Manifold Hydraulic / Outlets 1 Side / 2 Inlets

Order quantities extended (D-JIT)

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
Catalog

Manifold Hydraulic/Outlets 1 Side/2 Inlets:Related Image

Type							Material	Surface Treatment	Max. Operating Pressure
Pitch (P) Standard				Pitch (P) Configurable
30x35 Sq.	40 Sq.	50 Sq.	70 Sq.	30x35 Sq.	40 Sq.	50 Sq.
BMRS	BMRF	BMRFL	BMRL	-	BMRFP	BMRFLP	EN 1.0038 Equiv.	Trivalent Chromate	20.6MPa≈210kgf/cm² or less
-	BMRFM	BMRFLM	BMRLM	-	-	BMRFLMP	EN 1.0038 Equiv.	Electroless Nickel Plating
BMRSR	BMRFR	BMRFLR	-	BMRSRP	BMRFRP	BMRFLRP	EN 1.4301 Equiv.	-
-	BMRFC	-	-	-	-	-	Brass	-	1MPa≈10kgf/cm² or less

Specifications

Part Number

Type

Mounting Hole Change

Number of
Circuits

BMRF
BMRFLP
G-BMRFLP

NA
NA

3
4
4

-
-
-

R3
R2
R2

-
-
-

G2
G3
G3

-
-
-

K2
K4
K4

-
-

P50
P50

(G Thread)

Part Number				Rc (PT), NPT Selection		Pitch P		Number of Pitches N	Total Number of R, G and K Threads	A	B	E	F	X	Y	Mounting Hole
Type		Mounting Hole Change	Number of Circuits	R	G, K	Standard	Configurable 1mm Increment									M
(30x35 Sq.)		NA (Through) T (Tapped) ZT (Counterbore Tapped)	1	1 (1/8) 2 (1/4)	1 (1/8) 2 (1/4)	-	-	0	3	30	35	20	20	15	6	M5
Pitch Standard BMRS BMRSR	Pitch Configurable BMRSRP		2			30	20~50	1	4
			3					2	5
			4					3	6
			5					4	7
			6					5	8
			7					6	9
			8				20~40	7	10
(40 Sq.)			1	1 (1/8) 2 (1/4) 3 (3/8) 1N (NPT1/8) 2N (NPT1/4) 3N (NPT3/8)	2 (1/4) 3 (3/8) 4 (1/2) 2N (NPT1/4) 3N (NPT3/8) 4N (NPT1/2)	-	-	0	3	40	40	35	20	20	7	M6
Pitch Standard BMRF BMRFM BMRFR BMRFC	Pitch Configurable BMRFP BMRFRP		2			40	25~50	1	4
			3					2	5
			4					3	6
			5					4	7
			6					5	8
			7				20~45	6	9
			8				20~40	7	10
(50 Sq.)			1	2 (1/4) 3 (3/8) 4 (1/2) 6 (3/4)	2 (1/4) 3 (3/8) 4 (1/2) 6 (3/4)	-	-	0	3	50	50	30	28	20	8	M8
Pitch Standard BMRFL BMRFLM BMRFLR	Pitch Configurable BMRFLP BMRFLMP BMRFLRP		2			60	35~60	1	4
			3					2	5
			4					3	6
			5					4	7
			6					5	8
(70 Sq.)			1	6 (3/4) 8 (1)	8 (1)	-	-	0	3	70	70	40	35	25	9	M8
Pitch Standard BMRL BMRLM			2			60		1	4
			3					2	5
			4					3	6

By inserting "G-" before part number, the thread type can be changed to the G (PF) Thread as part of ordering. (Ex.: G-BMRF) For ordering, see the Ordering Example.
For R, G and K, specify 1, 2, 3, 4, 6, 8, 1N, 2N, 3N or 4N indicated before ( ). Single Circuit is not available for Pitch Configurable Type. Brass is for up to 6 connections.
Specify the pitch taking into consideration the necessary dimensions for fitting the couplings. Each 6 and 8 Circuit Type has an additional mounting hole at the midpoint of the overall length. 7 Circuit Type has an additional mounting hole at each midpoint of the 2 - 3 port pitch, and 5 - 6 port pitch from the left to the right.

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

1
2
3
4
5
Next >>

Part Number
BMRFLR1-R[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMRFLR2-R[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMRFLR3-R[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMRFLR4-R[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMRFLR5-R[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMRFLR6-R[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMRFLRNA1-R[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMRFLRNA2-R[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMRFLRNA3-R[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMRFLRNA4-R[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMRFLRNA5-R[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMRFLRNA6-R[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMRFLRP2-R[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
BMRFLRP3-R[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
BMRFLRP4-R[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
BMRFLRP5-R[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
BMRFLRP6-R[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
BMRFLRPNA2-R[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
BMRFLRPNA3-R[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
BMRFLRPNA4-R[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
BMRFLRPNA5-R[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
BMRFLRPNA6-R[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
BMRFLRPT2-R[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
BMRFLRPT3-R[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
BMRFLRPT4-R[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
BMRFLRPT5-R[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
BMRFLRPT6-R[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
BMRFLRPZT2-R[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
BMRFLRPZT3-R[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
BMRFLRPZT4-R[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
BMRFLRPZT5-R[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
BMRFLRPZT6-R[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]-P[35-60/1]
BMRFLRT1-R[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMRFLRT2-R[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMRFLRT3-R[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMRFLRT4-R[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMRFLRT5-R[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMRFLRT6-R[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMRFLRZT1-R[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMRFLRZT2-R[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMRFLRZT3-R[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMRFLRZT4-R[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMRFLRZT5-R[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMRFLRZT6-R[2,3,4,6]-G[2,3,4,6]-K[2,3,4,6]
BMRFR1-[R1N,R2N,R3N]-[G2N,G3N,G4N]-[K2N,K3N,K4N]
BMRFR1-[R1N,R2N,R3N]-[G2N,G3N,G4N]-K[2,3,4]
BMRFR1-[R1N,R2N,R3N]-G[2,3,4]-[K2N,K3N,K4N]
BMRFR1-[R1N,R2N,R3N]-G[2,3,4]-K[2,3,4]
BMRFR1-R[1,2,3]-[G2N,G3N,G4N]-[K2N,K3N,K4N]
BMRFR1-R[1,2,3]-[G2N,G3N,G4N]-K[2,3,4]
BMRFR1-R[1,2,3]-G[2,3,4]-[K2N,K3N,K4N]
BMRFR1-R[1,2,3]-G[2,3,4]-K[2,3,4]
BMRFR2-[R1N,R2N,R3N]-[G2N,G3N,G4N]-[K2N,K3N,K4N]
BMRFR2-[R1N,R2N,R3N]-[G2N,G3N,G4N]-K[2,3,4]
BMRFR2-[R1N,R2N,R3N]-G[2,3,4]-[K2N,K3N,K4N]
BMRFR2-[R1N,R2N,R3N]-G[2,3,4]-K[2,3,4]
BMRFR2-R[1,2,3]-[G2N,G3N,G4N]-[K2N,K3N,K4N]
BMRFR2-R[1,2,3]-[G2N,G3N,G4N]-K[2,3,4]
BMRFR2-R[1,2,3]-G[2,3,4]-[K2N,K3N,K4N]
BMRFR2-R[1,2,3]-G[2,3,4]-K[2,3,4]

Standard Unit Price	Minimum order quantity	Standard Shipping Days ?	RoHS	Material	Surface Treatment	Block Size (mm)	Number of Circuits (Circuits)	Thread Size / Type	Mounting Hole Change	Pitch P (mm)	Pitch Standard / Configurable	Application	Drawing G Part Thread Dia. NPT Selection [G]	Drawing K Part Thread Dia. NPT Selection [K]	Drawing R Part Thread Dia. NPT Selection [R]	Select a value for PT/PF Thread Dia. on G (in Drawing). [G] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 6(3/4) 8(1)	Select a value for PT/PF Thread Dia. on K (in Drawing). [K] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 6(3/4) 8(1)	Select a value for PT/PF Thread Dia. on R (in Drawing). [R] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 6(3/4) 8(1)
-	1	10 Days	10	EN 1.4301 Equiv.	Not Provided	50 x 50	1	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	60	Fixed Type	For Water Hydraulic	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.4301 Equiv.	Not Provided	50 x 50	2	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	60	Fixed Type	For Water Hydraulic	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.4301 Equiv.	Not Provided	50 x 50	3	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	60	Fixed Type	For Water Hydraulic	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.4301 Equiv.	Not Provided	50 x 50	4	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	60	Fixed Type	For Water Hydraulic	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.4301 Equiv.	Not Provided	50 x 50	5	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	60	Fixed Type	For Water Hydraulic	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.4301 Equiv.	Not Provided	50 x 50	6	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	60	Fixed Type	For Water Hydraulic	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.4301 Equiv.	Not Provided	50 x 50	1	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	60	Fixed Type	For Water Hydraulic	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.4301 Equiv.	Not Provided	50 x 50	2	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	60	Fixed Type	For Water Hydraulic	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.4301 Equiv.	Not Provided	50 x 50	3	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	60	Fixed Type	For Water Hydraulic	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.4301 Equiv.	Not Provided	50 x 50	4	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	60	Fixed Type	For Water Hydraulic	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.4301 Equiv.	Not Provided	50 x 50	5	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	60	Fixed Type	For Water Hydraulic	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.4301 Equiv.	Not Provided	50 x 50	6	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	60	Fixed Type	For Water Hydraulic	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.4301 Equiv.	Not Provided	50 x 50	2	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	35 ～ 60	Configurable Type	For Water Hydraulic	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.4301 Equiv.	Not Provided	50 x 50	3	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	35 ～ 60	Configurable Type	For Water Hydraulic	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.4301 Equiv.	Not Provided	50 x 50	4	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	35 ～ 60	Configurable Type	For Water Hydraulic	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.4301 Equiv.	Not Provided	50 x 50	5	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	35 ～ 60	Configurable Type	For Water Hydraulic	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.4301 Equiv.	Not Provided	50 x 50	6	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	35 ～ 60	Configurable Type	For Water Hydraulic	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.4301 Equiv.	Not Provided	50 x 50	2	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	35 ～ 60	Configurable Type	For Water Hydraulic	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.4301 Equiv.	Not Provided	50 x 50	3	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	35 ～ 60	Configurable Type	For Water Hydraulic	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.4301 Equiv.	Not Provided	50 x 50	4	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	35 ～ 60	Configurable Type	For Water Hydraulic	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.4301 Equiv.	Not Provided	50 x 50	5	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	35 ～ 60	Configurable Type	For Water Hydraulic	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.4301 Equiv.	Not Provided	50 x 50	6	Standard Thread {PT, m (Coarse) Thread}	NA (Through)	35 ～ 60	Configurable Type	For Water Hydraulic	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.4301 Equiv.	Not Provided	50 x 50	2	Standard Thread {PT, m (Coarse) Thread}	T (Tapped)	35 ～ 60	Configurable Type	For Water Hydraulic	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.4301 Equiv.	Not Provided	50 x 50	3	Standard Thread {PT, m (Coarse) Thread}	T (Tapped)	35 ～ 60	Configurable Type	For Water Hydraulic	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.4301 Equiv.	Not Provided	50 x 50	4	Standard Thread {PT, m (Coarse) Thread}	T (Tapped)	35 ～ 60	Configurable Type	For Water Hydraulic	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.4301 Equiv.	Not Provided	50 x 50	5	Standard Thread {PT, m (Coarse) Thread}	T (Tapped)	35 ～ 60	Configurable Type	For Water Hydraulic	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.4301 Equiv.	Not Provided	50 x 50	6	Standard Thread {PT, m (Coarse) Thread}	T (Tapped)	35 ～ 60	Configurable Type	For Water Hydraulic	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.4301 Equiv.	Not Provided	50 x 50	2	Standard Thread {PT, m (Coarse) Thread}	ZT (Counterbore Tapped)	35 ～ 60	Configurable Type	For Water Hydraulic	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.4301 Equiv.	Not Provided	50 x 50	3	Standard Thread {PT, m (Coarse) Thread}	ZT (Counterbore Tapped)	35 ～ 60	Configurable Type	For Water Hydraulic	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.4301 Equiv.	Not Provided	50 x 50	4	Standard Thread {PT, m (Coarse) Thread}	ZT (Counterbore Tapped)	35 ～ 60	Configurable Type	For Water Hydraulic	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.4301 Equiv.	Not Provided	50 x 50	5	Standard Thread {PT, m (Coarse) Thread}	ZT (Counterbore Tapped)	35 ～ 60	Configurable Type	For Water Hydraulic	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.4301 Equiv.	Not Provided	50 x 50	6	Standard Thread {PT, m (Coarse) Thread}	ZT (Counterbore Tapped)	35 ～ 60	Configurable Type	For Water Hydraulic	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.4301 Equiv.	Not Provided	50 x 50	1	Standard Thread {PT, m (Coarse) Thread}	T (Tapped)	60	Fixed Type	For Water Hydraulic	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.4301 Equiv.	Not Provided	50 x 50	2	Standard Thread {PT, m (Coarse) Thread}	T (Tapped)	60	Fixed Type	For Water Hydraulic	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.4301 Equiv.	Not Provided	50 x 50	3	Standard Thread {PT, m (Coarse) Thread}	T (Tapped)	60	Fixed Type	For Water Hydraulic	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.4301 Equiv.	Not Provided	50 x 50	4	Standard Thread {PT, m (Coarse) Thread}	T (Tapped)	60	Fixed Type	For Water Hydraulic	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.4301 Equiv.	Not Provided	50 x 50	5	Standard Thread {PT, m (Coarse) Thread}	T (Tapped)	60	Fixed Type	For Water Hydraulic	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.4301 Equiv.	Not Provided	50 x 50	6	Standard Thread {PT, m (Coarse) Thread}	T (Tapped)	60	Fixed Type	For Water Hydraulic	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.4301 Equiv.	Not Provided	50 x 50	1	Standard Thread {PT, m (Coarse) Thread}	ZT (Counterbore Tapped)	60	Fixed Type	For Water Hydraulic	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.4301 Equiv.	Not Provided	50 x 50	2	Standard Thread {PT, m (Coarse) Thread}	ZT (Counterbore Tapped)	60	Fixed Type	For Water Hydraulic	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.4301 Equiv.	Not Provided	50 x 50	3	Standard Thread {PT, m (Coarse) Thread}	ZT (Counterbore Tapped)	60	Fixed Type	For Water Hydraulic	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.4301 Equiv.	Not Provided	50 x 50	4	Standard Thread {PT, m (Coarse) Thread}	ZT (Counterbore Tapped)	60	Fixed Type	For Water Hydraulic	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.4301 Equiv.	Not Provided	50 x 50	5	Standard Thread {PT, m (Coarse) Thread}	ZT (Counterbore Tapped)	60	Fixed Type	For Water Hydraulic	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.4301 Equiv.	Not Provided	50 x 50	6	Standard Thread {PT, m (Coarse) Thread}	ZT (Counterbore Tapped)	60	Fixed Type	For Water Hydraulic	-	-	-	2 ～ 6	2 ～ 6	2 ～ 6
-	1	10 Days	10	EN 1.4301 Equiv.	Not Provided	40 x 40	1	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	For Water Hydraulic	1/2 [G4N] / 1/4 [G2N] / 3/8 [G3N]	1/2 [K4N] / 1/4 [K2N] / 3/8 [K3N]	1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]	-	-	-
-	1	10 Days	10	EN 1.4301 Equiv.	Not Provided	40 x 40	1	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	For Water Hydraulic	1/2 [G4N] / 1/4 [G2N] / 3/8 [G3N]	-	1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]	-	2 ～ 4	-
-	1	10 Days	10	EN 1.4301 Equiv.	Not Provided	40 x 40	1	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	For Water Hydraulic	-	1/2 [K4N] / 1/4 [K2N] / 3/8 [K3N]	1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]	2 ～ 4	-	-
-	1	10 Days	10	EN 1.4301 Equiv.	Not Provided	40 x 40	1	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	For Water Hydraulic	-	-	1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]	2 ～ 4	2 ～ 4	-
-	1	10 Days	10	EN 1.4301 Equiv.	Not Provided	40 x 40	1	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	For Water Hydraulic	1/2 [G4N] / 1/4 [G2N] / 3/8 [G3N]	1/2 [K4N] / 1/4 [K2N] / 3/8 [K3N]	-	-	-	1 ～ 3
-	1	10 Days	10	EN 1.4301 Equiv.	Not Provided	40 x 40	1	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	For Water Hydraulic	1/2 [G4N] / 1/4 [G2N] / 3/8 [G3N]	-	-	-	2 ～ 4	1 ～ 3
-	1	10 Days	10	EN 1.4301 Equiv.	Not Provided	40 x 40	1	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	For Water Hydraulic	-	1/2 [K4N] / 1/4 [K2N] / 3/8 [K3N]	-	2 ～ 4	-	1 ～ 3
-	1	10 Days	10	EN 1.4301 Equiv.	Not Provided	40 x 40	1	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	For Water Hydraulic	-	-	-	2 ～ 4	2 ～ 4	1 ～ 3
-	1	10 Days	10	EN 1.4301 Equiv.	Not Provided	40 x 40	2	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	For Water Hydraulic	1/2 [G4N] / 1/4 [G2N] / 3/8 [G3N]	1/2 [K4N] / 1/4 [K2N] / 3/8 [K3N]	1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]	-	-	-
-	1	10 Days	10	EN 1.4301 Equiv.	Not Provided	40 x 40	2	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	For Water Hydraulic	1/2 [G4N] / 1/4 [G2N] / 3/8 [G3N]	-	1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]	-	2 ～ 4	-
-	1	10 Days	10	EN 1.4301 Equiv.	Not Provided	40 x 40	2	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	For Water Hydraulic	-	1/2 [K4N] / 1/4 [K2N] / 3/8 [K3N]	1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]	2 ～ 4	-	-
-	1	10 Days	10	EN 1.4301 Equiv.	Not Provided	40 x 40	2	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	For Water Hydraulic	-	-	1/4 [R2N] / 1/8 [R1N] / 3/8 [R3N]	2 ～ 4	2 ～ 4	-
-	1	10 Days	10	EN 1.4301 Equiv.	Not Provided	40 x 40	2	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	For Water Hydraulic	1/2 [G4N] / 1/4 [G2N] / 3/8 [G3N]	1/2 [K4N] / 1/4 [K2N] / 3/8 [K3N]	-	-	-	1 ～ 3
-	1	10 Days	10	EN 1.4301 Equiv.	Not Provided	40 x 40	2	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	For Water Hydraulic	1/2 [G4N] / 1/4 [G2N] / 3/8 [G3N]	-	-	-	2 ～ 4	1 ～ 3
-	1	10 Days	10	EN 1.4301 Equiv.	Not Provided	40 x 40	2	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	For Water Hydraulic	-	1/2 [K4N] / 1/4 [K2N] / 3/8 [K3N]	-	2 ～ 4	-	1 ～ 3
-	1	10 Days	10	EN 1.4301 Equiv.	Not Provided	40 x 40	2	Standard Thread {PT, m (Coarse) Thread}	Not Specified (Counterbore)	40	Fixed Type	For Water Hydraulic	-	-	-	2 ～ 4	2 ～ 4	1 ～ 3

1
2
3
4
5
Next >>

Products homepage

Basic information

Shape	Lateral Through Hole, Vertical Semi-Through Hole

Configure

748Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Surface Treatment
- Not Provided
- Trivalent Chromate
- Electroless Nickel Plating
Clear
Block Size(mm)
- 30 x 35
- 40 x 40
- 50 x 50
- 70 x 70
Clear
Number of Circuits(Circuits)
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
Clear
Thread Size / Type
G (PF) Thread

Standard Thread {PT, m (Coarse) Thread}
Clear
Mounting Hole Change
- NA (Through)
- Not Specified (Counterbore)
- T (Tapped)
- ZT (Counterbore Tapped)
Clear
Pitch P(mm)
30

40

60
[20-60/1mm Unit(s)]
Clear
Pitch Standard / Configurable
- Configurable Type
- Fixed Type
Clear
Application
- For Oil, Water Hydraulic
- For Water Hydraulic
- For hydraulic / Water Pressure
Clear
Drawing G Part Thread Dia. NPT Selection [G]
- 1/2 [G4N]
- 1/4 [G2N]
- 3/8 [G3N]
Clear
Drawing K Part Thread Dia. NPT Selection [K]
- 1/2 [K4N]
- 1/4 [K2N]
- 3/8 [K3N]
Clear
Drawing R Part Thread Dia. NPT Selection [R]
- 1/4 [R2N]
- 1/8 [R1N]
- 3/8 [R3N]
Clear
Select a value for PT/PF Thread Dia. on G (in Drawing). [G] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 6(3/4) 8(1)
1

2

3

4

6

8
Clear
Select a value for PT/PF Thread Dia. on K (in Drawing). [K] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 6(3/4) 8(1)
1

2

3

4

6

8
Clear
Select a value for PT/PF Thread Dia. on R (in Drawing). [R] 1(1/8) 2(1/4) 3(3/8) 4(1/2) 6(3/4) 8(1)
1

2

3

4

6

8
Clear
Type
- BMRF
- BMRFC
- BMRFL
- BMRFLM
- BMRFLMP
- BMRFLP
- BMRFLR
- BMRFLRP
- BMRFM
- BMRFP
- BMRFR
- BMRFRP
- BMRL
- BMRLM
- BMRS
- BMRSR
- BMRSRP
- G-BMRF
- G-BMRFC
- G-BMRFL
- G-BMRFLM
- G-BMRFLMP
- G-BMRFLP
- G-BMRFLR
- G-BMRFLRP
- G-BMRFM
- G-BMRFP
- G-BMRFR
- G-BMRFRP
- G-BMRL
- G-BMRLM
- G-BMRS
- G-BMRSR
- G-BMRSRP
Clear
Material
- EN 1.0038 Equiv.
- EN 1.4301 Equiv.
- Brass
Clear
Filter by CAD data type
- 2D
- 3D
Clear