Shipping Days |
|
---|
?* Information on days to ship and prices
OSG
Configure now
|
|
Starting from∗ : | 16.04 € |
---|---|
Min. Shipping Days : | Same day |
*Unit price with basic configuration
OSG
Configure now
|
|
Starting from∗ : | 15.45 € |
---|---|
Min. Shipping Days : | 6 Days |
*Unit price with basic configuration
OSG
Configure now
|
|
Starting from∗ : | 15.94 € |
---|---|
Min. Shipping Days : | 6 Days |
*Unit price with basic configuration
OSG
Configure now
|
|
Starting from∗ : | 16.04 € |
---|---|
Min. Shipping Days : | 6 Days |
*Unit price with basic configuration
OSG
Configure now
|
|
Starting from∗ : | 19.66 € |
---|---|
Min. Shipping Days : | Same day |
*Unit price with basic configuration
YAMAWA MFG
Configure now
|
|
Starting from∗ : | 99.90 € |
---|---|
Min. Shipping Days : | 6 Days |
*Unit price with basic configuration
NACHI(FUJIKOSHI)
Configure now
|
|
Starting from∗ : | 30.24 € |
---|---|
Min. Shipping Days : | 6 Days |
*Unit price with basic configuration
OSG
Configure now
|
|
Starting from∗ : | 24.73 € |
---|---|
Min. Shipping Days : | 6 Days |
*Unit price with basic configuration
OSG
Configure now
|
|
Starting from∗ : | 45.80 € |
---|---|
Min. Shipping Days : | 6 Days |
*Unit price with basic configuration
OSG
Configure now
|
|
Starting from∗ : | 30.20 € |
---|---|
Min. Shipping Days : | 6 Days |
*Unit price with basic configuration
OSG
Configure now
|
|
Starting from∗ : | 16.26 € |
---|---|
Min. Shipping Days : | 8 Days |
*Unit price with basic configuration
OSG
Configure now
|
|
Starting from∗ : | 19.89 € |
---|---|
Min. Shipping Days : | Same day |
*Unit price with basic configuration
CARMEX
Configure now
|
|
Starting from∗ : | 229.39 € |
---|---|
Min. Shipping Days : | 5 Days |
*Unit price with basic configuration
CARMEX
Configure now
|
|
Starting from∗ : | 208.53 € |
---|---|
Min. Shipping Days : | 5 Days |
*Unit price with basic configuration
MISUMI
Configure now
|
|
Starting from∗ : | 222.23 € |
---|---|
Min. Shipping Days : | 7 Days |
*Unit price with basic configuration
MISUMI
Configure now
|
|
Starting from∗ : | 14.59 € |
---|---|
Min. Shipping Days : | 5 Days |
*Unit price with basic configuration
MISUMI
Configure now
|
|
Starting from∗ : | 13.81 € |
---|---|
Min. Shipping Days : | 5 Days |
*Unit price with basic configuration
OSG
Configure now
|
|
Starting from∗ : | 83.34 € |
---|---|
Min. Shipping Days : | 6 Days |
*Unit price with basic configuration
OSG
Configure now
|
|
Starting from∗ : | 26.47 € |
---|---|
Min. Shipping Days : | Same day |
*Unit price with basic configuration
OSG
Configure now
|
|
Starting from∗ : | 158.30 € |
---|---|
Min. Shipping Days : | 6 Days |
*Unit price with basic configuration
OSG
Configure now
|
|
Starting from∗ : | 295.75 € |
---|---|
Min. Shipping Days : | 6 Days |
*Unit price with basic configuration
OSG
Configure now
|
|
Starting from∗ : | 17.52 € |
---|---|
Min. Shipping Days : | Same day |
*Unit price with basic configuration
OSG
Configure now
|
|
Starting from∗ : | 19.52 € |
---|---|
Min. Shipping Days : | 6 Days |
*Unit price with basic configuration
OSG
Configure now
|
|
Starting from∗ : | 18.92 € |
---|---|
Min. Shipping Days : | 6 Days |
*Unit price with basic configuration
YAMAWA MFG
Configure now
|
|
Starting from∗ : | 110.69 € |
---|---|
Min. Shipping Days : | 6 Days |
*Unit price with basic configuration
CARMEX
Configure now
|
|
Starting from∗ : | 208.52 € |
---|---|
Min. Shipping Days : | 5 Days |
*Unit price with basic configuration
MISUMI
Configure now
|
|
Starting from∗ : | 113.79 € |
---|---|
Min. Shipping Days : | 5 Days |
*Unit price with basic configuration
OSG
Configure now
|
|
Starting from∗ : | 101.50 € |
---|---|
Min. Shipping Days : | 6 Days |
*Unit price with basic configuration
OSG
Configure now
|
|
Starting from∗ : | 28.34 € |
---|---|
Min. Shipping Days : | 6 Days |
*Unit price with basic configuration
OSG
Configure now
|
|
Starting from∗ : | 83.15 € |
---|---|
Min. Shipping Days : | 6 Days |
*Unit price with basic configuration
OSG
Configure now
|
|
Starting from∗ : | 24.43 € |
---|---|
Min. Shipping Days : | 6 Days |
*Unit price with basic configuration
OSG
Configure now
|
|
Min. Shipping Days : | 6 Days |
---|
OSG
Configure now
|
|
Starting from∗ : | 24.43 € |
---|---|
Min. Shipping Days : | 6 Days |
*Unit price with basic configuration
OSG
Configure now
|
|
Starting from∗ : | 22.33 € |
---|---|
Min. Shipping Days : | 6 Days |
*Unit price with basic configuration
NS TOOL
Configure now
|
|
Starting from∗ : | 100.28 € |
---|---|
Min. Shipping Days : | 6 Days |
*Unit price with basic configuration
TANOI MFG
Configure now
|
|
Starting from∗ : | 58.01 € |
---|---|
Min. Shipping Days : | 6 Days |
*Unit price with basic configuration
GUHRING
Configure now
|
|
Starting from∗ : | 24.56 € |
---|---|
Min. Shipping Days : | 24 Days |
*Unit price with basic configuration
CARMEX
Configure now
|
|
Starting from∗ : | 229.39 € |
---|---|
Min. Shipping Days : | 5 Days |
*Unit price with basic configuration
CARMEX
Configure now
|
|
Starting from∗ : | 229.39 € |
---|---|
Min. Shipping Days : | 5 Days |
*Unit price with basic configuration
CARMEX
Configure now
|
|
Starting from∗ : | 273.20 € |
---|---|
Min. Shipping Days : | 5 Days |
*Unit price with basic configuration
CARMEX
Configure now
|
|
Starting from∗ : | 273.20 € |
---|---|
Min. Shipping Days : | 5 Days |
*Unit price with basic configuration
Configure now
|
|
Starting from∗ : | 24.10 € |
---|---|
Min. Shipping Days : | 6 Days |
*Unit price with basic configuration
Configure now
|
|
Starting from∗ : | 25.83 € |
---|---|
Min. Shipping Days : | 6 Days |
*Unit price with basic configuration
Configure now
|
|
Starting from∗ : | 47.40 € |
---|---|
Min. Shipping Days : | Same day |
*Unit price with basic configuration
OSG
Configure now
|
|
Starting from∗ : | 24.50 € |
---|---|
Min. Shipping Days : | 6 Days |
*Unit price with basic configuration
Brand |
---|
Product Series |
Starting from∗ |
Min. Shipping Days |
Screw Types |
Screw size (Nominal) |
Pitch (P), Number of Threading(mm) |
Chamfer threads (Lcf) |
Tool Material Type |
work material |
Tap Type |
Hole type |
Coating Y/N |
Coating Type |
Overall Length (L)(mm) |
Brand | OSG | OSG | OSG | OSG | OSG | YAMAWA MFG | NACHI(FUJIKOSHI) | OSG | OSG | OSG | OSG | OSG | CARMEX | CARMEX | MISUMI | MISUMI | MISUMI | OSG | OSG | OSG | OSG | OSG | OSG | OSG | YAMAWA MFG | CARMEX | MISUMI | OSG | OSG | OSG | OSG | OSG | OSG | OSG | NS TOOL | TANOI MFG | GUHRING | CARMEX | CARMEX | CARMEX | CARMEX | OSG | OSG | OSG | OSG |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | Taper Tap Series for Pipes V Coating Powder HSS (For High Hardness Steel) V-XPM-TPT | TiAlN Coated Carbide Threading Cutter, for High-Hardness Steel / for Internal Metric Threads | TiN Coated High-Speed Steel Spiral Tap【1-5 Pieces Per Package】 | TiN Coated High-Speed Steel Point Tap【1-5 Pieces Per Package】 | Hand Tap Series, Hand Taps for Super High Hardness Steel, WH55-OT | Hand Tap Series, V Coating Powder High Speed (High Hardness Steel), V-XPM-HT | MTI Mini Mill Thread, w / o Finishing Teeth, for Both 60° Inner / Outer Diameters | DLC Coated Carbide Threading Cutter for Aluminum Machining, for Internal Metric Threads / 2D Model | Planet Cutter Series Small Diameter Planet Cutters WH-VM-PNC | Point Tap Series, HR Coating, for NI-Base Heat Resistant Alloys, WHR-NI-POT | Hand Tap Series, Hand Taps for Super High Hardness Steel, VX-OT | ||||||||||||||||||||||||||||||||||
Starting from∗ | 16.04 € *Unit price with basic configuration Volume Discount | 15.45 € *Unit price with basic configuration Volume Discount | 15.94 € *Unit price with basic configuration Volume Discount | 16.04 € *Unit price with basic configuration Volume Discount | 19.66 € *Unit price with basic configuration Volume Discount | 99.90 € *Unit price with basic configuration | 30.24 € *Unit price with basic configuration | 24.73 € *Unit price with basic configuration Volume Discount | 45.80 € *Unit price with basic configuration | 30.20 € *Unit price with basic configuration Volume Discount | 16.26 € *Unit price with basic configuration Volume Discount | 19.89 € *Unit price with basic configuration Volume Discount | 229.39 € *Unit price with basic configuration | 208.53 € *Unit price with basic configuration | 222.23 € *Unit price with basic configuration Volume Discount | 14.59 € *Unit price with basic configuration Volume Discount | 13.81 € *Unit price with basic configuration Volume Discount | 83.34 € *Unit price with basic configuration Volume Discount | 26.47 € *Unit price with basic configuration Volume Discount | 158.30 € *Unit price with basic configuration Volume Discount | 295.75 € *Unit price with basic configuration | 17.52 € *Unit price with basic configuration Volume Discount | 19.52 € *Unit price with basic configuration Volume Discount | 18.92 € *Unit price with basic configuration Volume Discount | 110.69 € *Unit price with basic configuration | 208.52 € *Unit price with basic configuration | 113.79 € *Unit price with basic configuration Volume Discount | 101.50 € *Unit price with basic configuration Volume Discount | 28.34 € *Unit price with basic configuration | 83.15 € *Unit price with basic configuration | 24.43 € *Unit price with basic configuration | - Volume Discount | 24.43 € *Unit price with basic configuration | 22.33 € *Unit price with basic configuration Volume Discount | 100.28 € *Unit price with basic configuration Volume Discount | 58.01 € *Unit price with basic configuration | 24.56 € *Unit price with basic configuration Volume Discount | 229.39 € *Unit price with basic configuration | 229.39 € *Unit price with basic configuration | 273.20 € *Unit price with basic configuration | 273.20 € *Unit price with basic configuration | 24.10 € *Unit price with basic configuration Volume Discount | 25.83 € *Unit price with basic configuration Volume Discount | 47.40 € *Unit price with basic configuration | 24.50 € *Unit price with basic configuration |
Min. Shipping Days | Same day | 6 Days | 6 Days | 6 Days | Same day | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 8 Days | Same day | 5 Days | 5 Days | 7 Days | 5 Days | 5 Days | 6 Days | Same day | 6 Days | 6 Days | Same day | 6 Days | 6 Days | 6 Days | 5 Days | 5 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 6 Days | 24 Days | 5 Days | 5 Days | 5 Days | 5 Days | 6 Days | 6 Days | Same day | 6 Days |
Screw Types | Meter / Unified | Meter | Meter / Unified | Meter | Meter | Meter | Meter | Meter | Taper for Pipe | Meter | Meter | Meter / Unified | Parallel for Pipes | Meter | Meter | Meter | Meter | Meter | Meter | Meter / Unified / Taper for Pipe | Meter | Meter / Unified | Meter | Meter | Meter | Meter | Meter | Meter / Unified | Meter | Meter | Meter | Meter / Unified | Meter / Unified | Meter | Other | Meter | Meter | Meter | Parallel for Pipes | Parallel for Pipes | Parallel for Pipes | Meter | Meter | Taper for Pipe | Meter |
Screw size (Nominal) | 1-8UNC ~ M56 | M1.4 ~ M42 | 1/2-20UNF ~ M24 | M1.4 ~ M16 | M1 ~ M45 | M2 ~ M20 | M2 ~ M24 | M8 ~ M10 | R1 ~ R3/8 | M3 ~ M14 | M2 ~ M24 | M1 ~ No6UN | - | - | M2 ~ M12 | M3 ~ M10 | M3 ~ M10 | M3 ~ M12 | M3 ~ M12 | - | M6 ~ M12 | No0UN ~ M20 | M3 | M4 | M3 ~ M12 | - | M3 ~ M16 | - | M8 | M2 ~ M20 | M3 ~ M12 | M1 ~ M12 | M1 ~ M12 | M6 | S0.1 ~ S1.4 | M2 ~ M20 | M2 ~ M20 | M3 ~ M27 | - | - | - | M3 ~ M16 | M3 ~ M12 | Rc1/2 ~ Rc3/8 | M2 ~ M24 |
Pitch (P), Number of Threading(mm) | 0.25 ~ 5.5 | 0.3 ~ 4.5 | 0.25 ~ 3 | 0.3 ~ 2 | 0.2 ~ 4.5 | 0.4 ~ 2.5 | 0.25 ~ 3 | 1 ~ 1.25 | 11 ~ 28 | 0.5 ~ 2 | 0.4 ~ 3 | 0.25 ~ 56 | 11 ~ 28 | - | 0.4 ~ 1.75 | 0.5 ~ 1.5 | 0.5 ~ 1.5 | 0.5 ~ 1.75 | 0.5 ~ 1.75 | 1 ~ 28 | 1 ~ 1.75 | 0.25 ~ 80 | 0.5 | 0.7 | 0.5 ~ 1.75 | - | 0.5 ~ 2 | 0.25 ~ 32 | 1.25 | 0.4 ~ 2.5 | 0.5 ~ 1.75 | 0.25 ~ 56 | 0.25 ~ 56 | 1 | 0.025 ~ 0.3 | 0.4 ~ 2.5 | 0.4 ~ 2.5 | 0.5 ~ 3 | - | - | - | 0.5 ~ 2 | 0.5 ~ 1.75 | 14 ~ 28 | 0.25 ~ 3 |
Chamfer threads (Lcf) | 1.5P ~ 2.5P | 5P | 5P | 2.5P | 2P ~ 4P | 5P | 2.5 | 5P | 3P | 6P | 1.5P ~ 5P | 1P | - | - | - | 1.5 P ~ 2.5 P | 5 P | 2.5P ~ 5P | 2.5P ~ 5P | - | - | 2P ~ 4P | 2P | 2P | 5P | - | - | - | 5P | 3P | 2P ~ 4P | 2P ~ 4P | 2P ~ 4P | 8P | - | 1P ~ 2P | - | - | - | - | - | 3P | - | 2.5P | 2.5P |
Tool Material Type | Powder high-speed steel / Vanadium High-Speed Steel | Vanadium High-Speed Steel | Powder high-speed steel | Vanadium High-Speed Steel | Powder high-speed steel / Vanadium High-Speed Steel | Carbide | Alloy HSS | Vanadium High-Speed Steel | Powder high-speed steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Powder high-speed steel | Carbide | Carbide | Carbide | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Carbide | Powder high-speed steel | Carbide | Carbide | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Carbide | Carbide | Carbide | Carbide | Powder high-speed steel | Carbide | Vanadium High-Speed Steel | Powder high-speed steel | Powder high-speed steel | Vanadium High-Speed Steel | Carbide | High-speed steel | High-speed steel | Carbide | Carbide | Carbide | Carbide | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Powder high-speed steel |
work material | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | High Hardness Steel (50-60 HRC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Quenched and tempered steel (45 to 55 HRC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] | Quenched and tempered steel (45 to 55 HRC)[◎] | Quenched and tempered steel (45 to 55 HRC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Stainless Steel (JIS-SUS)[○] / Copper (Cu)[◎] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] | Quenched and tempered steel (45 to 55 HRC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○/◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass cast iron (BsC)[○/◎] / Aluminum Rolled Material (AL)[○/◎] / Aluminum Alloy Casting (AC, ADC)[○/◎] / Magnesium Alloy (MC)[○/◎] / Zinc Alloy Casting (ZDC)[○/◎] / Titanium Alloy (Ti-6Al-4V, etc)[○/◎] / Nickel-based alloy (Inconel, etc.)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Nickel-based alloy (Inconel, etc.)[◎] | High Hardness Steel (50-60 HRC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Quenched and tempered steel (45 to 55 HRC)[◎] / High Hardness Steel (50-60 HRC)[○] / Tool Steel (Before SKD Hardening)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Titanium Alloy (Ti-6Al-4V, etc)[◎] / Thermosetting plastic (bakelite, phenol, etc.)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Stainless Steel (JIS-SUS)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | - | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○] / Thermosetting plastic (bakelite, phenol, etc.)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○] | Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Steel casting (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Quenched and tempered steel (25 to 35 HRC)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] |
Tap Type | Spiral Tap | Point tap | Point tap | Spiral Tap | Roll tap | Point tap | Spiral Tap | Point tap | Tap for pipes | Point tap | Hand Tap | Roll tap | Thread cutter | Thread cutter | Thread cutter | Spiral Tap | Point tap | Hand Tap | Hand Tap | Thread cutter | Thread cutter | Roll tap | Roll tap | Roll tap | Point tap | Thread cutter | Thread cutter | Thread cutter | Point tap | Hand Tap | Roll tap | Roll tap | Roll tap | Roll tap | Thread cutter | Roll tap | Spiral Tap | Thread cutter | Thread cutter | Thread cutter | Thread cutter | Spiral Tap | Roll tap | Tap for pipes | Spiral Tap |
Hole type | For blind hole | For through hole | For through hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole | For through hole / For blind hole | For through hole | For through hole / For blind hole | For blind hole | For blind hole | For blind hole | For through hole / For blind hole | For blind hole | For through hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole | For blind hole | For through hole | - | - | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For blind hole | For through hole / For blind hole | For through hole / For blind hole | For blind hole |
Coating Y/N | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available | Available |
Coating Type | Other | TiN | Other | TiN | TiCN | TiAlN | TiCN | TiCN | TiCN | TiN | TiN | TiCN | Nitriding Treatment | Nitriding Treatment | TiAlN | TiN | TiN | TiCN | TiCN | TiAlN | TiAlN | TiN | TiCN | CrN | TiAlN | Nitriding Treatment | DLC | For High Hardness (Silicon Group) / Other | Other | TiCN / Other | TiN | TiCN | TiCN | TiCN | TiAlN | TiCN | TiN | TiAlN | Nitriding Treatment | Nitriding Treatment | Nitriding Treatment | Other | Other | TiN | Other |
Overall Length (L)(mm) | 34 ~ 250 | 34 ~ 175 | 34 ~ 120 | 34 ~ 95 | 30 ~ 220 | 40 ~ 105 | 40 ~ 120 | 70 ~ 75 | 59 ~ 109 | 46 ~ 88 | 40 ~ 120 | 30 ~ 62 | 58 ~ 105 | 58 ~ 101 | 58 ~ 73 | 46 ~ 150 | 46 ~ 150 | 46 ~ 82 | 46 ~ 82 | 60 ~ 120 | 62 ~ 89 | 30 ~ 105 | 46 | 52 | 46 ~ 82 | 39 ~ 58 | 57 ~ 92 | 40 | 70 | 40 ~ 105 | 80 ~ 150 | 30 ~ 82 | 60 ~ 200 | 62 | 45 | 40 ~ 105 | 40 ~ 105 | 58 ~ 120 | 58 ~ 105 | 64 ~ 105 | 64 ~ 105 | 46 ~ 95 | 80 ~ 150 | 100 ~ 150 | 80 ~ 200 |
Loading...
Filter by:
Stock
Screw Types
Screw size (Nominal)
Pitch (P), Number of Threading(mm)
Chamfer threads (Lcf)
Tool Material Type
work material
Tap Type
Hole type
Coating Y/N
Coating Type
Overall Length (L)(mm)
Brand
CAD data type