Screws and Accessories

Shipping Days	All Same day 2 Days or Less 3 Days or Less 4 Days or Less 5 Days or Less 6 Days or Less 7 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less

?* Information on days to ship and prices

• 

  T-slot Nut

  NEW STRONG

  -A bolt fixing nut for T-slots.
  -This product does not penetrate bolts so as not to damage the underside of the table T-slot.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	7.33 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  508 Nuts for T-slots (T-nuts)

  AMF

  Nuts for T-slots (T-nuts) tempered, strength class 10. The nuts for the T groove can only experience a full load when the screw connection exists over the entire length of the thread.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.75 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  T-Nuts for T-Slots

  GANTER

  T-Nuts GN 505 can be inserted vertically into a T-Slot like rhombus T-Nuts GN 508.1.
  When tightening the clamping bolt, the nut will be forced into a crosswise position by the applied torque and firmly anchored in the T-slot.
  This action is achieved by using T-nut type MB which is intentionally fitted with an overtight fit requiring a higher torque.
  To remove the bolt and T-nut a 90° anticlockwise turn is sufficient to withdraw the two components with the clamped workpiece.
  The clamping face of the T-nut is serrated to ensure that a possible plating coat in the T-slot is penetrated to establish a good electrical contact.
  

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.86 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Stopper Bolt (SSB-B)

  NABEYA

  For positioning the workpiece, or as a stopper, etc. The spherical part has been quenched. Excellent Abrasion Resistance.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	4.25 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  DIN 787 Bolts for T-slots

  AMF

  Bolts for T-slots Forged, T-slot guid-faces milled, rolled thread, AMF-symbol and strength class punched into head. M 6-M12 tempered to strength class 10.9, M14-M42 tempered to strength class 8.8 The product is available per 1 peace.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.19 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  DIN 6331 Collar nut

  AMF

  Collar nut height 1,5 dia. Tempered, tensile strength class 10. The product is available per 1 peace.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.06 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  DIN 6379 Studs

  AMF

  Studs Rolled thread. M 6-M12 tempered to strength class 10.9, M14-M42 tempered to strength class 8.8.
  The specially developed AMF-studs for clamping purposes are graduated by length according to DIN 323 series R10 figures. The product is available per 1 peace.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.16 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  T-Slot bolts for T-Nuts

  GANTER

  T-Slot bolts GN 505.4 can be inserted vertically into the slot. During tightening, the bolt is forced into the crosswise position and thus anchored in the slot. Conversely, the bolt is turned back during loosening and can then be removed.
  The clamping face of the bolt is serrated to ensure that the eloxal coating is broken up to establish a good electrical contact.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.40 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  T Slot Bolt

  SUPER TOOL

  [Features]
  · Special bolt made from precision forged carefully selected carbon steel.

  Select to compare

  Configure now
  Starting from∗ ：	10.78 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Double T-Slot Nut

  SUPER TOOL

  [Features]
  · For clamp (power clamp, mechabite clamps, etc.) T-groove mounting.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	16.90 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Hook Catch for Toggle Hook Clamp 6848

  NABEYA

  Receiving part for Toggle Hook Clamp 6848H, 6848V series. Also sold separately

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	22.10 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  [Steel] Spring Ejector Pin EA949RM-41

  ESCO

  【Product Specifications】
  ・Material-Body： steel (SCM435)Pin： steel (S45C), Spring： SUS304
  ・-41 to -43： round-tip type, -46 to -48： flat-tip type
  ・Use this tool for removing a workpiece or as a simplified shock absorber.
  ・The pin is fastened with a hexagonal nut and glue.
  ・A…M8
  ・B…7.6
  ・C…44
  ・D…9
  ・K…8

  Select to compare

  Configure now
  Starting from∗ ：	22.47 €
  Min. Shipping Days ：	9 Days

  *Unit price with basic configuration

• 

  510 Nuts for T-slots Rhombus

  AMF

  Nuts for T-slots Rhombus Tempered, for tensile strength classes see adjoining table. Lower load capacities compared with com parable sizes of DIN 508 due to reduced bearing surface in the T-slots. The product is available per 1 peace.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.66 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Clamping Stat Bolt (With Multiple Spanners)

  NEW STRONG

  The length of the threaded part at opposite ends is different. It is equipped with spanner. The bite of the T-slot nut can also be removed easily.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	7.55 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  T-slot Bolt

  NEW STRONG

  For press tool holders. Materials: EN 1.1191 Equiv., forgings, hardness: HRC 30 to 40, finish with black oxide layer.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	15.53 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  T-Nuts / GN 507 / M4, M5, M6, M8

  GANTER

  T-nuts GN 507 have been specially designed for use on extrusion rails. They are inserted from either end of the T-slot.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.06 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Toggle clamp spindle assemblies with protective neoprene tip

  GANTER

  The hexagon nuts are included.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.42 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  6332S Quick-action clamping nut without collar

  AMF

  Quick-action clamping nut without collar hardened and zinc-plated, strength class 6. The product is available per 1 peace.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.27 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  T-Nuts / Stainless Steel / GN 508 / M6, M8, M10, M12, M14, M16

  GANTER

  Stainless Steel-T-Nuts DIN 508 are also available without tapped hole.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.70 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Spherical Washer

  MISUMI

  Stable clamping is always attainable without being affected by the parallels of work pieces and bolts, etc.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	7.50 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  6334 Extension nut

  AMF

  Extension nut height 3,0 dia. Tempered, tensile strength class 10. The product is available per 1 peace.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.35 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  6486 T-slot cover

  AMF

  T-slot cover Made of aluminium profile.
  Cutting to the desired length is easily done with a fine saw blade. The product is available per 1 peace.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	36.31 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  DIN 787 Bolts for T-slots with hexagon nut DIN 6330B and washer DIN 6340

  AMF

  Bolts for T-slots complete with hexagon nut DIN 6330B and washer DIN 6340.
  Forged, milled T-groove, rolled thread, stamped with AMF logo and strength class. M6 to M12 hardened to strength class 10.9, M14 to M42 hardened to strength class 8.8. The product is available per 1 peace.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	11.52 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Stainless Steel-Clamping pads, adjustable

  GANTER

  Stainless Steel-Clamping pads GN 709.35 are used as mobile supports or as spring plungers for clamping workpieces. They can also be used as a back stop.
  The ball is limited to an angular movement of 9° only.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	56.96 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  T-Slot bolts

  GANTER

  [Specifications]
  ・Material: Heat-treatable Steel
  ・Slot flats milled
  ・Standard: DIN 787

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	9.16 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Workpiece supports (K0889)

  KIPP

  Material:
  Steel.
  Version:
  Case-hardened, black oxidised and ground.
  Note:
  These supports are placed under long or thin workpieces to prevent vibration or bending during milling, drilling, grinding or shaping operations.

  Select to compare

  Configure now
  Starting from∗ ：	413.40 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Stopper Bolt (SSB-A)

  NABEYA

  For positioning the workpiece, or as a stopper, etc. The spherical part has been quenched. Excellent Abrasion Resistance.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	3.41 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Black Oxide Flange Nut (S45C)

  NABEYA

  Flanged nut.
  [Features]
  · HRC30±5 quenching provides a long service life.
  [Application]
  · Optimal for tightening clamps.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	5.87 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  T Slot Nut (FTS Type)

  SUPER TOOL

  [Features]
  · Caulked to prevent the bolt from protruding and causing damage to the machine table.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	5.87 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  6340 Washer

  AMF

  Washer tempered (350 + 80 HV30) The product is available per 1 peace.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.96 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Clamping Pads Adjustable / GN 709.6 / M6, M8 / B, K, R

  GANTER

  Clamping pads GN 709.6 are also used in jig and fixture construction, for example for clamping workpieces, as movable bearing surface or as stop. The swivel-mounted ball compensates uneven and non-parallel contact surfaces by as much as 10°. It is also secured against further twisting.
  The O-ring holds the ball in position and prevents dirt from penetrating, resulting in a long service life and constant mobility.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	44.60 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Swing nuts, Steel

  GANTER

  In combination with grub screws (i.e. DIN 913 or DIN 6379) swing nuts GN 444.2 can be used together as swing bolts in varying lengths.
  In addition, used with a cap screw DIN 912, a swivelling clamping screw can be produced.
  Dimensions d2 ,d3 and s are identical to DIN 444.
  For stocking purposes cylinder head shoulder bolts GN 732 can be used for the sizes M8, M10 and M12.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	10.40 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Nuts similar to DIN 508 for Tee Slots DIN 650, Long Version, Black

  MAEDLER

  Material:
  Tempered steel, tensile strength 10, black.
  T-slot nuts according to the old standard DIN 508, but with double length.
  These nuts can be placed e.g. in the centre of two crossing slots.
  Suitable for T-slots DIN 650 / ISO 299.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	2.88 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  T-slot plate (K0952)

  KIPP

  Material:
  Carbon steel.
  
  Version:
  Black oxidised.
  Contact faces ground.
  

  Select to compare

  Configure now
  Starting from∗ ：	934.95 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Extension shafts (K0990)

  KIPP

  Material:
  Carbon steel.
  Version:
  Black oxidised.
  Note:
  For setting the clamping width.
  Supplied with union nut.
  The extension shafts can be combined as required.

  Select to compare

  Configure now
  Starting from∗ ：	107.57 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Stop sets (K0993)

  KIPP

  Material:
  Steel.
  Version:
  Swivel arm, black oxidised.
  Stop pin bright.
  Note:
  Stop set for direct fastening to jaws.The stop can be swivelled aside for machining the workpiece without losing the stop dimension.
  
  Supplied complete with attachment parts.

  Select to compare

  Configure now
  Starting from∗ ：	187.45 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  UNILOCK 5-axis basic module DUO Form A system size 80 mm (K1867)

  KIPP

  Material:
  Carbon steel.
  Version:
  Main body oxidised.
  Contact faces hardened and ground.
  Accessory:
  Clamping pins K0967, K0968, K0969, K1471.

  Select to compare

  Configure now
  Starting from∗ ：	1,509.95 €
  Min. Shipping Days ：	4 Days

  *Unit price with basic configuration

• 

  Eye Bolt

  NABEYA

  This is a lifting bolt.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	4.12 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Cam Clamp Set

  NABEYA

  A cam-shaped handle allows tool-less tightening. The handle is in a low position, meaning there are no concerns about interference with the upper part.

  Select to compare

  Configure now
  Starting from∗ ：	155.98 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Supporting Arm 6895

  NABEYA

  The clamping screw can be moved. Clamping screw and rubber cap attached.

  Select to compare

  Configure now
  Starting from∗ ：	111.47 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Stud Bolt (SUS316)

  NABEYA

  SUS stud bolt.
  [Features]
  · Rust-resistant SUS.
  [Application]
  · Can be used in environments where water is used.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	23.76 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Knurled Lock Nut

  NABEYA

  SUM22/quenched HRC35-40 knurled lock nut.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	46.45 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Cam Center Clamp Set

  NABEYA

  A cam-shaped handle allows tool-less tightening. Good operability is ensured by the tightening on the clamp lever.

  Select to compare

  Configure now
  Starting from∗ ：	355.61 €
  Min. Shipping Days ：	7 Days

  *Unit price with basic configuration

• 

  Swing Bolt

  NABEYA

  SBS/SBH: SUM22/SBS-S: Swing bolt made of SUS316.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	29.15 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  A-Type V Block【2 Pieces Per Package】

  NABEYA

  The pair difference of the V groove with respect to the two reference planes a and c is MC0.05 and GS/FS0.03.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	86.54 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

Loading...