Rotary axes / offset on one side with internal thread / machining selectable

Click on this image to zoom in.

Order quantities extended (D-JIT)

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
More Information
Catalog
Technical Information

Rotary Shafts/One End Stepped/One End Tapped:Related Image

Type			Tolerance		Material	Surface Treatment
	Standard	Wrench Flats	D	P	Material	Surface Treatment
	SFRMHF	SFRMHFS	h9 (Cold-drawn)	h7	EN 1.1191 Equiv.	Black Oxide
	PSFRMHF	PSFRMHFS			EN 1.1191 Equiv.	Electroless Nickel Plating
	SSFRMHF	SSFRMHFS			EN 1.4301 Equiv.	-
	SFRMGF	SFRMGFS		g6	EN 1.1191 Equiv.	Black Oxide
	PSFRMGF	PSFRMGFS			EN 1.1191 Equiv.	Electroless Nickel Plating
	SSFRMGF	SSFRMGFS			EN 1.4301 Equiv.	-
	SFRHF	SFRHFS	h7 (Ground)	h7	EN 1.1191 Equiv.	Black Oxide
	PSFRHF	PSFRHFS			EN 1.1191 Equiv.	Electroless Nickel Plating
	SSFRHF	SSFRHFS			EN 1.4301 Equiv.	-
	SFRF	SFRFS	g6 (Ground)	g6	EN 1.1191 Equiv.	Black Oxide
	PSFRF	PSFRFS			EN 1.1191 Equiv.	Electroless Nickel Plating
	SSFRF	SSFRFS			EN 1.4301 Equiv.	-
	PHFRF	-			EN 1.7220 Equiv. Hardness: 30 ~ 35HRC	Electroless Nickel Plating

Specifications

	Part Number	-	L	-	F	-	P	-	N	-	SC
D part h9 / P part h7 h7 (Ground) with Wrench Flat	PSFRMHF30 SFRHFS25	- -	250 200	- -	F30 F25	- -	P10 P15	- -	N10 N12	-	SC30

D tolerance h9 (Cold-drawn) / P tolerance h7 D tolerance h9 (Cold-drawn) / P tolerance g6

Part Number			0.1mm Increment		1mm Increment	N (Coarse) Selection										1mm Increment	W	ℓ₂	(Y)max.
Type		D	L	F	P											SC Wrench Flats Type only
Standard	Wrench Flats	D	L	F	P											SC Wrench Flats Type only
D part h9 / P part h7 SFRMHF PSFRMHF SSFRMHF (D6 is not available for SSFRMHF.) D part h9 / P part g6 SFRMGF PSFRMGF SSFRMGF (D6 is not available for SSFRMGF.)	D part h9 / P part h7 SFRMHFS PSFRMHFS SSFRMHFS (D6 is not available for SSFRMHFS.) D part h9 / P part g6 SFRMGFS PSFRMGFS SSFRMGFS (D6 is not available for SSFRMGFS.)	6	20.0~298.0	2≤F≤Px5	3≤P	3	4									SC+ℓ₂≤L SC=0 or SC≥1 For SC≤Mx3 W-M≥2	5	8	300
		8	20.0~398.0			3	4	5	6								7		400
		10	20.0~498.0				4	5	6								8		500
		12	30.0~598.0		5≤P			5	6	8							10	10	600
		15	30.0~698.0					5	6	8	10						13		700
		20	40.0~798.0					5	6	8	10	12	16				17		800
		25	50.0~798.0		10≤P			5	6	8	10	12	16				22
		30	60.0~798.0		10≤P					8	10	12	16	20			27	15
		35	70.0~798.0		16≤P					8	10	12	16	20	24		30	15

h7 (Ground)

Part Number			0.1mm Increment		1mm Increment	N (Coarse) Selection											1mm Increment	W	ℓ₂	(Y)max.
Type		D	L	F	P												SC Wrench Flats Type only
Standard	Wrench Flats	D	L	F	P												SC Wrench Flats Type only
SFRHF PSFRHF SSFRHF	SFRHFS PSFRHFS SSFRHFS	6	20.0~298.0	2≤F≤Px5	3≤P	3	4										SC+ℓ₂≤L SC=0 or SC≥1 For SC≤Mx3 W-M≥2	5	8	300
		8	20.0~398.0			3	4	5	6									7		400
		10	20.0~498.0				4	5	6									8		500
		12	30.0~598.0		5≤P			5	6	8								10	10	600
		15	30.0~698.0					5	6	8	10							13		700
		17	40.0~798.0					5	6	8	10	12						14		800
		20	40.0~798.0					5	6	8	10	12	16					17
		25	50.0~798.0		10≤P			5	6	8	10	12	16					22
		30	60.0~798.0		10≤P					8	10	12	16	20				27	15
		35	70.0~798.0		16≤P					8	10	12	16	20	24			30	15
		40	80.0~798.0									12	16	20	24	30		36	20
		50	100.0~798.0										16	20	24	30		41	20

g6 (Ground)

Part Number				0.1mm Increment		1mm Increment	N (Coarse) Selection											1mm Increment	W	ℓ₂	(Y)max.
Type		D		L	F	P												SC Wrench Flats Type only
Standard	Wrench Flats	D		L	F	P												SC Wrench Flats Type only
SFRF PSFRF SSFRF (D13, 16, 18 and 22 are not available for SSFRF.) PHFRF (Only marked sizes are available.)	SFRFS PSFRFS SSFRFS (D13, 16, 18 and 22 are not available for SSFRFS.)		6	20.0~298.0	2≤F≤Px5	3≤P	3	4										SC+ℓ₂≤L SC=0 or SC≥1 For SC≤Mx3 W-M≥2	5	8	300
			8	20.0~398.0			3	4	5	6									7		400
			10	20.0~498.0				4	5	6									8		500
			12	30.0~598.0		5≤P			5	6	8								10	10	600
			13	30.0~598.0					5	6	8								11		600
		*	15	30.0~698.0					5	6	8	10							13		700
			16	40.0~798.0					5	6	8	10							14		800
			17	40.0~798.0					5	6	8	10	12						14
			18	40.0~798.0					5	6	8	10	12						15
		*	20	40.0~798.0					5	6	8	10	12	16					17
			22	40.0~798.0		10≤P			5	6	8	10	12	16					19
		*	25	50.0~798.0					5	6	8	10	12	16					22
		*	30	60.0~798.0							8	10	12	16	20				27	15
		*	35	70.0~798.0		16≤P					8	10	12	16	20	24			30	15
		*	40	80.0~798.0									12	16	20	24	30		36	20
		*	50	100.0~798.0										16	20	24	30		41	20

When D-P≤2, chamfer C at the step is 0.2 or less. Overall length requires Nx3≤L.

Alterations

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
SSFRF6-[15-398/0.1]-F[2-25/0.1]-P[3-5/1]-N[2.6,3,4]
SSFRF6-[15-398/0.1]-F[2-25/0.1]-P[3-5/1]-ND[3,4]
SSFRF8-[15-498/0.1]-F[2-35/0.1]-P[3-7/1]-N[2.6,3,4,5,6]
SSFRF8-[15-498/0.1]-F[2-35/0.1]-P[3-7/1]-ND[3,4,5,6]
SSFRF10-[15-598/0.1]-F[2-45/0.1]-P[3-9/1]-N[3,4,5,6]
SSFRF10-[15-598/0.1]-F[2-45/0.1]-P[3-9/1]-ND[3,4,5,6]
SSFRF12-[15-698/0.1]-F[2-55/0.1]-P[5-11/1]-N[4,5,6,8]
SSFRF12-[15-698/0.1]-F[2-55/0.1]-P[5-11/1]-ND[4,5,6,8]
SSFRF15-[15-798/0.1]-F[2-70/0.1]-P[5-14/1]-N[4,5,6,8,10]
SSFRF15-[15-798/0.1]-F[2-70/0.1]-P[5-14/1]-ND[4,5,6,8,10]
SSFRF17-[30-898/0.1]-F[2-80/0.1]-P[5-16/1]-N[4,5,6,8,10,12]
SSFRF17-[30-898/0.1]-F[2-80/0.1]-P[5-16/1]-ND[4,5,6,8,10,12]
SSFRF20-[30-998/0.1]-F[2-95/0.1]-P[5-19/1]-N[4,5,6,8,10,12,16]
SSFRF20-[30-998/0.1]-F[2-95/0.1]-P[5-19/1]-ND[4,5,6,8,10,12,16]
SSFRF25-[50-998/0.1]-F[2-120/0.1]-P[10-24/1]-N[4,5,6,8,10,12,16]
SSFRF25-[50-998/0.1]-F[2-120/0.1]-P[10-24/1]-ND[4,5,6,8,10,12,16]
SSFRF30-[60-998/0.1]-F[2-145/0.1]-P[10-29/1]-N[6,8,10,12,16,20]
SSFRF30-[60-998/0.1]-F[2-145/0.1]-P[10-29/1]-ND[6,8,10,12,16,20]
SSFRF35-[70-998/0.1]-F[2-170/0.1]-P[16-34/1]-N[6,8,10,12,16,20,24]
SSFRF35-[70-998/0.1]-F[2-170/0.1]-P[16-34/1]-ND[6,8,10,12,16,20]
SSFRF40-[80-998/0.1]-F[2-195/0.1]-P[16-39/1]-N[10,12,16,20,24,30]
SSFRF40-[80-998/0.1]-F[2-195/0.1]-P[16-39/1]-ND[10,12,16,20]
SSFRF50-[100-998/0.1]-F[2-245/0.1]-P[16-49/1]-N[12,16,20,24,30]
SSFRF50-[100-998/0.1]-F[2-245/0.1]-P[16-49/1]-ND[12,16,20]
SSFRFS6-[15-398/0.1]-F[2-25/0.1]-P[3-5/1]-N[2.6,3,4]-SC[0-390/1]
SSFRFS6-[15-398/0.1]-F[2-25/0.1]-P[3-5/1]-ND[3,4]-SC[0-390/1]
SSFRFS8-[15-498/0.1]-F[2-35/0.1]-P[3-7/1]-N[2.6,3,4,5,6]-SC[0-490/1]
SSFRFS8-[15-498/0.1]-F[2-35/0.1]-P[3-7/1]-ND[3,4,5,6]-SC[0-490/1]
SSFRFS10-[15-598/0.1]-F[2-45/0.1]-P[3-9/1]-N[3,4,5,6]-SC[0-590/1]
SSFRFS10-[15-598/0.1]-F[2-45/0.1]-P[3-9/1]-ND[3,4,5,6]-SC[0-590/1]
SSFRFS12-[15-698/0.1]-F[2-55/0.1]-P[5-11/1]-N[4,5,6,8]-SC[0-688/1]
SSFRFS12-[15-698/0.1]-F[2-55/0.1]-P[5-11/1]-ND[4,5,6,8]-SC[0-688/1]
SSFRFS15-[15-798/0.1]-F[2-70/0.1]-P[5-14/1]-N[4,5,6,8,10]-SC[0-788/1]
SSFRFS15-[15-798/0.1]-F[2-70/0.1]-P[5-14/1]-ND[4,5,6,8,10]-SC[0-788/1]
SSFRFS17-[30-898/0.1]-F[2-80/0.1]-P[5-16/1]-N[4,5,6,8,10,12]-SC[0-888/1]
SSFRFS17-[30-898/0.1]-F[2-80/0.1]-P[5-16/1]-ND[4,5,6,8,10,12]-SC[0-888/1]
SSFRFS20-[30-998/0.1]-F[2-95/0.1]-P[5-19/1]-N[4,5,6,8,10,12,16]-SC[0-988/1]
SSFRFS20-[30-998/0.1]-F[2-95/0.1]-P[5-19/1]-ND[4,5,6,8,10,12,16]-SC[0-988/1]
SSFRFS25-[50-998/0.1]-F[2-120/0.1]-P[10-24/1]-N[4,5,6,8,10,12,16]-SC[0-988/1]
SSFRFS25-[50-998/0.1]-F[2-120/0.1]-P[10-24/1]-ND[4,5,6,8,10,12,16]-SC[0-988/1]
SSFRFS30-[60-998/0.1]-F[2-145/0.1]-P[10-29/1]-N[6,8,10,12,16,20]-SC[0-983/1]
SSFRFS30-[60-998/0.1]-F[2-145/0.1]-P[10-29/1]-ND[6,8,10,12,16,20]-SC[0-983/1]
SSFRFS35-[70-998/0.1]-F[2-170/0.1]-P[16-34/1]-N[6,8,10,12,16,20,24]-SC[0-983/1]
SSFRFS35-[70-998/0.1]-F[2-170/0.1]-P[16-34/1]-ND[6,8,10,12,16,20]-SC[0-983/1]
SSFRFS40-[80-998/0.1]-F[2-195/0.1]-P[16-39/1]-N[10,12,16,20,24,30]-SC[0-978/1]
SSFRFS40-[80-998/0.1]-F[2-195/0.1]-P[16-39/1]-ND[10,12,16,20]-SC[0-978/1]
SSFRFS50-[100-998/0.1]-F[2-245/0.1]-P[16-49/1]-N[12,16,20,24,30]-SC[0-978/1]
SSFRFS50-[100-998/0.1]-F[2-245/0.1]-P[16-49/1]-ND[12,16,20]-SC[0-978/1]
SSFRHF6-[15-398/0.1]-F[2-25/0.1]-P[3-5/1]-N[2.6,3,4]
SSFRHF6-[15-398/0.1]-F[2-25/0.1]-P[3-5/1]-ND[3,4]
SSFRHF8-[15-498/0.1]-F[2-35/0.1]-P[3-7/1]-N[2.6,3,4,5,6]
SSFRHF8-[15-498/0.1]-F[2-35/0.1]-P[3-7/1]-ND[3,4,5,6]
SSFRHF10-[15-598/0.1]-F[2-45/0.1]-P[3-9/1]-N[3,4,5,6]
SSFRHF10-[15-598/0.1]-F[2-45/0.1]-P[3-9/1]-ND[3,4,5,6]
SSFRHF12-[15-698/0.1]-F[2-55/0.1]-P[5-11/1]-N[4,5,6,8]
SSFRHF12-[15-698/0.1]-F[2-55/0.1]-P[5-11/1]-ND[4,5,6,8]
SSFRHF15-[15-798/0.1]-F[2-70/0.1]-P[5-14/1]-N[4,5,6,8,10]
SSFRHF15-[15-798/0.1]-F[2-70/0.1]-P[5-14/1]-ND[4,5,6,8,10]
SSFRHF17-[30-898/0.1]-F[2-80/0.1]-P[5-16/1]-N[4,5,6,8,10,12]
SSFRHF17-[30-898/0.1]-F[2-80/0.1]-P[5-16/1]-ND[4,5,6,8,10,12]

Standard Unit Price	Minimum order quantity	Standard Shipping Days ?	RoHS	End Shape (Left)	Material	Hardness	Surface Treatment	D Tolerance	Shaft Dia. D (mm)	Length L (mm)	F (mm)	N (mm)	ND	P (mm)	Wrench Flats Machining [SC] (mm)
-	1	4 Days	10	Straight	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	NA	g6 (Ground)	6	15 ～ 398	2 ～ 25	2.6 ～ 4	-	3 ～ 5	-
-	1	4 Days	10	Straight	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	NA	g6 (Ground)	6	15 ～ 398	2 ～ 25	-	3 ～ 4	3 ～ 5	-
-	1	4 Days	10	Straight	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	NA	g6 (Ground)	8	15 ～ 498	2 ～ 35	2.6 ～ 6	-	3 ～ 7	-
-	1	4 Days	10	Straight	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	NA	g6 (Ground)	8	15 ～ 498	2 ～ 35	-	3 ～ 6	3 ～ 7	-
-	1	4 Days	10	Straight	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	NA	g6 (Ground)	10	15 ～ 598	2 ～ 45	3 ～ 6	-	3 ～ 9	-
-	1	4 Days	10	Straight	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	NA	g6 (Ground)	10	15 ～ 598	2 ～ 45	-	3 ～ 6	3 ～ 9	-
-	1	4 Days	10	Straight	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	NA	g6 (Ground)	12	15 ～ 698	2 ～ 55	4 ～ 8	-	5 ～ 11	-
-	1	4 Days	10	Straight	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	NA	g6 (Ground)	12	15 ～ 698	2 ～ 55	-	4 ～ 8	5 ～ 11	-
-	1	4 Days	10	Straight	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	NA	g6 (Ground)	15	15 ～ 798	2 ～ 70	4 ～ 10	-	5 ～ 14	-
-	1	4 Days	10	Straight	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	NA	g6 (Ground)	15	15 ～ 798	2 ～ 70	-	4 ～ 10	5 ～ 14	-
-	1	4 Days	10	Straight	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	NA	g6 (Ground)	17	30 ～ 898	2 ～ 80	4 ～ 12	-	5 ～ 16	-
-	1	4 Days	10	Straight	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	NA	g6 (Ground)	17	30 ～ 898	2 ～ 80	-	4 ～ 12	5 ～ 16	-
-	1	4 Days	10	Straight	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	NA	g6 (Ground)	20	30 ～ 998	2 ～ 95	4 ～ 16	-	5 ～ 19	-
-	1	4 Days	10	Straight	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	NA	g6 (Ground)	20	30 ～ 998	2 ～ 95	-	4 ～ 16	5 ～ 19	-
-	1	4 Days	10	Straight	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	NA	g6 (Ground)	25	50 ～ 998	2 ～ 120	4 ～ 16	-	10 ～ 24	-
-	1	4 Days	10	Straight	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	NA	g6 (Ground)	25	50 ～ 998	2 ～ 120	-	4 ～ 16	10 ～ 24	-
-	1	4 Days	10	Straight	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	NA	g6 (Ground)	30	60 ～ 998	2 ～ 145	6 ～ 16	-	10 ～ 29	-
-	1	4 Days	10	Straight	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	NA	g6 (Ground)	30	60 ～ 998	2 ～ 145	-	6 ～ 16	10 ～ 29	-
-	1	6 Days	10	Straight	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	NA	g6 (Ground)	35	70 ～ 998	2 ～ 170	6 ～ 24	-	16 ～ 34	-
-	1	6 Days	10	Straight	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	NA	g6 (Ground)	35	70 ～ 998	2 ～ 170	-	6 ～ 20	16 ～ 34	-
-	1	6 Days	10	Straight	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	NA	g6 (Ground)	40	80 ～ 998	2 ～ 195	10 ～ 30	-	16 ～ 39	-
-	1	6 Days	10	Straight	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	NA	g6 (Ground)	40	80 ～ 998	2 ～ 195	-	10 ～ 20	16 ～ 39	-
-	1	6 Days	10	Straight	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	NA	g6 (Ground)	50	100 ～ 998	2 ～ 245	12 ～ 30	-	16 ～ 49	-
-	1	6 Days	10	Straight	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	NA	g6 (Ground)	50	100 ～ 998	2 ～ 245	-	12 ～ 20	16 ～ 49	-
-	1	4 Days	10	Straight	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	NA	g6 (Ground)	6	15 ～ 398	2 ～ 25	2.6 ～ 4	-	3 ～ 5	0 ～ 390
-	1	4 Days	10	Straight	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	NA	g6 (Ground)	6	15 ～ 398	2 ～ 25	-	3 ～ 4	3 ～ 5	0 ～ 390
-	1	4 Days	10	Straight	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	NA	g6 (Ground)	8	15 ～ 498	2 ～ 35	2.6 ～ 6	-	3 ～ 7	0 ～ 490
-	1	4 Days	10	Straight	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	NA	g6 (Ground)	8	15 ～ 498	2 ～ 35	-	3 ～ 6	3 ～ 7	0 ～ 490
-	1	4 Days	10	Straight	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	NA	g6 (Ground)	10	15 ～ 598	2 ～ 45	3 ～ 6	-	3 ～ 9	0 ～ 590
-	1	4 Days	10	Straight	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	NA	g6 (Ground)	10	15 ～ 598	2 ～ 45	-	3 ～ 6	3 ～ 9	0 ～ 590
-	1	4 Days	10	Straight	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	NA	g6 (Ground)	12	15 ～ 698	2 ～ 55	4 ～ 8	-	5 ～ 11	0 ～ 688
-	1	4 Days	10	Straight	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	NA	g6 (Ground)	12	15 ～ 698	2 ～ 55	-	4 ～ 8	5 ～ 11	0 ～ 688
-	1	4 Days	10	Straight	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	NA	g6 (Ground)	15	15 ～ 798	2 ～ 70	4 ～ 10	-	5 ～ 14	0 ～ 788
-	1	4 Days	10	Straight	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	NA	g6 (Ground)	15	15 ～ 798	2 ～ 70	-	4 ～ 10	5 ～ 14	0 ～ 788
-	1	4 Days	10	Straight	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	NA	g6 (Ground)	17	30 ～ 898	2 ～ 80	4 ～ 12	-	5 ～ 16	0 ～ 888
-	1	4 Days	10	Straight	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	NA	g6 (Ground)	17	30 ～ 898	2 ～ 80	-	4 ～ 12	5 ～ 16	0 ～ 888
-	1	4 Days	10	Straight	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	NA	g6 (Ground)	20	30 ～ 998	2 ～ 95	4 ～ 16	-	5 ～ 19	0 ～ 988
-	1	4 Days	10	Straight	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	NA	g6 (Ground)	20	30 ～ 998	2 ～ 95	-	4 ～ 16	5 ～ 19	0 ～ 988
-	1	4 Days	10	Straight	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	NA	g6 (Ground)	25	50 ～ 998	2 ～ 120	4 ～ 16	-	10 ～ 24	0 ～ 988
-	1	4 Days	10	Straight	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	NA	g6 (Ground)	25	50 ～ 998	2 ～ 120	-	4 ～ 16	10 ～ 24	0 ～ 988
-	1	4 Days	10	Straight	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	NA	g6 (Ground)	30	60 ～ 998	2 ～ 145	6 ～ 16	-	10 ～ 29	0 ～ 983
-	1	4 Days	10	Straight	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	NA	g6 (Ground)	30	60 ～ 998	2 ～ 145	-	6 ～ 16	10 ～ 29	0 ～ 983
-	1	9 Days	10	Straight	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	NA	g6 (Ground)	35	70 ～ 998	2 ～ 170	6 ～ 24	-	16 ～ 34	0 ～ 983
-	1	9 Days	10	Straight	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	NA	g6 (Ground)	35	70 ～ 998	2 ～ 170	-	6 ～ 20	16 ～ 34	0 ～ 983
-	1	9 Days	10	Straight	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	NA	g6 (Ground)	40	80 ～ 998	2 ～ 195	10 ～ 30	-	16 ～ 39	0 ～ 978
-	1	9 Days	10	Straight	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	NA	g6 (Ground)	40	80 ～ 998	2 ～ 195	-	10 ～ 20	16 ～ 39	0 ～ 978
-	1	9 Days	10	Straight	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	NA	g6 (Ground)	50	100 ～ 998	2 ～ 245	12 ～ 30	-	16 ～ 49	0 ～ 978
-	1	9 Days	10	Straight	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	NA	g6 (Ground)	50	100 ～ 998	2 ～ 245	-	12 ～ 20	16 ～ 49	0 ～ 978
-	1	4 Days	10	Straight	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	NA	h7 (Ground)	6	15 ～ 398	2 ～ 25	2.6 ～ 4	-	3 ～ 5	-
-	1	4 Days	10	Straight	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	NA	h7 (Ground)	6	15 ～ 398	2 ～ 25	-	3 ～ 4	3 ～ 5	-
-	1	4 Days	10	Straight	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	NA	h7 (Ground)	8	15 ～ 498	2 ～ 35	2.6 ～ 6	-	3 ～ 7	-
-	1	4 Days	10	Straight	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	NA	h7 (Ground)	8	15 ～ 498	2 ～ 35	-	3 ～ 6	3 ～ 7	-
-	1	4 Days	10	Straight	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	NA	h7 (Ground)	10	15 ～ 598	2 ～ 45	3 ～ 6	-	3 ～ 9	-
-	1	4 Days	10	Straight	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	NA	h7 (Ground)	10	15 ～ 598	2 ～ 45	-	3 ～ 6	3 ～ 9	-
-	1	4 Days	10	Straight	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	NA	h7 (Ground)	12	15 ～ 698	2 ～ 55	4 ～ 8	-	5 ～ 11	-
-	1	4 Days	10	Straight	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	NA	h7 (Ground)	12	15 ～ 698	2 ～ 55	-	4 ～ 8	5 ～ 11	-
-	1	4 Days	10	Straight	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	NA	h7 (Ground)	15	15 ～ 798	2 ～ 70	4 ～ 10	-	5 ～ 14	-
-	1	4 Days	10	Straight	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	NA	h7 (Ground)	15	15 ～ 798	2 ～ 70	-	4 ～ 10	5 ～ 14	-
-	1	6 Days	10	Straight	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	NA	h7 (Ground)	17	30 ～ 898	2 ～ 80	4 ～ 12	-	5 ～ 16	-
-	1	6 Days	10	Straight	[Stainless Steel] EN 1.4301 Equiv.	No Hardened	NA	h7 (Ground)	17	30 ～ 898	2 ～ 80	-	4 ～ 12	5 ～ 16	-

Example of Use

Products homepage

Basic information

Basic Shape	One End Stepped	End Shape (Right)	Tapped	Keyway	Keyway Option (Alteration)

Configure

160Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

End Shape (Left)
- Straight
- Threads
Clear
Material
- Steel
  - EN 1.1191 Equiv.
  - EN 1.7220 Equiv.
- Stainless Steel
  - EN 1.4301 Equiv.
Clear
Hardness
- No Hardened
- Hardened
Clear
D Tolerance
- h9 (Cold-drawn)
- h7 (Ground)
- g6 (Ground)
Clear
Shaft Dia. D(mm)
6

8

10

12

13

15

16

17

18

20

22

25

30

35

40

50
Clear
Length L(mm)
[15-998/0.1mm Unit(s)]
Clear
F(mm)
[2-245/0.1mm Unit(s)]
Clear
N(mm)
2.6

3

4

5

6

8

10

12

16

20

24

30
Clear
ND
3

4

5

6

8

10

12

16

20
Clear
P(mm)
[3-49/1mm Unit(s)]
Clear
Wrench Flats Machining [SC](mm)
[0-988/1mm Unit(s)]
Clear
Type
- PHFRF
- PSFRF
- PSFRFS
- PSFRHF
- PSFRHFS
- PSFRMGF
- PSFRMGFS
- PSFRMHF
- PSFRMHFS
- SFRF
- SFRFS
- SFRHF
- SFRHFS
- SFRMGF
- SFRMGFS
- SFRMHF
- SFRMHFS
- SSFRF
- SSFRFS
- SSFRHF
- SSFRHFS
- SSFRMGF
- SSFRMGFS
- SSFRMHF
- SSFRMHFS
Clear
Surface Treatment
- NA
- Surface Treatment Provided
  - Black Oxide
  - Electroless Nickel Plating
Clear
Filter by CAD data type
- 2D
- 3D
Clear