NAKAMURA MFG Torque Wrenches
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
Kanon Stamp Type Marking Torque Wrench N-MQLK Type
NAKAMURA MFG
[Features]
· Never miss a place where bolts have not been tightened. The bolt head is marked "Pon". Commercially available socket-compatible type.
· Since marking is done automatically, there is no need to perform marking work after tightening. Truly the last word in error-proofing.
· Marking is performed after the completion of tightening, serving as "the evidence of proper tightening."
· The torque wrench's socket supports one commercially available deep socket. (Note: Mounting hole machining is required.)
· The ink used is an oil-based ink made by Shachihata, so the marks are non-erasable.
· For each ink charge, sockets of 8 to 13 mm in size can be filled approximately 1,500 times. The 14-24 mm products allow marking approximately 6,000 times.
· Red ink is included as an accessory.
· Its simple structure makes maintenance easy
· The accuracy is guaranteed up to ±3%.Starting from∗ ： 439.41 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Starting from∗ ： 144.48 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Preset Torque Wrench With Grip
NAKAMURA MFG
[Features]
· The handle has a grip on it.
· You can set required torque easily by hand.
· You can switch sockets to the wrench with a variety of bolts and nuts.Starting from∗ ： 181.07 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Preset Torque Wrench With Grip (Replaceable Head Type)
NAKAMURA MFG
[Features]
· The handle has a grip on it.
· You can set required torque easily by hand.
· Replaceable head type.
· This single tool can be used for tightening as wrench, offset wrench, hex wrench or ratchet, depending on your requirement.Starting from∗ ： 148.98 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Kanon Large Hub Nut Torque Wrench N-QLK-LR Type
NAKAMURA MFG
[Features]
· Ideal for tightening bolts on large tires for large trucks/ buses, etc.
· There is a square drive on both sides, so the right and left screws can be tightened with one torque wrench.
· A ratchet type that enhances work efficiency and is suitable for repetitive work.
· It activates only when fastened in arrow direction.
· The accuracy is guaranteed up to ±3%.Starting from∗ ： 847.03 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
SCK Type Wrench Head
NAKAMURA MFG
Wrench replacement head for head replaceable type torque wrench.
[Features]
· It can be reversed, so left tightening is also possible.
[Applications]
· SCK type replacement head.
· For tightening against walls or in narrow spaces of machinery.Starting from∗ ： 32.12 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
![[Kanon] Replaceable Head Preset Torque Wrench](//uk.misumi-ec.com/linked/material/fs/NKM1/PHOTO/N900LCK.jpg?$product_view_b$)
[Kanon] Replaceable Head Preset Torque Wrench
NAKAMURA MFG
[Features]
· A single torque wrench that can be used as a wrench, box wrench, hex wrench, or ratchet according to the task.
[Applications]
· For work requiring various tightening torques to be supported.Starting from∗ ： 161.45 € Min. Shipping Days ： 9 Days *Unit price with basic configuration
-
Starting from∗ ： 291.03 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
![[Kanon] Open Wrench with Hook Spanner](//uk.misumi-ec.com/linked/material/fs/NKM1/PHOTO/95-N450QLK.jpg?$product_view_b$)
[Kanon] Open Wrench with Hook Spanner
NAKAMURA MFG
[Features]
· Preset type ideal for fastening nuts and round rods with a key groove.
· Preset type torque wrench N-QLK with open wrench and hook wrench attached.
· Ideal for fastening nuts and round rods with a key groove.
· Also useful for setting the tooling to be used for machine tools and attaching blades.
· Used for piping work and maintenance in thermal and nuclear power stations throughout Japan.
· The accuracy is guaranteed up to ±3%.Starting from∗ ： 428.53 € Min. Shipping Days ： 14 Days *Unit price with basic configuration
-
Starting from∗ ： 188.00 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
![[Kanon] Dial Gauge Torque Wrench (with Indicator)](//uk.misumi-ec.com/linked/material/fs/NKM1/PHOTO/223005160649_001.jpg?$product_view_b$)
[Kanon] Dial Gauge Torque Wrench (with Indicator)
NAKAMURA MFG
Comes with a compact oval grip that fits well in the hand. Inspection and general work are made much easier.
[Features]
· With an easily visible dial type indicator that offers excellence in measurement and accuracy.
· Robust guard is attached on the dial side.
· Slim, compact and lightweight main body improves work efficiency.
· N6 to N200TOK use a flat grip, allowing for better stability than the conventional round grip, reducing fatigue due to work.
· 2 types are available: a standard type and a type with an easily readable pointer.Starting from∗ ： 214.38 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Ratchet Style Preset Torque Wrench
NAKAMURA MFG
[Features]
· You can set required torque easily by hand.
· You can switch sockets to use the wrench with a variety of bolts and nuts.Starting from∗ ： 418.55 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Monkey Torque Wrench
NAKAMURA MFG
[Features]
· This monkey torque wrench uses a worm with no backlash.
[Applications]
· Use it for tightening in locations with torque regulations.Starting from∗ ： 341.63 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Kanon Insulated Ratchet Type Single-Function Torque Wrench N-QSPK-CE Type
NAKAMURA MFG
[Features]
· A special dual-layer design for the insulating material prevents accidents with electric shock.
· A special dual-layer coating of insulating material protects the operator from electric shock.
· Since the upper and lower layers of the dual-layer coating of insulating material have been color-coded, it is easy to see at a glance the extent of damage to the coating.
· The withstand voltage is within 1,000 VAC.
· Ideal for servicing, maintenance, and inspection of electric cars.
· The insulated coating socket is also a custom order product.
· The accuracy is guaranteed up to ±3%.- Volume Discount
Starting from∗ ： 227.96 € Min. Shipping Days ： 45 Days *Unit price with basic configuration
-
Kanon Locking Type Preset Torque Wrench N-KQLK Type
NAKAMURA MFG
[Features]
· The torque adjusting ring is secured using a dedicated tool. Torque value cannot be changed while working.
· The torque value cannot be changed without a dedicated tool.
· There are no torque value fluctuations during tightening work.
· A ratchet type that enhances work efficiency and is suitable for repetitive work.
· The accuracy is guaranteed up to ±3%.Starting from∗ ： 196.34 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Kanon Large Hub Nut Torque Wrench N - QLK-LR Type Dedicated Head
NAKAMURA MFG
[Features]
· Ideal for tightening bolts on large tires for large trucks/ buses, etc.
· There is a square drive on both sides, so the right and left screws can be tightened with one torque wrench.
· A ratchet type that enhances work efficiency and is suitable for repetitive work.
· It activates only when fastened in arrow direction.
· The accuracy is guaranteed up to ±3%.Starting from∗ ： 158.00 € Min. Shipping Days ： 11 Days *Unit price with basic configuration
-
Kanon Wrench Type Single-Function Torque Wrench N-SPK Type
NAKAMURA MFG
[Features]
· Click. Safety work with a beep indicating the completion of tightening. Wrench type suitable for assembly-line work.
· A single-function torque wrench for which the width across flats and torque values are determined for use at a constant torque value.
· Suitable for fastening many identical bolts (nuts) with the same torque value in assembly-line work.
· Can be used effectively in narrow spaces, such as the gaps in machinery.
· While it activates only when fastened in arrow direction, it can be used for left screws by flipping over.
· The accuracy is guaranteed up to ±3%.
· H types with grips are also available.Min. Shipping Days ： 8 Days -
Kanon Box End Type Single-Function Type Torque Wrench N - RSPK Type
NAKAMURA MFG
[Features]
· A-OK even in narrow places where a wrench cannot be inserted. Ring type with no mistakes in torque.
· Ideal for fastening in narrow places where a wrench cannot be inserted.
· A single-function torque wrench for which the width across flats and torque values are determined for use at a constant torque value.
· Suitable for fastening many identical bolts (nuts) with the same torque value in assembly-line work.
· The accuracy is guaranteed up to ±3%.
· H types with grips are also available.- Volume Discount
Starting from∗ ： 92.24 € Min. Shipping Days ： 8 Days *Unit price with basic configuration
-
N-QLK Open Wrench with Hook Spanner
NAKAMURA MFG
[Features]
· Preset type ideal for fastening nuts and round rods with a key groove.
· Preset type torque wrench N-QLK with open wrench and hook wrench attached.
· Ideal for fastening nuts and round rods with a key groove.
· Also useful for setting the tooling to be used for machine tools and attaching blades.
· Used for piping work and maintenance in thermal and nuclear power stations throughout Japan.
· The accuracy is guaranteed up to ±3%.Starting from∗ ： 286.69 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Kanon Ratchet Type Single-Function Torque Wrench N-QSPK Type
NAKAMURA MFG
[Features]
· Set the torque value constant. The ratchet mechanism with square drive enhances work efficiency.
· A ratchet type that can be quickly tightened at a constant torque, making it suitable for repetitive work.
· The operation when releasing the torque value is the same as for the N-SPK type.
The accuracy is guaranteed up to ±3%.Starting from∗ ： 92.24 € Min. Shipping Days ： 13 Days *Unit price with basic configuration
-
Kanon Plate Type Torque Wrench N-FK Type
NAKAMURA MFG
[Features]
· Ideal for general tightening and inspection. A popular type fan-shaped plate scale.
· A simple construction that lasts long due to little abrasion.
· Robust and easy to handle.Starting from∗ ： 107.38 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Kanon Plate Type Torque Wrench N-FK Type with Indicator
NAKAMURA MFG
[Features]
· Ideal for general tightening and inspection. A popular type fan-shaped plate scale.
· A simple construction that lasts long due to little abrasion.
· Robust and easy to handle.Starting from∗ ： 147.06 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Kanon Replaceable Head Single-Function Torque Wrench N-SPCK Type
NAKAMURA MFG
[Features]
· If set to a fixed torque value, the extensive variety of head replacements enable smooth work.
· The head can be exchanged with a ratchet, wrench, offset wrench, and hex wrench.
· By exchanging the head, various bolts (nuts) can be tightened within the capacity range.
· A single function type suitable for repetitive work with the same torque value.
· The accuracy is guaranteed up to ±3%.
· Types with grips are H type and A type.- Volume Discount
Starting from∗ ： 90.38 € Min. Shipping Days ： 16 Days *Unit price with basic configuration
-
HCK Hexagonal-Shaped Head
NAKAMURA MFG
[Features]
· A single torque wrench that can be used to tighten various hexagonal bolts.
[Applications]
· HCK type replacement head.Starting from∗ ： 45.10 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Starting from∗ ： 77.82 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
RCK Type, Box End Head
NAKAMURA MFG
Box end replacement head for head replaceable type torque wrench.
[Features]
· Replacement head (RCK type) for Kanon head replaceable torque wrench.
[Applications]
· For tightening against walls or in narrow spaces of machinery.
· It can be reversed, so left tightening is also possible.- Volume Discount
Starting from∗ ： 32.30 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Starting from∗ ： 332.43 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
Kanon Torque Gauge N-SGK Type with Indicator
NAKAMURA MFG
[Features]
· A 3-way chuck which can hold anything. Provides a highly accurate torque value.
· Small, lightweight, and convenient to carry.
· The tip is a three-jaw chuck (made of metal). Securely holds either round or square objects.
· Knurling allows easy gripping.
· The stepped scale face structure helps prevent scratches.
· Measurement is possible in either direction, left or right.
· The N-SGK torque gauge includes scales on both the front and side surfaces, with the same results in both locations.
· The accuracy is guaranteed up to ±3%.Starting from∗ ： 320.54 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Starting from∗ ： 216.27 € Min. Shipping Days ： 40 Days *Unit price with basic configuration
-
Starting from∗ ： 278.16 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
-
Starting from∗ ： 193.02 € Min. Shipping Days ： 40 Days *Unit price with basic configuration
-
Starting from∗ ： 185.26 € Min. Shipping Days ： 40 Days *Unit price with basic configuration
-
Starting from∗ ： 200.77 € Min. Shipping Days ： 40 Days *Unit price with basic configuration
-
Starting from∗ ： 272.39 € Min. Shipping Days ： 7 Days *Unit price with basic configuration
![[Kanon] Replaceable Head Preset Torque Wrench](http://uk.misumi-ec.com/linked/material/fs/NKM1/PHOTO/N900LCK.jpg?$product_view_b$)
![[Kanon] Open Wrench with Hook Spanner](http://uk.misumi-ec.com/linked/material/fs/NKM1/PHOTO/95-N450QLK.jpg?$product_view_b$)
![[Kanon] Dial Gauge Torque Wrench](http://uk.misumi-ec.com/linked/material/fs/NKM1/PHOTO/223005160526_001.jpg?$product_view_b$)
![[Kanon] Dial Gauge Torque Wrench (with Indicator)](http://uk.misumi-ec.com/linked/material/fs/NKM1/PHOTO/223005160649_001.jpg?$product_view_b$)
| Brand |
|---|
| Product Series |
| Starting from∗ |
| Min. Shipping Days ： |
| Specifications |
| Product Type |
| Torque adjustment range(N・m) |
| Two-plane dimensions(mm) |
| Insertion Angle(mm) |
| Minimum graduation(N・M) |
| Head Replaceable |
| Replaceable Head Type |
| Overall Length(mm) |
| Load direction |
| Torque Precision(±%) |
| Head width(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | NAKAMURA MFG | NAKAMURA MFG | NAKAMURA MFG | NAKAMURA MFG | NAKAMURA MFG | NAKAMURA MFG | NAKAMURA MFG | NAKAMURA MFG | NAKAMURA MFG | NAKAMURA MFG | NAKAMURA MFG | NAKAMURA MFG | NAKAMURA MFG | NAKAMURA MFG | NAKAMURA MFG | NAKAMURA MFG | NAKAMURA MFG | NAKAMURA MFG | NAKAMURA MFG | NAKAMURA MFG | NAKAMURA MFG | NAKAMURA MFG | NAKAMURA MFG | NAKAMURA MFG | NAKAMURA MFG | NAKAMURA MFG | NAKAMURA MFG | NAKAMURA MFG | NAKAMURA MFG | NAKAMURA MFG | NAKAMURA MFG | NAKAMURA MFG | NAKAMURA MFG | NAKAMURA MFG |
| Product Series | Kanon Insulated Ratchet Type Single-Function Torque Wrench N-QSPK-CE Type | Kanon Large Hub Nut Torque Wrench N - QLK-LR Type Dedicated Head | Kanon Box End Type Single-Function Type Torque Wrench N - RSPK Type | Kanon Ratchet Type Single-Function Torque Wrench N-QSPK Type | Kanon Replaceable Head Single-Function Torque Wrench N-SPCK Type | QCK Type Ratchet Head for Kanon Head Replaceable Torque Wrench | ||||||||||||||||||||||||||||
| Starting from∗ | 439.41 € *Unit price with basic configuration | 144.48 € *Unit price with basic configuration | 181.07 € *Unit price with basic configuration | 148.98 € *Unit price with basic configuration | 847.03 € *Unit price with basic configuration | 32.12 € *Unit price with basic configuration | 161.45 € *Unit price with basic configuration | 291.03 € *Unit price with basic configuration | 428.53 € *Unit price with basic configuration | 188.00 € *Unit price with basic configuration | 214.38 € *Unit price with basic configuration | 418.55 € *Unit price with basic configuration | 341.63 € *Unit price with basic configuration | 227.96 € *Unit price with basic configuration Volume Discount | 196.34 € *Unit price with basic configuration | 158.00 € *Unit price with basic configuration | - | 92.24 € *Unit price with basic configuration Volume Discount | 286.69 € *Unit price with basic configuration | 92.24 € *Unit price with basic configuration | 107.38 € *Unit price with basic configuration | 147.06 € *Unit price with basic configuration | 90.38 € *Unit price with basic configuration Volume Discount | 45.10 € *Unit price with basic configuration | 77.82 € *Unit price with basic configuration | 32.30 € *Unit price with basic configuration Volume Discount | 332.43 € *Unit price with basic configuration | 320.54 € *Unit price with basic configuration | 216.27 € *Unit price with basic configuration Volume Discount | 278.16 € *Unit price with basic configuration | 193.02 € *Unit price with basic configuration | 185.26 € *Unit price with basic configuration | 200.77 € *Unit price with basic configuration | 272.39 € *Unit price with basic configuration |
| Min. Shipping Days ： | 7 Days | 5 Days | 6 Days | 6 Days | 7 Days | 6 Days | 9 Days | 7 Days | 14 Days | 6 Days | 7 Days | 6 Days | 6 Days | 45 Days | 7 Days | 11 Days | 8 Days | 8 Days | 7 Days | 13 Days | 5 Days | 7 Days | 16 Days | 6 Days | Same day | 7 Days | 6 Days | 7 Days | 40 Days | 7 Days | 40 Days | 40 Days | 40 Days | 7 Days |
| Specifications |
| |||||||||||||||||||||||||||||||||
| Product Type | Monkey Type | Dial Type | Preset Mold | Preset Mold | Dial Type | Replacement Head | Preset Mold | - | Preset Mold | Dial Type | Dial Type | Preset Mold | Monkey Type | Monkey Type | Monkey Type | Replacement Head | Single Function Type | Single Function Type | Preset Mold | Single Function Type | Dial Type | Dial Type | Single Function Type | Replacement Head | Replacement Head | Replacement Head | Dial Type | Dial Type | - | - | - | - | - | Replacement Head |
| Torque adjustment range(N・m) | 10–50 ～ 40～140 | 2 to 6 ～ 200～1500 | 2 to 6 ～ 40～140 | 2 to 6 ～ 40～140 | 100~700 ～ 100~1000 | - | 20~90 | 2 to 6 ～ 40～280 | 10～45 | 0.6～6 ～ 50～550 | 0.6～6 ～ 50～550 | 80～360 | 20~90 | 7～25 ～ 20~100 | 10–50 ～ 40–200 | - | 0.5～3 ～ 45～220 | 0.5~3.5 ～ 14～73 | 10–50 | 2 to 6 | 0.1～0.70 ～ 70～420 | 10–90 ～ 70～420 | 2 to 6 ～ 4 to 12 | - | - | - | 0.005~0.06 ～ 0.1~1.5 | 0.001～0.009 ～ 0.1～0.9 | 2 to 6 ～ 60～280 | 2 to 6 ～ 40～280 | 2 to 6 ～ 60～280 | 3.5～19 ～ 30～160 | 4~21 ～ 14～73 | - |
| Two-plane dimensions(mm) | - | - | - | - | - | - | - | - | - | - | - | - | 10–30 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 10 ～ 41 | 10 ～ 30 | - |
| Insertion Angle(mm) | - | - | 6.35 ～ 12.7 | - | - | - | - | - | - | 6.35 ～ 19.05 | 6.35 ～ 19.05 | 19.05 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Minimum graduation(N・M) | 0.5 ～ 1 | 0.1 ～ 10 | 0.1 ～ 1 | 0.1 ～ 1 | 5 | - | 1 | - | - | 0.1 ～ 10 | 0.1 ～ 10 | 2 | 1 | - | 0.5 ～ 2 | - | - | - | - | - | 0.02 ～ 20 | 2 ～ 10 | - | - | - | - | 0.001 ～ 0.02 | 0.0002 ～ 0.02 | - | - | - | - | - | - |
| Head Replaceable | N/A | Available | - | - | Available | Available | Available | - | - | N/A | N/A | - | - | N/A | N/A | Available | N/A | N/A | N/A | N/A | N/A | N/A | Available | Available | Available | Available | - | - | - | - | - | - | - | - |
| Replaceable Head Type | - | - | - | - | - | Open head | - | - | - | - | - | - | - | - | - | Ratchet Head | - | - | - | - | - | - | - | Hex Head | Ratchet Head | Ring Head | - | - | - | - | - | - | - | - |
| Overall Length(mm) | 254 ～ 392 | 173 ～ 1700 | 186 ～ 392 | 173 ～ 365 | 1315 ～ 1538 | - | 325 | - | 292 | 260 ～ 1110 | 260 ～ 1110 | 678 | 386 | 232 ～ 352 | 254 ～ 478 | - | 152 ～ 597 | 175 ～ 353 | 282 ～ 330 | 174 | 132 ～ 853 | 388 ～ 853 | 161 | - | - | - | 106 ～ 134 | 106 ～ 134 | - | - | - | - | - | - |
| Load direction | - | - | - | - | - | - | - | - | - | Left/Right | Left/Right | Right | Right | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Torque Precision(±%) | 3 | - | 3 | 3 | 3 | - | - | - | 3 | 3 | 3 | 3 | 4 | 3 | 3 | 4 | 3 | 3 | 3 | - | 3 | 3 | - | - | - | - | 3 | 3 | - | - | - | - | - | - |
| Head width(mm) | - | - | - | - | - | 7 ～ 65 | - | - | - | - | - | - | 59 | - | - | - | - | - | - | - | - | - | - | 2.5 ～ 19 | - | 7 ～ 65 | - | - | - | - | - | - | - | - |
![[Kanon] Replaceable Head Preset Torque Wrench](http://uk.misumi-ec.com/linked/material/fs/NKM1/PHOTO/N900LCK.jpg?$product_view_c$)
![[Kanon] Open Wrench with Hook Spanner](http://uk.misumi-ec.com/linked/material/fs/NKM1/PHOTO/95-N450QLK.jpg?$product_view_c$)
![[Kanon] Dial Gauge Torque Wrench](http://uk.misumi-ec.com/linked/material/fs/NKM1/PHOTO/223005160526_001.jpg?$product_view_c$)
![[Kanon] Dial Gauge Torque Wrench (with Indicator)](http://uk.misumi-ec.com/linked/material/fs/NKM1/PHOTO/223005160649_001.jpg?$product_view_c$)
Loading...
Filter by:
Stock
-
- Stock Items Included
Narrow search by specifying spec./dim.
-
Product Type
- Digital Type
- Dial Type
- Preset Mold
- Monkey Type
- Single Function Type
- Replacement Head
- Other
- Torque Wrench Checker
-
Torque adjustment range(N・m)
- 0.0005～0.0045
- 0.001～0.009
- 0.001～0.01
- 0.0015～0.015
- 0.002～0.015
- 0.0025～0.025
- 0.003～0.03
- 0.004～0.03
- 0.005～0.05
- 0.005~0.06
- 0.006～0.06
- 0.008～0.075
- 0.01～0.12
- 0.01～0.15
- 0.02～0.15
- 0.02～0.24
- 0.03～0.24
- 0.04～0.36
- 0.05～0.6
- 0.06～0.6
- 0.08～0.4
- 0.1~0.7
- 0.1～0.70
- 0.1～0.9
- 0.1~1.5
- 0.2 to 1.5
- 0.3～3.0
- 0.4~2
- 0.5～1.50
- 0.5～3
- 0.5~3.5
- 0.6～6
- 1-9
- 1-5
- 1–3
- 1–5
- 1 to 6
- 1–6
- 1–12
- 1.5-30
- 1.5～8
- 2-25
- 2-12
- 2 to 6
- 2 to 9
- 2–10
- 2～12
- 2.5-25
- 3 to 13
- 3~13
- 3 to 15
- 3～23
- 3～60
- 3.5～19
- 4 to 12
- 4 to 20
- 4–20
- 4~21
- 4～40
- 5-50
- 5-25
- 5 - 25
- 5 to 25
- 5~25
- 5.0～25.0
- 5–30
- 5–35
- 5~45
- 5～46
- 5 - 50
- 5–50
- 5.0～50.0
- 5–60
- 6～30
- 6.7-135
- 6.8-54.2
- 7～23
- 7～25
- 8～38
- 8–40
- 9～42
- 10-350
- 10-200
- 10-60
- 10-50
- 10～45
- 10 to 50
- 10–50
- 10.0～50.0
- 10–70
- 10–90
- 10～92
- 10~100
- 10.0～100.0
- 10～135
- 12 max.
- 12～60
- 13～67
- 14～73
- 15 max.
- 15-85
- 15-35
- 15–60
- 16
- 19 to 110
- 19～110
- 20-120
- 20-100
- 20~90
- 20 to 100
- 20~100
- 20.0～100.0
- 20~110
- 20~120
- 20～130
- 20~140
- 20.0 to 200.0
- 20–200
- 21～105
- 24～120
- 25-130
- 25～115
- 27～135
- 27.1-135.6
- 28 to 210
- 28～210
- 30 to 140
- 30~140
- 30.0～140.0
- 30～160
- 30～180
- 30~190
- 30~300
- 40-200
- 40~100
- 40～140
- 40~180
- 40 to 200
- 40–200
- 40.0～200.0
- 40～210
- 40.0～280.0
- 40～280
- 40.0～420.0
- 40～420
- 42～120
- 42～210
- 45～220
- 50-200
- 50–150
- 50～280
- 50～550
- 50.0～560.0
- 54.2-271.2
- 60-320
- 60-300
- 60～280
- 60 to 300
- 60～300
- 60 to 420
- 60.0～420.0
- 60～440
- 70～350
- 70～420
- 70.0～700.0
- 80～360
- 80～400
- 80～560
- 85
- 85/103/108/120
- 100 max.
- 100-1000
- 100 to 1,000
- 100~500
- 100.0～550.0
- 100～550
- 100～560
- 100 to 700
- 100~700
- 100 to 850
- 100～850
- 100.0～850.0
- 100~1000
- 100.0～1000.0
- 103
- 108
- 140～700
- 140～980
- 150.0～750.0
- 150～800
- 170～850
- 200.0～1000.0
- 200～1400
- 200～1500
- 200～2100
- 300-800
- 300.0～1400.0
- 500 max.
- 500.0～2100.0
- 700 to 2,100
- 800-2000
- 1300 max.
- 4000 max.
- 54000 max.
-
Two-plane dimensions(mm)
-
Insertion Angle(mm)
-
Minimum graduation(N・M)
-
Head Replaceable
-
Replaceable Head Type
- Open head
- Ring Head
- Ratchet Head
- Square Screwdriver Head
- Female Ratchet Head
- Hex Head
- Adjustable Head
- Hook Head
- Other
-
Overall Length(mm)
- 1,314
- 1,388
- 1,538
- 2,064
- 19.0
- 20.5
- 23.4
- 25
- 35
- 40
- 41
- 42
- 43
- 44
- 45
- 49
- 50
- 52
- 53
- 54
- 55
- 55.8
- 56
- 57
- 58
- 59
- 61
- 62
- 63
- 64
- 65
- 66
- 68
- 73
- 74
- 75
- 76
- 77
- 78
- 79
- 80
- 82
- 84
- 91
- 94
- 95
- 96
- 98
- 99
- 100
- 101
- 102
- 105
- 106
- 108
- 115
- 125
- 132
- 134
- 135
- 140
- 145
- 148
- 152
- 160
- 161
- 170
- 173
- 173.5
- 174
- 175
- 180
- 186
- 190
- 193
- 195
- 197
- 198
- 200
- 203
- 205
- 208
- 211
- 213
- 216
- 218
- 220
- 221
- 222
- 224
- 225
- 228
- 229
- 230
- 232
- 234
- 235
- 237
- 238
- 240
- 242
- 248
- 250
- 252
- 253
- 254
- 256
- 260
- 264
- 268
- 273
- 275
- 282
- 283
- 284.5
- 285
- 286
- 289
- 290
- 291
- 292
- 295
- 298
- 300
- 303
- 308
- 310
- 315
- 319
- 320
- 325
- 330
- 333
- 335
- 338
- 342
- 343
- 346
- 348
- 350
- 352
- 353
- 355
- 360
- 365
- 369
- 370
- 372
- 380
- 385
- 386
- 387
- 388
- 389
- 390
- 392
- 394
- 397
- 400
- 403
- 404
- 405
- 410
- 420
- 421
- 423
- 432
- 435
- 438
- 440
- 441
- 442
- 443
- 445
- 449
- 450
- 455
- 457
- 463
- 465
- 467
- 478
- 480
- 483
- 487
- 489
- 490
- 495
- 500
- 505
- 510
- 511
- 514.5
- 515
- 519
- 520
- 526
- 530
- 535
- 543
- 545
- 555
- 565
- 570
- 580
- 585
- 587
- 595
- 597
- 607
- 628
- 630
- 645
- 648
- 655
- 660
- 678
- 683
- 695
- 696
- 716
- 771
- 825
- 853
- 865
- 890
- 908
- 940
- 945
- 950
- 955
- 995
- 1050
- 1051
- 1086
- 1088
- 1100
- 1110
- 1175
- 1178
- 1189
- 1206
- 1230
- 1260
- 1267
- 1271
- 1315
- 1342
- 1360
- 1387
- 1388
- 1410
- 1417
- 1490
- 1504
- 1515
- 1538
- 1640
- 1700
- 1740
- 1787
- 1895
- 2140
- 3034
-
Load direction
-
Torque Precision(±%)
-
Head width(mm)
Narrow search by specifying Brand
-
- ESCO (61)
- NAKAMURA MFG (34)
- TOHNICHI MFG (31)
- MAEDAKINNZOKU (18)
- KTC(KYOTO TOOL) (13)
- GEDORE (6)
- STAHLWILLE (5)
- MATATAKITOYO (4)
- FACOM (4)
- HAZET (3)
- WERA (3)
- ARC GREATTOOL (2)
- NORELEM (2)
- SIGNET (2)
- AMF (1)
- BESTTOOL (1)
- CIMCO (1)
- BERNSTEIN AG (1)
- E VALUE (1)
- HIOS (1)
- IFM ELECTRONIC (1)
- KNIPEX (1)
- NIPPEI KIKI (1)
- SK 11 (1)
- SROAD (1)
- SUPER TOOL (1)
Narrow search by specifying CAD data type
-
- 2D
- 3D
Categories related to Torque Wrenches
Betalningsmetod
Faktura
Förskottsbetalning
Behovsstyrd tillverkning
Certifikat
Copyright © MISUMI Corporation All Rights Reserved.