]-G[18-492/0.5]-N[3-30/0.5]
FRN4H5-A[25-500/1]-B[25-500/1]-W[10-495/0.5]-V0-F[18-492/0.5]-G[18-492/0.5]-N[3-30/0.5]
FRN4H5-A[25-500/1]-B[25-500/1]-W[10-495/0.5]-V[10-495/0.5]-F[18-492/0.5]-G[18-492/0.5]-N[3-30/0.5]
FRN4H10-A[25-500/1]-B[25-500/1]-W0-V0-F[18-492/0.5]-G[18-492/0.5]-N[3-30/0.5]
FRN4H10-A[25-500/1]-B[25-500/1]-W0-V[10-495/0.5]-F[18-492/0.5]-G[18-492/0.5]-N[3-30/0.5]
FRN4H10-A[25-500/1]-B[25-500/1]-W[10-495/0.5]-V0-F[18-492/0.5]-G[18-492/0.5]-N[3-30/0.5]
FRN4H10-A[25-500/1]-B[25-500/1]-W[10-495/0.5]-V[10-495/0.5]-F[18-492/0.5]-G[18-492/0.5]-N[3-30/0.5]
FRN4H15-A[25-500/1]-B[25-500/1]-W0-V0-F[18-492/0.5]-G[18-492/0.5]-N[3-30/0.5]
FRN4H15-A[25-500/1]-B[25-500/1]-W0-V[10-495/0.5]-F[18-492/0.5]-G[18-492/0.5]-N[3-30/0.5]
FRN4H15-A[25-500/1]-B[25-500/1]-W[10-495/0.5]-V0-F[18-492/0.5]-G[18-492/0.5]-N[3-30/0.5]
FRN4H15-A[25-500/1]-B[25-500/1]-W[10-495/0.5]-V[10-495/0.5]-F[18-492/0.5]-G[18-492/0.5]-N[3-30/0.5]
FRN4H20-A[25-500/1]-B[25-500/1]-W0-V0-F[18-492/0.5]-G[18-492/0.5]-N[3-30/0.5]
FRN4H20-A[25-500/1]-B[25-500/1]-W0-V[10-495/0.5]-F[18-492/0.5]-G[18-492/0.5]-N[3-30/0.5]
FRN4H20-A[25-500/1]-B[25-500/1]-W[10-495/0.5]-V0-F[18-492/0.5]-G[18-492/0.5]-N[3-30/0.5]
FRN4H20-A[25-500/1]-B[25-500/1]-W[10-495/0.5]-V[10-495/0.5]-F[18-492/0.5]-G[18-492/0.5]-N[3-30/0.5]
FRN4H30-A[30-500/1]-B[30-500/1]-W0-V0-F[18-492/0.5]-G[18-492/0.5]-N[3-30/0.5]
FRN4H30-A[30-500/1]-B[30-500/1]-W0-V[10-495/0.5]-F[18-492/0.5]-G[18-492/0.5]-N[3-30/0.5]
FRN4H30-A[30-500/1]-B[30-500/1]-W[10-495/0.5]-V0-F[18-492/0.5]-G[18-492/0.5]-N[3-30/0.5]
FRN4H30-A[30-500/1]-B[30-500/1]-W[10-495/0.5]-V[10-495/0.5]-F[18-492/0.5]-G[18-492/0.5]-N[3-30/0.5]
FRN6H1-A[25-500/1]-B[25-500/1]-W0-V0-F[9-246/0.5]-G[18-492/0.5]-N[3-30/0.5]
FRN6H1-A[25-500/1]-B[25-500/1]-W0-V[10-495/0.5]-F[9-246/0.5]-G[18-492/0.5]-N[3-30/0.5]
FRN6H1-A[25-500/1]-B[25-500/1]-W[10-495/0.5]-V0-F[9-246/0.5]-G[18-492/0.5]-N[3-30/0.5]
FRN6H1-A[25-500/1]-B[25-500/1]-W[10-495/0.5]-V[10-495/0.5]-F[9-246/0.5]-G[18-492/0.5]-N[3-30/0.5]
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSMaterial Grade, Type Thickness T
(mm) 		Width A
(mm) 		Length B
(mm) 		Hardness (Shore, Asker, Penetration) Specifications F
(mm) 		G
(mm) 		N
(mm) 		Q
(mm) 		V
(mm) 		W
(mm)

-

1 7 Days 10Rubber[Nitrile (NBR)] Nitrile (NBR)125 ～ 500-Shore A701A (Round Shape, Round Center Hole)----3 ～ 496-

-

1 7 Days 10Rubber[Nitrile (NBR)] Nitrile (NBR)225 ～ 500-Shore A701A (Round Shape, Round Center Hole)----3 ～ 496-

-

1 7 Days 10Rubber[Nitrile (NBR)] Nitrile (NBR)325 ～ 500-Shore A701A (Round Shape, Round Center Hole)----3 ～ 496-

-

1 7 Days 10Rubber[Nitrile (NBR)] Nitrile (NBR)525 ～ 500-Shore A701A (Round Shape, Round Center Hole)----3 ～ 496-

-

1 7 Days 10Rubber[Nitrile (NBR)] Nitrile (NBR)1025 ～ 500-Shore A701A (Round Shape, Round Center Hole)----3 ～ 496-

-

1 7 Days 10Rubber[Nitrile (NBR)] Nitrile (NBR)1525 ～ 500-Shore A701A (Round Shape, Round Center Hole)----3 ～ 496-

-

1 7 Days 10Rubber[Nitrile (NBR)] Nitrile (NBR)2025 ～ 500-Shore A701A (Round Shape, Round Center Hole)----3 ～ 496-

-

1 7 Days 10Rubber[Nitrile (NBR)] Nitrile (NBR)3030 ～ 500-Shore A701A (Round Shape, Round Center Hole)----3 ～ 496-

-

1 7 Days 10Rubber[Nitrile (NBR)] Nitrile (NBR)125 ～ 500-Shore A704A (Round Shape, Round Center Hole + 4 Through Holes)--3 ～ 3011 ～ 4920-

-

1 7 Days 10Rubber[Nitrile (NBR)] Nitrile (NBR)125 ～ 500-Shore A704A (Round Shape, Round Center Hole + 4 Through Holes)--3 ～ 3011 ～ 4923 ～ 484-

-

1 7 Days 10Rubber[Nitrile (NBR)] Nitrile (NBR)225 ～ 500-Shore A704A (Round Shape, Round Center Hole + 4 Through Holes)--3 ～ 3011 ～ 4920-

-

1 7 Days 10Rubber[Nitrile (NBR)] Nitrile (NBR)225 ～ 500-Shore A704A (Round Shape, Round Center Hole + 4 Through Holes)--3 ～ 3011 ～ 4923 ～ 484-

-

1 7 Days 10Rubber[Nitrile (NBR)] Nitrile (NBR)325 ～ 500-Shore A704A (Round Shape, Round Center Hole + 4 Through Holes)--3 ～ 3011 ～ 4920-

-

1 7 Days 10Rubber[Nitrile (NBR)] Nitrile (NBR)325 ～ 500-Shore A704A (Round Shape, Round Center Hole + 4 Through Holes)--3 ～ 3011 ～ 4923 ～ 484-

-

1 7 Days 10Rubber[Nitrile (NBR)] Nitrile (NBR)525 ～ 500-Shore A704A (Round Shape, Round Center Hole + 4 Through Holes)--3 ～ 3011 ～ 4920-

-

1 7 Days 10Rubber[Nitrile (NBR)] Nitrile (NBR)525 ～ 500-Shore A704A (Round Shape, Round Center Hole + 4 Through Holes)--3 ～ 3011 ～ 4923 ～ 484-

-

1 7 Days 10Rubber[Nitrile (NBR)] Nitrile (NBR)1025 ～ 500-Shore A704A (Round Shape, Round Center Hole + 4 Through Holes)--3 ～ 3011 ～ 4920-

-

1 7 Days 10Rubber[Nitrile (NBR)] Nitrile (NBR)1025 ～ 500-Shore A704A (Round Shape, Round Center Hole + 4 Through Holes)--3 ～ 3011 ～ 4923 ～ 484-

-

1 7 Days 10Rubber[Nitrile (NBR)] Nitrile (NBR)1525 ～ 500-Shore A704A (Round Shape, Round Center Hole + 4 Through Holes)--3 ～ 3011 ～ 4920-

-

1 7 Days 10Rubber[Nitrile (NBR)] Nitrile (NBR)1525 ～ 500-Shore A704A (Round Shape, Round Center Hole + 4 Through Holes)--3 ～ 3011 ～ 4923 ～ 484-

-

1 7 Days 10Rubber[Nitrile (NBR)] Nitrile (NBR)2025 ～ 500-Shore A704A (Round Shape, Round Center Hole + 4 Through Holes)--3 ～ 3011 ～ 4920-

-

1 7 Days 10Rubber[Nitrile (NBR)] Nitrile (NBR)2025 ～ 500-Shore A704A (Round Shape, Round Center Hole + 4 Through Holes)--3 ～ 3011 ～ 4923 ～ 484-

-

1 7 Days 10Rubber[Nitrile (NBR)] Nitrile (NBR)3030 ～ 500-Shore A704A (Round Shape, Round Center Hole + 4 Through Holes)--3 ～ 3011 ～ 4920-

-

1 7 Days 10Rubber[Nitrile (NBR)] Nitrile (NBR)3030 ～ 500-Shore A704A (Round Shape, Round Center Hole + 4 Through Holes)--3 ～ 3011 ～ 4923 ～ 484-

-

1 7 Days 10Rubber[Nitrile (NBR)] Nitrile (NBR)125 ～ 50025 ～ 500Shore A704H (Square Shape, Square Center Hole + 4 Through Holes)10 ～ 49210 ～ 4923 ～ 30-00

-

1 7 Days 10Rubber[Nitrile (NBR)] Nitrile (NBR)125 ～ 50025 ～ 500Shore A704H (Square Shape, Square Center Hole + 4 Through Holes)10 ～ 49210 ～ 4923 ～ 30-10 ～ 4950

-

1 7 Days 10Rubber[Nitrile (NBR)] Nitrile (NBR)125 ～ 50025 ～ 500Shore A704H (Square Shape, Square Center Hole + 4 Through Holes)10 ～ 49210 ～ 4923 ～ 30-010 ～ 495

-

1 7 Days 10Rubber[Nitrile (NBR)] Nitrile (NBR)125 ～ 50025 ～ 500Shore A704H (Square Shape, Square Center Hole + 4 Through Holes)10 ～ 49210 ～ 4923 ～ 30-10 ～ 49510 ～ 495

-

1 7 Days 10Rubber[Nitrile (NBR)] Nitrile (NBR)225 ～ 50025 ～ 500Shore A704H (Square Shape, Square Center Hole + 4 Through Holes)18 ～ 49218 ～ 4923 ～ 30-00

-

1 7 Days 10Rubber[Nitrile (NBR)] Nitrile (NBR)225 ～ 50025 ～ 500Shore A704H (Square Shape, Square Center Hole + 4 Through Holes)18 ～ 49218 ～ 4923 ～ 30-10 ～ 4950

-

1 7 Days 10Rubber[Nitrile (NBR)] Nitrile (NBR)225 ～ 50025 ～ 500Shore A704H (Square Shape, Square Center Hole + 4 Through Holes)18 ～ 49218 ～ 4923 ～ 30-010 ～ 495

-

1 7 Days 10Rubber[Nitrile (NBR)] Nitrile (NBR)225 ～ 50025 ～ 500Shore A704H (Square Shape, Square Center Hole + 4 Through Holes)18 ～ 49218 ～ 4923 ～ 30-10 ～ 49510 ～ 495

-

1 7 Days 10Rubber[Nitrile (NBR)] Nitrile (NBR)325 ～ 50025 ～ 500Shore A704H (Square Shape, Square Center Hole + 4 Through Holes)18 ～ 49218 ～ 4923 ～ 30-00

-

1 7 Days 10Rubber[Nitrile (NBR)] Nitrile (NBR)325 ～ 50025 ～ 500Shore A704H (Square Shape, Square Center Hole + 4 Through Holes)18 ～ 49218 ～ 4923 ～ 30-10 ～ 4950

-

1 7 Days 10Rubber[Nitrile (NBR)] Nitrile (NBR)325 ～ 50025 ～ 500Shore A704H (Square Shape, Square Center Hole + 4 Through Holes)18 ～ 49218 ～ 4923 ～ 30-010 ～ 495

-

1 7 Days 10Rubber[Nitrile (NBR)] Nitrile (NBR)325 ～ 50025 ～ 500Shore A704H (Square Shape, Square Center Hole + 4 Through Holes)18 ～ 49218 ～ 4923 ～ 30-10 ～ 49510 ～ 495

-

1 7 Days 10Rubber[Nitrile (NBR)] Nitrile (NBR)525 ～ 50025 ～ 500Shore A704H (Square Shape, Square Center Hole + 4 Through Holes)18 ～ 49218 ～ 4923 ～ 30-00

-

1 7 Days 10Rubber[Nitrile (NBR)] Nitrile (NBR)525 ～ 50025 ～ 500Shore A704H (Square Shape, Square Center Hole + 4 Through Holes)18 ～ 49218 ～ 4923 ～ 30-10 ～ 4950

-

1 7 Days 10Rubber[Nitrile (NBR)] Nitrile (NBR)525 ～ 50025 ～ 500Shore A704H (Square Shape, Square Center Hole + 4 Through Holes)18 ～ 49218 ～ 4923 ～ 30-010 ～ 495

-

1 7 Days 10Rubber[Nitrile (NBR)] Nitrile (NBR)525 ～ 50025 ～ 500Shore A704H (Square Shape, Square Center Hole + 4 Through Holes)18 ～ 49218 ～ 4923 ～ 30-10 ～ 49510 ～ 495

-

1 7 Days 10Rubber[Nitrile (NBR)] Nitrile (NBR)1025 ～ 50025 ～ 500Shore A704H (Square Shape, Square Center Hole + 4 Through Holes)18 ～ 49218 ～ 4923 ～ 30-00

-

1 7 Days 10Rubber[Nitrile (NBR)] Nitrile (NBR)1025 ～ 50025 ～ 500Shore A704H (Square Shape, Square Center Hole + 4 Through Holes)18 ～ 49218 ～ 4923 ～ 30-10 ～ 4950

-

1 7 Days 10Rubber[Nitrile (NBR)] Nitrile (NBR)1025 ～ 50025 ～ 500Shore A704H (Square Shape, Square Center Hole + 4 Through Holes)18 ～ 49218 ～ 4923 ～ 30-010 ～ 495

-

1 7 Days 10Rubber[Nitrile (NBR)] Nitrile (NBR)1025 ～ 50025 ～ 500Shore A704H (Square Shape, Square Center Hole + 4 Through Holes)18 ～ 49218 ～ 4923 ～ 30-10 ～ 49510 ～ 495

-

1 7 Days 10Rubber[Nitrile (NBR)] Nitrile (NBR)1525 ～ 50025 ～ 500Shore A704H (Square Shape, Square Center Hole + 4 Through Holes)18 ～ 49218 ～ 4923 ～ 30-00

-

1 7 Days 10Rubber[Nitrile (NBR)] Nitrile (NBR)1525 ～ 50025 ～ 500Shore A704H (Square Shape, Square Center Hole + 4 Through Holes)18 ～ 49218 ～ 4923 ～ 30-10 ～ 4950

-

1 7 Days 10Rubber[Nitrile (NBR)] Nitrile (NBR)1525 ～ 50025 ～ 500Shore A704H (Square Shape, Square Center Hole + 4 Through Holes)18 ～ 49218 ～ 4923 ～ 30-010 ～ 495

-

1 7 Days 10Rubber[Nitrile (NBR)] Nitrile (NBR)1525 ～ 50025 ～ 500Shore A704H (Square Shape, Square Center Hole + 4 Through Holes)18 ～ 49218 ～ 4923 ～ 30-10 ～ 49510 ～ 495

-

1 7 Days 10Rubber[Nitrile (NBR)] Nitrile (NBR)2025 ～ 50025 ～ 500Shore A704H (Square Shape, Square Center Hole + 4 Through Holes)18 ～ 49218 ～ 4923 ～ 30-00

-

1 7 Days 10Rubber[Nitrile (NBR)] Nitrile (NBR)2025 ～ 50025 ～ 500Shore A704H (Square Shape, Square Center Hole + 4 Through Holes)18 ～ 49218 ～ 4923 ～ 30-10 ～ 4950

-

1 7 Days 10Rubber[Nitrile (NBR)] Nitrile (NBR)2025 ～ 50025 ～ 500Shore A704H (Square Shape, Square Center Hole + 4 Through Holes)18 ～ 49218 ～ 4923 ～ 30-010 ～ 495

-

1 7 Days 10Rubber[Nitrile (NBR)] Nitrile (NBR)2025 ～ 50025 ～ 500Shore A704H (Square Shape, Square Center Hole + 4 Through Holes)18 ～ 49218 ～ 4923 ～ 30-10 ～ 49510 ～ 495

-

1 7 Days 10Rubber[Nitrile (NBR)] Nitrile (NBR)3030 ～ 50030 ～ 500Shore A704H (Square Shape, Square Center Hole + 4 Through Holes)18 ～ 49218 ～ 4923 ～ 30-00

-

1 7 Days 10Rubber[Nitrile (NBR)] Nitrile (NBR)3030 ～ 50030 ～ 500Shore A704H (Square Shape, Square Center Hole + 4 Through Holes)18 ～ 49218 ～ 4923 ～ 30-10 ～ 4950

-

1 7 Days 10Rubber[Nitrile (NBR)] Nitrile (NBR)3030 ～ 50030 ～ 500Shore A704H (Square Shape, Square Center Hole + 4 Through Holes)18 ～ 49218 ～ 4923 ～ 30-010 ～ 495

-

1 7 Days 10Rubber[Nitrile (NBR)] Nitrile (NBR)3030 ～ 50030 ～ 500Shore A704H (Square Shape, Square Center Hole + 4 Through Holes)18 ～ 49218 ～ 4923 ～ 30-10 ～ 49510 ～ 495

-

1 7 Days 10Rubber[Nitrile (NBR)] Nitrile (NBR)125 ～ 50025 ～ 500Shore A706H (Square Shape, Square Center Hole + 6 Through Holes)9 ～ 24618 ～ 4923 ～ 30-00

-

1 7 Days 10Rubber[Nitrile (NBR)] Nitrile (NBR)125 ～ 50025 ～ 500Shore A706H (Square Shape, Square Center Hole + 6 Through Holes)9 ～ 24618 ～ 4923 ～ 30-10 ～ 4950

-

1 7 Days 10Rubber[Nitrile (NBR)] Nitrile (NBR)125 ～ 50025 ～ 500Shore A706H (Square Shape, Square Center Hole + 6 Through Holes)9 ～ 24618 ～ 4923 ～ 30-010 ～ 495

-

1 7 Days 10Rubber[Nitrile (NBR)] Nitrile (NBR)125 ～ 50025 ～ 500Shore A706H (Square Shape, Square Center Hole + 6 Through Holes)9 ～ 24618 ～ 4923 ～ 30-10 ～ 49510 ～ 495

Loading...

  1. 1
  2. 2
  3. 3
  4. Next >>

Back to the Category Panels (polyurethane rubber, rubber, foam, felt)

Technical Drawing - Panels (polyurethane rubber, rubber, foam, felt)

Rubber/Sponge Packings:Related Image
Open the technical drawing in the new window

Specification Tables - Panels (polyurethane rubber, rubber, foam, felt)

Part Number1mm Increment (A≥B≥T)WVFGQ0.5mm Increment
TypeShape SelectionT SelectionABN
RubberSponge
FRN
FRC
FRFF
FRSM
FRAM
FRCAN
FSNC
FSNF
FSNA
FREP		(Nitrile Rubber)
(Chloroprene Rubber)
(Fluororubber)
(Silicon A70)
(Silicon A50)
(Amber Color Rubber)
(Chloroprene Rubber Sponge)
(Fluororubber Sponge)
(Silicon Rubber Sponge)
(Ethylene Rubber EPDM A65)		A
1A
4A
8A

H
4H
6H
8H		1

2

3

5

10

15

20

30		3


5


10		25~500
(When T=30,
A≥30)		25~500
(When T=30,
B≥30)		0.5mm Increment
<Refer to Machining Limits and Condition Formula>		3~30
For FRFF (Fluororubber) with T dimension 15 ~ 30, maximum value for A and B is 300.
 

Alterations - Panels (polyurethane rubber, rubber, foam, felt)

Rubber/Sponge Packings:Related Image
For option ZC the following machining condition must be fulfilled : 5 < = B-G-Z and 5 <= A-F-Z
 

Basic information

With or w/o Adhesive No Adhesive Hole Machining No Drilling Alteration

Configure

Clear all

176Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Material

    • Rubber
    • Sponge

    Clear

  • Thickness T(mm)

    • 1
    • 2
    • 3
    • 5
    • 10
    • 15
    • 20
    • 30

    Clear

  • Width A(mm)

     [25-500/1mm Unit(s)]

    Clear

  • Length B(mm)

     [25-500/1mm Unit(s)]

    Clear

  • Hardness (Shore, Asker, Penetration)

    • Asker C25
    • Asker C35
    • Shore A45
    • Shore A50
    • Shore A65
    • Shore A70
    • Shore A80

    Clear

  • Specifications

    • 1A (Round Shape, Round Center Hole)
    • 4A (Round Shape, Round Center Hole + 4 Through Holes)
    • 4H (Square Shape, Square Center Hole + 4 Through Holes)
    • 6H (Square Shape, Square Center Hole + 6 Through Holes)
    • 8A (Round Shape, Round Center Hole + 8 Through Holes)
    • 8H (Square Shape, Square Center Hole + 8 Through Holes)
    • A (Round Shape)
    • H (Square Shape, Square Center Hole)

    Clear

  • F(mm)

     [9-492/0.5mm Unit(s)]

    Clear

  • G(mm)

     [9-492/0.5mm Unit(s)]

    Clear

  • N(mm)

     [3-484/0.5mm Unit(s)]

    Clear

  • Q(mm)

     [11-492/0.5mm Unit(s)]

    Clear

  • V(mm)

    • 0
    • 0.5

     [3-496/0.5mm Unit(s)]

    Clear

  • W(mm)

    • 0

     [10-495/0.5mm Unit(s)]

    Clear

  • Type

    • FRAM1A
    • FRAM4A
    • FRAM4H
    • FRAM6H
    • FRAM8A
    • FRAM8H
    • FRAMA
    • FRAMH
    • FRC1A
    • FRC4A
    • FRC4H
    • FRC6H
    • FRC8A
    • FRC8H
    • FRCA
    • FRCAN□□
    • FRCH
    • FREP1A
    • FREP4A
    • FREP4H
    • FREP6H
    • FREP8A
    • FREP8H
    • FREPA
    • FREPH
    • FRFF1A
    • FRFF4A
    • FRFF4H
    • FRFF6H
    • FRFF8A
    • FRFF8H
    • FRFFA
    • FRFFH
    • FRN1A
    • FRN4A
    • FRN4H
    • FRN6H
    • FRN8A
    • FRN8H
    • FRNA
    • FRNH
    • FRSM1A
    • FRSM4A
    • FRSM4H
    • FRSM6H
    • FRSM8A
    • FRSM8H
    • FRSMA
    • FRSMH
    • FSNA□□
    • FSNC□□
    • FSNF□□

    Clear

  • Grade, Type

    • Nitrile (NBR)
      • Nitrile (NBR)
    • Chloroprene (CR)
      • Chloroprene (CR)
      • Chloroprene Rubber Sponge
    • Ethylene (EPDM)
      • Ethylene (EPDM)
    • Silicon (SI)
      • Silicon (SI)
      • Silicon Rubber Sponge
    • Fluorine (FPM)
      • Fluorine (FPM)
      • Fluororubber Sponge
    • Amber Color Rubber

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Optional Attributes

Frequently Asked Questions (FAQ)

Question:

How can you attach a rubber plate?
Answer:

A rubber plate can be attached with double-adhesive tape. MISUMI offers rubber plates with configurable through holes or counterbores with adhesive tape.
Question:

Do you have screw-on rubber panels?
Answer:

MISUMI offers rubber plates that can be screwed on via a through hole or counterbore. The rubber plates with counterbores are well suited for applications that need to form a flat surface.

Question:

Is NBR oil-resistant?
Answer:

The NBR rubber is oil-resistant and is often used as a sealing material for rubber or foam. In addition, NBR has good thermal resistance, which in combination with high abrasion resistance is the best suited NBR material for seals.
Question:

Which material reduces vibrations well?
Answer:

Silicone gel vibration dampers reduce vibrations well. This elastic material reduces the transmission of vibrations to the subsequent component and also contributes to the acoustics.

Question:

What is Vulkollan?
Answer:

Vulkollan is a highly abrasion-resistant polyurethane rubber that has high wear resistance. It is one of the high-performance rubbers that has little pressure deformation and can withstand high impact forces. In addition, Vulkollan has a high tear strength. However, over time Vulkollan may change its colour, but without losing its mechanical properties.

Show more FAQ Close

Complementary Products

MISUMI Unit еxample related to this product

Search for оther еxamples

back next

Tech Support

Technical Support
Tel：+49 69 668173-0 / FAX：+49 69 668173-360
Technical Inquiry

Betalningsmetod

Faktura

Förskottsbetalning

PayPal

Behovsstyrd tillverkning

Ändra vy

Certifikat

  • ISO-9001
  • ISO-14001
  • AEO-certifiering
  • RoHS
  • REACH

MISUMI världen över

Sociala medier

Juridiskt meddelande

Copyright © MISUMI Corporation All Rights Reserved.