One-Touch Couplings（Applicable Fluid：Air Page 4）

?* Information on days to ship and prices

• 

  Tube Fitting PP Type Union Straight for Clean Environments

  NIHON PISCO

  [Features]
  · The main body uses PP resin suitable for clean environments.
  · EPDM is utilized in the seal.
  · FKM and NBR types are available as optional extras.
  · PP or SUS304 can be selected for the screw element.
  · Use of oil permitted.
  · Plastic body is clear colored to allow water flow to be observed.
  · Two packaging specifications--normal packaging and clean room packaging--are available according to the desired application.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.23 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Tube Fitting PP Type Different Diameters Union Y for Clean Environments

  NIHON PISCO

  [Features]
  · The main body uses PP resin suitable for clean environments.
  · EPDM is utilized in the seal.
  · FKM and NBR types are available as optional extras.
  · PP or SUS304 can be selected for the screw element.
  · Use of oil permitted.
  · Plastic body is clear colored to allow water flow to be observed.
  · Two packaging specifications--normal packaging and clean room packaging--are available according to the desired application.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	12.46 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Tube Fitting for General Piping - PT Jack

  NIHON PISCO

  [Features]
  · One-touch fitting for general pneumatic pipes.
  · Variied lineup.
  · The take-off angle of the resin body can be changed after mounting.
  · Centralized piping is enabled.
  · Light gray types, and clean room packaged types available as options.
  · Clean room packaging specifications define the use of fluorinated grease.
  · After purification with clean air, the item is packaged in an ISO Class 6-equivalent clean room that has been purified with clean air.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.91 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Tube Fitting for General Piping - Branch Tee

  NIHON PISCO

  [Features]
  • One-touch fitting for general pneumatic pipe use
  • Wide variety of options available
  • In-situ adjustment of the resin body take-off angle
  • Enables centralized piping
  • Light gray and clean room packaged options available
  • Fluorinated grease used to meet clean room packaging specifications
  • Item is package in an ISO 6 clean room, following purification with clean air

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.95 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  General Piping, Tube Fitting, Plug

  NIHON PISCO

  A one-touch fitting for general piping, with a variety of types available.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.85 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Tube Fitting for General Piping - Female Straight

  NIHON PISCO

  A wide variety of single-action fittings for general piping.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.49 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Tube Fitting Branch Female Universal Elbow for General Piping

  NIHON PISCO

  [Features]
  · One-touch fitting for general pneumatic pipes.
  · Rich lineup.
  · The take-off angle of the resin body can be changed after mounting.
  · Centralized piping is supported.
  · Light gray and clean room packaged types are available as options.
  · Clean room packaging specification uses fluorinated grease.
  · After purification with clean air, the item is packaged in an ISO Class 6-equivalent clean room that has been purified with clean air.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.06 €
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Tube Fitting Union A for General Piping

  NIHON PISCO

  [Features]
  · One-touch fitting for general pneumatic pipes.
  · Rich lineup.
  · The take-off angle of the resin body can be changed after mounting.
  · Centralized piping is supported.
  · Light gray and clean room packaged types are available as options.
  · Clean room packaging specification uses fluorinated grease.
  · After purification with clean air, the item is packaged in an ISO Class 6-equivalent clean room that has been purified with clean air.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.90 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Tube Fitting Union Straight for Standard Pipe

  NIHON PISCO

  Many types of one-touch fittings for standard piping.
  
  [Features]
  · One-touch fitting for general pneumatic pipes.
  · Can change the take-off angle of the resin body after mounting.
  · Diverse lineup.
  · Centralized piping is supported

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.55 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Tube Fitting Different Diameter Triple Double for Standard Pipe

  NIHON PISCO

  Many types of one-touch fittings for standard piping.
  
  [Features]
  · One-touch fitting for general pneumatic pipes.
  · Can change the take-off angle of the resin body after mounting.
  · Diverse lineup.
  · Centralized piping is supported

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.96 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Tube Fitting for General Piping - Bulkhead Union

  NIHON PISCO

  A wide variety of single action fittings for general piping.
  
  [Features]
  · Single action fitting for general pneumatic piping.
  · After mounting, the resin unit's removal angle can be changed.
  · An extensive lineup of products.
  · Allows for centralized piping.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.03 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  for General Piping, Tube Fitting Mini-Type Branch Tee

  NIHON PISCO

  Volume successfully reduced by 40% versus the standard type.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.57 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  for General Piping, Tube Fitting Mini-Type Plug

  NIHON PISCO

  Volume successfully reduced by 40% versus the standard type.

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.73 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  for General Piping, Tube Fitting Mini-Type Union Tee

  NIHON PISCO

  Volume successfully reduced by 40% versus the standard type.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.47 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Rotating Element Piping, High Rotary Joint Elbow

  NIHON PISCO

  One-touch fitting for high speed-speed rotation part of general air pressure piping.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	61.68 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Rotating Element Piping, Low Rotary Joint Straight

  NIHON PISCO

  One-touch fitting for swinging part and rotating part.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	14.01 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Tube Fitting Brass Elbow for Sputter Resistance

  NIHON PISCO

  The main body and release ring are made of brass for superior flame retardancy and sputtering resistance.
  
  [Features]
  · Available sealing rubber materials include HNBR, FKM, and NBR.
  · Ideal for environments exposed to sparks.
  · Release ring made of brass offers excellent flame retardancy and sputter resistance.
  · The type with a cover prevents dust and sputter from getting through to the internal fittings.
  · An optional sputter cover prevents fine sparks from entering.
  · By using a release ring cover (CS – sold separately), sparks that penetrate through the gap between the release ring and the tube cannot get close.

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.59 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Tube Fitting Brass Straight for Sputter Resistance

  NIHON PISCO

  The main body and release ring are made of brass for superior flame retardance and sputtering resistance.
  
  [Features]
  · Available sealing rubber materials include HNBR, FKM, and NBR.
  · Ideal for environments where exposure to sparks may occur.
  · Release ring made of brass offers excellent flame retardance and sputter resistance.
  Cover type prevents sputtering inside the fitting and dust intrusion.
  · An optional spatter cover shuts out fine sparks.
  · By placing a release ring cover (CS), sold separately, sparks that penetrate through the gap between the release ring and the tube can not get close

  • Volume Discount

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.35 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Tube Fitting Plus Hexagonal Socket Head Straight with No Cover for Sputtering Resistance

  NIHON PISCO

  The main body and release ring are made of brass for superior flame retardancy and sputtering resistance.
  
  [Features]
  · Available sealing rubber materials include HNBR, FKM, and NBR.
  · Ideal for environments exposed to sparks.
  · Release ring made of brass offers excellent flame retardancy and sputter resistance. The cover type prevents sputtering inside fitting and dust intrusion.
  · An optional sputter cover prevents fine sparks from entering.
  · By using a release ring cover (CS – sold separately), sparks that penetrate through the gap between the release ring and the tube cannot get close.

  3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.51 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Touch Connector Five, L-Connector

  CHIYODA TSUSHO

  A low-weight, one-touch fitting with a flame retardant resin. L-connector.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.94 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Touch Connector FUJI Male Elbow

  CHIYODA TSUSHO

  A one-touch fitting with a rotation locking ring to prevent from turning and breaking. A male elbow with a body manufactured from metal or resin.
  
  [Features]
  · All-metal type fittings demonstrate excellent strength under tough conditions. The resin body type fittings are lightweight.
  · Pipes connected to different machines can be easily identified by attaching display rings (sold separately).
  · A rotating locking ring type for preventing full rotation of the tubes.
  · The threaded section has been seal processed—enabling pipes to be used directly.
  · The body and thread section of the elbows and branch tee are rotatable.
  · *This is not a rotary type fitting.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.00 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Touch Connector FUJI, Double Banjo

  CHIYODA TSUSHO

  One-touch fittings with a rotation lock ring to prevent rotation out of the tube. Double banjo; select from a metal or plastic body. 2-4 branching type also available.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.71 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Touch Connector FUJI Blind Plug

  CHIYODA TSUSHO

  Resin blind plug.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.52 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Touch Connector Nipple Connector

  CHIYODA TSUSHO

  A vacuum-compatible one-touch nipple connector fitting with good drawing strength and durability. Select from a metal or plastic body.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.53 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Touch Connector Nipple Union

  CHIYODA TSUSHO

  A vacuum-compatible one-touch fitting featuring great drawing strength and durability. Nipple union. Metal type and resin type are available.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.07 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Touch Connector H Type Elbow Connector

  CHIYODA TSUSHO

  A one-touch fitting with high pull-out strength and durability. Metal elbow connector.
  
  [Features]
  · Utilizes a special locking ring to provide maximum pull-out force and durability for this one-touch fitting.
  · The O-ring has been replaced with a Viton® packing seal to support high temperatures. Optimally suited to P flexible piping (please install an OF, such as CKN-6-01-H-OF, at the end).
  · To insert multilayered tubing, peel off the outer section and install the one-touch coupling.
  · The life of the tube can be increased significantly by fitting a standard metal cap to prevent exposure of the inner tube.
  · All-metal types have exceptional strength under tough conditions.
  · Thread section sealing (R thread): The thread section is sealed. Therefore, the fitting can be used directly for piping.
  · The body and thread section of the elbows and branch tee are rotatable.
  · *This is not a rotary type fitting.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	8.06 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Touch Connector 5 Hex Socket Male Connector

  CHIYODA TSUSHO

  Lightweight, one-touch fitting with a flame-retardant resin. Male connector with hex socket.
  
  [Features]
  · Unnecessary parts have been eliminated and the sizes of remaining parts have been minimized to achieve the ultimate cost performance.
  · Further weight reduction achieved by making body parts all resin.
  · Utilized a new lock ring to achieve a joint function to perform piping work more smoothly and securely.
  · Used new packing to reduce the connecting operation force while maintaining high airtightness.
  · The models of all items have been described on products using an all-item laser marking process.
  · A standard, flame-retardant resin has been adopted.
  · Screw part sealing (R screw): Can be used for piping as-is because the threaded part has been sealed.
  · The body and screw parts of elbows and branch tees can rotate.
  · *This is not a rotary type.
  · Note that all resin types do not rotate.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.79 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Chemifit C1 Series, 90° Elbow EL-C1

  NITTA

  90° Elbow EL-C1 is treated with a process that uses absolutely no oil. Parts are cleaned and assembled in clean rooms. No oil or grease is used even for the sealing material.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	6.63 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Chemifit C1 Series, Y Joint EY-C1

  NITTA

  Y Joint EY-C1 is a completely oil-free, processed product. Parts are cleaned and assembled in clean rooms. No oil or grease is used, even for the sealing material.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	13.17 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Chemifit C1 Series, Y Union EYB-C1

  NITTA

  Y Union EYB-C1 is treated with a process that uses absolutely no oil. Parts are cleaned and assembled in clean rooms. No oil or grease is used even for the sealing material.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	14.42 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Chemifit C1 Series Through Connector ETC-C1

  NITTA

  [Features]
  · Completely oil-free processed product. Parts are cleaned and assembled in clean rooms. No oil or grease is used even for the sealing material.
  · The tube is connected by Push One®. No need for jigs or tools to connect the tube.
  · The liquid contact part is not metal. Fluids do not make contact with any metal, so metal ions are not released.
  · Excellent non-dust and non-polluting properties. A special polypropylene resin is used as a base material.
  •  Superior smoothness of inner surface. Injection-molded for a smooth interior.
  · Double clean packaging. Each fitting is packed in a clean room and put in a zipper-sealed bag.
  ▪ The main body and the threaded part rotate. The body can rotate freely even during piping of elbow and tee.
  ▪ Compliant with the MHLW Ministerial Notification No. 201 (2006), MHW Ministerial Notification No. 370 (1959), Japan.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	5.49 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Junron One-Touch Fitting W Series (Spot Welding Equipment for Piping) Elbow

  JUNKOSHA

  Nonflammable. Superior body strength and impact resistance. The tube grip is equipped with a rotating mechanism. All the sealing materials are water resistant NBR. No sealing tape is required. The R (PT) threads and resin connecting parts rotate.
  
  [Features]
  · All the resin sections conform to the UL94V-0 flame retardant rating.
  · The pull-out strength of the R (PT) thread resin press-fit part has been improved in comparison to conventional parts.
  · The shock resistance has been significantly improved by a new mechanism tube grip.
  · The tube clip rotates smoothly inside the fitting and prevents tube from breaking due to rotation of the tube.
  · NBR is used in the water-resistant O-ring and V-seal.
  · The R (PD) threads are sealed. Therefore, wrapping the threads with sealing tape is not required.
  · The combined part of the R (PT) thread of elbow tee and resin part can be rotated. After connecting, tube-piping direction can be freely implemented and the threads can be tightened even while the resin part is fixed.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.77 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Push One A Series, Connector

  NITTA

  No jigs or tools are required for connecting tubes to this connector. Degradation of the surface is minimal and elution of copper ions into the liquid is also prevented.

  • Volume Discount

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	1.79 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  Push One A Series, Degree Universal Elbow

  NITTA

  No jigs or tools are required for connecting tubes to this double universal elbow. The surface is resistant to degradation, preventing elution of copper ions.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	12.20 €
  Min. Shipping Days ：	8 Days

  *Unit price with basic configuration

• 

  Push One A Series Union Tee

  NITTA

  No jigs or tools are required for connecting tubes to this union tee. The surface is resistant to degradation, preventing elution of copper ions.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.98 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  Push One E Series Y-Plug

  NITTA

  No jigs or tools are required for connecting tubes to this Y plug. The surface is resistant to degradation, preventing elution of copper ions.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	4.34 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  Push One E Series Service Tee

  NITTA

  No jigs or tools are required for connecting tubes to this service tee. The surface is resistant to degradation, preventing elution of copper ions.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.78 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• 

  PushOne E Series Union Connector

  NITTA

  No jigs or tools are required for connecting tubes to this union connector. Degradation of the surface is minimal and elution of copper ions into liquid is also prevented.

  2D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	3.23 €
  Min. Shipping Days ：	6 Days

  *Unit price with basic configuration

• 

  One Touch Fitting, Male Connector, EPOC Series

  EASUN

  Brand-name products provided by MISUMI are offered based on customers' needs and carefully selected from products by Asian manufacturers. Select items according to your various usage scenarios. A Chinese manufacturer of pneumatic device accessories founded in 1986. Since obtaining ISO 9001 certification in 1998, the company has focused on quality. MISUMI has widely rolled out fittings and silencers.

  • Volume Discount

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	0.50 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  One-Touch Coupling, Union Straight, CNH

  CHELIC

  The brand name products handled by Misumi VONA are carefully selected from Asian manufactures' products that are growing rapidly due their ability to meet customer needs. Please select in accordance with your various use scenarios. Pneumatic components from the Taiwanese Company Chelic, which was founded in 1988, and has receives a high rating in the global market. In particular, they receive high quality rankings for their cylinders, which are used in a variety of fields.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	2.90 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  One-Touch Coupling, Union Tee, CNTD

  CHELIC

  The brand name products handled by Misumi VONA are carefully selected from Asian manufactures' products that are growing rapidly due their ability to meet customer needs. Please select in accordance with your various use scenarios. Pneumatic components from the Taiwanese Company Chelic, which was founded in 1988, and has receives a high rating in the global market. In particular, they receive high quality rankings for their cylinders, which are used in a variety of fields.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	3.08 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• 

  Single-Touch Fitting - Cross Union Fitting CNX

  CHELIC

  The product is a single-touch cross-union type fitting. A different type with the same diameter can be selected. Selectable tube diameters include ⌀4, 6, 8, 10, and 12. A partial inventory of the product has been kept, hence same day delivery is possible. This is a small jig cylinder made by a Taiwanese company established in 1988 that specializes in pneumatic devices/accessories. Its sales are expanding in countries around the world, and its products have been well-received worldwide.

  • Volume Discount

  Select to compare

  Configure now
  Starting from∗ ：	4.17 €
  Min. Shipping Days ：	5 Days

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  KQ2L*-99, One-touch Fitting White Color - Plug-in elbow

  SMC

  A one-touch fitting by SMC.
  [Features]
  · Improved tube insertion/removal.
  · Compact and lightweight.
  · Can be used with a vacuum pressure of -100 kPa or more.
  · Body shape: Total of 51 models.
  · Thread part material / surface treatment (with/without): 2 types.
  · Available surface treatment: brass (no plating), brass + electroless nickel plating.
  [Applications]
  · Use to change the tube direction from one-touch fittings by 90 degrees while reducing the size (diameter) of the tube.
  [See here for catalog]
  · Applicable tube outer diameter (metric), Release button: oval (pp. 12) circle (pp. 109)
  · Applicable tube outer diameter (inches), Release button: oval (pp. 36) circle (pp. 141)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.45 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  KQ2V, One-touch Fitting White Color - Universal Male Elbow

  SMC

  A one-touch fitting by SMC.
  [Features]
  · Improved tube insertion/removal.
  · Compact and light weight.
  [Applications]
  · A male connector with a hexagonal head that can be tightened with a box wrench. Ideal for use in confined spaces.
  
  [See here for catalog]
  · Applicable tube outer diameter (metric), Connection thread [R], Release button: oval (pp. 13) circle (pp. 112)
  · Applicable tube outer diameter (inches), Connection thread [NPT], Release button: oval (pp. 37) circle (pp. 142)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	2.44 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

• • Promotional pricing ends 31/12/2024

  

  KQ2VF, One-touch Fitting White Color - Universal Female Elbow

  SMC

  A one-touch fitting from SMC. Available in a wide variety of model variations.
  [Features]
  · Compact and lightweight.
  · Can be used with a vacuum pressure of -100 kPa or more.
  · Improved tube insertion/removal.
  [Applications]
  · Use for triple branching at right angles from female threads. The 3 branch directions can be set independently.
  
  [See here for catalog]
  · Applicable tube outer diameter (metric), Connection thread [R], Release button: oval (pp. 15) circle (pp. 114)
  · Applicable tube outer diameter (inches), Connection thread [NPT], Release button: oval (pp. 40) circle (pp. 145)

  2D / 3D CAD data available

  Select to compare

  Configure now
  Starting from∗ ：	9.95 €
  	Special price
  Min. Shipping Days ：	Same day

  *Unit price with basic configuration

Loading...