• Märken
  • Företag
  • Kontakt
SV
Type Code Seach | *NOT READY*
#CODE
Förslag på nyckelord
Förslag på artikelnummer
Discontinued Products

Ball Splines / Both Ends Tapped (Part Numbers - CAD Download)

Ball Splines / Both Ends Tapped

Click on this image to zoom in.

Click on this image to zoom in.

MISUMI

MISUMI

(i)Remark

  • The spline nut key or the positional relationship between the mounting hole and any alteration, including wrench flats, set screw flats, keyways, etc., cannot be specified. The alteration position displayed in the 3D preview is only an example and differs from the actual machining position
  • Please check the content on our website as the PDF does not contain the most up-to-date information.

Data sheet

Unit еxample related to this product
Swing clamp
Search for оther еxamples

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Ball Splines/Both Ends Tapped:Related Image
 
Both Ends TappedSpline Shafts  [ M ]  EN 1.3505 Equiv. Nut
 [ M ]  EN 1.7242 Equiv.  [ H ]  Hardness: 58HRC~		Spline Shaft, Nut  [ M ]  Material: EN 1.4125 Equiv.  [ H ]  Hardness: 55HRC~
Nut 1 pc.Nut 2 pcs.Nut 1 pc.
With Round Flange NutBSHMBSH2MBASBFS
With Compact Flange NutBSHNBSH2N-
With Straight NutBSHSBSH2SBASBSS

Specifications

Part Number-L-M-N

Ball Splines/Both Ends Tapped:Related Image
Ball Splines/Both Ends Tapped:Related Image		BSHS8
BSHS8G
BSHS8L		-
-
-		270
270
270		-
-
-		M4
M4
M4		-
-
-		N4
N4
N4
Alternative grease types available.
For Days to Ship, Price and Performance, see  >>  P.340
 ■ Spline Shafts
Part NumberL 1mm IncrementM (Coarse) / N (Coarse) SelectionDMass
(kg/m)
TypeNo.1-Nut Type2-Nut Type
BSHM
BSHN
BSHS
BSH2M
BSH2N
BSH2S
BASBFS
BASBSS		*660~400(190)60~4003       60.23
*860~400(190)60~40034      80.39
*1060~600(390)90~600345     10.40.65
*1360~600(390)100~600 456    13.41.11
*1670~600(390)110~600 4568   16.61.65
2080~700130~700  56810  20.62.57
2590~900150~900  5681012 25.84.04
30100~1150170~1150   6810121630.85.85
 [ ! ] For BASBFS and BASBSS, only * marked sizes are available, and the Max. L dimension is in ( ).
 [ ! ] For BSHN and BSH2N, only No. 6, 8 and 10 are available.

 ■ Round Flange Nuts, Compact Flange Nuts
No.D(h6)LDfHP.C.D.d1d2hWdBBasic Rated TorqueBasic Load RatingAllowable Static MomentMass
(kg)
Dynamic Ct
(N · m)		Static C0t
(N · m)		Dynamic C
(kN)		Static C0
(kN)		M01
(N · m)		M02
(N · m)
61425306223.563.16.51.5183.871.22.15360.03
8163224214.88.71.22.15360.04
102140(33)42(41)6(8)32(30)4.584.4(5.3)14(8.5)2519(11)34(21)3.8(2.4)6.9(4.3)26(15)181(102)0.09
132444(36)44(45)7(8)33(34)15(10)-28(20)52(37)4.6(3.3)8.3(5.9)36(22)251(148)0.11
163150517404.41851936.211.1563860.2
203563589455.59.55.422.52851548.515.3836110.3
254271655226.519334815.427.717312480.4
3047807510606.6116.5302.527249018.533.321215810.57
  Dimensions in ( ) are for EN 1.4125 Equiv.   Allowable static moment M01 is a value measured when a single nut is used, and M02 is a value measured when two nuts are used.
 
■ Straight Nuts
No.D
(h6)		Lb t
( +0.05
0 )		dαBasic Rated TorqueBasic Load RatingAllowable Static MomentMass
(kg)		Dimensions of Key (Included)
ToleranceDynamic Ct
(N · m)		Static C0t
(N · m)		Dynamic C
(kN)		Static C0
(kN)		M01
(N · m)		M02
(N · m)		B h L1R
ToleranceTolerance
614252.5+0.014
0		1.21.515°3.871.22.15360.0122.5+0.016
+0.006		2.50
-0.025		10.51.25
81625°4.88.71.22.15360.01310.5
102140(33)31.5-19(11)34(21)3.8(2.4)6.9(4.3)26(15)181(102)0.063317(14)1.5
132444(36)28(20)52(37)4.6(3.3)8.3(5.9)36(22)251(148)0.0717(14)
1631503.5+0.018
0		251936.211.1563860.153.5+0.024
+0.012		3.50
-0.030		181.75
20356342.52851548.515.3836110.244292
25427119334815.427.717312480.2933
3047802.527249018.533.321215810.3742
  Dimensions in ( ) are for EN 1.4125 Equiv.   Allowable static moment M01 is a value measured when a single nut is used, and M02 is a value measured when two nuts are used.

Alterations

Ball Splines/Both Ends Tapped:Related Image
The angular positional relationship between alterations (machining position) and spline nut (hole pattern) cannot be specified (individual angular position for machining).
 

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
  2. 2
  3. 3
  4. Next >>
Part Number
BASBFS6-[60-190/1]-M3-N3
BASBFS6G-[60-190/1]-M3-N3
BASBFS6L-[60-190/1]-M3-N3
BASBFS8-[60-190/1]-M[3,​4]-N[3,​4]
BASBFS8G-[60-190/1]-M[3,​4]-N[3,​4]
BASBFS8L-[60-190/1]-M[3,​4]-N[3,​4]
BASBFS10-[60-390/1]-M[3,​4,​5]-N[3,​4,​5]
BASBFS10G-[60-390/1]-M[3,​4,​5]-N[3,​4,​5]
BASBFS10L-[60-390/1]-M[3,​4,​5]-N[3,​4,​5]
BASBFS13-[60-390/1]-M[4,​5,​6]-N[4,​5,​6]
BASBFS13G-[60-390/1]-M[4,​5,​6]-N[4,​5,​6]
BASBFS13L-[60-390/1]-M[4,​5,​6]-N[4,​5,​6]
BASBFS16-[70-390/1]-M[4,​5,​6,​8]-N[4,​5,​6,​8]
BASBFS16G-[70-390/1]-M[4,​5,​6,​8]-N[4,​5,​6,​8]
BASBFS16L-[70-390/1]-M[4,​5,​6,​8]-N[4,​5,​6,​8]
BASBSS6-[60-190/1]-M3-N3
BASBSS6G-[60-190/1]-M3-N3
BASBSS6L-[60-190/1]-M3-N3
BASBSS8-[60-190/1]-M[3,​4]-N[3,​4]
BASBSS8G-[60-190/1]-M[3,​4]-N[3,​4]
BASBSS8L-[60-190/1]-M[3,​4]-N[3,​4]
BASBSS10-[60-390/1]-M[3,​4,​5]-N[3,​4,​5]
BASBSS10G-[60-390/1]-M[3,​4,​5]-N[3,​4,​5]
BASBSS10L-[60-390/1]-M[3,​4,​5]-N[3,​4,​5]
BASBSS13-[60-390/1]-M[4,​5,​6]-N[4,​5,​6]
BASBSS13G-[60-390/1]-M[4,​5,​6]-N[4,​5,​6]
BASBSS13L-[60-390/1]-M[4,​5,​6]-N[4,​5,​6]
BASBSS16-[70-390/1]-M[4,​5,​6,​8]-N[4,​5,​6,​8]
BASBSS16G-[70-390/1]-M[4,​5,​6,​8]-N[4,​5,​6,​8]
BASBSS16L-[70-390/1]-M[4,​5,​6,​8]-N[4,​5,​6,​8]
BSH2M6-[60-400/1]-M3-N3
BSH2M6G-[60-400/1]-M3-N3
BSH2M6L-[60-400/1]-M3-N3
BSH2M8-[60-400/1]-M[3,​4]-N[3,​4]
BSH2M8G-[60-400/1]-M[3,​4]-N[3,​4]
BSH2M8L-[60-400/1]-M[3,​4]-N[3,​4]
BSH2M10-[90-600/1]-M[3,​4,​5]-N[3,​4,​5]
BSH2M10G-[90-600/1]-M[3,​4,​5]-N[3,​4,​5]
BSH2M10L-[90-600/1]-M[3,​4,​5]-N[3,​4,​5]
BSH2M13-[100-600/1]-M[4,​5,​6]-N[4,​5,​6]
BSH2M13G-[100-600/1]-M[4,​5,​6]-N[4,​5,​6]
BSH2M13L-[100-600/1]-M[4,​5,​6]-N[4,​5,​6]
BSH2M16-[110-600/1]-M[4,​5,​6,​8]-N[4,​5,​6,​8]
BSH2M16G-[110-600/1]-M[4,​5,​6,​8]-N[4,​5,​6,​8]
BSH2M16L-[110-600/1]-M[4,​5,​6,​8]-N[4,​5,​6,​8]
BSH2M20-[130-700/1]-M[5,​6,​8,​10]-N[5,​6,​8,​10]
BSH2M20G-[130-700/1]-M[5,​6,​8,​10]-N[5,​6,​8,​10]
BSH2M20L-[130-700/1]-M[5,​6,​8,​10]-N[5,​6,​8,​10]
BSH2M25-[150-900/1]-M[5,​6,​8,​10,​12]-N[5,​6,​8,​10,​12]
BSH2M25G-[150-900/1]-M[5,​6,​8,​10,​12]-N[5,​6,​8,​10,​12]
BSH2M25L-[150-900/1]-M[5,​6,​8,​10,​12]-N[5,​6,​8,​10,​12]
BSH2M30-[170-1150/1]-M[6,​8,​10,​12,​16]-N[6,​8,​10,​12,​16]
BSH2M30G-[170-1150/1]-M[6,​8,​10,​12,​16]-N[6,​8,​10,​12,​16]
BSH2M30L-[170-1150/1]-M[6,​8,​10,​12,​16]-N[6,​8,​10,​12,​16]
BSH2N6-[60-400/1]-M3-N3
BSH2N6G-[60-400/1]-M3-N3
BSH2N6L-[60-400/1]-M3-N3
BSH2N8-[60-400/1]-M[3,​4]-N[3,​4]
BSH2N8G-[60-400/1]-M[3,​4]-N[3,​4]
BSH2N8L-[60-400/1]-M[3,​4]-N[3,​4]
Part Number
Standard Unit Price
Minimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSNut type Shaft O.D. D
(φ) 		Shaft material Number of nuts
(pcs.) 		Nut Overall Length
(mm) 		Nut O.D.
(φ) 		Shaft Overall Length L
(mm) 		Basic Load Rating Dynamic Rating
(N) 		Allowable Torque
(Nm) 		Nut Material Grease M
(mm) 		N
(mm)

-

1 9 Days 10[Flange Type] Round Flanged6EN 1.4125 Equiv.1251460 ～ 19012003.8EN 1.4125 Equiv.Standard (S2)33

-

1 11 Days 10[Flange Type] Round Flanged6EN 1.4125 Equiv.1251460 ～ 19012003.8EN 1.4125 Equiv.LG233

-

1 11 Days 10[Flange Type] Round Flanged6EN 1.4125 Equiv.1251460 ～ 19012003.8EN 1.4125 Equiv.ET-100K33

-

1 9 Days 10[Flange Type] Round Flanged8EN 1.4125 Equiv.1251660 ～ 19012004.8EN 1.4125 Equiv.Standard (S2)3 ～ 43 ～ 4

-

1 11 Days 10[Flange Type] Round Flanged8EN 1.4125 Equiv.1251660 ～ 19012004.8EN 1.4125 Equiv.LG23 ～ 43 ～ 4

-

1 11 Days 10[Flange Type] Round Flanged8EN 1.4125 Equiv.1251660 ～ 19012004.8EN 1.4125 Equiv.ET-100K3 ～ 43 ～ 4

-

1 9 Days 10[Flange Type] Round Flanged10.4EN 1.4125 Equiv.1332160 ～ 390240011EN 1.4125 Equiv.Standard (S2)3 ～ 53 ～ 5

-

1 11 Days 10[Flange Type] Round Flanged10.4EN 1.4125 Equiv.1332160 ～ 390240011EN 1.4125 Equiv.LG23 ～ 53 ～ 5

-

1 11 Days 10[Flange Type] Round Flanged10.4EN 1.4125 Equiv.1332160 ～ 390240011EN 1.4125 Equiv.ET-100K3 ～ 53 ～ 5

-

1 9 Days 10[Flange Type] Round Flanged13.4EN 1.4125 Equiv.1362460 ～ 390330020EN 1.4125 Equiv.Standard (S2)4 ～ 64 ～ 6

-

1 11 Days 10[Flange Type] Round Flanged13.4EN 1.4125 Equiv.1362460 ～ 390330020EN 1.4125 Equiv.LG24 ～ 64 ～ 6

-

1 11 Days 10[Flange Type] Round Flanged13.4EN 1.4125 Equiv.1362460 ～ 390330020EN 1.4125 Equiv.ET-100K4 ～ 64 ～ 6

-

1 9 Days 10[Flange Type] Round Flanged16.6EN 1.4125 Equiv.1503170 ～ 390620051EN 1.4125 Equiv.Standard (S2)4 ～ 84 ～ 8

-

1 11 Days 10[Flange Type] Round Flanged16.6EN 1.4125 Equiv.1503170 ～ 390620051EN 1.4125 Equiv.LG24 ～ 84 ～ 8

-

1 11 Days 10[Flange Type] Round Flanged16.6EN 1.4125 Equiv.1503170 ～ 390620051EN 1.4125 Equiv.ET-100K4 ～ 84 ～ 8

-

1 9 Days 10Straight6EN 1.4125 Equiv.1251460 ～ 19012003.8EN 1.4125 Equiv.Standard (S2)33

-

1 11 Days 10Straight6EN 1.4125 Equiv.1251460 ～ 19012003.8EN 1.4125 Equiv.LG233

-

1 11 Days 10Straight6EN 1.4125 Equiv.1251460 ～ 19012003.8EN 1.4125 Equiv.ET-100K33

-

1 9 Days 10Straight8EN 1.4125 Equiv.1251660 ～ 19012004.8EN 1.4125 Equiv.Standard (S2)3 ～ 43 ～ 4

-

1 11 Days 10Straight8EN 1.4125 Equiv.1251660 ～ 19012004.8EN 1.4125 Equiv.LG23 ～ 43 ～ 4

-

1 11 Days 10Straight8EN 1.4125 Equiv.1251660 ～ 19012004.8EN 1.4125 Equiv.ET-100K3 ～ 43 ～ 4

-

1 9 Days -Straight10.4EN 1.4125 Equiv.1332160 ～ 390240011EN 1.4125 Equiv.Standard (S2)3 ～ 53 ～ 5

-

1 11 Days 10Straight10.4EN 1.4125 Equiv.1332160 ～ 390240011EN 1.4125 Equiv.LG23 ～ 53 ～ 5

-

1 11 Days 10Straight10.4EN 1.4125 Equiv.1332160 ～ 390240011EN 1.4125 Equiv.ET-100K3 ～ 53 ～ 5

-

1 9 Days 10Straight13.4EN 1.4125 Equiv.1362460 ～ 390330020EN 1.4125 Equiv.Standard (S2)4 ～ 64 ～ 6

-

1 11 Days 10Straight13.4EN 1.4125 Equiv.1362460 ～ 390330020EN 1.4125 Equiv.LG24 ～ 64 ～ 6

-

1 11 Days 10Straight13.4EN 1.4125 Equiv.1362460 ～ 390330020EN 1.4125 Equiv.ET-100K4 ～ 64 ～ 6

-

1 9 Days 10Straight16.6EN 1.4125 Equiv.1503170 ～ 390620051EN 1.4125 Equiv.Standard (S2)4 ～ 84 ～ 8

-

1 11 Days 10Straight16.6EN 1.4125 Equiv.1503170 ～ 390620051EN 1.4125 Equiv.LG24 ～ 84 ～ 8

-

1 11 Days 10Straight16.6EN 1.4125 Equiv.1503170 ～ 390620051EN 1.4125 Equiv.ET-100K4 ～ 84 ～ 8

-

1 10 Days 10[Flange Type] Round Flanged6EN 1.3505 Equiv.2251460 ～ 40012003.8EN 1.7242 Equiv.Standard (S2)33

-

1 12 Days 10[Flange Type] Round Flanged6EN 1.3505 Equiv.2251460 ～ 40012003.8EN 1.7242 Equiv.LG233

-

1 12 Days 10[Flange Type] Round Flanged6EN 1.3505 Equiv.2251460 ～ 40012003.8EN 1.7242 Equiv.ET-100K33

-

1 10 Days 10[Flange Type] Round Flanged8EN 1.3505 Equiv.2251660 ～ 40012004.8EN 1.7242 Equiv.Standard (S2)3 ～ 43 ～ 4

-

1 12 Days 10[Flange Type] Round Flanged8EN 1.3505 Equiv.2251660 ～ 40012004.8EN 1.7242 Equiv.LG23 ～ 43 ～ 4

-

1 12 Days 10[Flange Type] Round Flanged8EN 1.3505 Equiv.2251660 ～ 40012004.8EN 1.7242 Equiv.ET-100K3 ～ 43 ～ 4

-

1 10 Days 10[Flange Type] Round Flanged10.4EN 1.3505 Equiv.2402190 ～ 600380019EN 1.7242 Equiv.Standard (S2)3 ～ 53 ～ 5

-

1 12 Days 10[Flange Type] Round Flanged10.4EN 1.3505 Equiv.2402190 ～ 600380019EN 1.7242 Equiv.LG23 ～ 53 ～ 5

-

1 12 Days 10[Flange Type] Round Flanged10.4EN 1.3505 Equiv.2402190 ～ 600380019EN 1.7242 Equiv.ET-100K3 ～ 53 ～ 5

-

1 10 Days 10[Flange Type] Round Flanged13.4EN 1.3505 Equiv.24424100 ～ 600460028EN 1.7242 Equiv.Standard (S2)4 ～ 64 ～ 6

-

1 12 Days 10[Flange Type] Round Flanged13.4EN 1.3505 Equiv.24424100 ～ 600460028EN 1.7242 Equiv.LG24 ～ 64 ～ 6

-

1 12 Days 10[Flange Type] Round Flanged13.4EN 1.3505 Equiv.24424100 ～ 600460028EN 1.7242 Equiv.ET-100K4 ～ 64 ～ 6

-

1 10 Days 10[Flange Type] Round Flanged16.6EN 1.3505 Equiv.25031110 ～ 600620051EN 1.7242 Equiv.Standard (S2)4 ～ 84 ～ 8

-

1 12 Days 10[Flange Type] Round Flanged16.6EN 1.3505 Equiv.25031110 ～ 600620051EN 1.7242 Equiv.LG24 ～ 84 ～ 8

-

1 12 Days 10[Flange Type] Round Flanged16.6EN 1.3505 Equiv.25031110 ～ 600620051EN 1.7242 Equiv.ET-100K4 ～ 84 ～ 8

-

1 10 Days 10[Flange Type] Round Flanged20.6EN 1.3505 Equiv.26335130 ～ 700850085EN 1.7242 Equiv.Standard (S2)5 ～ 105 ～ 10

-

1 12 Days 10[Flange Type] Round Flanged20.6EN 1.3505 Equiv.26335130 ～ 700850085EN 1.7242 Equiv.LG25 ～ 105 ～ 10

-

1 12 Days 10[Flange Type] Round Flanged20.6EN 1.3505 Equiv.26335130 ～ 700850085EN 1.7242 Equiv.ET-100K5 ～ 105 ～ 10

-

1 10 Days 10[Flange Type] Round Flanged25.8EN 1.3505 Equiv.27142150 ～ 90015400193EN 1.7242 Equiv.Standard (S2)5 ～ 125 ～ 12

-

1 12 Days 10[Flange Type] Round Flanged25.8EN 1.3505 Equiv.27142150 ～ 90015400193EN 1.7242 Equiv.LG25 ～ 125 ～ 12

-

1 12 Days 10[Flange Type] Round Flanged25.8EN 1.3505 Equiv.27142150 ～ 90015400193EN 1.7242 Equiv.ET-100K5 ～ 125 ～ 12

-

1 10 Days 10[Flange Type] Round Flanged30.8EN 1.3505 Equiv.28047170 ～ 115018500272EN 1.7242 Equiv.Standard (S2)6 ～ 166 ～ 16

-

1 12 Days 10[Flange Type] Round Flanged30.8EN 1.3505 Equiv.28047170 ～ 115018500272EN 1.7242 Equiv.LG26 ～ 166 ～ 16

-

1 12 Days 10[Flange Type] Round Flanged30.8EN 1.3505 Equiv.28047170 ～ 115018500272EN 1.7242 Equiv.ET-100K6 ～ 166 ～ 16

-

1 10 Days 10[Flange Type] Compact Flanged6EN 1.3505 Equiv.2251460 ～ 40012003.8EN 1.7242 Equiv.Standard (S2)33

-

1 12 Days 10[Flange Type] Compact Flanged6EN 1.3505 Equiv.2251460 ～ 40012003.8EN 1.7242 Equiv.LG233

-

1 12 Days 10[Flange Type] Compact Flanged6EN 1.3505 Equiv.2251460 ～ 40012003.8EN 1.7242 Equiv.ET-100K33

-

1 10 Days 10[Flange Type] Compact Flanged8EN 1.3505 Equiv.2251660 ～ 40012004.8EN 1.7242 Equiv.Standard (S2)3 ～ 43 ～ 4

-

1 12 Days 10[Flange Type] Compact Flanged8EN 1.3505 Equiv.2251660 ～ 40012004.8EN 1.7242 Equiv.LG23 ～ 43 ～ 4

-

1 12 Days 10[Flange Type] Compact Flanged8EN 1.3505 Equiv.2251660 ～ 40012004.8EN 1.7242 Equiv.ET-100K3 ～ 43 ～ 4

Loading...

  1. 1
  2. 2
  3. 3
  4. Next >>

More Information

Ball Splines/Both Ends Tapped:Related Image
 

Basic information

Shaft end shape (left) Tapped Shaft end shape (right) Tapped Type Solid
Torque Middle Torque Nut length Standard Preload Standard
Accuracy Grade Standard Grade The circulation type of balls 1-fach

Configure

Clear all

144Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Nut type

    • Straight
    • Flange Type
      • Compact Flanged
      • Round Flanged

    Clear

  • Shaft O.D. D(φ)

    • 6
    • 8
    • 10.4
    • 13.4
    • 16.6
    • 20.6
    • 25.8
    • 30.8

    Clear

  • Shaft material

    • EN 1.3505 Equiv.
    • EN 1.4125 Equiv.

    Clear

  • Number of nuts(pcs.)

    • 1
    • 2

    Clear

  • Nut Overall Length(mm)

    • 25
    • 33
    • 36
    • 40
    • 44
    • 50
    • 63
    • 71
    • 80

    Clear

  • Nut O.D.(φ)

    • 14
    • 16
    • 21
    • 24
    • 31
    • 35
    • 42
    • 47

    Clear

  • Shaft Overall Length L(mm)

     [60-1300/1mm Unit(s)]

    Clear

  • Nut Material

    • EN 1.4125 Equiv.
    • EN 1.7242 Equiv.

    Clear

  • Grease

    • ET-100K
    • LG2
    • Standard (S2)

    Clear

  • M(mm)

    • 3
    • 4
    • 5
    • 6
    • 8
    • 10
    • 12
    • 16

    Clear

  • N(mm)

    • 3
    • 4
    • 5
    • 6
    • 8
    • 10
    • 12
    • 16

    Clear

  • Type

    • BASBFS
    • BASBSS
    • BSH2M
    • BSH2N
    • BSH2S
    • BSHM
    • BSHN
    • BSHS

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 9 Days or Less
    • 10 Days or Less
    • 11 Days or Less
    • 12 Days or Less

    Reset

Optional Attributes

Complementary Products

MISUMI Unit еxample related to this product

Search for оther еxamples

back next

Tech Support

Technical Support
Tel：+49 69 668173-0 / FAX：+49 69 668173-360
Technical Inquiry

Betalningsmetod

Faktura

Förskottsbetalning

PayPal

Behovsstyrd tillverkning

Ändra vy

Certifikat

  • ISO-9001
  • ISO-14001
  • AEO-certifiering
  • RoHS
  • REACH

MISUMI världen över

Sociala medier

Juridiskt meddelande

Copyright © MISUMI Corporation All Rights Reserved.