FUTAMURA MACHINES & TOOLS Lathe Jigs（Tip Carbide Insert (Y/N)：N/A）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Rolling Center 100 With Stickers
FUTAMURA MACHINES & TOOLS
[Features]
· Small accessory cutting adequate products, -17A is a fine type and suitable for thread cutting and end surface processing.
· 3 bearing including 2 needle bearings and 1 thrust bearing are used inside this product, and the main body diameter is designed to be small.
· As the head part of the main body is within 60 degrees from the center end tip, there is no interference for progress of the tool bit.
· V seal is adopted and suitable when cutting oil is used.Starting from∗ ： 489.05 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Rolling Center SR
FUTAMURA MACHINES & TOOLS
[Features]
· Since the processing heat generated by the elongation of the workpiece is absorbed by the flat spring built into the center, there is no distortion of a workpiece and its finishing accuracy improves.
· The thrust load generated by the elongation of the workpiece is also absorbed to the slide mechanism, and it is designed not to apply load to the bearing directly.Starting from∗ ： 752.54 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Rolling Center 100
FUTAMURA MACHINES & TOOLS
[Features]
· Small accessory cutting adequate products, -17A is a fine type and suitable for thread cutting and end surface processing.
· 2 needle bearings and 3 thrust bearings are used inside this product, and the main body diameter is designed to be small.
· As the head part of the main body is within 60 degrees from the center end tip, there is no interference for progress of the tool bit.Starting from∗ ： 373.93 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Rolling Center NC70
FUTAMURA MACHINES & TOOLS
[Features]
· The product is designed by focusing on the super high speed rotation (7000 min-1) and high accuracy (TIR 0.003).
· Carbide insert is attached on the tip part to withstand abrasion and friction due to super high speed rotation. (A type)
· By using the combined angular bearing (3 places) and two types of bearings of needle bearings inside this product, it is finely designed and assembled to withstand rigidity.
· The use of a unique labyrinth mechanism (non-contact) as a measure to prevent immersion when cutting oil is used eliminates wear, friction, and power loss, reduces the temperature rise of the machine, and improves accuracy and reliability of lifespan.Starting from∗ ： 1,317.34 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Rolling Center NCF
FUTAMURA MACHINES & TOOLS
[Features]
· Angular bearing, thrust bearing and needle roller bearing are used for smooth rotation torque.
· Suitable for screw cutting and edge surface processing, as A, C and E-type are fine type.
· The labyrinth mechanism (non-contact) is adopted for the immersion prevention measures when cutting oil is used.Starting from∗ ： 757.24 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Rolling center NCF-N
FUTAMURA MACHINES & TOOLS
[Features]
· Forcing nut is equipped on the rear part of the main body to be able to remove from the front part of the tailstock.
· Inside this product, combined angular bearing (3 pcs) and needle bearing are used, which makes smooth rotation torque.
· A and C type are fine type, suitable for screw cutting and edge surface processing.
· The labyrinth mechanism (non-contact) is adopted for the immersion prevention measures when cutting oil is used.Starting from∗ ： 1,004.96 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Rolling Center HB
FUTAMURA MACHINES & TOOLS
Large bearings have been adopted and the main unit O.D. and center shaft diameter have been made thicker in order to withstand larger loads than a standard typeStarting from∗ ： 1,296.74 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Rolling Center RST
FUTAMURA MACHINES & TOOLS
[Features]
· Inside this product, there are two ball bearings on M.T No. 1 and No. 2, and 1 thrust bearing. 3 types of each of taper roller bearing, thrust bearing and ball bearing are used for M.T No. 3 to No. 7.Starting from∗ ： 427.52 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Work Driving Center DK Claw Fixed
FUTAMURA MACHINES & TOOLS
[Features]
· Ideal for gear cutting, spline processing, keyway processing, and woodworking.
· There will be no need of chuck if this device is used.
· As the processing items are maintained in both centers, the finishing of the processed items are the best.
· Single-action detaching / attaching of processed items is possible.
· By using the extraction nut, it is easy to remove from the machine.Starting from∗ ： 982.79 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Work Driving Center HD
FUTAMURA MACHINES & TOOLS
[Features]
· Center runout (maximum) against M.T. is TIR 0.01.
· Hydraulic mechanism is adopted to the claw operation and the edge surface is maintained evenly by independent operation of the claw.
· The claw and the center shaft are made of high-speed steel to achieve high durability.Starting from∗ ： 1,662.71 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Work Driving Center, HD-Type Replacing Claw
FUTAMURA MACHINES & TOOLS
When the claw of the work driving center is worn and damaged, promptly replace the claw before using.Starting from∗ ： 250.86 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
Umbrella Type Rotation Center BRC
FUTAMURA MACHINES & TOOLS
[Features]
· Used for lathes and cylindrical grinding machines.
· Used for center pushing tool of pipe type, ring type and thin processed items.
· Inside this product, 3 types, each one of taper roller bearing, thrust bearing and ball bearing, are prepared.Starting from∗ ： 553.72 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Type |
| Mounting type |
| Compatible Chuck Nominal Size |
| Jaw Height(mm) |
| Compatible Manufacturer |
| Chuck Outer Diameter(mm) |
| Number of Jaws |
| Shank MT No |
| Tip Carbide Insert (Y/N) |
| Tip Width Across Flat(mm) |
| Auxiliary Jig Type |
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | FUTAMURA MACHINES & TOOLS | FUTAMURA MACHINES & TOOLS | FUTAMURA MACHINES & TOOLS | FUTAMURA MACHINES & TOOLS | FUTAMURA MACHINES & TOOLS | FUTAMURA MACHINES & TOOLS | FUTAMURA MACHINES & TOOLS | FUTAMURA MACHINES & TOOLS | FUTAMURA MACHINES & TOOLS | FUTAMURA MACHINES & TOOLS | FUTAMURA MACHINES & TOOLS | FUTAMURA MACHINES & TOOLS |
| Product Series | ||||||||||||
| Starting from∗ | 489.05 € *Unit price with basic configuration | 752.54 € *Unit price with basic configuration | 373.93 € *Unit price with basic configuration | 1,317.34 € *Unit price with basic configuration | 757.24 € *Unit price with basic configuration | 1,004.96 € *Unit price with basic configuration | 1,296.74 € *Unit price with basic configuration | 427.52 € *Unit price with basic configuration | 982.79 € *Unit price with basic configuration | 1,662.71 € *Unit price with basic configuration | 250.86 € *Unit price with basic configuration | 553.72 € *Unit price with basic configuration |
| Min. Shipping Days ： | 8 Days | 8 Days | 8 Days | 8 Days | 8 Days | 8 Days | 8 Days | 8 Days | 8 Days | 8 Days | 8 Days | 8 Days |
| Type | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center | Rotation Center / Lathe Center |
| Mounting type | - | - | - | - | - | - | - | - | - | - | - | - |
| Compatible Chuck Nominal Size | - | - | - | - | - | - | - | - | - | - | - | - |
| Jaw Height(mm) | - | - | - | - | - | - | - | - | - | - | - | - |
| Compatible Manufacturer | - | - | - | - | - | - | - | - | - | - | - | - |
| Chuck Outer Diameter(mm) | - | - | - | - | - | - | - | - | - | - | - | - |
| Number of Jaws | - | - | - | - | - | - | - | - | - | 5 ～ 8 | - | - |
| Shank MT No | MT2 ～ MT5 | MT3 ～ MT5 | MT2 ～ MT5 | MT3 ～ MT5 | MT3 ～ MT5 | MT3 ～ MT5 | MT5 ～ MT6 | MT1 ～ MT6 | MT3 ～ MT4 | MT4 ～ MT5 | - | MT2 ～ MT6 |
| Tip Carbide Insert (Y/N) | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A | N/A |
| Tip Width Across Flat(mm) | - | - | - | - | - | - | - | - | - | - | - | - |
| Auxiliary Jig Type | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Filter by:
Narrow search by specifying spec./dim.
-
Type
- Soft Jaw
- Soft Jaw Molding Jig / Soft Jaw Molding Holder
- Lathe Chuck
- Rotation Center / Lathe Center
- Scroll Chuck Handle
- Jaw Nut
- Tailstock / Auxiliary Jig
-
Mounting type
- Serrated Type
- Upper and Lower Divided Jaw Type
-
Compatible Chuck Nominal Size
- B-212
- B-210
- B-208
- B-206
- B-205
- B-21
- B-15
- B-12
- B-10
- B-08
- B-06
- 4
- 5
- Type B 05
- Type HJ 5
- 5、6、8
- 5～8
- 6
- Type B 06
- Type GO 6
- 6、8、10
- 6～10
- 7
- 7・8
- 8
- Type B 08
- Type H 8-46
- 8、10、12
- 8～12
- 9
- 9・10
- 10
- Type B 10
- Type GO 10
- Type H 10-67
- 12
- Type B 12
- Type HJ 12
- 14～16
- 15
- Type B 15/18
- 15～22
- 16
- 18
- 21
- Type B 21/24
- Type HJ 24
- 80
- 110
- 130
- 140
- 160
- 165
- 200
- Type B 204/205
- Type B 206
- Type B 208
- Type B 210
- Type B 212
- Type B 215
- 250
- 385
- 400
- 460
- 500
-
Jaw Height(mm)
-
Compatible Manufacturer
- Kitagawa
- Howa
- Nikko
- Matsumoto
- Hitachi
- Victor
- Other
-
Chuck Outer Diameter(mm)
-
Number of Jaws
-
Shank MT No
-
Tip Carbide Insert (Y/N)
- Yes
- N/A
-
Tip Width Across Flat(mm)
-
Auxiliary Jig Type
- Die Holder
- Dog
Narrow search by specifying Brand
-
- MISUMI (0)
- SANYOSEISAKUSYO (14)
- FUTAMURA MACHINES & TOOLS (12)
- KABUTO MFG (8)
- TAKURA KOGU (3)
- TRUSCO NAKAYAMA (2)
- NSK (1)
- ARM SANGYO (0)
- NEW STRONG (0)
- KITAGAWA IRON WORKS (0)
- KAWASHIMO (0)
- OKUKAWATEKOUSYO (0)
- KOBAYASHI IRON WORKS (0)
- NORELEM (0)
- THE CUT (0)
- TEIKOKU_CHUCK (0)
- GIGA SELECTION (0)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Lathe Jigs
Betalningsmetod
Faktura
Förskottsbetalning
Behovsstyrd tillverkning
Certifikat
Copyright © MISUMI Corporation All Rights Reserved.