Hand Taps（Tool Material Type：High-speed steel）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Hand Tap Series, for General, HT
OSG
High speed steel hand tap.
Working material: magnesium alloy casting (MC) compatible / zinc alloy casting (ZDC) compatible.- Volume Discount
Configure nowStarting from∗ ： 8.29 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Hand Tap HT (Cutting Tap)
YAMAWA MFG
Hand tap used for general tapping work.
[Features]
・ High blade tip strength makes it easy for regrinding.
・ More suitable for manual work compared to taps of other shapes.
・ 2 types are available, with 5P or 1.5P chamfered threads.
・ When machining a blind hole manually, finish machining with 1.5P is recommended after first machining with 5P.
・ Machining with mechanical machinery is also possible.
・ Has straight grooves out of consideration for cutting chip stow.
・ Suitable for work materials whose cutting chips are powder or small coiled close to the powder.
[Applications]
・ Ideal for threading SPC/SPH and other thin plates or SS400/S20 or below mild steel.- Volume Discount
- Stock
Configure nowStarting from∗ ： 8.02 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Insert Screw Tap Series, Hand Tap HL-HT
OSG
Used for female thread tapping in insertion of helical coil. Compared to ordinary taps of average size, the pitch is the same but outer diameter in just the inserting part is made larger.- Volume Discount
Configure nowStarting from∗ ： 12.11 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Insert Screw Tap Series, Hand Tap, Long Shank, HL-LT
OSG
Used for female thread tapping in insertion of helical coil. Compared to ordinary taps of average size, the pitch is the same but outer diameter in just the inserting part is made larger.- Volume Discount
Configure nowStarting from∗ ： 22.83 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Hand Tap Set (for metric screws / HSS-E)
TRUSCO NAKAYAMA
[Characteristics]
Can be used for both through holes and blind holes.
High-speed steel (HSS-E) tap set.
Work materials: general steel, low to medium carbon steel, alloy steel.- Volume Discount
Configure nowStarting from∗ ： 27.26 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Stainless Steel Hand Tap SU-HT
YAMAWA MFG
Hand tap suitable for machining extremely viscous or work-hardened work material.
[Features]
Optimal blade design is suitable for machining chrome steel, molybdenum steel, and stainless steel.
· 2 types are available, with 4P or 1.5P biting threads, to suit the application used.
· Capable of machining both synchronously and asynchronously.
· Machining speed of 5 m/min or less is recommended.
[Applications]
Ideal for machining with extremely viscous or work-hardened work materials such as chrome steel, molybdenum steel, and stainless steel.- Volume Discount
Configure nowStarting from∗ ： 8.89 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Hand Tap for Left-Hand Threads HT(LH)
YAMAWA MFG
It is suitable for threading for simple installation used for thin steel plates such as SPC and SPH and mild steel of SS400, S20 or less.- Volume Discount
Configure nowStarting from∗ ： 21.36 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Hexagonal Shank Tapping Drill
RUKO
[Features]
· Hexagonal shaft shank design enables mounting to cordless screwdriver.
· Enables hole punching and thread cutting work in iron plate, etc., without having to replace the drill.
[Applications]
· For drilling and creating/repairing screw threads.
· Work materials: Iron, aluminum, copper.Configure nowStarting from∗ ： 26.25 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Configure now
Starting from∗ ： 5.27 € Min. Shipping Days ： 3 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days |
| Specifications |
| Screw Types |
| Screw size (Nominal) |
| Pitch (P), Number of Threading(mm) |
| Chamfer threads (Lcf) |
| Tool Material Type |
| work material |
| Tap Type |
| Hole type |
| Coating Y/N |
| Coating Type |
| Overall Length (L)(mm) |
|
|
|
|
|
|
|
|
| |
| Brand | OSG | YAMAWA MFG | OSG | OSG | TRUSCO NAKAYAMA | YAMAWA MFG | YAMAWA MFG | RUKO | RUKO |
| Product Series | |||||||||
| Starting from∗ | 8.29 € *Unit price with basic configuration Volume Discount | 8.02 € *Unit price with basic configuration Volume Discount | 12.11 € *Unit price with basic configuration Volume Discount | 22.83 € *Unit price with basic configuration | 27.26 € *Unit price with basic configuration Volume Discount | 8.89 € *Unit price with basic configuration Volume Discount | 21.36 € *Unit price with basic configuration Volume Discount | 26.25 € *Unit price with basic configuration | 5.27 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days | Same day | Same day | Same day | 6 Days | Same day | Same day | Same day | 6 Days | 3 Days |
| Specifications |
| ||||||||
| Screw Types | Meter / Unified / Whitworth / Sewing Machine | Meter / Unified | Meter / Unified | Unified | Meter | Meter | Meter | Meter | Meter |
| Screw size (Nominal) | No0UN ～ M38 | No.10-24UNC ～ M22 | M2.5 ～ No8UN | No6UN | M5 ～ M8 | M3 ～ M6 | M2.5 ～ M8 | M6 | M2 |
| Pitch (P), Number of Threading(mm) | 0.25 ～ 80 | 0.6 ～ 2.5 | 0.45 ～ 32 | 32 | 0.8 ～ 1.25 | 0.5 ～ 1 | 0.35 ～ 0.75 | 1 | - |
| Chamfer threads (Lcf) | 1.5P ～ 9P | 1.5P ～ 5P | 5P | 1.5P | - | 1.5P ～ 4P | 5P | - | - |
| Tool Material Type | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel | High-speed steel |
| work material | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Magnesium Alloy (MC)[○] / Zinc Alloy Casting (ZDC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[◎] | Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[◎] | Low-Carbon Steel (carbon alloy less than 0.25%)[○] / Medium carbon steel (carbon content 0.25 to 0.45%)[○] / Alloy Steel (SCM)[○] / Steel casting (SC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (JIS-SUS)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Steel casting (SC)[○] | Medium carbon steel (carbon content 0.25 to 0.45%)[○] / High Carbon Steel (C with a content over 0.45%)[○] / Quenched and tempered steel (25 to 35 HRC)[○] / Tool Steel (Before SKD Hardening)[○] / Steel casting (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Aluminum Alloy Casting (AC, ADC)[○] / Zinc Alloy Casting (ZDC)[○] | Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass cast iron (BsC)[○] / Bronze (Pb)[○] / Aluminum Rolled Material (AL)[○] / Aluminum Alloy Casting (AC, ADC)[○] | - |
| Tap Type | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap | Hand Tap |
| Hole type | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | For through hole / For blind hole | - |
| Coating Y/N | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | - |
| Coating Type | Non-Coated | - | Non-Coated | Non-Coated | Non-Coated | - | - | Non-Coated | - |
| Overall Length (L)(mm) | 30 ～ 165 | 52 ～ 115 | 46 ～ 60 | 100 | 60 ～ 70 | 46 ～ 62 | 46 ～ 70 | 60 | - |
Loading...
Filter by:
Stock
-
- Show only stock items
-
Screw Types
- Meter
- Unified
- Whitworth
- Sewing Machine
-
Screw size (Nominal)
- No0UN
- No.10-32UNF
- No.10-24UNC
- No.4-48UNF
- No.4-40UNC
- No.5-40UNC
- No.6-32UNC
- No.8-32UNC
- M1
- W1"1/4
- 1"1/16UN
- W1/2
- 1/2-20UNF
- 1/2-13UNC
- 1/4-28UNF
- 1/4-20UNC
- W1/8
- M1.2
- M1.4
- M1.6
- M1.7
- M1.8
- M2
- M2.0
- M2.2
- M2.3
- M2.5
- M2.6
- M3
- M3.0
- 3/4-16UNF
- 3/4-10UNC
- 3/8UN
- 3/8-24UNF
- 3/8-16UNC
- M3 - M10
- M3 - M12
- M3.5
- M4
- M4.0
- No4UN
- M4.5
- M5
- M5.0
- 5/8-18UNF
- 5/8-11UNC
- M5 - M12
- 5/16UN
- 5/16-24UNF
- 5/16-18UNC
- M5.5
- M6
- M6.0
- No6UN
- M7
- 7 execution M3 - M12
- 7/16UN
- 7/16-20UNF
- 7/16-14UNC
- SM7/32
- M7.5
- M8
- No8UN
- M9
- SM9/64
- M9.5
- M10
- M11
- SM11/32
- M12
- Mf12
- No12UN
- M12 x 1.5
- M13
- M14
- M15
- M16
- Mf16
- M16 x 1.5
- M17
- M18
- M20
- Mf20
- M20 x 1.5
- M22
- M24
- Mf25
- M25 x 1.5
- M27
- M28
- M30
- Mf32
- M33
- M35
- M36
- M38
- M42
- M48
-
Pitch (P), Number of Threading(mm)
-
Chamfer threads (Lcf)
-
Tool Material Type
-
work material
- Low-Carbon Steel (carbon alloy less than 0.25%)
- Medium carbon steel (carbon content 0.25 to 0.45%)
- High Carbon Steel (C with a content over 0.45%)
- Alloy Steel (SCM)
- Stainless Steel (JIS-SUS)
- Quenched and tempered steel (25 to 35 HRC)
- Quenched and tempered steel (35 to 45 HRC)
- Quenched and tempered steel (45 to 55 HRC)
- High Hardness Steel (50-60 HRC)
- Tool Steel (Before SKD Hardening)
- Steel casting (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass cast iron (BsC)
- Bronze (Pb)
- Aluminum Rolled Material (AL)
- Aluminum Alloy Casting (AC, ADC)
- Magnesium Alloy (MC)
- Zinc Alloy Casting (ZDC)
- Titanium Alloy (Ti-6Al-4V, etc)
- Nickel-based alloy (Inconel, etc.)
- Thermosetting plastic (bakelite, phenol, etc.)
- Thermoplastic plastic (vinyl chloride, nylon, etc.)
-
Tap Type
-
Hole type
-
Coating Y/N
-
Coating Type
-
Overall Length (L)(mm)
Brand
-
- MISUMI (0)
- OSG (3)
- YAMAWA MFG (3)
- RUKO (2)
- TRUSCO NAKAYAMA (1)
- BERNSTEIN AG (0)
- STAHLWILLE (0)
- ESCO (0)
- ISHIHASHI (0)
- GEDORE (0)
- ENGINEER (0)
- HAZET (0)
- SKC (0)
- NACHI(FUJIKOSHI) (0)
- WERA (0)
- FEIN (0)
- REX TOOLS (0)
CAD data type
-
- 2D
- 3D
Categories related to Hand Taps
Betalningsmetod
Faktura
Förskottsbetalning
Behovsstyrd tillverkning
Certifikat
Copyright © MISUMI Corporation All Rights Reserved.