Square Connectors（Protection function (environmentally resistant)：N/A）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
PCR Series
HONDA TSUSHIN KOGYO
Bellows, high-density contact type and accessories are, as with the PCS series, applicable to various uses.
[Features]
· A wide range of cores of 20 to 96 are available from the board to the cable.
· For EMI measures other than FCC.
· A wide range of cores of 20 to 128 are available from board to board.
· Products enabling live wire connection (three steps) are available.
· Parallel mating is feasible through a housing guide mechanism and the structure prevents shorting between adjacent contacts.
· Ideal for connection to horizontal, parallel, and vertical backs.- Volume Discount
Configure nowStarting from∗ ： 4.64 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
57 Series Soldering / DIP-Type Connector
FUJIKURA (DDK)
A 2.159-mm pitch ribbon-type connector for soldering. These are the core of the 57 family of connectors, which are available in 5 types.
[Features]
■ This 57 Series forms the core of the 57 family of DIP connectors. The following 5 types are available.
· 57-10 type (unit connection plug).
· 57-20 type (unit connection receptacle).
· 57-30 type (plug with straight hood for cables).
· 57-40 type (panel receptacle with locking spring).
· 57-60 type (cable relay receptacle).- Volume Discount
Configure nowStarting from∗ ： 5.41 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
PCS Series Cases
HONDA TSUSHIN KOGYO
PCS series case.
[Features]
• Board-to-cable cases are available for 20 - 96 contacts: Pressure contact connection is standard for cables (AWG #28 or 30), reducing wiring labor.
· A soldered type is also available.
• FCC and other EMI shielding: Sturdy construction is well suited for interfaces.
· Quick lock using metal lock spring.
· Models supporting panel relays are also available.
· Accessories for preventing incorrect insertion are also available.
• Wide range (34 - 150 contacts) of board-to-board connections available: Design minimizes insertions and extractions, even with a high number of contacts.
• Housings are structured so that all cleaning fluid drains out when cleaning away flux (mold-type male connectors).- Volume Discount
Configure nowStarting from∗ ： 8.79 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
D-Sub, D02, D02-M15 Series
JAPAN AVIATION ELECTRONICS(JAE)
A small, lightweight, highly reliable connector for making every type of electronic device smaller and more dense to support advanced features.
[Features]
・The D-sub connector is becoming the standard with its combination of pin and socket connector types.
・Interchangeable with different connector types and commonly used accessories.
・The shell joint shape has polarity, fully preventing accidental reverse insertion.
・The DO2 series is a high-density mounting connector with approximately twice as many contacts inside the same shell size as the D-sub.
・The outer appearance is short and compact. The contact and insulation material is contained in a hard, steel shell.
・There are 5 shell sizes (E, A, B, C, and D), which come with 9, 15, 25, 37, and 50 cores. Special arrays with coaxial and high-current contacts are also available.- Volume Discount
Configure nowStarting from∗ ： 1.57 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
MR Series Case
HONDA TSUSHIN KOGYO
Case for the MR series.
[Features]
· Dual screw and a spring lock mechanism that can withstand any shock.
· Dust-proof mechanism with excellent environmental resistance.
· Optimal for device miniaturization via improvement of robustness, compactness, weight and density.
· A relay type case is also provided- Volume Discount
Configure nowStarting from∗ ： 3.45 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
MR Series
HONDA TSUSHIN KOGYO
Small-type/multi-pin connector developed for use with data devices which uses wide-type terminals with exceptional reliability.
[Features]
· Dual screw and a spring lock mechanism that can withstand any shock.
· Dust-proof mechanism with excellent environmental resistance.
· Optimal for device miniaturization via improvement of robustness, compactness, weight and density.
· A relay type case is also provided- Volume Discount
Configure nowStarting from∗ ： 1.83 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
17JE Series Soldering Type Connector
FUJIKURA (DDK)
17 Series (Dsub type) soldering connection type square connector for cable equipment.
[Features]
· Square connector for solder wire connections, with solder cup type contact.
· Ni plating is used for the metal shell surface treatment, and the pin connector is bead treated.
· The hood is metalized plastic, which provides weight reduction and a high shielding effect.
· Either the pin connector or the socket connector can be selected.
· There are 4 shell sizes: 9, 15, 25, and 37. The core counts are 9 cores, 15 cores, 25 cores, and 37 cores.
· The cable and plug wire connection can be shielded with a metalized hood, which is effective as an EMI measure.
[Applications]
· Can be used as an interface for equipment and devices. Optimal for use on twisted wire of AWG22 or less.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 4.30 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
HDC HE Series
WEIDMUELLER
Insert for industrial plug-in connectors, consisting of contact element and insulating body.- Volume Discount
Configure nowStarting from∗ ： 7.89 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
PCR Series Case
HONDA TSUSHIN KOGYO
This is a PCR series case.
[Features]
· A wide range of cores of 20 to 96 are available from the board to the cable.
· For EMI measures other than FCC.
· A wide range of cores of 20 to 128 are available from board to board.
· Products enabling live wire connection (three steps) are available.
· Parallel mating is feasible through a housing guide mechanism and the structure prevents shorting between adjacent contacts.
· Ideal for connection to horizontal, parallel, and vertical backs.- Volume Discount
Configure nowStarting from∗ ： 3.73 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
MX34 Series
JAPAN AVIATION ELECTRONICS(JAE)
These are non-waterproof, small-type board-to-cable connectors developed mainly for on-board use.
[Features]
・A small-type/high density connector with abundant variations.
A small-type/high density connector with 2.2 mm (8 turns = 4 mm) contact pitch and 025 tab size.
・Single-row / two-row types are available supporting 3–40 pins.
・Furthermore, in addition to the through-hole type, circuit board pin connector, the SMT type (straight, 20/32 pins) is also available. This type is compatible with automatic mounting, allowing for a variety of connection formats.
・Reliable mating due to mechanical locking structure.
・The mechanical locking structure is resistant to vibration and pulling. Simply inserting the plug creates a clicking sound that ensures the lock is secured. This allows users to confirm proper mating even when visibility is restricted.
・Double-layered stop construction to prevent contact removal.
・Preserving the contact inside the housing involves a double-layer construction consisting of a primary stopping housing lance and a secondary, internal preset, socket housing retainer. This effectively prevents disconnection through vibrations and pulling.
・ Furthermore, the retainer is constructed so that its locking position cannot be set if the contact is not fully inserted. This allows for the detection of semi-inserted contacts.
・The socket lock is protected by a unique housing structure.
・A bridge is installed around the upper portion of the clock lever in the socket housing. This prevents warping and other lock lever damage when an external load is applied when cable harnesses are bundled together.
・High-reliability socket contact
・The contact is a box-style unit that is resistant to the effect of external power fluctuations, etc.
・The contacts have a double layer coil construction and are strongly resistant against prying. This is a highly reliable model that ensures a stable connection.
· Crimped type for easy wire connection.- Volume Discount
Configure nowStarting from∗ ： 1.26 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 1.56 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
HDC HA Series
WEIDMUELLER
Insert for industrial plug-in connectors, consisting of contact element and insulating body.- Volume Discount
Configure nowStarting from∗ ： 7.48 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
MX31 Series
JAPAN AVIATION ELECTRONICS(JAE)
The number of pins in these connectors has increased along with the greater role of electronic control in automobiles. In addition, this non-waterproof, high-density type connector fulfills the need for a small and lightweight product.
[Features]
[High-density implementation achieved with a large number of pins]
· These composite-type connectors include both signal (2.2 A) and power (5.7 A) internal circuits in the same connectors. These four-row type connectors are small, highly dense, and include a large number of pins with a 2.2 mm contact pitch (for signals), 3.2 mm contact pitch (for power), and up to a maximum of 135-pin connectors. Multiple socket connectors are combined together on the wire side for each single pin header on the circuit board side.
[Mechanical lock structure ensures secure fitting]
· The mechanical lock structure protects against vibrations and pulling. A distinct click sound helps confirm that secure fitting has occurred.
[Double locking structure reliably prevents loss of contact]
· Contact with the socket housing is maintained via a housing lance and an internal retainer contained in the housing. This double locking structure, which locks at two locations, reliably prevents loss of contact due to vibration or pulling.
· The retainer's structure ensures that a contact cannot be set into the locking position unless it is completely inserted. This makes it possible to detect partial insertion of contacts.
[Low insertion force structure with easy insertion and extraction]
· A low insertion force type structure requiring 70 N or less of force per socket housing to achieve insertion makes insertion and extraction easy.
[Tin and gold plating are available for the contact finish]
· The standard finish for contacts is tin plating. Gold plating is also available for 135-pin pin headers, offering a higher level of contact reliability.
[Misconfiguration-prevention types also available]
· Pin headers (70-pin and 135-pin versions) and socket housings come in standard types as well as types with different mating part conformations in order to prevent incorrect configuration. Use of these types prevents incorrect fitting when two different pin headers with pins in the same positions are used next to each other.
· Crimping enables easy connection.- Volume Discount
Configure nowStarting from∗ ： 3.61 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
57F Series Flat Cable Crimping Connector
FUJIKURA (DDK)
The 57F series is an all-plastic flat cable crimping connector.- Volume Discount
Configure nowStarting from∗ ： 11.07 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
PCS Series
HONDA TSUSHIN KOGYO
Multiple Varieties of Compact High Density Interface 1.27 Pitch Connectors
[Features]
· Board to cable types available in 20 to 96 cores.
• Cable connections are generally pressure welded (AWG #28, 30), helping save on labor costs for connecting wires.
· Soldered types also available.
▪ For EMI measures other than FCC.
• Built with a durable structure for use as an interface.
· Quick lock using a metal lock spring.
· Those for panel relays are also available.
· Accessories for preventing incorrect insertion are also available.
· A wide range of core numbers, from 34 to 150, are also available for board to board.
• Specifically designed for smooth insertion and extraction, even when using multiple cores.
• Features a liquid drainage structure within the housing to ensure no cleaning liquid is left behind during flux washing operations (mold type male connector).- Volume Discount
Configure nowStarting from∗ ： 6.14 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
IL-AG5 Series
JAPAN AVIATION ELECTRONICS(JAE)
[Features]
· Mechanical lock structure for secure mating.
· The locking method of the mechanical lock is strongly resistant to impact and pulling. By simply pushing in the plug, a distinct click sound accompanies the mating. Therefore, the successful mating can be confirmed when connecting to non-visible parts.
· Unique housing structure.
· The mating is highly reliable. The unique housing structure has protrusions and incorrect insertion prevention guides, which prevent adverse effects due to twisting when disconnecting.
· The double locking structure securely prevents contact dropout.
· The socket housing contact retainer uses a primary lock employing a contact lance and a secondary lock employing a flap that is integrated into the housing in two places. This provides a highly reliable double locking structure, which prevents contact dropout due to impacts or vibration.
· The flap is mounted so as to push on the contact, temporarily locking the contact to prevent incomplete insertion.
· Standard, and differently shaped incorrect insertion prevention types are available.
· The fitting element conformation and color (standard type: green/incorrect insertion prevention type: light blue) differ from the standard type. Therefore, the product is ideally suited for configurations that incorporate two connectors side-by-side in identical numbers.
· Contact featuring highly reliable design.
· Box type, which is resilient to external effects such as deformation due to external forces.
· Two-ply spring structure with excellent contact element characteristics.
· The primary lance is on the inside of the contact provides horizontal insertion prevention.
· Structure prevents reverse, horizontal insertion during housing mounting.- Volume Discount
Configure nowStarting from∗ ： 1.62 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
57FE Series Pressure Welded Type Flat Cable
FUJIKURA (DDK)
[Features]
• The 57FE series is a flat cable pressure-welded connector that has fittings covered by a metal shell, which is a countermeasure for electromagnetic radiation that helps reduce noise.
• Basic varieties include 10, 20, 30, and 40 types.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 15.36 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
FCN-360 Type Square Connector
FUJITSU COMPONENT
A versatile square connector for board-to-cable and board-to-board connections.
[Features]
· Features a 2.54 mm terminal arrangement between adjacents and between columns, allowing for compact high-density mounting.
· The robust shell guide helps prevent mis-insertions and protects the terminals.
· The compatible terminal connection methods are by crimping, pressure welding, soldering, wire wrapping and direct attachment.
· Combinations of jacks and plugs can be freely selected from a variety of options for use in different types of application.
[Applications]
· Optimal for industrial equipment, PLC, etc.- Volume Discount
Configure nowStarting from∗ ： 3.59 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
D-Sub / RS-232C Conversion Adapter
MISUMI
[Features]This is an adapter that converts the D-sub connector of the RS-232C cable between straight and cross. All are imperial threads (4-40).- Volume Discount
Configure nowStarting from∗ ： 6.93 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
HDC HEE Series
WEIDMUELLER
Insert for industrial plug-in connectors, consisting of contact element and insulating body.Configure nowStarting from∗ ： 16.97 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
HDC HQ Series
WEIDMUELLER
Insert for industrial plug-in connectors, consisting of contact element and insulating body.Configure nowStarting from∗ ： 5.89 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
HDC-CR (Frame)
WEIDMUELLER
Push-in frame made of zinc diecast to protect the modules.- Volume Discount
Configure nowStarting from∗ ： 7.97 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
HKP Series
HONDA TSUSHIN KOGYO
2.54 mm pitch, straight, right angle through hole type connector.
[Features]
· Based on our original design, the contacts have provide highly reliable contact.
· A wide range of connection combinations are possible from single circuit connections to multi-circuit connections.
· Wire connection work is performed using a crimping machine that can perform wire connections for 3, 000 terminals/H and a hand tool for small lots is also available.
· A UL-certified product is used as an insulator.
· Reworking wiring mistakes is also simplified using the removal tool.
▪ Mating with FFC, MFC, HSC, DIC series is supported- Volume Discount
Configure nowStarting from∗ ： 2.61 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
MRP Series Housings
HONDA TSUSHIN KOGYO
Housing for the MRP series.
[Features]
· Dual screw and a spring lock mechanism that can withstand any shock.
· Dust-proof mechanism with excellent environmental resistance.
· Optimal for device miniaturization via improvement of robustness, compactness, weight and density.
· A relay type case is also provided- Volume Discount
Configure nowStarting from∗ ： 2.37 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
IL-AG6 Series
JAPAN AVIATION ELECTRONICS(JAE)
This is a pin connector for reliable connection to the circuit board, formed to the terminal as a measure to prevent solder joint cracking.
[Features]
・A pin header for prevention of solder joint cracking.
・A straight-type pin header for mounting to circuit boards. Prevents solder cracking that occurs due to extreme changes in temperature, board and insulator expansion coefficient, and vibration.
・This type is formed to a section of the terminal mounted to the circuit board for alleviating stress on the soldered section.
・ Mating sockets: IL-AG5 Series
・ IL-AG5 Series sockets with crimped wire connections are used for the mating socket connectors.
・ Comes with welded legs for securing the circuit board.
・ Equipped with protrusions (legs) for holding the circuit board in place.
・ Ultrasonic welding provides greater rigidity for securing the circuit board.- Volume Discount
Configure nowStarting from∗ ： 3.81 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
IL-AG7 Series
JAPAN AVIATION ELECTRONICS(JAE)
This pin connector has flanges to screw in to the board.
[Features]
・This pin connector has flanges on both sides of the insulator to screw in to the board.
・By screwing in using the flanges, it can be fixed more firmly to the board.
・The straight type is molded to alleviate stress on the soldered parts, which prevents cracking of solder due to changes in temperature.
・This prevents differences in expansion coefficient between the board and insulator due to rapid temperature changes, and solder cracking caused by vibration.
・The conformation of the fitting element and color are different from the standard type (standard: green, mismatch prevention: light blue), so the product is ideal for use when two connectors are used next to each other with the same number of poles.- Volume Discount
Configure nowStarting from∗ ： 2.43 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
IL-AG9 Series
JAPAN AVIATION ELECTRONICS(JAE)
[Features]
A contact relay for easy-to-use, small wire relays, with a generic performance for use in all types of automotive on-board equipment.- Volume Discount
Configure nowStarting from∗ ： 1.49 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
MX10 Series
JAPAN AVIATION ELECTRONICS(JAE)
Our MX9 series of connectors boasts an impressive track record of use with air bags, and has been miniaturized for improved space saving.- Volume Discount
Configure nowStarting from∗ ： 2.72 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
QE Series
JAPAN AVIATION ELECTRONICS(JAE)
Using a metallic outer shell, this square connector is fitted using a lever.
[Features]
· Hard-type with metallic shell. Structure that is resistant to vibrational impact due to a lever lock (original type).
・A mismatch prevention key is included in the shell to prevent mistaken and reverse mating. By using the location setting post and key sold separately, 16 mismatch prevention patterns can be created.
・Also compatible with WV0/WL1 and other specialized railroad cables.
・3 cable-side plugs are provided to match the wires being used or the work being performed.
Original type: with lever lock mechanism
QE-A type: by enlarging the lever portion, this type is reinforced with a lever to prevent warping and other changes that occur during use.
QE4 Type: by scaling up the shell wire pullout opening and cable clamp diameter, cables with large outer coverings can now be accommodated with ease.
・Other than the original type, there is an enlarged mating shell and an enhanced shell to prevent prying and reverse mating on the panel side receptacle, as well as a noise reducing ferrite attached to the insulator. There are 3 types that include ferrite.
・The panel side receptacle is compatible with both electric wire crimp connection contact and circuit board through hole connection contact (pin contact) types.
・The shell type can be disassembled and rearranged for simple modification during circuit changes and incorrect wiring.- Volume Discount
Configure nowStarting from∗ ： 18.74 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
QX Series
JAPAN AVIATION ELECTRONICS(JAE)
[Features]
· A small, lightweight, highly reliable, square shape multipole connector.Configure nowStarting from∗ ： 58.53 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
17JE Series Straight DIP Type
FUJIKURA (DDK)
Straight DIP type connector which can be mounted vertically on a PCB.- 2D CAD data available
Configure nowStarting from∗ ： 6.68 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
17LE Series L-Type Dip-Type Connectors
FUJIKURA (DDK)
Connects to a circuit via dip soldering to PCB through-holes. The bracket is affixed to a PCB via fastening with screws.
[Features]
• Comes in 9, 15, 25, or 37 contact models.
• A base and hex nuts can be installed for securing the coupling to the other side.
• The surface of the metal shell is nickel-plated and the pin connectors are heat-treated.
• Different types of grounding fixtures are available for the brackets, delivering even more reliable EMI shielding.- 2D CAD data available
Configure nowStarting from∗ ： 9.87 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
57GE Series Straight DIP Ribbon Receptacle.
FUJIKURA (DDK)
[Features]
・The 57GE series consists of straight DIP-type connectors with fittings covered by a metal shell, which is a countermeasure against electromagnetic radiation that helps to reduce noise.
・Type 40 (receptacle for I/F).- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 8.87 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
57RE Series - Ribbon-Type, Lightweight, Right-Angle Receptacle Connectors
FUJIKURA (DDK)
These connectors have fewer parts than 57LE series connectors and are lighter as well. (The shell and end disk latch are a single unit, as are the insert and locater.)
[Features]
• The 57RE series connectors have fewer parts than the 57LE series connectors, and are lighter as well.
• Connectors on the other side fit plug connectors belonging to the 57, 57F, 57FE, and 57JE series.
• UL application filed (File No. E72124).- Volume Discount
Configure nowStarting from∗ ： 5.49 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Connector Shape |
| A/B/C |
| D/E/F |
| G/H/I |
| J/K/L |
| M/N/O |
| P/Q/R |
| S/T/U |
| Katakana |
| Number |
| Applicable pin/contact |
| Number Of Cores |
| Application |
| Allowable Current(A) |
| Allowable Voltage(V) |
| Wire connection method |
| Connection direction |
| Protection function (environmentally resistant) |
| Representative Standard |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | HONDA TSUSHIN KOGYO | FUJIKURA (DDK) | HONDA TSUSHIN KOGYO | JAPAN AVIATION ELECTRONICS(JAE) | HONDA TSUSHIN KOGYO | HONDA TSUSHIN KOGYO | FUJIKURA (DDK) | WEIDMUELLER | HONDA TSUSHIN KOGYO | JAPAN AVIATION ELECTRONICS(JAE) | UNIVER | WEIDMUELLER | JAPAN AVIATION ELECTRONICS(JAE) | FUJIKURA (DDK) | HONDA TSUSHIN KOGYO | JAPAN AVIATION ELECTRONICS(JAE) | FUJIKURA (DDK) | FUJITSU COMPONENT | MISUMI | WEIDMUELLER | WEIDMUELLER | WEIDMUELLER | HONDA TSUSHIN KOGYO | HONDA TSUSHIN KOGYO | JAPAN AVIATION ELECTRONICS(JAE) | JAPAN AVIATION ELECTRONICS(JAE) | JAPAN AVIATION ELECTRONICS(JAE) | JAPAN AVIATION ELECTRONICS(JAE) | JAPAN AVIATION ELECTRONICS(JAE) | JAPAN AVIATION ELECTRONICS(JAE) | FUJIKURA (DDK) | FUJIKURA (DDK) | FUJIKURA (DDK) | FUJIKURA (DDK) |
| Product Series | 57RE Series - Ribbon-Type, Lightweight, Right-Angle Receptacle Connectors | |||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
| ||||||||||||||||||||||||||||
| Starting from∗ | 4.64 € *Unit price with basic configuration Volume Discount | 5.41 € *Unit price with basic configuration Volume Discount | 8.79 € *Unit price with basic configuration Volume Discount | 1.57 € *Unit price with basic configuration Volume Discount | 3.45 € *Unit price with basic configuration Volume Discount | 1.83 € *Unit price with basic configuration Volume Discount | 4.30 € *Unit price with basic configuration Volume Discount | 7.89 € *Unit price with basic configuration Volume Discount | 3.73 € *Unit price with basic configuration Volume Discount | 1.26 € *Unit price with basic configuration Volume Discount | 1.56 € *Unit price with basic configuration Volume Discount | 7.48 € *Unit price with basic configuration Volume Discount | 3.61 € *Unit price with basic configuration Volume Discount | 11.07 € *Unit price with basic configuration Volume Discount | 6.14 € *Unit price with basic configuration Volume Discount | 1.62 € *Unit price with basic configuration Volume Discount | 15.36 € *Unit price with basic configuration Volume Discount | 3.59 € *Unit price with basic configuration Volume Discount | 6.93 € *Unit price with basic configuration Volume Discount | 16.97 € *Unit price with basic configuration | 5.89 € *Unit price with basic configuration | 7.97 € *Unit price with basic configuration Volume Discount | 2.61 € *Unit price with basic configuration Volume Discount | 2.37 € *Unit price with basic configuration Volume Discount | 3.81 € *Unit price with basic configuration Volume Discount | 2.43 € *Unit price with basic configuration Volume Discount | 1.49 € *Unit price with basic configuration Volume Discount | 2.72 € *Unit price with basic configuration Volume Discount | 18.74 € *Unit price with basic configuration Volume Discount | 58.53 € *Unit price with basic configuration | 6.68 € *Unit price with basic configuration | 9.87 € *Unit price with basic configuration | 8.87 € *Unit price with basic configuration Volume Discount | 5.49 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days | Same day | Same day | Same day | 5 Days | Same day | Same day | Same day | 4 Days | 6 Days | 5 Days | Same day | 4 Days | 5 Days | Same day | 6 Days | 5 Days | 5 Days | Same day | 5 Days | 4 Days | 5 Days | 4 Days | 6 Days | Same day | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days |
| Connector Shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape |
| A/B/C | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Other | - | - | - | - | - | - | - | - | - | - | - | - |
| D/E/F | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | FCN | Dsub | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| G/H/I | - | - | - | - | - | - | - | Other | - | - | - | Other | - | - | - | - | - | - | - | Other | Other | - | Other | - | - | - | - | - | - | - | - | - | - | - |
| J/K/L | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| M/N/O | - | - | - | - | MR | MR | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | MR | - | - | - | - | - | - | - | - | - | - |
| P/Q/R | Other | - | Other | - | - | - | - | - | Other | - | - | - | - | - | Other | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| S/T/U | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Katakana | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Number | - | Other | - | - | - | - | Other | - | - | - | - | - | - | - | - | - | Other | - | - | - | - | - | - | - | - | - | - | - | - | - | Other | Other | Other | Other |
| Applicable pin/contact | Male (plug) / Female (socket) | Male (plug) / Female (socket) | - | Male (plug) / Female (socket) | - | Male (plug) / Female (socket) | Male (plug) / Female (socket) | Male (plug) / Female (socket) | - | Male (plug) / Female (socket) | Female (socket) | Male (plug) / Female (socket) | Male (plug) / Female (socket) | Male (plug) / Female (socket) | Female (socket) | Male (plug) / Female (socket) | Female (socket) | Male (plug) | - | Male (plug) / Female (socket) | Female (socket) | Female (socket) | Male (plug) / Female (socket) | Male (plug) / Female (socket) | Male (plug) | Male (plug) | Male (plug) / Female (socket) | Male (plug) / Female (socket) | Male (plug) / Female (socket) | Female (socket) | Female (socket) | Male (plug) | Female (socket) | Female (socket) |
| Number Of Cores | 20 ～ 96 | 14 ～ 50 | 20 ～ 96 | 3 ～ 50 | 8 ～ 50 | 8 ～ 50 | 9 ～ 37 | 6 ～ 24 | 20 ～ 50 | 3 ～ 40 | 1 | 3 ～ 16 | 31 ～ 135 | - | 20 ～ 50 | 4 ～ 30 | 14 ～ 50 | 24 ～ 48 | - | 32 ～ 46 | 5 | - | 5 ～ 20 | 8 ～ 50 | 7 ～ 22 | 5 ～ 30 | 2 ～ 3 | 4 | 30 | 52 | 9 | 9 | 14 ～ 50 | 24 ～ 50 |
| Application | Cable Connection / For PCB / Panel Mount | Cable Connection / Panel Mount | Other | Cable Connection / For PCB | Other | For PCB / Panel Mount | Cable Connection / Panel Mount | - | Other | Cable Connection / For PCB | Cable Connection | - | Cable Connection / For PCB | Cable Connection / Panel Mount | Cable Connection | Cable Connection / For PCB | Cable Connection | Cable Connection | - | - | - | - | For PCB | Panel Mount | For PCB | For PCB | Cable Connection | Cable Connection | Cable Connection | Cable Connection | Panel Mount | Panel Mount | Panel Mount | Panel Mount |
| Allowable Current(A) | 1 | 5 | - | - | - | 3 | 5 | 16 ～ 24 | - | - | AC/DC | 10 ～ 16 | - | - | 1 | - | 1 | 3 | - | 16 | 16 | - | 3 | 3 | - | - | - | - | - | - | 5 | 5 | 3 | 3 |
| Allowable Voltage(V) | AC250 | AC500 | - | - | - | AC300 | AC300 | 500 | - | - | 12 VDC - 230 VAC | 250 | - | AC250 | AC250 | - | AC250 | 250 | - | 500 | 400 | - | AC300 | AC300 | - | - | - | - | - | - | AC300 | AC300 | AC500 | AC500 |
| Wire connection method | Solder / Pressure Welding | Solder | - | Solder / Crimp / Pressure Welding | - | Solder | Solder | Fasten With Screws | - | Crimp | Fasten With Screws | Fasten With Screws | Crimp | Pressure Welding | Solder | Crimp | Pressure Welding | Solder | - | Crimp | Crimp | - | - | Crimp | - | - | Crimp | - | Crimp | Crimp | - | - | - | - |
| Connection direction | Straight / Angle | Straight | Straight | Straight / Angle | Straight | Straight / Angle | Straight | Straight | Straight | Straight / Angle | Straight | Straight | Straight / Angle | Straight | Straight | Straight / Angle | Angle | Straight | - | Straight | Straight | Straight | Straight | Straight | Straight | Straight / Angle | Straight | Straight | Straight | Straight | Straight | Angle | Straight | Angle |
| Protection function (environmentally resistant) | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A |
| Representative Standard | - | - | - | - | - | - | - | UL / CSA | - | - | - | UL / CSA | - | - | - | - | - | - | - | UL / CSA | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Connector Shape
- Round
- Square shape
- Other
-
A/B/C
- Other
-
D/E/F
- Dsub
- FCN
- Other
-
G/H/I
- Heavy duty
- Other
-
J/K/L
- Other
-
M/N/O
- MR
- MIL
- Other
-
P/Q/R
- Other
-
S/T/U
- Other
-
Katakana
- Dynamic
-
Number
- Other
-
Applicable pin/contact
- Male (plug)
- Female (socket)
- Combination use male/female
- Other
-
Number Of Cores
- 1
- 2
- 2 (1 column x 2)
- 3
- 3 (1 column x 3)
- 4
- 4 (2 column x 2)
- 5
- 5 (2 columns x 2 + center: 1)
- 6
- 6 (1 column x 6)
- 6 (2 columns x 3)
- 7
- 7 (2 columns x 3 + center: 1)
- 8
- 8 (2 columns x 3 + center: 2)
- 8 (2 columns x 4)
- 9
- 9 (2 columns x 4 + center: 1)
- 9 (3 columns x 3)
- 10
- 11
- 12
- 12 (2 columns x 5 + center: 2)
- 12 (2 columns x 6)
- 12 (3 columns x 4)
- 13
- 13 (2 columns x 6 + center: 1)
- 14
- 15
- 16
- 17
- 17 (2 columns x 8 + center: 1)
- 18
- 18 (3 columns x 6)
- 20
- 21
- 21 (2 columns x 10 + center: 1)
- 22
- 24
- 25
- 26
- 27
- 28
- 30
- 31
- 32
- 34
- 35
- 36
- 37
- 38
- 40
- 41
- 42
- 45
- 46
- 48
- 50
- 51
- 52
- 56
- 60
- 64
- 68
- 70
- 72
- 75
- 80
- 92
- 96
- 98
- 100
- 104
- 108
- 110
- 120
- 135
-
Application
-
Allowable Current(A)
-
Allowable Voltage(V)
- 5
- DC 12
- 12 VDC - 230 VAC
- 17.5
- 24
- 25
- 30
- AC30
- 50
- AC50
- 72
- 100
- AC100
- AC120
- 125
- AC125
- 150
- AC150
- AC150/DC200
- 160
- AC200
- 230/400
- 250
- AC250
- 300
- AC300
- 320
- AC350
- DC350
- 400
- AC400
- 400/400 V (Leistungs-/Steuerungsbereich)
- 400/690
- 400/690 V (Leiter-Erde/Leiter/Leiter)
- 400/690 V(Leiter-Erde/Leiter-Leiter)
- 500
- AC500
- AC/DC500
- 550
- 600
- AC600
- 630
- 690
- 690/160 V (Leistungs-/Steuerungsbereich)
- 830
- 830/400 V (Leistungs-/Steuerungsbereich)
- 1000
- 1550
- AC/DC3000
- 3100
-
Wire connection method
- Solder
- Crimp
- Pressure Welding
- Fasten With Screws
- Other
-
Connection direction
- Straight
- Angle
- Other
-
Protection function (environmentally resistant)
-
Representative Standard
Brand
-
- JAPAN AVIATION ELECTRONICS(JAE) (10)
- FUJIKURA (DDK) (8)
- HONDA TSUSHIN KOGYO (8)
- WEIDMUELLER (5)
- UNIVER (1)
- FUJITSU COMPONENT (1)
- ILME (0)
- KEL (0)
- 3M (0)
- FINDER (0)
- FISCHER ELEKTRONIK (0)
- IFM ELECTRONIC (0)
- NEUTRIK (0)
- LUMBERG (0)
- HELLERMANN TYTON (0)
- AMPHENOL ICC (0)
- CONNFLY (0)
- PTR (0)
- DECA (0)
- HIROSE ELECTRONIC (0)
- BINDER (0)
- SOURIAU (0)
- LAPP (0)
- HARTING (0)
- EDAC (0)
- PROVERTHA (0)
- PHOENIX CONTACT (0)
- CONEC (0)
- WAGO (0)
- TE CONNECTIVITY (0)
- TRU COMPONENTS (0)
- MOLEX (0)
- ECON CONNECT (0)
- HIRSCHMANN (0)
- ASSMANN WSW (0)
- OMRON (0)
- VOGT VERBINDUNGSTECHNIK (0)
- MH CONNECTORS (0)
- BKL ELECTRONIC (0)
CAD data type
-
- 2D
- 3D
Categories related to Square Connectors
Betalningsmetod
Faktura
Förskottsbetalning
Behovsstyrd tillverkning
Certifikat
Copyright © MISUMI Corporation All Rights Reserved.