Linear shafts / offset on one side / internal thread (Part Numbers - CAD Download)

Click on this image to zoom in.

View the FAQ (10)

MISUMI

Order quantities extended (D-JIT)

(i)Remark

SFAC has been localized according to European needs and requirements. Please have a look on the EU version SFACEU. SFACEU is available in EN 1.1213 (Cf53) and h6 / h7.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
More Information
Catalog
Technical Information

Back to Linear Shaft Category

Technical Drawing - Linear Shafts

One End Stepped and Tapped/One End Stepped:Related Image

Basic Properties (e.g. material, hardness, coating, tolerance) - Linear Shafts

Type						Material	Hardness	Surface Treatment
One End Stepped and Tapped			One End Stepped
D Tol. g6	D Tol. h5	D Tol. f8	D Tol. g6	D Tol. h5	D Tol. f8
SFAG	SFUG	-	SFAC	SFCU	-	EN 1.3505 Equiv.	Effective Hardened Depth of Induction Hardening >>P.112 EN 1.3505 Equiv. 56HRC~ EN 1.4037 Equiv. 56HRC~	-
SSFAG	SSFUG	-	SSFAC	SSFCU	-	EN 1.4037 Equiv.		-
PSFAG	PSFUG	-	PSFAC	PSFCU	-	EN 1.3505 Equiv.		Hard Chrome Plating Plating Hardness: HV750 ~ Plating Thickness: 5µ or More
PSSFAG	PSSFUG	-	PSSFAC	PSSFCU	-	EN 1.4037 Equiv.
RSFAG	-	-	RSFAC	-	-	EN 1.3505 Equiv.		LTBC Plating
-	-	PSFGG	-	-	PSCGC	EN 1.1191 Equiv.	-	Hard Chrome Plating Plating Hardness: HV750 ~ Plating Thickness: 10µ or More
-	-	PSSFGG	-	-	PSSCGC	EN 1.4301 Equiv.	-

Further specifications can be found under the tab More Information.

Composition of a Product Code - Linear Shafts

Part Number	-	L	-	F	-	P	-	M
SFAG20	-	400	-	F25	-	P16	-	M10
SFUG20	-	400	-	F25	-	P16	-	M10
SFAC20	-	500	-	F25	-	P16

Alterations - Linear Shafts

One End Stepped and Tapped/One End Stepped:Related Image

You find further options in detail under Option Overview.

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

Part Number
PSSFGG35-[25-1498/1]-F[2-128/1]-P[9-32/1]-M[5,6,8,10,12,16,20,24]
PSSFGG40-[25-1498/1]-F[2-148/1]-P[11-37/1]-M[6,8,10,12,16,20,24,30]
PSSFGG50-[25-1498/1]-F[2-188/1]-P[11-47/1]-M[6,8,10,12,16,20,24,30]
PSSFUG8-[25-1098/1]-F[2-24/1]-P6-M3
PSSFUG10-[25-1198/1]-F[2-32/1]-P[6,7,8]-M[3,4,5]
PSSFUG12-[25-1398/1]-F[2-40/1]-P[6-10/1]-M[3,4,5,6]
PSSFUG12-[25-1398/1]-F[2-40/1]-P[6-10/1]-MD6
PSSFUG13-[25-1398/1]-F[2-52/1]-P[6-11/1]-M[3,4,5,6,8]
PSSFUG13-[25-1398/1]-F[2-52/1]-P[6-11/1]-MD[6,8]
PSSFUG15-[25-1398/1]-F[2-52/1]-P[6-13/1]-M[3,4,5,6,8,10]
PSSFUG15-[25-1398/1]-F[2-52/1]-P[6-13/1]-MD[6,8,10]
PSSFUG16-[25-1398/1]-F[2-56/1]-P[6-14/1]-M[3,4,5,6,8,10]
PSSFUG16-[25-1398/1]-F[2-56/1]-P[6-14/1]-MD[6,8,10]
PSSFUG18-[25-1398/1]-F[2-64/1]-P[7-16/1]-M[4,5,6,8,10,12]
PSSFUG18-[25-1398/1]-F[2-64/1]-P[7-16/1]-MD[6,8,10,12]
PSSFUG20-[25-1398/1]-F[2-68/1]-P[7-17/1]-M[4,5,6,8,10,12]
PSSFUG20-[25-1398/1]-F[2-68/1]-P[7-17/1]-MD[6,8,10,12]
PSSFUG25-[25-1398/1]-F[2-88/1]-P[7-22/1]-M[4,5,6,8,10,12,16]
PSSFUG25-[25-1398/1]-F[2-88/1]-P[7-22/1]-MD[6,8,10,12,16]
PSSFUG30-[25-1498/1]-F[2-108/1]-P[8-27/1]-M[5,6,8,10,12,16,20,24]
PSSFUG30-[25-1498/1]-F[2-108/1]-P[8-27/1]-MD[6,8,10,12,16,20]
PSSFUG35-[25-1498/1]-F[2-128/1]-P[9-32/1]-M[5,6,8,10,12,16,20,24]
PSSFUG40-[25-1498/1]-F[2-148/1]-P[11-37/1]-M[6,8,10,12,16,20,24,30]
PSSFUG50-[25-1498/1]-F[2-188/1]-P[11-47/1]-M[6,8,10,12,16,20,24,30]
RSFAC8-[25-500/1]-F[2-24/1]-P6
RSFAC10-[25-500/1]-F[2-32/1]-P[6,7,8]
RSFAC12-[25-500/1]-F[2-40/1]-P[6-10/1]
RSFAC13-[25-500/1]-F[2-52/1]-P[6-11/1]
RSFAC15-[25-500/1]-F[2-52/1]-P[6-13/1]
RSFAC16-[25-500/1]-F[2-56/1]-P[6-14/1]
RSFAC18-[25-500/1]-F[2-64/1]-P[8-16/1]
RSFAC20-[25-500/1]-F[2-68/1]-P[8-17/1]
RSFAC25-[25-500/1]-F[2-88/1]-P[8-22/1]
RSFAC30-[25-500/1]-F[2-108/1]-P[9-27/1]
RSFAG8-[25-500/1]-F[2-24/1]-P6-M3
RSFAG10-[25-500/1]-F[2-32/1]-P[6,7,8]-M[3,4,5]
RSFAG12-[25-500/1]-F[2-40/1]-P[6-10/1]-M[3,4,5,6]
RSFAG12-[25-500/1]-F[2-40/1]-P[6-10/1]-MD6
RSFAG13-[25-500/1]-F[2-52/1]-P[6-11/1]-M[3,4,5,6,8]
RSFAG13-[25-500/1]-F[2-52/1]-P[6-11/1]-MD[6,8]
RSFAG15-[25-500/1]-F[2-52/1]-P[6-13/1]-M[3,4,5,6,8,10]
RSFAG15-[25-500/1]-F[2-52/1]-P[6-13/1]-MD[6,8,10]
RSFAG16-[25-500/1]-F[2-56/1]-P[6-14/1]-M[3,4,5,6,8,10]
RSFAG16-[25-500/1]-F[2-56/1]-P[6-14/1]-MD[6,8,10]
RSFAG18-[25-500/1]-F[2-64/1]-P[8-16/1]-M[4,5,6,8,10,12]
RSFAG18-[25-500/1]-F[2-64/1]-P[8-16/1]-MD[6,8,10,12]
RSFAG20-[25-500/1]-F[2-68/1]-P[8-17/1]-M[4,5,6,8,10,12]
RSFAG20-[25-500/1]-F[2-68/1]-P[8-17/1]-MD[6,8,10,12]
RSFAG25-[25-500/1]-F[2-88/1]-P[8-22/1]-M[4,5,6,8,10,12,16]
RSFAG25-[25-500/1]-F[2-88/1]-P[8-22/1]-MD[6,8,10,12,16]
RSFAG30-[25-500/1]-F[2-108/1]-P[9-27/1]-M[5,6,8,10,12,16,20,24]
RSFAG30-[25-500/1]-F[2-108/1]-P[9-27/1]-MD[6,8,10,12,16,20]
SFAC8-[25-998/1]-F[2-24/1]-P6
SFAC10-[25-998/1]-F[2-32/1]-P[6,7,8]
SFAC12-[25-1198/1]-F[2-40/1]-P[6-10/1]
SFAC13-[25-1198/1]-F[2-52/1]-P[6-11/1]
SFAC15-[25-1198/1]-F[2-52/1]-P[6-13/1]
SFAC16-[25-1198/1]-F[2-56/1]-P[6-14/1]
SFAC18-[25-1198/1]-F[2-64/1]-P[8-16/1]
SFAC20-[25-1198/1]-F[2-68/1]-P[8-17/1]

Standard Unit Price	Minimum order quantity	Standard Shipping Days ?	RoHS	Shaft end Shape (Left)	[D] Diameter (Shaft) (mm)	[L] Length (Shaft) (mm)	Material	Heat Treatment	Surface Treatment	ISO Tolerance	Hardness	[MD] Size (thread - depth 3xM) (mm)	[F] Length (stud - offset - front side) (mm)	[P] Diameter (stepped - front side) (mm)	[M] Size (thread - depth 2xM) (mm)
-	1	7 Days	10	Internal thread	35	25 ～ 1498	[Stainless Steel (austenitic)] EN 1.4301 Equiv.	No Treatment	Hard Chrome Plating	f8	No Induction Hardening	-	2 ～ 128	9 ～ 32	5 ～ 24
-	1	7 Days	10	Internal thread	40	25 ～ 1498	[Stainless Steel (austenitic)] EN 1.4301 Equiv.	No Treatment	Hard Chrome Plating	f8	No Induction Hardening	-	2 ～ 148	11 ～ 37	6 ～ 30
-	1	7 Days	10	Internal thread	50	25 ～ 1498	[Stainless Steel (austenitic)] EN 1.4301 Equiv.	No Treatment	Hard Chrome Plating	f8	No Induction Hardening	-	2 ～ 188	11 ～ 47	6 ～ 30
-	1	7 Days	10	Internal thread	8	25 ～ 1098	[Stainless Steel (martensitique)] EN 1.4037 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (56HRC~)	-	2 ～ 24	6	3
-	1	7 Days	10	Internal thread	10	25 ～ 1198	[Stainless Steel (martensitique)] EN 1.4037 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (56HRC~)	-	2 ～ 32	6 ～ 8	3 ～ 5
-	1	7 Days	10	Internal thread	12	25 ～ 1398	[Stainless Steel (martensitique)] EN 1.4037 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (56HRC~)	-	2 ～ 40	6 ～ 10	3 ～ 6
-	1	7 Days	10	Internal thread	12	25 ～ 1398	[Stainless Steel (martensitique)] EN 1.4037 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (56HRC~)	6	2 ～ 40	6 ～ 10	-
-	1	7 Days	10	Internal thread	13	25 ～ 1398	[Stainless Steel (martensitique)] EN 1.4037 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (56HRC~)	-	2 ～ 52	6 ～ 11	3 ～ 8
-	1	7 Days	10	Internal thread	13	25 ～ 1398	[Stainless Steel (martensitique)] EN 1.4037 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (56HRC~)	6 ～ 8	2 ～ 52	6 ～ 11	-
-	1	7 Days	10	Internal thread	15	25 ～ 1398	[Stainless Steel (martensitique)] EN 1.4037 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (56HRC~)	-	2 ～ 52	6 ～ 13	3 ～ 10
-	1	7 Days	10	Internal thread	15	25 ～ 1398	[Stainless Steel (martensitique)] EN 1.4037 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (56HRC~)	6 ～ 10	2 ～ 52	6 ～ 13	-
-	1	7 Days	10	Internal thread	16	25 ～ 1398	[Stainless Steel (martensitique)] EN 1.4037 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (56HRC~)	-	2 ～ 56	6 ～ 14	3 ～ 10
-	1	7 Days	10	Internal thread	16	25 ～ 1398	[Stainless Steel (martensitique)] EN 1.4037 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (56HRC~)	6 ～ 10	2 ～ 56	6 ～ 14	-
-	1	7 Days	10	Internal thread	18	25 ～ 1398	[Stainless Steel (martensitique)] EN 1.4037 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (56HRC~)	-	2 ～ 64	7 ～ 16	4 ～ 12
-	1	7 Days	10	Internal thread	18	25 ～ 1398	[Stainless Steel (martensitique)] EN 1.4037 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (56HRC~)	6 ～ 12	2 ～ 64	7 ～ 16	-
-	1	7 Days	10	Internal thread	20	25 ～ 1398	[Stainless Steel (martensitique)] EN 1.4037 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (56HRC~)	-	2 ～ 68	7 ～ 17	4 ～ 12
-	1	7 Days	10	Internal thread	20	25 ～ 1398	[Stainless Steel (martensitique)] EN 1.4037 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (56HRC~)	6 ～ 12	2 ～ 68	7 ～ 17	-
-	1	7 Days	10	Internal thread	25	25 ～ 1398	[Stainless Steel (martensitique)] EN 1.4037 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (56HRC~)	-	2 ～ 88	7 ～ 22	4 ～ 16
-	1	7 Days	10	Internal thread	25	25 ～ 1398	[Stainless Steel (martensitique)] EN 1.4037 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (56HRC~)	6 ～ 16	2 ～ 88	7 ～ 22	-
-	1	7 Days	10	Internal thread	30	25 ～ 1498	[Stainless Steel (martensitique)] EN 1.4037 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (56HRC~)	-	2 ～ 108	8 ～ 27	5 ～ 24
-	1	7 Days	10	Internal thread	30	25 ～ 1498	[Stainless Steel (martensitique)] EN 1.4037 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (56HRC~)	6 ～ 20	2 ～ 108	8 ～ 27	-
-	1	7 Days	10	Internal thread	35	25 ～ 1498	[Stainless Steel (martensitique)] EN 1.4037 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (56HRC~)	-	2 ～ 128	9 ～ 32	5 ～ 24
-	1	7 Days	10	Internal thread	40	25 ～ 1498	[Stainless Steel (martensitique)] EN 1.4037 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (56HRC~)	-	2 ～ 148	11 ～ 37	6 ～ 30
-	1	7 Days	10	Internal thread	50	25 ～ 1498	[Stainless Steel (martensitique)] EN 1.4037 Equiv.	Induction Hardened	Hard Chrome Plating	h5	Induction Hardening (56HRC~)	-	2 ～ 188	11 ～ 47	6 ～ 30
-	1	12 Days	10	Straight	8	25 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	LTBC Plating	g6	Induction Hardening (58HRC~)	-	2 ～ 24	6	-
-	1	12 Days	10	Straight	10	25 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	LTBC Plating	g6	Induction Hardening (58HRC~)	-	2 ～ 32	6 ～ 8	-
-	1	12 Days	10	Straight	12	25 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	LTBC Plating	g6	Induction Hardening (58HRC~)	-	2 ～ 40	6 ～ 10	-
-	1	12 Days	10	Straight	13	25 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	LTBC Plating	g6	Induction Hardening (58HRC~)	-	2 ～ 52	6 ～ 11	-
-	1	12 Days	10	Straight	15	25 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	LTBC Plating	g6	Induction Hardening (58HRC~)	-	2 ～ 52	6 ～ 13	-
-	1	12 Days	10	Straight	16	25 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	LTBC Plating	g6	Induction Hardening (58HRC~)	-	2 ～ 56	6 ～ 14	-
-	1	12 Days	10	Straight	18	25 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	LTBC Plating	g6	Induction Hardening (58HRC~)	-	2 ～ 64	8 ～ 16	-
-	1	12 Days	10	Straight	20	25 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	LTBC Plating	g6	Induction Hardening (58HRC~)	-	2 ～ 68	8 ～ 17	-
-	1	12 Days	10	Straight	25	25 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	LTBC Plating	g6	Induction Hardening (58HRC~)	-	2 ～ 88	8 ～ 22	-
-	1	12 Days	10	Straight	30	25 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	LTBC Plating	g6	Induction Hardening (58HRC~)	-	2 ～ 108	9 ～ 27	-
-	1	12 Days	10	Internal thread	8	25 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	LTBC Plating	g6	Induction Hardening (58HRC~)	-	2 ～ 24	6	3
-	1	12 Days	10	Internal thread	10	25 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	LTBC Plating	g6	Induction Hardening (58HRC~)	-	2 ～ 32	6 ～ 8	3 ～ 5
-	1	12 Days	10	Internal thread	12	25 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	LTBC Plating	g6	Induction Hardening (58HRC~)	-	2 ～ 40	6 ～ 10	3 ～ 6
-	1	12 Days	10	Internal thread	12	25 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	LTBC Plating	g6	Induction Hardening (58HRC~)	6	2 ～ 40	6 ～ 10	-
-	1	12 Days	10	Internal thread	13	25 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	LTBC Plating	g6	Induction Hardening (58HRC~)	-	2 ～ 52	6 ～ 11	3 ～ 8
-	1	12 Days	10	Internal thread	13	25 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	LTBC Plating	g6	Induction Hardening (58HRC~)	6 ～ 8	2 ～ 52	6 ～ 11	-
-	1	12 Days	10	Internal thread	15	25 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	LTBC Plating	g6	Induction Hardening (58HRC~)	-	2 ～ 52	6 ～ 13	3 ～ 10
-	1	12 Days	10	Internal thread	15	25 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	LTBC Plating	g6	Induction Hardening (58HRC~)	6 ～ 10	2 ～ 52	6 ～ 13	-
-	1	12 Days	10	Internal thread	16	25 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	LTBC Plating	g6	Induction Hardening (58HRC~)	-	2 ～ 56	6 ～ 14	3 ～ 10
-	1	12 Days	10	Internal thread	16	25 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	LTBC Plating	g6	Induction Hardening (58HRC~)	6 ～ 10	2 ～ 56	6 ～ 14	-
-	1	12 Days	10	Internal thread	18	25 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	LTBC Plating	g6	Induction Hardening (58HRC~)	-	2 ～ 64	8 ～ 16	4 ～ 12
-	1	12 Days	10	Internal thread	18	25 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	LTBC Plating	g6	Induction Hardening (58HRC~)	6 ～ 12	2 ～ 64	8 ～ 16	-
-	1	12 Days	10	Internal thread	20	25 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	LTBC Plating	g6	Induction Hardening (58HRC~)	-	2 ～ 68	8 ～ 17	4 ～ 12
-	1	12 Days	10	Internal thread	20	25 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	LTBC Plating	g6	Induction Hardening (58HRC~)	6 ～ 12	2 ～ 68	8 ～ 17	-
-	1	12 Days	10	Internal thread	25	25 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	LTBC Plating	g6	Induction Hardening (58HRC~)	-	2 ～ 88	8 ～ 22	4 ～ 16
-	1	12 Days	10	Internal thread	25	25 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	LTBC Plating	g6	Induction Hardening (58HRC~)	6 ～ 16	2 ～ 88	8 ～ 22	-
-	1	12 Days	10	Internal thread	30	25 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	LTBC Plating	g6	Induction Hardening (58HRC~)	-	2 ～ 108	9 ～ 27	5 ～ 24
-	1	12 Days	10	Internal thread	30	25 ～ 500	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	LTBC Plating	g6	Induction Hardening (58HRC~)	6 ～ 20	2 ～ 108	9 ～ 27	-
-	1	4 Days	10	Straight	8	25 ～ 998	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	g6	Induction Hardening (58HRC~)	-	2 ～ 24	6	-
-	1	4 Days	10	Straight	10	25 ～ 998	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	g6	Induction Hardening (58HRC~)	-	2 ～ 32	6 ～ 8	-
-	1	4 Days	10	Straight	12	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	g6	Induction Hardening (58HRC~)	-	2 ～ 40	6 ～ 10	-
-	1	4 Days	10	Straight	13	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	g6	Induction Hardening (58HRC~)	-	2 ～ 52	6 ～ 11	-
-	1	4 Days	10	Straight	15	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	g6	Induction Hardening (58HRC~)	-	2 ～ 52	6 ～ 13	-
-	1	4 Days	10	Straight	16	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	g6	Induction Hardening (58HRC~)	-	2 ～ 56	6 ～ 14	-
-	1	7 Days	10	Straight	18	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	g6	Induction Hardening (58HRC~)	-	2 ～ 64	8 ～ 16	-
-	1	4 Days	10	Straight	20	25 ～ 1198	[Alloyed Steel] EN 1.3505 Equiv.	Induction Hardened	No Treatment	g6	Induction Hardening (58HRC~)	-	2 ～ 68	8 ～ 17	-

Back to Linear Shaft Category

Technical Drawing - Linear Shafts

Specification Tables - Linear Shafts

Overview of the shaft designs as PDF

D Tol.
D	g6	h5	f8
8	-0.005 -0.014	0 -0.006	-0.013 -0.035
10
12	-0.006 -0.017	0 -0.008	-0.016 -0.043
13
15
16
18
20	-0.007 -0.020	0 -0.009	-0.020 -0.053
25
30
35	-0.009 -0.025	0 -0.011	-0.025 -0.064
40
50

Part Number					1mm Increment			M (Coarse) Selection											(Y)Max.	R	C
Type				D	L	F	P	M (Coarse) Selection											(Y)Max.	R	C
One End Stepped and Tapped (D Tol. g6) SFAG SSFAG PSFAG PSSFAG RSFAG (D≤30, L≤500) (D Tolerance f8) PSFGG PSSFGG	(D Tol. h5) SFUG SSFUG PSFUG PSSFUG	One End Stepped (D Tol. g6) SFAC SSFAC PSFAC PSSFAC RSFAC (D≤30, L≤500) (D Tolerance f8) PSCGC PSSCGC	(D Tol. h5) SFCU SSFCU PSFCU PSSFCU	8	25~798	2≤F≤Px4	6	3											800	0.3 or Less	0.5 or Less
				10	25~798		6~ 8	3	4	5									800
				12	25~998		6~10	3	4	5	6								1000
				13	25~998		6~11	3	4	5	6	8							1000
				15	25~998		6~13	3	4	5	6	8	10						1000
				16	25~1198		6~14	3	4	5	6	8	10						1200
				18	25~1198		8~16		4	5	6	8	10	12					1200
				20	25~1198		8~17		4	5	6	8	10	12					1200		1.0 or Less
				25	25~1198		8~22		4	5	6	8	10	12	16				1200
				30	25~1498		9~27			5	6	8	10	12	16	20	24		1500
				35	25~1498		9~32			5	6	8	10	12	16	20	24		1500	0.5 or Less
				40	25~1498		11~37				6	8	10	12	16	20	24	30	1500
				50	25~1498		11~47				6	8	10	12	16	20	24	30	1500

•One End Stepped and Tapped P dimensions require M+3≤P. When Mx2.5+4≥Y, tap pilot holes may go through.

Alterations - Linear Shafts

One End Stepped and Tapped/One End Stepped:Related Image

You find further options in detail under Option Overview.

Surface Limits / Hardness - Linear Shafts

Limits of hardness and hardening depth

The linear shafts are processed after the base material has undergone inductive hardening. Therefore, the processed surfaces may result in a deviating hardness.
In the following example, you can view the affected areas of the linear shaft, which may be affected after processing by e.g. threads, level surfaces, key surfaces and transverse bores.

Limitation of linear shaft induction hardening

Cause for deviating hardness

The raw material of the linear shaft is treated via thermal induction before grinding. Thus, a configured linear shaft can be custom-made not only cost-effectively, but also with short delivery times. The linear shaft is hardened at the boundary layer (boundary layer hardening) of the liner shaft. The depth of the hardened boundary layer depends on the material used and the diameter of the linear shaft. The following table shows the hardening depth of linear shafts.
Coatings and plating are applied to the raw material after hardening and grinding. For more information, see Coatings of the Linear Shaft.

Boundary layer hardening of a linear shaft

Figure of boundary layer hardening: hardened boundary layer in light gray

Effective hardening depth of linear shafts

Outside diameter (D)	Effective hardening depth
	EN 1.1191 equiv.	EN 1.3505 equiv.	EN 1.4125 equiv.	EN 1.4301 equiv.
3	-	+0.5	+0.5	Without induction hardening
4	-
5	-
6 - 10	+0.3
12 - 13	+0.5	+0.7	+0.5
15 - 20			+0.7
25 - 50	+0.8	+1

Overview of the effective hardening depth as PDF

Coatings of the linear shaft

The surface coating is applied to the raw material before machining the linear shaft. Thanks to their coating, the usable surface or work surface of the linear shaft is not only protected against corrosion but also against wear.
Machined positions of the linear shafts, such as plane surfaces or threads, may be uncoated, as they are added afterwards. This can lead to the machined surfaces being corroded in a linear shaft made of steel. If the linear shaft is used in a corrosive environment, it is recommended to use a stainless steel linear shaft.
The following figure shows the areas of the linear shaft that are coated (crosshatched).

Surface coating after processing the linear shaft

Figure: Coating of linear shafts

You can find further information on surface treatment and hardness in this PDF .

General Information - Linear Shafts

Linear Shaft Selection Details

- Material: steel, stainless steel

- Coating/plating: uncoated, hard chrome plated, LTBC coated, chemically nickel-plated

- Heat treatment: untreated, inductively hardened

- ISO tolerances: h5, k5, g6, h6, h7, f8

- Precision classes: perpendicularity 0.03, concentricity (with thread and increments) Ø0.02, perpendicularity 0.20, concentricity (thread and stepper) Ø0.10

- Linearity/roundness: depends on diameter, here for the PDF

Description / basics of the linear shaft

Linear shafts are steel shafts that perform guiding tasks in combination with linear bearings, such as plain bearing bushings or linear ball bushings. Linear shaft holding functions can be adopted from shaft holders or linear ball bearing adapters. Most linear shafts are heat-treated (induction hardened) solid shafts. A special design of linear shafts is the hollow shaft, which is also called tubular shaft. Inductively hardened linear shafts have a high surface hardness and a tough core. The achievable surface hardness is approx. 55-58 HRC (see information on hardening depth). Linear shafts made of stainless steels can generally not be hardened. Therefore, these steel shafts should be chrome plated to protect them from wear.

Materials

Linear shafts are mainly hardened steel shafts. In addition to the selected heat treatment, the steel used in particular imparts its properties to the linear shaft, although it is a hollow shaft or a solid shaft. Therefore, special aspects such as hardness, corrosion and wear must be considered when selecting the shaft steel.

Coatings

To protect linear shafts from corrosion, the surface can be chemically nickel-plated. As an alternative to chemical nickel-plating, steel shafts can also be coated with LTBC. The LTBC coating is an anti-corrosive surface coating and it is a low-reflection coating, made of a 5 μm thick film of fluoropolymer, which in essence is a black film. In addition, the LTBC coating is resistant to bursting pressure by extreme or repeated bending. LTBC-coated linear shafts are thus particularly suitable for locations where corrosion or light reflections are undesirable. Linear shafts that require particularly high surface hardness and wear resistance can be hard chrome plated.

Function

The form and function of linear shafts differ from linear guiderails. Linear guiderails are square rails that work in combination with carriers (rotary elements, carriages) according to the rolling or sliding principle. Linear shafts on the other hand are precision-ground round steel shafts that take on a linear guide function in conjunction with linear ball bushings or plain bearing bushings (maintenance-free bushings).

Areas of Application

Linear shafts are intended for axial motion. Whether horizontal or vertical linear motion, all linear motions can be implemented with linear shafts. Common applications are stroke mechanisms and other applications with high demands on smoothness, precision and service life. Linear shafts can therefore be used in almost all industries of plant construction and mechanical engineering. Linear shafts are often found in 3D printers, metering equipment, measuring devices, positioning devices, alignment devices, bending devices and sorting equipment.

Instructions for Use / Installation - Linear Shafts

For product selection, please observe the linear shaft tolerances (e.g. h5, k5, g6, h6, h7, f8) in conjunction with the diameter tolerance of the plain bearing bushing (sliding bearing) after pressing in or the running circle diameter of the linear ball bearing (ball bushing).

Diameter change of linear ball bushings after pressing

Inner diameter of linear ball bushings or ball bushings

Shaft Fasteners

Application Example of a Linear Shaft - Linear Shafts with Linear Ball Bushings - Linear Shafts with Shaft Holder

Application Example of a Linear Shaft Application Example - Linear Shaft with Linear Ball Bearings - Linear Ball Bearings with an Adjusting Ring

Application Example of a Linear Shaft - Linear Shaft with Shaft Holder

Application Example of a Linear Shaft - Linear Shaft with Circlip Groove - Linear Shaft with Circlip

Application Example of a Linear Shaft - Linear Shaft with Holding Washer

Application Example of a Linear Shaft - Linear Thread - Outer Threaded Linear Shaft - Linear Threaded with inner and outer threads

Application Example of a Linear Shaft - Cross Bore Linear Shaft - Inner Thread Linear Shaft

Application Example of a Linear Shaft - Cross Bore Linear Shaft - Outer Thread Linear Shaft

Supplementary Article

Shaft holder

Adjusting rings/clamping rings

Product range of adjusting rings - product range of clamping rings

Linear ball bearing

Plain bearing bushings

Product range of sliding bearing bushings - plain bearing with housing

Ball guides

Industrial Applications

3D printer industry

Automotive industry

Pharmaceutical industry

Packaging industry

Products homepage

Basic information

Basic Shape	Solid, One End Stepped	Shaft end Shape (Right)	Straight	Shaft end Perpendicularity	0.2

Configure

368Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Shaft end Shape (Left)
- Straight
- Internal thread
Clear
[D] Diameter (Shaft)(mm)
8

10

12

13

15

16

18

20

25

30

35

40

50
Clear
[L] Length (Shaft)(mm)
[25-1498/1mm Unit(s)]
Clear
Material
- Unalloyed Steel
  - EN 1.1191 Equiv.
- Stainless Steel (austenitic)
  - EN 1.4301 Equiv.
- Alloyed Steel
  - EN 1.3505 Equiv.
- Stainless Steel (martensitique)
  - EN 1.4037 Equiv.
Clear
Heat Treatment
- No Treatment
- Induction Hardened
Clear
Surface Treatment
- No Treatment
- Hard Chrome Plating
- LTBC Plating
Clear
ISO Tolerance
f8

g6

h5
Clear
Hardness
- Induction Hardening (56HRC~)
- Induction Hardening (58HRC~)
- No Induction Hardening
Clear
[MD] Size (thread - depth 3xM)(mm)
6

8

10

12

16

20
Clear
[F] Length (stud - offset - front side)(mm)
[2-188/1mm Unit(s)]
Clear
[P] Diameter (stepped - front side)(mm)
6

7

8
[3-47/1mm Unit(s)]
Clear
[M] Size (thread - depth 2xM)(mm)
3

4

5

6

8

10

12

16

20

24

30
Clear
Type
- PSCGC
- PSFAC
- PSFAG
- PSFCU
- PSFGG
- PSFUG
- PSSCGC
- PSSFAC
- PSSFAG
- PSSFCU
- PSSFGG
- PSSFUG
- RSFAC
- RSFAG
- SFAC
- SFAG
- SFCU
- SFUG
- SSFAC
- SSFAG
- SSFCU
- SSFUG
Clear
Filter by CAD data type
- 2D
- 3D
Clear

Filter by standard shipping days

All

4 Days or Less

6 Days or Less

7 Days or Less

12 Days or Less
Reset

Optional Attributes

The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .

Frequently Asked Questions (FAQ)

Question:
What is the difference between a hollow shaft and a solid shaft?: Answer:
With the same size, there are three differences between a hollow shaft and a solid shaft. Hollow shafts weigh less. The inner cavity of a hollow shaft is suitable for use as a channel (cable channel). Solid shafts are a bit more rigid (higher resistance torque).
Question:
What is the minimum order of linear shafts from MISUMI?: Answer:
MISUMI supplies solid shafts, hollow shafts and precision shafts starting at a lot size of 1. This also applies to all other items in our product range.
Question:
Noises and vibrations occur with a linear shaft. In addition, there are jerky movements. What could cause this?: Answer:
In general, it may be caused if the steel shaft is not properly lubricated. In addition, an incorrectly selected diameter tolerance of the linear shafts may also make the cycle of motion more difficult. When using MISUMI linear ball bearings, a g6 shaft tolerance is recommended (tolerance recommendations may vary depending on the manufacturer).
Question:
What is the strength of a solid shaft?: Answer:
The strength of a linear shaft, although it is a solid shaft, hollow shaft or precision shaft, should always be selected in consideration of the strength of the material used.
Question:
What are the advantages of a hollow shaft over a solid shaft?: Answer:
There are various advantages of a hollow shaft compared to a solid shaft. If the outer diameter is the same, the weight of a hollow shaft is lower than that of a solid shaft. However, the cavity of the hollow shaft can also be used as a cable channel or for cooling. A hollow shaft is at the same weight or with the same cross-sectional area more rigid than a solid shaft, because the outer diameter is larger. However, the question that needs to be answered is whether the advantage is a greater room utilization or less weight.
Question:
Is a hollow shaft stiffer than a solid shaft?: Answer:
The rigidity of a hollow shaft is slightly lower with the same outer diameter than that of a solid shaft. However, with the same cross-sectional area or with the same weight, the stiffness of a hollow shaft is higher than that of a solid shaft, because the outer diameter of the hollow shaft is larger.
Question:
Why do I have running grooves on the linear shafts of my 3D printers?: Answer:
The running grooves on the linear shaft may have been created, for example, by using a linear ball bearing. To prevent grooves from forming on a steel shaft, it should be hardened and hard chromium plated, making it more durable and resistant to the wear and tear from ball bearings.
Question:
How do the flexure properties of hollow shafts and solid shafts differ?: Answer:
With an equally large outer diameter, a solid shaft has better flexure properties than an equally large hollow shaft. However, the solid shaft is not much stiffer than a hollow shaft with the same outer diameter, since the outer sections mainly carry the load. Hollow shafts with the same cross-sectional area are more rigid than solid shafts, because they have a larger outer diameter. Therefore, there is physically more material in the outer sections for the bending, which bears the loads.
Question:
I need a lacquered or matted shaft because reflections cause problems with the optics. Does MISUMI have something like that?: Answer:
MISUMI LTBC-coated linear shafts are an alternative to painted or matted steel shafts. The LTBC coating is low-reflection and has the same effect as painted and matte shafts. In addition, LTBC-coated linear shafts are more resistant to wear and tear and flaking. You can find further information on LTBC coating here .
Question:
It has been shown that a hollow shaft is stronger than a solid shaft made of the same material. Why?: Answer:
A hollow shaft with the same outer dimensions is principally not stronger than a solid shaft. However, a hollow shaft per weight unit is stronger.