• Märken
  • Företag
  • Kontakt
SV
Type Code Seach | *NOT READY*
#CODE
Förslag på nyckelord
Förslag på artikelnummer
Discontinued Products

Rotary Axes / Offset on Both Sides, Internal Thread / Optional Machining (PSFRHH15-100-F24-P12-T24-M5)

Rotary Axes / Offset on Both Sides, Internal Thread / Optional Machining

Click on this image to zoom in.

Click on this image to zoom in.

  • Rotary Axes / Offset on Both Sides, Internal Thread / Optional Machining
  • Rotary Axes / Offset on Both Sides, Internal Thread / Optional Machining

MISUMI

MISUMI

Product Details:

Manufacturer part number: PSFRHH15-100-F24-P12-T24-M5

Brand: MISUMI

Price: Please contact the support for quotation

Delivery time: 6 Days


Technical Data:

Material: [Steel] EN 1.1191 Equiv.

Surface Treatment: [Surface Treatment Provided] Electroless Nickel Plating

D Tolerance: h7 (Ground)

Shaft Dia. D: 15 mm

Length L: 100 mm


  • Order quantities extended (D-JIT)

Data sheet

Unit еxample related to this product
Measures for the thrust load of a small-size motor shaft
Search for оther еxamples

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

PSFRHH15-100-F24-P12-T24-M5

Dimensional Drawing

Rotary Shaft - Both Ends Stepped, Both Ends Tapped Dimensional Drawing 1
■ Standard
■Wrench Flats
[ ! ] Surface roughness of Part D for h9 (Cold-drawn) is Rotary Shaft - Both Ends Stepped and Tapped Related Image 1. Surface roughness for h7 (Ground) and g6 (Ground) is Rotary Shaft - Both Ends Stepped and Tapped Related Image 2.
■Tolerance Table
D·Ph9 (Cold-drawn)h7 (Ground)g6 (Ground)
3.1 to 6 0
− 0.030		 0
− 0.012		− 0.004
− 0.012
6.1 to 10 0
− 0.036		 0
− 0.015		− 0.005
− 0.014
10.1 to 18 0
− 0.043		 0
− 0.018		− 0.006
− 0.017
18.1 to 30 0
− 0.052		 0
− 0.021		− 0.007
− 0.020
30.1 to 50 0
− 0.062		 0
− 0.025		− 0.009
− 0.025
Rotary Shaft - Both Ends Stepped, Both Ends Tapped Dimensional Drawing 2
■Circularity and Straightness
■Concentricity and Perpendicularity
■Circularity of Part D
DCircularity
M
overor Less
5130.004
13200.005
20400.006
40500.007
■Tolerances of L and Other Dimensions
DimensionDimension
Tolerance
overor Less
26±0.1
630±0.2
30120±0.3
120400±0.5
4001000±0.8
[ ! ] Circularity, straightness, concentricity, and perpendicularity of Part D are not applicable to h9 (Cold-drawn).
TypeTolerance[M] Material[S] Surface Treatment
 StandardWrench FlatsDP
(1)NSFRMHHNSFRMHHSh9
(Cold-drawn)		h7EN 1.1191 Equiv.—
SFRMHHSFRMHHSBlack Oxide
PSFRMHHPSFRMHHSElectroless Nickel Plating
SSFRMHHSSFRMHHSEN 1.4301 Equiv.—
(2)NSFRMGHNSFRMGHSg6EN 1.1191 Equiv.—
SFRMGHSFRMGHSBlack Oxide
PSFRMGHPSFRMGHSElectroless Nickel Plating
SSFRMGHSSFRMGHSEN 1.4301 Equiv.—
(3)NSFRHHNSFRHHSh7
(Ground)		h7EN 1.1191 Equiv.—
SFRHHSFRHHSBlack Oxide
PSFRHHPSFRHHSElectroless Nickel Plating
SSFRHHSSFRHHSEN 1.4301 Equiv.—
(5)NSFRHNSFRHSg6
(Ground)		g6EN 1.1191 Equiv.—
SFRHSFRHSBlack Oxide
PSFRHPSFRHSElectroless Nickel Plating
SSFRHSSFRHSEN 1.4301 Equiv.—
AHFRHAHFRHSHigh Hardness Stainless Steel
Hardness: 35HRC or More		—
[!] High hardness stainless steel has a lower center hardness.

Specification Table

 Part Number—L—F—P—T—M—SC
(1) D Tol. h9 / P Tol. h7
(3) h7 (Ground) with Wrench Flat		SFRMHH30
SSFRHHS20		—
—		250
200		—
—		F30
F25		—
—		P28
P18		—
—		T30
T25		—
—		M20
M10
—
SC20
(1) D Tolerance h9 (Cold-drawn) / P Tolerance h7 (2) D Tolerance h9 (Cold-drawn) / P Tolerance g6
Part Number0.1 mm Increments1 mm IncrementsM (Coarse)
Selection		1 mm IncrementsWℓ2(Y)
max.
TypeDLF·TPSC
Wrench Flats Type only
StandardWrench Flats
(1) D Tol. h9 / P Tol. h7
NSFRMHH
SFRMHH
PSFRMHH
SSFRMHH
(D13, 17, 18 or 22 is not available for SSFRMHH.)
(2) D Tol. h9 / P Tol. g6
NSFRMGH
SFRMGH
PSFRMGH
SSFRMGH
(D13, 17, 18 or 22 is not available for SSFRMGH.)		(1) D Tol. h9 / P Tol. h7
NSFRMHHS
SFRMHHS
PSFRMHHS
SSFRMHHS
(D13, 17, 18 or 22 is not available for SSFRMHHS.)
(2) D Tol. h9 / P Tol. g6
NSFRMGHS
SFRMGHS
PSFRMGHS
SSFRMGHS
(D13, 17, 18 or 22 is not available for SSFRMGHS.)		615.0 to 496.02 ≤ F·T ≤ P × 552.63          SC+2 ≤ L

SC = 0 or SC ≥ 1

[ ! ] When SC ≤ M × 3 - F (T),
W - M ≥ 2		58500
815.0 to 496.0For M3 to M8,
M+2 ≤ P < D
For M10 to M16,
M+3 ≤ P < D
For M20 or M24
M+4 ≤ P < D		2.6345        7500
1015.0 to 796.0 3456       8800
1215.0 to 896.0 34568      1010900
1315.0 to 896.0 34568      11
1515.0 to 996.0 3456810     131000
1615.0 to 996.0  456810     14
1724.0 to 996.0  45681012    
1824.0 to 996.0  45681012    15
2024.0 to 996.0  4568101216   17
2224.0 to 996.0  4568101216   19
2524.0 to 996.0  456810121620  22
3024.0 to 996.0   56810121620  2715
3540.0 to 996.0    681012162024 30
(3) h7 (Ground)
Part Number0.1 mm Increments1 mm IncrementsM (Coarse)
Selection		1 mm IncrementsWℓ2(Y)
max.
TypeDLF·TPSC
Wrench Flats Type only
StandardWrench Flats
NSFRHH

SFRHH

PSFRHH

SSFRHH		NSFRHHS

SFRHHS

PSFRHHS

SSFRHHS		615.0 to 496.02 ≤ F·T ≤ P × 552.63          SC+2 ≤ L

SC = 0 or SC ≥ 1

[ ! ] When SC ≤ M × 3 - F (T),
W - M ≥ 2		58500
815.0 to 496.0For M3 to M8,
M+2 ≤ P < D
For M10 to M16,
M+3 ≤ P < D
For M20 or M24
M+4 ≤ P < D
For M30
M+5 ≤ P < D		2.6345        7500
1015.0 to 796.0 3456       8800
1215.0 to 896.0 34568      1010900
1515.0 to 996.0 3456810     131000
1724.0 to 996.0  45681012    14
2024.0 to 996.0  4568101216   171000
2524.0 to 996.0  456810121620  22
3024.0 to 996.0   56810121620  2715
3540.0 to 996.0    681012162024 30
4040.0 to 996.0      1012162024303620
5040.0 to 996.0       121620243041
(4) g6 (Ground)
Part Number0.1 mm Increments1 mm IncrementsM (Coarse)
Selection		1 mm IncrementsWℓ2(Y)
max.
TypeDLF·TPSC
Wrench Flats Type only
StandardWrench Flats
NSFRH

SFRH

PSFRH

SSFRH

AHFRH
(Only * marked sizes are available.)		NSFRHS

SFRHS

PSFRHS

SSFRHS

AHFRHS
(Only * marked sizes are available.)
* 6
15.0 to 496.02 ≤ F·T ≤ P × 5

AHFRH·
AHFRHS only
2 ≤ F·T ≤ P × 4		52.63          SC+2 ≤ L
SC = 0 or SC ≥ 1

[ ! ] When SC ≤ M × 3 - F (T),
W - M ≥ 2		58500
* 8
15.0 to 496.0For M3 to M8,
M+2 ≤ P < D

For M10 to M16,
M+3 ≤ P < D

For M20 or M24
M+4 ≤ P < D

For M30
M+5 ≤ P < D		2.6345        7500
* 10
15.0 to 796.0 3456       8800
* 12
15.0 to 896.0 34568      1010900
13
15.0 to 896.0 34568      11
* 15
15.0 to 996.0 3456810     131000
* 16
15.0 to 996.0  456810     14
17
24.0 to 996.0  45681012    
18
24.0 to 996.0  45681012    15
* 20
24.0 to 996.0  4568101216   171000
22
24.0 to 996.0  4568101216   19
* 25
24.0 to 996.0  456810121620  22
30
24.0 to 996.0   56810121620  2715
35
40.0 to 996.0    681012162024 30
40
40.0 to 996.0      1012162024303620
50
40.0 to 996.0       121620243041
[!] When D - P(Q) ≤ 2, chamfer C at the step is 0.2 or less. [!] Total length (Y) ≥ M × 2 + N × 2 is required. [!] When total length (Y) ≤ (M × 2 + pilot hole depth) + (N × 2 + pilot hole depth), the tapped pilot hole is through, and the priority is given to the large tap effective length, so the small tap effective length becomes shorter. (For MD and ND, total length (Y) ≤ (MD × 3 + pilot hole depth) + (ND × 3 + pilot hole depth).)
[NG] For AHFRH and AHFRHS, D dimensions 10 to 25 are up to 800 in overall length (Y dimension).

Alterations

Alterations
Code		Alteration DetailsApplicable ConditionsOrdering Example
KCKeyway at One Location
KC, A = 0.1 mm Increments

[ ! ] When the keyway position is less than 1 mm away from the end face,
R is not applied.

[ ! ] Key Length ≤ 100
[ NG ] Not applicable when Shaft Dia. ≤ ø5		SFRMHH30-300-F25-P20-T25-M10-KC20-A10
WKCKeyways at Two Locations
WKC, C, K, E = 0.1 mm Increments

[ ! ] When the keyway position is less than 1 mm away from the end face,
R is not applied.

[ ! ] Key Length ≤ 100
[ NG ] Not applicable when Shaft Dia. ≤ ø5		SFRMHH30-300-F25-P20-T25-M10-WKC5-C20-K5-E10
KZKeyway (1 Location (for 4th Location))
KZ, Z = 0.1 mm Increments

[ ! ] When the keyway position is less than 1 mm away from the end face,
R is not applied.

[ ! ] Key Length ≤ 100 [ NG ] Not applicable when Shaft Dia. ≤ ø5
[ ! ] Applicable only when combined with both KC and WKC		SFRMHH30-300-F25-P20-T25-M10-KC5-A10-WKC20-C10-K60-E10-KZ100-Z10
PKC·QKCKeyway on Step P (0 Point on the End Face)
PKC, QKC = 0.1 mm Increments
[ ! ] Keyway Length ≤ 70
[ NG ] Not applicable when P ≤ 5		SFRMHH30-300-F25-P20-T25-M10-PKC20.0
PP·QQKeyway on Step P (Position Specification)
PP, PK = 0.1 mm Increments QQ, QK = 0.1 mm Increments
[ ! ] Keyway Length ≤ 70
[ NG ] Not applicable when P ≤ 5		SFRMHH30-300-F25-P20-T25-M10-PP10-PK10
PV·QVMultiple Keyways on Step P
PV, PW = 0.1 mm Increments QV, QW = 0.1 mm Increments
[ ! ] Keyway Length ≤ 70
[ NG ] Not applicable when P ≤ 5
[ ! ] Applicable only when combined with PP or QQ		SFRMHH30-300-F30-P20-T25-M10-PP3-PK5-PV12-PW5
TL·TRRetaining Ring Groove on D Part
TL, TR = 0.1 mm Increments
[ ! ]2 ≤ TL (TR) +F (T) ≤ 150　		SFRMHH30-300-F25-P20-T25-M10-TL5-TR5
TF·TTRetaining Ring Groove on Step
TF, TT = 0.1 mm Increments
[ ! ]2 ≤ TF (TT) ≤ 150		SFRMHH30-300-F25-P20-T25-M10-TF5
FCSet Screw Flat at One Location
FC, G = 1 mm Increments
[ ! ]G ≤ 70		SFRMHH30-300-F25-P20-T25-M10-FC10-G3
WFCSet Screw Flats at Two Locations
WFC, J, W, V = 1 mm Increments
[ ! ]J·V ≤ 70		SFRMHH30-300-F25-P20-T25-M10-WFC10-J15-W10-V20
SFCSet Screw Flat, 2 Set Screw Flats (Angle Specified)
SFC, SG = 1 mm Increments AG = 15° Increments
[ ! ]SG ≤ 70		SFRMHH30-300-F25-P20-T25-M10-SFC10-SG3-AG120
PFC·QFCSet Screw Flat on Step
PFC, LC = 1 mm Increments QFC, RC = 1 mm Increments
[ ! ]LC·RC ≤ 70		SFRMHH30-300-F25-P20-T25-M10-PFC5-LC10
UCSlit Cam Groove
UC = 1 mm Increments
[ NG ] Not applicable when Shaft Dia. = ø2 or ø2.5 or when D ≥ 13
[NG] AHFRH or AHFRHS is not available		SFRMHH10-300-F25-P8-T25-M8-UC10
LKCL Dimension Tolerance Change
L < 500···L±0.05 L ≥ 500···L±0.1
[ NG ] Not applicable when L ≥ 800		SFRMHH30-300-F25-P20-T25-M10-LKC
CKCConcentricity
Change the concentricity to 0.02.
[ NG ] Not applicable when D Tol. = h9
[NG] AHFRH or AHFRHS is not available
[ ! ] For Lmax, see the table on the right
DLmax
6 to 22450
25 to 50600
SFRMHH30-300-F25-P20-T25-M10-CKC
MDTapped Depth
Applicable to tapped threads on both ends
To specify this Alteration, replace M with MD
[NG] Not applicable when M = 2, 2.6, 24 or 30		SFRMHH30-300-F25-P20-T25-MD10
[!] When combined with other alterations, ± 2 degree phase differential may occur. Provide 2 mm or more clearance between this alteration and others.
[ ! ] When multiple keyways or set screw flats are specified, they are added in the same plane. When the distance of the alterations are over 500 mm, ± 2 degree phase difference may occur.
Keyway Dimensions
Shaft Dia.btr
Reference DimensionTolerance (N9)Reference DimensionTolerance
6 to 72   -0.004
   -0.029		1.2 +0.1
   0		0.08 to 0.16
8 to 1031.8
11 to 124    0
   -0.03		2.5
13 to 1753.00.16 to 0.25
18 to 2263.5
23 to 308    0
   -0.036		4.0 +0.2
   0
31 to 38105.00.25 to 0.4
39 to 4412    0
   -0.043		5.0
45 to 50145.5
 
Rotary Shaft - Both Ends Stepped, Both Ends Tapped Dimensional Drawing 3
[ ! ] b ≤ A, E, C ≤ 100
[ ! ] If 3 keyways are required, use both KC and WKC.
[!] If 4 keyways are required, use KC, WKC, and KZ. (KZ is applicable only when combined with both KC and WKC)
[NG] Not applicable to D = 2 to 5.
[ ! ] The example below shows the keyway shape for the specs KC, WKC, K = 0, KC + A ≥ L and WKC + C + K + E > L.
[ ! ] Although keyway(s) and set screw flats are added in the same plane, ±2 degree phase differential may occur.
[ ! ] When the keyway position is less than 1 mm away from the end face, R is not applied.
Detailed Retaining Ring Groove Dimensions for Rotary Shafts
Shaft Dia.d ToleranceSlot Width (m) ToleranceApplicable Retaining Ring
21.2 +0.06
    0		0.4 +0.05
    0		JIS E Type 1.2
2.51.50.5JIS E Type 1.5
32JIS E Type 2
430.7 +0.1
    0		JIS E Type 3
54 +0.075
    0		JIS E Type 4
65JIS E Type 5
760.9JIS E Type 6
87 +0.09
    0		JIS E Type 7
98JIS E Type 8
109.60/－0.091.15 +0.14
    0		JIS C Type 10
1110.5   0
  -0.11		JIS C Type 11
1211.5JIS C Type 12
1312.4JIS C Type 13
1413.4JIS C Type 14
1514.3JIS C Type 15
1615.2JIS C Type 16
1716.2JIS C Type 17
18171.35JIS C Type 18
1918JIS C Type 19
 
Shaft Dia.d ToleranceSlot Width (m) ToleranceApplicable Retaining Ring
2019  0
 -0.21		1.35 +0.14
    0		JIS C Type 20
2120JIS C Type 21
2221JIS C Type 22
2322JIS C Type 23
2422.9JIS C Type 24
2523.9JIS C Type 25
2624.9JIS C Type 26
2826.61.65JIS C Type 28
2927.6JIS C Type 29
3028.6JIS C Type 30
3230.3  0
 -0.25		JIS C Type 32
3533JIS C Type 35
40381.9JIS C Type 40
4542.5JIS C Type 45
50472.2JIS C Type 50
 
 
 
 
 
 
 
 
 

 

[ ! ]2 ≤ TL (TR) +F (T) ≤ 150, 2 ≤ TF (TT) ≤ 150
[ ! ] An applicable retaining ring is included in the retaining ring groove.
(Reference Value) High Hardness Stainless Steel Center Hardness
DCenter Hardness (HRC)
335 or More
435 or More
535 or More
635 or More
835 or More
1030 or More
1230 or More
1530 or More
1630 or More
2025 or More
2525 or More
Mechanical Properties (Reference Value)
MaterialTensile Strength
(Mpa)		Yielding Point
(0.2% Proof Stress)
(MPa)		Young's Modulus
(GPa)		Transverse Modulus
(GPa)		Poisson Ratio
EN 1.1191 Equiv.
570 or More
345 or More
200 or More
77 or More
0.3
EN 1.4301 Equiv.
520 or More
210 or More
193 or More
74 or More
0.3
EN 1.7220 Equiv.
930 or More
785 or More
206 or More
79 or More
0.3
High Hardness Stainless Steel
1102
715
199
77
0.3

High Hardness Stainless Steel Material Properties
(Unit: %)
CSiMnPSNiCr
0.15-0.25≤ 0.507.5-9.5≤ 0.05≥ 0.121.5-3.013-15

Part Number:  

    3D preview is not available, because the part number has not yet been determined.

  • In order to open the 3D preview, the part number must be fixed.
Loading...

Plug-in is required for 3D Preview

CAD Download

Data to be displayed
30
45
60
  1. 1
Part Number
PSFRHH15-100-F24-P12-T24-M5
Part NumberMinimum order quantityVolume Discount
Standard
Shipping Days
?
RoHSMaterial Surface Treatment D Tolerance Shaft Dia. D
(mm) 		Length L
(mm) 		Wrench Flats P Tolerance B
(mm) 		Change to Fine Threads [PMC]
(mm) 		F
(mm) 		G
(mm) 		H
(mm) 		Tapped (Coarse / Effective Length: Nominal Diameter × 2) [M]
(mm) 		Tapped (Coarse / Effective Length: Nominal Diameter × 3) [MD]
(mm) 		P
(mm) 		S T
(mm) 		Wrench Flats Machining [SC]
(mm)
1 6 Days 10[Steel] EN 1.1191 Equiv.[Surface Treatment Provided] Electroless Nickel Platingh7 (Ground)15100W/o Wrench Flatsh7--24--5-12-24-

Loading...

  1. 1

App. Example

Rotary Shaft - Both Ends Stepped and Tapped: Related Image
 

Basic information

Basic Shape Both Ends Stepped Environmentally friendly RoHS Compliant (10 Substances) End Shape (Left) Tapped
Characteristics/Applications Not Applicable End Shape (Right) Tapped Hardness No Hardened
Keyway Keyway Option (Alteration) Cleaning Method No Cleaning

Configure

Clear all

1Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.
The part number is completed.

Basic Attributes

  • Material

    • Steel
      • EN 1.1191 Equiv.
    • Stainless Steel
      • EN 1.4301 Equiv.
      • Stainless Steel, austenitic (high hardness: 35 HRC or More)

    Clear

  • Surface Treatment

    • NA
    • Surface Treatment Provided
      • Black Oxide
      • Electroless Nickel Plating

    Clear

  • D Tolerance

    • h9 (Cold-drawn)
    • h7 (Ground)
    • g6 (Ground)

    Clear

  • Shaft Dia. D(mm)

    • 6
    • 8
    • 10
    • 12
    • 13
    • 15
    • 16
    • 17
    • 18
    • 20
    • 22
    • 25
    • 30
    • 35
    • 40
    • 50

    Clear

  • Wrench Flats

    • W/o Wrench Flats
    • With Wrench Flats

    Clear

  • P Tolerance

    • g6
    • h7

    Clear

  • B(mm)

     

    Clear

  • Change to Fine Threads [PMC](mm)

    • 5
    • 6
    • 8
    • 10
    • 12

    Clear

  • G(mm)

     

    Clear

  • H(mm)

     

    Clear

  • Tapped (Coarse / Effective Length: Nominal Diameter × 3) [MD](mm)

    • 3
    • 4
    • 5
    • 6
    • 8
    • 10
    • 12
    • 16
    • 20

    Clear

  • S

     

    Clear

  • Wrench Flats Machining [SC](mm)

     

    Clear

  • Type

    • AHFRH
    • AHFRHS
    • NSFRH
    • NSFRHH
    • NSFRHHS
    • NSFRHS
    • NSFRMGH
    • NSFRMGHS
    • NSFRMHH
    • NSFRMHHS
    • PSFRH
    • PSFRHH
    • PSFRHHS
    • PSFRHS
    • PSFRMGH
    • PSFRMGHS
    • PSFRMHH
    • PSFRMHHS
    • SFRH
    • SFRHH
    • SFRHHS
    • SFRHS
    • SFRMGH
    • SFRMGHS
    • SFRMHH
    • SFRMHHS
    • SSFRH
    • SSFRHH
    • SSFRHHS
    • SSFRHS
    • SSFRMGH
    • SSFRMGHS
    • SSFRMHH
    • SSFRMHHS

    Clear

  • Length L(mm)

     [15-798/0.1mm Unit(s)]

    Clear

  • F(mm)

     [2-70/0.1mm Unit(s)]

    Clear

  • Tapped (Coarse / Effective Length: Nominal Diameter × 2) [M](mm)

    • 2.6
    • 3
    • 4
    • 5
    • 6
    • 8
    • 10
    • 12
    • 16
    • 20
    • 24
    • 30

    Clear

  • P(mm)

    • 5
    • 6
    • 8
    • 10
    • 12

     [7-14/1mm Unit(s)]

    Clear

  • T(mm)

     [2-60/0.1mm Unit(s)]

    Clear

  • Filter by CAD data type

    • 2D
    • 3D

    Clear

Filter by standard shipping days

    • All
    • 4 Days or Less
    • 5 Days or Less
    • 6 Days or Less
    • 9 Days or Less

    Reset

Optional Attributes

Complementary Products

MISUMI Unit еxample related to this product

Search for оther еxamples

back next

Tech Support

Technical Support
Tel：+49 69 668173-0 / FAX：+49 69 668173-360
Technical Inquiry

Betalningsmetod

Faktura

Förskottsbetalning

PayPal

Behovsstyrd tillverkning

Ändra vy

Certifikat

  • ISO-9001
  • ISO-14001
  • AEO-certifiering
  • RoHS
  • REACH

MISUMI världen över

Sociala medier

Juridiskt meddelande

Copyright © MISUMI Corporation All Rights Reserved.