Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
Part Number | Minimum order quantity | Volume Discount | Shank Diameter d (mm) | Number of Flutes | Overall Length L (mm) | #2 | #3 | #4 | #5 | #6 | #7 | #8 | |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1 | 7 Days | 4 | 2 Flutes | 50 | 3 ~ 4 | 1 ~ 2 | 2 | 1.5 ~ 2 | 0.2 ~ 1.8 | 0.1 ~ 1.7 | 5 ~ 75 | ||
1 | 7 Days | 6 | 2 Flutes | 60 | 5 ~ 6 | 2 ~ 5 | 2 ~ 6 | 3 ~ 4 | 0.2 ~ 4.8 | 0.1 ~ 4.7 | 5 ~ 75 | ||
1 | 7 Days | 8 | 2 Flutes | 60 | 6.1 ~ 8 | 2 ~ 5 | 2 ~ 8 | 4 ~ 6 | 0.2 ~ 4.8 | 0.1 ~ 4.7 | 5 ~ 75 | ||
1 | 7 Days | 10 | 2 Flutes | 80 | 8.1 ~ 10 | 2 ~ 5 | 2 ~ 10 | 5 ~ 7 | 0.2 ~ 4.8 | 0.1 ~ 4.7 | 5 ~ 75 | ||
1 | 7 Days | 12 | 2 Flutes | 80 | 10.1 ~ 12 | 2 ~ 5 | 2 ~ 12 | 6 ~ 8 | 0.2 ~ 4.8 | 0.1 ~ 4.7 | 5 ~ 75 | ||
1 | 7 Days | 16 | 2 Flutes | 100 | 12.1 ~ 16 | 2 ~ 5 | 2 ~ 16 | 8 ~ 12 | 0.2 ~ 4.8 | 0.1 ~ 4.7 | 5 ~ 75 | ||
1 | 7 Days | 4 | 4 Flutes | 50 | 3 ~ 4 | 1 ~ 2 | 2 | 1.5 ~ 2 | 0.2 ~ 1.8 | 0.1 ~ 1.7 | 5 ~ 75 | ||
1 | 7 Days | 6 | 4 Flutes | 60 | 5 ~ 6 | 1.8 ~ 5 | 2 ~ 6 | 3 ~ 4 | 0.2 ~ 4.8 | 0.1 ~ 4.7 | 5 ~ 75 | ||
1 | 7 Days | 8 | 4 Flutes | 60 | 6.1 ~ 8 | 2 ~ 5 | 2 ~ 8 | 4 ~ 6 | 0.2 ~ 4.8 | 0.1 ~ 4.7 | 5 ~ 75 | ||
1 | 7 Days | 10 | 4 Flutes | 80 | 8.1 ~ 10 | 2 ~ 5 | 2 ~ 10 | 5 ~ 7 | 0.2 ~ 4.8 | 0.1 ~ 4.7 | 5 ~ 75 | ||
1 | 7 Days | 12 | 4 Flutes | 80 | 10.1 ~ 12 | 2 ~ 5 | 2 ~ 12 | 6 ~ 8 | 0.2 ~ 4.8 | 0.1 ~ 4.7 | 5 ~ 75 | ||
1 | 7 Days | 16 | 4 Flutes | 100 | 12.1 ~ 16 | 2 ~ 5 | 2 ~ 16 | 8 ~ 12 | 0.2 ~ 4.8 | 0.1 ~ 4.7 | 5 ~ 75 |
Loading...
Model Number | Blade Diameter D 0.1 mm Unit Specification | Blade Width ℓ 0.1 mm Unit Specification | Neck Length ℓ1 1 mm Unit Specification | Neck Diameter* d1 0.1 mm Unit Specification | Edge Width b 0.05 mm Unit Specification | Corner R 0.05 mm Unit Specification | Single Corner θ 1° Specification | Overall Length L | |
Shank diameter d | |||||||||
STSRCEM (2-flute) STSRCEMW (4-flute) | 4 | 3.0 to 4.0 | 1.0 to 2.0 | 2 | 1.5 to 2.0 | 0.20 ≤ b ≤ ℓ−0.20 | 0.10 ≤ R ≤ ℓ−0.30 | 5° to 75° | 50 |
6 | 5.0 to 6.0 | 2.0 to 5.0 | 2 to 6 | 3.0 to 4.0 | 60 | ||||
8 | 6.1 to 8.0 | 2.0 to 5.0 | 2 to 8 | 4.0 to 6.0 | 60 | ||||
10 | 8.1 to 10.0 | 2.0 to 5.0 | 2 to 10 | 5.0 to 7.0 | 80 | ||||
12 | 10.1 to 12.0 | 2.0 to 5.0 | 2 to 12 | 6.0 to 8.0 | 80 | ||||
16 | 12.1 to 16.0 | 2.0 to 5.0 | 2 to 16 | 8.0 to 12.0 | 100 |
*Note that if the neck diameter does not satisfy the condition "2 ≤ D −d1", products are not available.
Click here for the cutting conditions
Material | Ultrafine Particulate Carbide |
---|
Configure
Basic Attributes
Shank Diameter d(mm)
Number of Flutes
Overall Length L(mm)
#2
#3
#4
#5
#6
#7
#8
Type
Filter by standard shipping days
Optional Attributes