Point Taps（Screw size (Nominal)：M16）

Data to be displayed: 30; 45; 60

Sort by:

Shipping Days	All Same day 2 Days or Less 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less

?* Information on days to ship and prices

Promotional pricing

Point Tap Series, for General, EX-POT

OSG

Suited for materials that leave coil shaped connected cutting dust that is in general use such as carbon steel, alloyed steel, and non-ferrous metals. Reliably Pushes Cutting Debris Forward Removing Concerns of Debris Interference

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	32.29 €
	Special price
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

SANDVIK CoroTap 100 Cutting Tap with Straight Flutes

SANDVIK

Select to compare

Configure now
Min. Shipping Days ：	5 Days

Promotional pricing

Point Tap Series, for Difficult-to-Machine Material, CPM-POT

OSG

Workpiece material is suitable for through hole drilling of about 20 ~ 45 HRC hardness of the tempered material or high-carbon steel, tool steel, alloy steel forging

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	55.47 €
	Special price
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

A Tap Series for Pipes Point Tap A-POT

OSG

Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Point taps with points grooves that are used in through holes.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	56.61 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Carbide Tap for Ultra High Hardness Steel UH-CT

YAMAWA MFG

[SKD material] [Prehardened] Ideal for tapping 55 to 60 HRC (Max: 63 HRC). The machined length of the screw is 1.5 D or less, and the biting length is 5 threads for long life. We recommend using the maximum value 6H female thread bore for the pilot hole diameter.

Select to compare

Configure now
Starting from^∗ ：	494.91 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Point Tap Series, Tin Coated, TIN-POT

OSG

Though workpiece can be widely applied, it is suitable for high speed tapping of through holes, such as tempered material, and especially stainless steel

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	56.27 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Point Tap Series, High Speed Synchronizing Taps, Long Shank, HS-LT-RFT

OSG

Suited for through thread cutting using machinery equipped with complete lead feeding mechanisms.

Select to compare

Configure now
Starting from^∗ ：	85.04 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Tap with Nickel Base Alloy ZEN-P

YAMAWA MFG

A type for machining nickel-base alloys, made from a nickel principal component for corrosion and heat resistance that is significantly superior to that of steel.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	124.65 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Tap insert

FEIN

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	312.32 €
Min. Shipping Days ：	7 Days

*Unit price with basic configuration

MT Series High-Speed Steel Point Tap

MISUMI

[New Item] A universal tap that can accommodate a wide range of work materials from general steel to aluminum and stainless steel.
The unique edge shape suppresses the collapse of the internal thread and eliminates the trouble of tapping.
[Slide Discount] Great deals are available on the purchase of more than 5 pieces.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	26.81 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

Point Tap Series, TIN Coating, Long Shank, TIN-LT-POT

OSG

Though workpiece can be widely applied, it is suitable for high speed tapping of through holes, such as tempered material, and especially stainless steel

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	82.91 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Point Tap Series For Stainless Steel Use EX-SUS-POT

OSG

Offers superb sharpness and durability. Can be used to drill holes in difficult-to-cut stainless steel.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	35.48 €
	Special price
Min. Shipping Days ：	Same day

*Unit price with basic configuration

Point Tap Series, Long Shank for Stainless Steel, EX-LT-SUS-POT

OSG

Shows the great sharpness and durability when used in through holes of machinability bad stainless steel

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	70.89 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Point Tap Series, General Homo Treatment, EX-H-POT

OSG

Used in cases such as insufficient protruding length of the threaded portion of the standard point-tap

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	34.44 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Point Tap Series, General Long Shank, EX-LT-POT

OSG

Used in cases such as insufficient protruding length of the threaded portion of the standard point-tap

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	48.06 €
	Special price
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Point Tap Series, for Deep Holes, EX-DH-POT

OSG

Suitable for through holes with extra long threads and materials that easily suffer sticking.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	36.95 €
	Special price
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Promotional pricing

Stainless Steel Point Tap SU+PO / SU-PO

YAMAWA MFG

Point tap for through-hole machining with extremely viscous or work-hardened work material.
[Features]
Optimal blade design is suitable for machining chrome steel, molybdenum steel, and stainless steel.
· Capable of machining both synchronously and asynchronously.
· Machining speed of 10 m/min or less is recommended.
[Applications]
· Ideal for machining through-holes with chrome steel, molybdenum steel, and stainless steel.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	59.90 €
	Special price
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Promotional pricing

Point Tap For High Carbon Steel HC+PO / HC-PO

YAMAWA MFG

It is suitable for tapping high carbon steel such as S55C.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	62.39 €
	Special price
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Short Point Tap for Deep Holes S-PO

YAMAWA MFG

A tap with short thread length effective for deep screw tapping of 2.5 times nominal diameter or more.
[Features]
· Short thread length gives low frictional resistance.
· Good supply of cutting oil is effective for deep thread machining to 2.5 times the nominal diameter or more.
· Oxide treatment (OX treatment) applied to prevent welding.
[Applications]
· Optimal for deep thread machining to 2.5 times the nominal diameter or more.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	50.87 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Point Tap for Difficult-to-Cut Materials EH-PO

YAMAWA MFG

Suitable for tapping high-hardness steels of 35 to 45 HRC such as high carbon steel, alloy steel forgings, tempering material, mold material, etc.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	72.74 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration

Point Tap Series, General Homo Treatment Long Shank, EX-LT-H-POT

OSG

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	54.47 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

A Tap Series Point Tap Long Shank A-LT-POT

OSG

Has stable chip extraction and can be used for various work materials in a wide range of cutting areas and machines. Point taps with points grooves that are used in through holes.

Select to compare

Configure now
Starting from^∗ ：	69.69 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

CoroTap 200 3 × DN Point Tap JIS EP0DM

SANDVIK

[Features]
·Wide selection of power strip for different work materials
·For work materials with long cutting chips

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	104.37 €
Min. Shipping Days ：	5 Days

*Unit price with basic configuration

SG Point Tap SGPO

NACHI(FUJIKOSHI)

[Features]
・ A tap for through-holes, supporting various cutting speeds, machinery, and work materials.

Select to compare

Configure now
Starting from^∗ ：	118.69 €
Min. Shipping Days ：	6 Days

*Unit price with basic configuration

Long-Shank Short-Point Spiral Tap For Stainless Steel LS-SU-S-PO

YAMAWA MFG

[Features]
· A long-shank point tap for machining through holes into stainless steel—a material which tends to become viscous when machining—as well as chrome steels and molybdenum steels.
· Can also be used for deep tapping operations.

Volume Discount

Select to compare

Configure now
Starting from^∗ ：	112.75 €
Min. Shipping Days ：	8 Days

*Unit price with basic configuration


Brand
Product Series
Starting from^∗
Min. Shipping Days
Screw Types
Screw size (Nominal)
Pitch (P), Number of Threading(mm)
Chamfer threads (Lcf)
Tool Material Type
work material
Tap Type
Hole type
Coating Y/N
Coating Type
Overall Length (L)(mm)

	Select to compare Promotional pricing	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare Promotional pricing	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare	Select to compare
Brand	OSG	SANDVIK	OSG	OSG	YAMAWA MFG	OSG	OSG	YAMAWA MFG	FEIN	MISUMI	OSG	OSG	OSG	OSG	OSG	OSG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	YAMAWA MFG	OSG	OSG	SANDVIK	NACHI(FUJIKOSHI)	YAMAWA MFG
Product Series	Point Tap Series, for General, EX-POT	SANDVIK CoroTap 100 Cutting Tap with Straight Flutes	Point Tap Series, for Difficult-to-Machine Material, CPM-POT	A Tap Series for Pipes Point Tap A-POT	Carbide Tap for Ultra High Hardness Steel UH-CT	Point Tap Series, Tin Coated, TIN-POT	Point Tap Series, High Speed Synchronizing Taps, Long Shank, HS-LT-RFT	Tap with Nickel Base Alloy ZEN-P	Tap insert	MT Series High-Speed Steel Point Tap	Point Tap Series, TIN Coating, Long Shank, TIN-LT-POT	Point Tap Series For Stainless Steel Use EX-SUS-POT	Point Tap Series, Long Shank for Stainless Steel, EX-LT-SUS-POT	Point Tap Series, General Homo Treatment, EX-H-POT	Point Tap Series, General Long Shank, EX-LT-POT	Point Tap Series, for Deep Holes, EX-DH-POT	Stainless Steel Point Tap SU+PO / SU-PO	Point Tap For High Carbon Steel HC+PO / HC-PO	Short Point Tap for Deep Holes S-PO	Point Tap for Difficult-to-Cut Materials EH-PO	Point Tap Series, General Homo Treatment Long Shank, EX-LT-H-POT	A Tap Series Point Tap Long Shank A-LT-POT	CoroTap 200 3 × DN Point Tap JIS EP0DM	SG Point Tap SGPO	Long-Shank Short-Point Spiral Tap For Stainless Steel LS-SU-S-PO
Starting from^∗	32.29 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	-	55.47 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	56.61 € *Unit price with basic configuration Volume Discount	494.91 € *Unit price with basic configuration	56.27 € *Unit price with basic configuration Volume Discount	85.04 € *Unit price with basic configuration	124.65 € *Unit price with basic configuration Volume Discount	312.32 € *Unit price with basic configuration Volume Discount	26.81 € *Unit price with basic configuration Volume Discount	82.91 € *Unit price with basic configuration Volume Discount	35.48 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	70.89 € *Unit price with basic configuration Volume Discount	34.44 € *Unit price with basic configuration Volume Discount	48.06 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	36.95 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	59.90 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	62.39 € Special price *Unit price with basic configuration Promotional pricing Volume Discount	50.87 € *Unit price with basic configuration Volume Discount	72.74 € *Unit price with basic configuration Volume Discount	54.47 € *Unit price with basic configuration Volume Discount	69.69 € *Unit price with basic configuration	104.37 € *Unit price with basic configuration Volume Discount	118.69 € *Unit price with basic configuration	112.75 € *Unit price with basic configuration Volume Discount
Min. Shipping Days	6 Days	5 Days	6 Days	6 Days	8 Days	6 Days	6 Days	8 Days	7 Days	5 Days	6 Days	Same day	6 Days	6 Days	6 Days	8 Days	6 Days	8 Days	8 Days	8 Days	6 Days	6 Days	5 Days	6 Days	8 Days
Screw Types	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	-	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter	Meter
Screw size (Nominal)	M16	M16	M16	M16	M16	M16	M16	M16	M16	M16	M16	M16	M16	M16	M16	M16	M16	M16	M16	M16	M16	M16	M16	M16	M16
Pitch (P), Number of Threading(mm)	1 ～ 2	-	1.5 ～ 2	1 ～ 2	1.5 ～ 2	1.5 ～ 2	1.5 ～ 2	1.5 ～ 2	-	1.5 ～ 2	1.5 ～ 2	1.5 ～ 2	2	1.5 ～ 2	1 ～ 2	1.5 ～ 2	1 ～ 2	1.5 ～ 2	1.5 ～ 2	1.5 ～ 2	1.5 ～ 2	1 ～ 2	2	1.5 ～ 2	2
Chamfer threads (Lcf)	5P	-	5P	5P	5P	5P	6P	4.5P	-	5 P	5P	4P	4P	5P	5P	4P	5P	5P	5P	4.5P	5P	5P	-	5	5P
Tool Material Type	Vanadium High-Speed Steel	-	Powder high-speed steel	Powder high-speed steel	Carbide	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Powder high-speed steel	-	Cobalt HSS	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	Vanadium High-Speed Steel	-	High-speed steel	High-speed steel	Cobalt HSS	Vanadium High-Speed Steel	Powder high-speed steel	-	High-speed steel	High-speed steel
work material	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	-	High Carbon Steel (C with a content over 0.45%)[◎] / Quenched and tempered steel (25 to 35 HRC)[◎] / Quenched and tempered steel (35 to 45 HRC)[◎] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Nickel-based alloy (Inconel, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	High Hardness Steel (50-60 HRC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Steel casting (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[◎] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	-	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[◎] / Steel casting (SC)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass cast iron (BsC)[◎] / Bronze (Pb)[◎] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[◎] / Magnesium Alloy (MC)[◎] / Zinc Alloy Casting (ZDC)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Stainless Steel (JIS-SUS)[◎] / Copper (Cu)[◎] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[◎]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[◎] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Steel casting (SC)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Ductile Cast Iron (FCD)[○]	Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Ductile Cast Iron (FCD)[○]	High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Copper (Cu)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] / Thermoplastic plastic (vinyl chloride, nylon, etc.)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[◎] / Medium carbon steel (carbon content 0.25 to 0.45%)[◎] / High Carbon Steel (C with a content over 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (JIS-SUS)[◎] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] / Titanium Alloy (Ti-6Al-4V, etc)[○]	-	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Quenched and tempered steel (35 to 45 HRC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○]	Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Stainless Steel (JIS-SUS)[○]
Tap Type	Point tap	-	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	-	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap	Point tap
Hole type	For through hole	-	For through hole	For through hole	For through hole / For blind hole	For through hole	For through hole	For through hole	-	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	For through hole	-	For through hole	For through hole
Coating Y/N	N/A	-	N/A	Available	Available	Available	Available	N/A	-	N/A	Available	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	N/A	Available	Available	Available	Available
Coating Type	Non-Coated	-	Non-Coated	Other	TiAlN	TiN	TiN	-	-	Non-Coated	TiN	Non-Coated	Non-Coated	Non-Coated	Non-Coated	Non-Coated	-	-	-	-	Non-Coated	Other	TiCN	TiCN	Other
Overall Length (L)(mm)	95	102 ～ 110	95	95	95	95	150	95	-	95	150	95	200	95	120 ～ 250	95	95	95	95	95	150	150 ～ 200	95	95	150 ～ 200

Filter by:

Stock

- Show only stock items
Clear

Screw Types
- Meter
- Unified
- Whitworth
- Sewing Machine
Clear

Screw size (Nominal)
No0UN

No.10-32UNF

No.10-24UNC

No.2-56UNC

No.4-48UNF

No.5-44UNF

No.5-40UNC

No.6-40UNF

No.6-32UNC

No.8-36UNF

No.8-32UNC

1UN

G 1"

M1

No1UN

W1

1"1/2UN

W1"1/2

1"1/4UN

W1"1/4

W1"1/8

1/2UN

G 1/2

UNC 1/2

UNF 1/2

W1/2

1/2-20UNF

1/2-13UNC

1/2W12

1/4UN

G 1/4

SM1/4

UNC 1/4

UNF 1/4

W1/4

1/4-28UNF

1/4-20UNC

1/4W20

G 1/8

SM1/8

W1/8

M1.1

M1.2

M1.4

M1.6

M1.7

M1.8

M2

No2UN

M2.2

M2.3

M2.5

M2.6

M3

No3UN

STI M3

3/4UN

G 3/4

UNC 3/4

UNF 3/4

W3/4

3/4-16UNF

3/4-10UNC

3/4W10

3/8UN

G 3/8

UNC 3/8

UNF 3/8

W3/8

3/8-24UNF

3/8-16UNC

3/8W16

M3 - M10

M3 - M12

SM3/16

W3/16

3/16W24

SM3/32

M3.5

M4

No4UN

STI M4

№4-40UNC

M4.5

M5

No5UN

STI M5

№5-40UNC

5/8UN

UNC 5/8

UNF 5/8

W5/8

5/8-18UNF

5/8-11UNC

5/8W11

M5 - M12

5/16UN

UNC 5/16

UNF 5/16

W5/16

5/16-24UNF

5/16-18UNC

5/16W18

M5.5

M6

No6UN

STI M6

№6-32UNC

M7

7 execution M3 - M12

7/8UN

UNC 7/8

UNF 7/8

W7/8

7/8-14UNF

7/8-9UNC

7/16UN

UNC 7/16

UNF 7/16

7/16-20UNF

7/16-14UNC

7/16W14

M8

MF8

No8UN

STI M8

№8-32UNC

M9

9/16UN

9/16-18UNF

9/16-12UNC

SM9/32

SM9/64

M10

MF10

No10UN

STI M10

№10-32UNF

№10-24UNC

M11

SM11/64

M12

MF12

Mf12

No12UN

STI M12

M12 x 1.5

M13

M14

MF14

M15

SM15/64

M16

MF16

Mf16

M16 x 1.5

M17

M18

MF18

M19

M20

MF20

Mf20

M20 x 1.5

M22

M23

M24

M25

Mf25

M25 x 1.5

M26

M27

M28

M30

M32

Mf32

M33

M35

M36

M39

M42

M45

M48
Clear

Pitch (P), Number of Threading(mm)
0.25

0.3

0.35

0.4

0.45

0.5

0.6

0.7

0.75

0.8

0.9

1

1.25

1.5

1.75

2

2.5

3

3.5

4

4.5

5

6

7

8

9

10

11

12

13

14

16

18

20

24

28

32

36

40

44

48

56

64

72

80
Clear

Chamfer threads (Lcf)
2.5P

4P

4.5P

5

5 P

5P

6P

24P
Drawing

Clear

Tool Material Type
- High-speed steel
- Cobalt HSS
- Powder high-speed steel
- Carbide
- Vanadium High-Speed Steel
Details

Clear

work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless Steel (JIS-SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
Clear

Tap Type
- Point tap
- Hand Tap
Clear

Hole type
- For through hole
- For blind hole
Clear

Coating Y/N
- Available
- N/A
Clear

Coating Type
- TiAlN
- TiCN
- TiN
- Non-Coated
- Other
Details

Clear

Overall Length (L)(mm)
30

32

33

34

35

36

39

40

41

42

44

45

46

48

50

51

52

53

55

56

58

59

60

62

63

65

66

70

72

75

80

82

85

88

89

90

95

100

102

105

110

112

115

120

125

130

135

140

145

150

155

160

165

175

180

185

200

250

300
Drawing

Clear

Brand

- MISUMI (1)
- Cost Efficient Products ()
- OSG (13)
- YAMAWA MFG (7)
- SANDVIK (2)
- NACHI(FUJIKOSHI) (1)
- FEIN (1)
- WERA (0)
- BERNSTEIN AG (0)
- RUKO (0)
- STAHLWILLE (0)
- SKC (0)
- TRUSCO NAKAYAMA (0)
- GEDORE (0)
- HAZET (0)
- REX TOOLS (0)
Clear

CAD data type

- 2D
- 3D
Clear

Point Taps（Screw size (Nominal)：M16）

Point Tap Series, for General, EX-POT

SANDVIK CoroTap 100 Cutting Tap with Straight Flutes

Point Tap Series, for Difficult-to-Machine Material, CPM-POT

A Tap Series for Pipes Point Tap A-POT

Carbide Tap for Ultra High Hardness Steel UH-CT

Point Tap Series, Tin Coated, TIN-POT

Point Tap Series, High Speed Synchronizing Taps, Long Shank, HS-LT-RFT

Tap with Nickel Base Alloy ZEN-P

Tap insert

MT Series High-Speed Steel Point Tap

Point Tap Series, TIN Coating, Long Shank, TIN-LT-POT

Point Tap Series For Stainless Steel Use EX-SUS-POT

Point Tap Series, Long Shank for Stainless Steel, EX-LT-SUS-POT

Point Tap Series, General Homo Treatment, EX-H-POT

Point Tap Series, General Long Shank, EX-LT-POT

Point Tap Series, for Deep Holes, EX-DH-POT

Stainless Steel Point Tap SU+PO / SU-PO

Point Tap For High Carbon Steel HC+PO / HC-PO

Short Point Tap for Deep Holes S-PO

Point Tap for Difficult-to-Cut Materials EH-PO

Point Tap Series, General Homo Treatment Long Shank, EX-LT-H-POT

A Tap Series Point Tap Long Shank A-LT-POT

CoroTap 200 3 × DN Point Tap JIS EP0DM

SG Point Tap SGPO

Long-Shank Short-Point Spiral Tap For Stainless Steel LS-SU-S-PO

Categories related to Point Taps

Betalningsmetod

Behovsstyrd tillverkning

Ändra vy

Certifikat

MISUMI världen över

Sociala medier

Juridiskt meddelande