Linear shafts / stepped on one side / two-sided internal thread / stepped on one side / internal thread (Part Numbers - CAD Download)

Click on this image to zoom in.

View the FAQ (10)

MISUMI

Order quantities extended (D-JIT)

(i)Remark

SFAA has been localized according to European needs and requirements. Please have a look on the EU version SFAAEU. SFAAEU is available in EN 1.1213 (Cf53) and h6 / h7.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
More Information
Catalog
Technical Information

Back to Linear Shaft Category

Technical Drawing - Linear Shafts

One End Stepped/Both Ends Tapped/One End Stepped/One End Tapped:Related Image

Basic Properties (e.g. material, hardness, coating, tolerance) - Linear Shafts

Type						Material	Hardness	Surface Treatment
One End Stepped, Both Ends Tapped			One End Stepped, One End Tapped
D Tol. g6	D Tol. h5	D Tol. f8	D Tol. g6	D Tol. h5	D Tol. f8
SFAA	SFUE	-	SFNA	SFEU	-	EN 1.3505 Equiv.	Effective Hardened Depth of Induction Hardening >>P.112 EN 1.3505 Equiv. 58HRC~ EN 1.4037 Equiv. 56HRC~	-
SSFAA	SSFUE	-	SSFNA	SSFEU	-	EN 1.4037 Equiv.		-
PSFAA	PSFUE	-	PSFNA	PSFEU	-	EN 1.3505 Equiv.		Hard Chrome Plating Plating Hardness: HV750 ~ Plating Thickness: 5µ or More ~
PSSFAA	PSSFUE	-	PSSFNA	PSSFEU	-	EN 1.4037 Equiv.
RSFAA	-	-	RSFNA	-	-	EN 1.3505 Equiv.		LTBC Plating
-	-	PSFGA	-	-	PSNGA	EN 1.1191 Equiv.	-	Hard Chrome Plating Plating Hardness: HV750 ~ Plating Thickness: 10µ or More ~
-	-	PSSFGA	-	-	PSSNGA	EN 1.4301 Equiv.	-

Further specifications can be found under the tab More Information.

Composition of a Product Code - Linear Shafts

Part Number	-	L	-	F	-	P	-	M	-	N
SFAA20 SFUE20 SFNA20	- - -	400 400 400	- - -	F25 F25 F25	- - -	P16 P16 P15	- -	M10 M10	- - -	N10 N10 N10

Alterations - Linear Shafts

One End Stepped/Both Ends Tapped/One End Stepped/One End Tapped:Related Image

You find further options in detail under Option Overview.

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
SFEU8-[25-998/1]-F[2-24/1]-P6-N[3,4,5]
SFEU10-[25-998/1]-F[2-32/1]-P[6-8/1]-N[3,4,5,6]
SFEU12-[25-1198/1]-F[2-40/1]-P[6-10/1]-N[4,5,6,8]
SFEU12-[25-1198/1]-F[2-40/1]-P[6-10/1]-ND6
SFEU12-[25-1198/1]-F[2-40/1]-P[6-10/1]-NSC8
SFEU13-[25-1198/1]-F[2-44/1]-P[6-11/1]-N[4,5,6,8]
SFEU13-[25-1198/1]-F[2-44/1]-P[6-11/1]-ND[6,8]
SFEU13-[25-1198/1]-F[2-44/1]-P[6-11/1]-NSC8
SFEU15-[25-1198/1]-F[2-52/1]-P[6-13/1]-N[4,5,6,8]
SFEU15-[25-1198/1]-F[2-52/1]-P[6-13/1]-ND[6,8,10]
SFEU15-[25-1198/1]-F[2-52/1]-P[6-13/1]-NSC[8,10]
SFEU16-[25-1198/1]-F[2-56/1]-P[6-14/1]-N[4,5,6,8]
SFEU16-[25-1198/1]-F[2-56/1]-P[6-14/1]-ND[6,8,10]
SFEU16-[25-1198/1]-F[2-56/1]-P[6-14/1]-NSC[8,10]
SFEU18-[25-1398/1]-F[2-60/1]-P[5-16/1]-N[4,5,6,8,10,12]
SFEU18-[25-1398/1]-F[2-60/1]-P[5-16/1]-ND[6,8,10,12]
SFEU18-[25-1398/1]-F[2-60/1]-P[5-16/1]-NSC[8,10,12]
SFEU20-[25-1198/1]-F[2-68/1]-P[8-17/1]-N[4,5,6,8]
SFEU20-[25-1198/1]-F[2-68/1]-P[8-17/1]-ND[6,8,10,12]
SFEU20-[25-1198/1]-F[2-68/1]-P[8-17/1]-NSC[8,10,12,14]
SFEU25-[25-1198/1]-F[2-88/1]-P[8-22/1]-N[4,5,6,8,10,12,16]
SFEU25-[25-1198/1]-F[2-88/1]-P[8-22/1]-ND[6,8,10,12,16]
SFEU25-[25-1198/1]-F[2-88/1]-P[8-22/1]-NSC[8,10,12,14,18]
SFEU30-[25-1498/1]-F[2-108/1]-P[9-27/1]-N[6,8,10,12,16,20]
SFEU30-[25-1498/1]-F[2-108/1]-P[9-27/1]-ND[6,8,10,12,16,20]
SFEU30-[25-1498/1]-F[2-108/1]-P[9-27/1]-NSC[8,10,12,14,18]
SFEU35-[25-1498/1]-F[2-128/1]-P[9-32/1]-N[8,10,12,16,20,24]
SFEU35-[25-1498/1]-F[2-128/1]-P[9-32/1]-NSC[8,10,12,14,18]
SFEU40-[25-1498/1]-F[2-148/1]-P[11-37/1]-N[10,12,16,20,24,30]
SFEU40-[25-1498/1]-F[2-148/1]-P[11-37/1]-NSC[10,12,14,18]
SFEU50-[25-1498/1]-F[2-188/1]-P[11-47/1]-N[12,16,20,24,30]
SFEU50-[25-1498/1]-F[2-188/1]-P[11-47/1]-NSC[12,14,18]
SFNA8-[25-998/1]-F[2-24/1]-P6-N[3,4,5]
SFNA10-[25-998/1]-F[2-32/1]-P[6-8/1]-N[3,4,5,6]
SFNA12-[25-1198/1]-F[2-40/1]-P[6-10/1]-N[4,5,6,8]
SFNA12-[25-1198/1]-F[2-40/1]-P[6-10/1]-ND6
SFNA12-[25-1198/1]-F[2-40/1]-P[6-10/1]-NSC8
SFNA13-[25-1198/1]-F[2-44/1]-P[6-11/1]-N[4,5,6,8]
SFNA13-[25-1198/1]-F[2-44/1]-P[6-11/1]-ND[6,8]
SFNA13-[25-1198/1]-F[2-44/1]-P[6-11/1]-NSC8
SFNA15-[25-1198/1]-F[2-52/1]-P[6-13/1]-N[4,5,6,8]
SFNA15-[25-1198/1]-F[2-52/1]-P[6-13/1]-ND[6,8,10]
SFNA15-[25-1198/1]-F[2-52/1]-P[6-13/1]-NSC[8,10]
SFNA16-[25-1198/1]-F[2-56/1]-P[6-14/1]-N[4,5,6,8]
SFNA16-[25-1198/1]-F[2-56/1]-P[6-14/1]-ND[6,8,10]
SFNA16-[25-1198/1]-F[2-56/1]-P[6-14/1]-NSC[8,10]
SFNA18-[25-1198/1]-F[2-60/1]-P[6-16/1]-N[4,5,6,8,10,12]
SFNA18-[25-1198/1]-F[2-60/1]-P[6-16/1]-ND[6,8,10,12]
SFNA18-[25-1198/1]-F[2-60/1]-P[6-16/1]-NSC[8,10,12]
SFNA20-[25-1198/1]-F[2-68/1]-P[8-17/1]-N[4,5,6,8]
SFNA20-[25-1198/1]-F[2-68/1]-P[8-17/1]-ND[6,8,10,12]
SFNA20-[25-1198/1]-F[2-68/1]-P[8-17/1]-NSC[8,10,12,14]
SFNA25-[25-1198/1]-F[2-88/1]-P[8-22/1]-N[4,5,6,8,10,12,16]
SFNA25-[25-1198/1]-F[2-88/1]-P[8-22/1]-ND[6,8,10,12,16]
SFNA25-[25-1198/1]-F[2-88/1]-P[8-22/1]-NSC[8,10,12,14,18]
SFNA30-[25-1498/1]-F[2-108/1]-P[9-27/1]-N[6,8,10,12,16,20]
SFNA30-[25-1498/1]-F[2-108/1]-P[9-27/1]-ND[6,8,10,12,16,20]
SFNA30-[25-1498/1]-F[2-108/1]-P[9-27/1]-NSC[8,10,12,14,18]
SFNA35-[25-1498/1]-F[2-128/1]-P[9-32/1]-N[8,10,12,16,20,24]
SFNA35-[25-1498/1]-F[2-128/1]-P[9-32/1]-NSC[8,10,12,14,18]

Standard Unit Price	Minimum order quantity	Standard Shipping Days ?	RoHS	Shaft end Shape (Left)	[D] Diameter (Shaft) (mm)	[L] Length (Shaft) (mm)	Material	Heat Treatment	Surface Treatment	ISO Tolerance	Hardness	[NSC] Size (fine thread - depth 2xN) (mm)	[ND] Size (thread - depth 3xN) (mm)	[MD] Size (thread - depth 3xM) (mm)	[F] Length (stud - offset - front side) (mm)	[P] Diameter (stepped - front side) (mm)	[N] Size (thread - depth 2xN) (mm)	[M] Size (thread - depth 2xM) (mm)
-	1	4 Days	10	Straight	8	25 ～ 998	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	h5	Induction Hardening (58HRC~)	-	-	-	2 ～ 24	6	3 ～ 5	-
-	1	4 Days	10	Straight	10	25 ～ 998	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	h5	Induction Hardening (58HRC~)	-	-	-	2 ～ 32	6 ～ 8	3 ～ 6	-
-	1	4 Days	10	Straight	12	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	h5	Induction Hardening (58HRC~)	-	-	-	2 ～ 40	6 ～ 10	4 ～ 8	-
-	1	4 Days	10	Straight	12	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	h5	Induction Hardening (58HRC~)	-	6	-	2 ～ 40	6 ～ 10	-	-
-	1	4 Days	10	Straight	12	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	h5	Induction Hardening (58HRC~)	8	-	-	2 ～ 40	6 ～ 10	-	-
-	1	4 Days	10	Straight	13	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	h5	Induction Hardening (58HRC~)	-	-	-	2 ～ 44	6 ～ 11	4 ～ 8	-
-	1	4 Days	10	Straight	13	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	h5	Induction Hardening (58HRC~)	-	6 ～ 8	-	2 ～ 44	6 ～ 11	-	-
-	1	4 Days	10	Straight	13	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	h5	Induction Hardening (58HRC~)	8	-	-	2 ～ 44	6 ～ 11	-	-
-	1	4 Days	10	Straight	15	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	h5	Induction Hardening (58HRC~)	-	-	-	2 ～ 52	6 ～ 13	4 ～ 8	-
-	1	4 Days	10	Straight	15	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	h5	Induction Hardening (58HRC~)	-	6 ～ 10	-	2 ～ 52	6 ～ 13	-	-
-	1	4 Days	10	Straight	15	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	h5	Induction Hardening (58HRC~)	8 ～ 10	-	-	2 ～ 52	6 ～ 13	-	-
-	1	4 Days	10	Straight	16	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	h5	Induction Hardening (58HRC~)	-	-	-	2 ～ 56	6 ～ 14	4 ～ 8	-
-	1	4 Days	10	Straight	16	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	h5	Induction Hardening (58HRC~)	-	6 ～ 10	-	2 ～ 56	6 ～ 14	-	-
-	1	4 Days	10	Straight	16	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	h5	Induction Hardening (58HRC~)	8 ～ 10	-	-	2 ～ 56	6 ～ 14	-	-
-	1	7 Days	10	Straight	18	25 ～ 1398	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	h5	Induction Hardening (58HRC~)	-	-	-	2 ～ 60	5 ～ 16	4 ～ 12	-
-	1	7 Days	10	Straight	18	25 ～ 1398	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	h5	Induction Hardening (58HRC~)	-	6 ～ 12	-	2 ～ 60	5 ～ 16	-	-
-	1	7 Days	10	Straight	18	25 ～ 1398	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	h5	Induction Hardening (58HRC~)	8 ～ 12	-	-	2 ～ 60	5 ～ 16	-	-
-	1	4 Days	10	Straight	20	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	h5	Induction Hardening (58HRC~)	-	-	-	2 ～ 68	8 ～ 17	4 ～ 8	-
-	1	4 Days	10	Straight	20	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	h5	Induction Hardening (58HRC~)	-	6 ～ 12	-	2 ～ 68	8 ～ 17	-	-
-	1	4 Days	10	Straight	20	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	h5	Induction Hardening (58HRC~)	8 ～ 14	-	-	2 ～ 68	8 ～ 17	-	-
-	1	4 Days	10	Straight	25	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	h5	Induction Hardening (58HRC~)	-	-	-	2 ～ 88	8 ～ 22	4 ～ 16	-
-	1	4 Days	10	Straight	25	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	h5	Induction Hardening (58HRC~)	-	6 ～ 16	-	2 ～ 88	8 ～ 22	-	-
-	1	4 Days	10	Straight	25	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	h5	Induction Hardening (58HRC~)	8 ～ 18	-	-	2 ～ 88	8 ～ 22	-	-
-	1	4 Days	10	Straight	30	25 ～ 1498	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	h5	Induction Hardening (58HRC~)	-	-	-	2 ～ 108	9 ～ 27	6 ～ 20	-
-	1	4 Days	10	Straight	30	25 ～ 1498	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	h5	Induction Hardening (58HRC~)	-	6 ～ 20	-	2 ～ 108	9 ～ 27	-	-
-	1	4 Days	10	Straight	30	25 ～ 1498	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	h5	Induction Hardening (58HRC~)	8 ～ 18	-	-	2 ～ 108	9 ～ 27	-	-
-	1	7 Days	10	Straight	35	25 ～ 1498	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	h5	Induction Hardening (58HRC~)	-	-	-	2 ～ 128	9 ～ 32	8 ～ 24	-
-	1	7 Days	10	Straight	35	25 ～ 1498	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	h5	Induction Hardening (58HRC~)	8 ～ 18	-	-	2 ～ 128	9 ～ 32	-	-
-	1	7 Days	10	Straight	40	25 ～ 1498	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	h5	Induction Hardening (58HRC~)	-	-	-	2 ～ 148	11 ～ 37	10 ～ 30	-
-	1	7 Days	10	Straight	40	25 ～ 1498	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	h5	Induction Hardening (58HRC~)	10 ～ 18	-	-	2 ～ 148	11 ～ 37	-	-
-	1	7 Days	10	Straight	50	25 ～ 1498	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	h5	Induction Hardening (58HRC~)	-	-	-	2 ～ 188	11 ～ 47	12 ～ 30	-
-	1	7 Days	10	Straight	50	25 ～ 1498	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	h5	Induction Hardening (58HRC~)	12 ～ 18	-	-	2 ～ 188	11 ～ 47	-	-
-	1	4 Days	10	Straight	8	25 ～ 998	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	g6	Induction Hardening (58HRC~)	-	-	-	2 ～ 24	6	3 ～ 5	-
-	1	4 Days	10	Straight	10	25 ～ 998	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	g6	Induction Hardening (58HRC~)	-	-	-	2 ～ 32	6 ～ 8	3 ～ 6	-
-	1	4 Days	10	Straight	12	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	g6	Induction Hardening (58HRC~)	-	-	-	2 ～ 40	6 ～ 10	4 ～ 8	-
-	1	4 Days	10	Straight	12	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	g6	Induction Hardening (58HRC~)	-	6	-	2 ～ 40	6 ～ 10	-	-
-	1	4 Days	10	Straight	12	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	g6	Induction Hardening (58HRC~)	8	-	-	2 ～ 40	6 ～ 10	-	-
-	1	4 Days	10	Straight	13	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	g6	Induction Hardening (58HRC~)	-	-	-	2 ～ 44	6 ～ 11	4 ～ 8	-
-	1	4 Days	10	Straight	13	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	g6	Induction Hardening (58HRC~)	-	6 ～ 8	-	2 ～ 44	6 ～ 11	-	-
-	1	4 Days	10	Straight	13	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	g6	Induction Hardening (58HRC~)	8	-	-	2 ～ 44	6 ～ 11	-	-
-	1	4 Days	10	Straight	15	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	g6	Induction Hardening (58HRC~)	-	-	-	2 ～ 52	6 ～ 13	4 ～ 8	-
-	1	4 Days	10	Straight	15	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	g6	Induction Hardening (58HRC~)	-	6 ～ 10	-	2 ～ 52	6 ～ 13	-	-
-	1	4 Days	10	Straight	15	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	g6	Induction Hardening (58HRC~)	8 ～ 10	-	-	2 ～ 52	6 ～ 13	-	-
-	1	4 Days	10	Straight	16	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	g6	Induction Hardening (58HRC~)	-	-	-	2 ～ 56	6 ～ 14	4 ～ 8	-
-	1	4 Days	10	Straight	16	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	g6	Induction Hardening (58HRC~)	-	6 ～ 10	-	2 ～ 56	6 ～ 14	-	-
-	1	4 Days	10	Straight	16	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	g6	Induction Hardening (58HRC~)	8 ～ 10	-	-	2 ～ 56	6 ～ 14	-	-
-	1	8 Days	10	Straight	18	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	g6	Induction Hardening (58HRC~)	-	-	-	2 ～ 60	6 ～ 16	4 ～ 12	-
-	1	8 Days	10	Straight	18	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	g6	Induction Hardening (58HRC~)	-	6 ～ 12	-	2 ～ 60	6 ～ 16	-	-
-	1	8 Days	10	Straight	18	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	g6	Induction Hardening (58HRC~)	8 ～ 12	-	-	2 ～ 60	6 ～ 16	-	-
-	1	4 Days	10	Straight	20	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	g6	Induction Hardening (58HRC~)	-	-	-	2 ～ 68	8 ～ 17	4 ～ 8	-
-	1	4 Days	10	Straight	20	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	g6	Induction Hardening (58HRC~)	-	6 ～ 12	-	2 ～ 68	8 ～ 17	-	-
-	1	4 Days	10	Straight	20	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	g6	Induction Hardening (58HRC~)	8 ～ 14	-	-	2 ～ 68	8 ～ 17	-	-
-	1	4 Days	10	Straight	25	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	g6	Induction Hardening (58HRC~)	-	-	-	2 ～ 88	8 ～ 22	4 ～ 16	-
-	1	4 Days	10	Straight	25	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	g6	Induction Hardening (58HRC~)	-	6 ～ 16	-	2 ～ 88	8 ～ 22	-	-
-	1	4 Days	10	Straight	25	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	g6	Induction Hardening (58HRC~)	8 ～ 18	-	-	2 ～ 88	8 ～ 22	-	-
-	1	4 Days	10	Straight	30	25 ～ 1498	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	g6	Induction Hardening (58HRC~)	-	-	-	2 ～ 108	9 ～ 27	6 ～ 20	-
-	1	4 Days	10	Straight	30	25 ～ 1498	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	g6	Induction Hardening (58HRC~)	-	6 ～ 20	-	2 ～ 108	9 ～ 27	-	-
-	1	4 Days	10	Straight	30	25 ～ 1498	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	g6	Induction Hardening (58HRC~)	8 ～ 18	-	-	2 ～ 108	9 ～ 27	-	-
-	1	8 Days	10	Straight	35	25 ～ 1498	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	g6	Induction Hardening (58HRC~)	-	-	-	2 ～ 128	9 ～ 32	8 ～ 24	-
-	1	8 Days	10	Straight	35	25 ～ 1498	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	g6	Induction Hardening (58HRC~)	8 ～ 18	-	-	2 ～ 128	9 ～ 32	-	-

Back to Linear Shaft Category

Technical Drawing - Linear Shafts

Specification Tables - Linear Shafts

D Tol.
D	g6	h5	f8
8	-0.005 -0.014	0 -0.006	-0.013 -0.035
10
12	-0.006 -0.017	0 -0.008	-0.016 -0.043
13
15
16
18
20	-0.007 -0.020	0 -0.009	-0.020 -0.053
25
30
35	-0.009 -0.025	0 -0.011	-0.025 -0.064
40
50

Part Number					1mm Increment			M (Coarse) Selection											N (Coarse) Selection											(Y)Max.	R	C
Type				D	L	F	P	M (Coarse) Selection											N (Coarse) Selection											(Y)Max.	R	C
One End Stepped, Both Ends Tapped (D Tolerance g6) SFAA SSFAA PSFAA PSSFAA RSFAA (D≤30, L≤500) (D Tolerance f8) PSFGA PSSFGA	(D Tolerance h5) SFUE SSFUE PSFUE PSSFUE	One End Stepped One End Tapped (D Tolerance g6) SFNA SSFNA PSFNA PSSFNA RSFNA (D≤30, L≤500) (D Tolerance f8) PSNGA PSSNGA	(D Tolerance h5) SFEU SSFEU PSFEU PSSFEU	8	25~798	2≤F≤Px4	6	3											3	4	5									800	0.3 or Less	0.5 or Less
				10	25~798		6~ 8	3	4	5									3	4	5	6								800
				12	25~998		6~10	3	4	5	6									4	5	6	8							1000
				13	25~998		6~11	3	4	5	6	8								4	5	6	8							1000
				15	25~998		6~13	3	4	5	6	8	10							4	5	6	8	10						1000
				16	25~1198		6~14	3	4	5	6	8	10							4	5	6	8	10						1200
				18	25~1198		8~16		4	5	6	8	10	12						4	5	6	8	10	12					1200
				20	25~1198		8~17		4	5	6	8	10	12						4	5	6	8	10	12					1200		1.0 or Less
				25	25~1198		8~22		4	5	6	8	10	12	16					4	5	6	8	10	12	16				1200
				30	25~1498		9~27			5	6	8	10	12	16	20	24					6	8	10	12	16	20			1500
				35	25~1498		9~32			5	6	8	10	12	16	20	24						8	10	12	16	20	24		1500	0.5 or Less
				40	25~1498		11~37				6	8	10	12	16	20	24	30						10	12	16	20	24	30	1500
				50	25~1498		11~47				6	8	10	12	16	20	24	30							12	16	20	24	30	1500

P dimensions require M+3≤P. When D-P≤4, stepped section chamfer C is 0.2 or less. For One End Stepped One End Tapped Type, L dimensions require Nx3≤L.
When Mx2.5+4+Nx2.5+4≥(Y), tap pilot holes may go through. When Mx2+Nx2≥(Y), effective depth of larger diameter tap has priority.

Alterations - Linear Shafts

One End Stepped/Both Ends Tapped/One End Stepped/One End Tapped:Related Image

You find further options in detail under Option Overview.

Products homepage

Basic information

Basic Shape	Solid, One End Stepped	Shaft end Shape (Right)	Internal thread	Shaft end Perpendicularity	0.2

Configure

956Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Shaft end Shape (Left)
- Straight
- Internal thread
Clear
[D] Diameter (Shaft)(mm)
8

10

12

13

15

16

18

20

25

30

35

40

50
Clear
[L] Length (Shaft)(mm)
[25-1498/1mm Unit(s)]
Clear
Material
- Unalloyed Steel
  - EN 1.1191 Equiv.
- Stainless Steel (austenitic)
  - EN 1.4301 Equiv.
- Alloyed Steel
  - EN 1.3505 Equiv.
- Stainless Steel (martensitique)
  - EN 1.4037 Equiv.
Clear
Heat Treatment
- No Treatment
- Induction Hardened
Clear
Surface Treatment
- No Treatment
- Hard Chrome Plating
- LTBC Plating
Clear
ISO Tolerance
f8

g6

h5
Clear
Hardness
- Induction Hardening (56HRC~)
- Induction Hardening (58HRC~)
- No Induction Hardening
Clear
[NSC] Size (fine thread - depth 2xN)(mm)
8

10

12

14

18
Clear
[ND] Size (thread - depth 3xN)(mm)
6

8

10

12

16

20
Clear
[MD] Size (thread - depth 3xM)(mm)
6

8

10

12

16

20
Clear
[F] Length (stud - offset - front side)(mm)
[2-188/1mm Unit(s)]
Clear
[P] Diameter (stepped - front side)(mm)
6
[3-47/1mm Unit(s)]
Clear
[N] Size (thread - depth 2xN)(mm)
3

4

5

6

8

10

12

16

20

24

30
Clear
[M] Size (thread - depth 2xM)(mm)
3

4

5

6

8

10

12

16

20

24

30
Clear
Type
- PSFAA
- PSFEU
- PSFGA
- PSFNA
- PSFUE
- PSNGA
- PSSFAA
- PSSFEU
- PSSFGA
- PSSFNA
- PSSFUE
- PSSNGA
- RSFAA
- RSFNA
- SFAA
- SFEU
- SFNA
- SFUE
- SSFAA
- SSFEU
- SSFNA
- SSFUE
Clear
Filter by CAD data type
- 2D
- 3D
Clear

Filter by standard shipping days

All

4 Days or Less

6 Days or Less

7 Days or Less

8 Days or Less

14 Days or Less
Reset

Optional Attributes

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently Asked Questions (FAQ)

Question:
What is the difference between a hollow shaft and a solid shaft?: Answer:
With the same size, there are three differences between a hollow shaft and a solid shaft. Hollow shafts weigh less. The inner cavity of a hollow shaft is suitable for use as a channel (cable channel). Solid shafts are a bit more rigid (higher resistance torque).
Question:
What is the minimum order of linear shafts from MISUMI?: Answer:
MISUMI supplies solid shafts, hollow shafts and precision shafts starting at a lot size of 1. This also applies to all other items in our product range.
Question:
Noises and vibrations occur with a linear shaft. In addition, there are jerky movements. What could cause this?: Answer:
In general, it may be caused if the steel shaft is not properly lubricated. In addition, an incorrectly selected diameter tolerance of the linear shafts may also make the cycle of motion more difficult. When using MISUMI linear ball bearings, a g6 shaft tolerance is recommended (tolerance recommendations may vary depending on the manufacturer).
Question:
What is the strength of a solid shaft?: Answer:
The strength of a linear shaft, although it is a solid shaft, hollow shaft or precision shaft, should always be selected in consideration of the strength of the material used.
Question:
What are the advantages of a hollow shaft over a solid shaft?: Answer:
There are various advantages of a hollow shaft compared to a solid shaft. If the outer diameter is the same, the weight of a hollow shaft is lower than that of a solid shaft. However, the cavity of the hollow shaft can also be used as a cable channel or for cooling. A hollow shaft is at the same weight or with the same cross-sectional area more rigid than a solid shaft, because the outer diameter is larger. However, the question that needs to be answered is whether the advantage is a greater room utilization or less weight.
Question:
Is a hollow shaft stiffer than a solid shaft?: Answer:
The rigidity of a hollow shaft is slightly lower with the same outer diameter than that of a solid shaft. However, with the same cross-sectional area or with the same weight, the stiffness of a hollow shaft is higher than that of a solid shaft, because the outer diameter of the hollow shaft is larger.
Question:
Why do I have running grooves on the linear shafts of my 3D printers?: Answer:
The running grooves on the linear shaft may have been created, for example, by using a linear ball bearing. To prevent grooves from forming on a steel shaft, it should be hardened and hard chromium plated, making it more durable and resistant to the wear and tear from ball bearings.
Question:
How do the flexure properties of hollow shafts and solid shafts differ?: Answer:
With an equally large outer diameter, a solid shaft has better flexure properties than an equally large hollow shaft. However, the solid shaft is not much stiffer than a hollow shaft with the same outer diameter, since the outer sections mainly carry the load. Hollow shafts with the same cross-sectional area are more rigid than solid shafts, because they have a larger outer diameter. Therefore, there is physically more material in the outer sections for the bending, which bears the loads.
Question:
I need a lacquered or matted shaft because reflections cause problems with the optics. Does MISUMI have something like that?: Answer:
MISUMI LTBC-coated linear shafts are an alternative to painted or matted steel shafts. The LTBC coating is low-reflection and has the same effect as painted and matte shafts. In addition, LTBC-coated linear shafts are more resistant to wear and tear and flaking. You can find further information on LTBC coating here .
Question:
It has been shown that a hollow shaft is stronger than a solid shaft made of the same material. Why?: Answer:
A hollow shaft with the same outer dimensions is principally not stronger than a solid shaft. However, a hollow shaft per weight unit is stronger.