Carbide Straight Edge Taper Ball End Mill, 2-flute / Inner R Type
Click on this image to zoom in.
Click on this image to zoom in.
[Features]
-Conical spherical shape with inner radius allowing efficient machining
.
-Conical spherical shape with inner radius allowing efficient machining
.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
| Part Number | Minimum order quantity | Volume Discount | Shank Diameter d (mm) | Overall Length L (mm) | #2 | #3 | #4 | #5 | #6 | |
|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 7 Days | 4 | 50 | 0.5 ～ 1.5 | 0 ～ 30 | 0 ～ 59 | 1 ～ 8 | 0.1 ～ 2 | ||
| 1 | 7 Days | 6 | 60 | 0.5 ～ 2.5 | 0 ～ 30 | 0 ～ 59 | 1 ～ 10 | 0.1 ～ 2 | ||
| 1 | 7 Days | 8 | 60 | 0.5 ～ 3.5 | 0 ～ 30 | 0 ～ 59 | 1 ～ 12 | 0.1 ～ 2 | ||
| 1 | 7 Days | 10 | 80 | 0.5 ～ 4.5 | 0 ～ 30 | 0 ～ 59 | 2 ～ 14 | 0.1 ～ 2 | ||
| 1 | 7 Days | 12 | 80 | 0.5 ～ 5.5 | 0 ～ 30 | 0 ～ 59 | 2 ～ 16 | 0.1 ～ 2 | ||
| 1 | 7 Days | 16 | 100 | 0.5 ～ 7.5 | 0 ～ 30 | 0 ～ 59 | 3 ～ 20 | 0.1 ～ 2 |
Loading...
Specification Table
| Model Number | Tip* R 0.01mm Unit Specification | Single Corner θ °−min 1' Unit Specification | Blade Length ℓ 0.5 mm Unit Specification | Inner R CR 0.01mm Unit Specification | Blade Diameter D | Overall Length L | |
| Shank diameter d | |||||||
| STBCREM | 4 | 0.50 to 1.50 | 0°15' to 30°0' | 1.0 to 8.0 | 0.10 ≤ CR ≤ 2.00 | D=R×2×cosθ | 50 |
| 6 | 0.50 to 2.50 | 1.0 to 10.0 | 60 | ||||
| 8 | 0.50 to 3.50 | 1.0 to 12.0 | 60 | ||||
| 10 | 0.50 to 4.50 | 2.0 to 14.0 | 80 | ||||
| 12 | 0.50 to 5.50 | 2.0 to 16.0 | 80 | ||||
| 16 | 0.50 to 7.50 | 3.0 to 20.0 | 100 |
*Note that the tip (R) may not be available depending on the size. Maximum blade length ℓ (max) = (d − D − 2 CR) / 2 / tanθ
Click here for the cutting conditions
Basic information
| Material | Ultrafine Particulate Carbide | Outer Diameter D(mm) | R x 2 x cosθ |
|---|
Configure
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Betalningsmetod
Faktura
Förskottsbetalning
Behovsstyrd tillverkning
Certifikat
Copyright © MISUMI Corporation All Rights Reserved.