Filtreringsvillkor

Material
- EN 1.1191 Equiv.
- EN 1.4301 Equiv.
Hardness
- No Hardened
Surface Treatment
No Surface Treatment
Surface Treatment Provided
Black Oxide
Electroless Nickel Plating
Shaft Dia. D(mm)
- 8
- 10
- 12
- 12A
- 15
- 17
- 17A
- 20
- 25
- 30
- 35
- 40
- 45
Ds(Ø)
- 10
- 13
- 14
- 16
- 18
- 19
- 21
- 24
- 29
- 34
- 39
- 48
- 49
L(mm)
[50-500/0.5mm units]
LA(mm)
[4-150/0.5mm units]
P(mm)
[6-48/1mm units]
T(mm)
- 5
- 10
- 15
- 20
- 25
- 30
- 40
- 50
Type
- KZEC
- KZEF
- KZEN
- KZEP
- KZES
CAD
- 2D
- 3D
Uppskattade leveransdagar
- Alla
- Inom 27 arbetsdagar
- Inom 29 arbetsdagar

Motor shafts / with collar / machining selectable

KatalogS.1-877

Artikelnummer:

Ej färdigt: 65 kandidater hittades.

Skiss och specifikationstabell
Artikelnummerlista
Detaljerad information
Katalog

Skiss och specifikationstabell

Dimensional Drawing

Driving Shaft - Shoulder Type: Related Image

[ ! ]ℓ = L－ (LA+T)[ ! ]LA+T ≤ L/2
[!] The shaft may have centering holes on ends.
[!] There is an undercut 1.5 mm or less in width and 0.3 mm in depth on the stepped part.
* Ds: Tap dimension of Bearing Inner Race.

D	Tolerance h6	Circularity M
8	0 -0.009	0.003
10
12·12 A	0 -0.011
15
17·17 A
20	0 -0.013
25		0.005
30
35	0 -0.016
40
45

Type	D, P Tolerance	Concentricity	[M] Material	[H]Hardness	[S] Surface Treatment
KZEN	h6	⌀0.01	EN 1.1191 Equiv.	—	—
KZEC					Black Oxide
KZEP					Electroless Nickel Plating
KZES			EN 1.4301 Equiv.		—
KZEF			EN 1.1191 Equiv.	Induction Hardened	—
KZEF			EN 1.1191 Equiv.	Surface Hardness 50HRC or more	—

Specification Table

Part Number	—	L	—	T	—	P	—	LA
KZEN30	—	350	—	T20	—	P25	—	LA50

Part Number		0.5 mm Increments	Selection	1 mm Increments	0.5 mm Increments	H	* Ds
Type	D	L	T	P	LA	H	* Ds
KZEN KZEC KZEP KZES KZEF	8	50.0 to 220.0	5 10 15 20	6 to 9	4.0 to 40.0	12	10
	10	50.0 to 300.0		8 to 12	5.0 to 50.0	15	13
	12			10 to 13	5.0 to 60.0	15	14
	12 A		10 15 20 25	12 to 18	5.0 to 60.0	20	16
	15	100.0 to 400.0		12 to 18	5.0 to 75.0		18
	17			14 to 18	5.0 to 100.0		19
	17 A			14 to 20		25	21
	20			17 to 23		25	24
	25	100.0 to 500.0	10 20 30 40 50	20 to 28	10.0 to 125.0	30	29
	30			25 to 33	15.0 to 150.0	35	34
	35			28 to 38	15.0 to 150.0	40	39
	40	200.0 to 500.0		35 to 47	20.0 to 150.0	50	48
	45	200.0 to 500.0		35 to 48	20.0 to 150.0	50	49

Alterations

Part Number	—	L	—	T	—	P	—	LA	—	(MA, NA, KA, TA, SA, WA, etc.)
KZEF30	—	300	—	T20	—	P30	—	LA60	—	MMA30 － MMB30 － KA0 － HA50 － KB0 － HB50

Alterations

Code

Spec.

Left End

Right End

Threaded Ends

Driving Shaft - Shoulder Type: Related Image

MA
MSA
MMA

MB
MSB
MMB

Adds threads at shaft ends. Specify the length of the threads. (Accuracy, coarse or fine threads differ depending on the current ordering code.)
Ordering Code MA15-MSB15 1 mm Increments 5 ≤ Thread Length ≤ M × 5, LA-2

Code		Screw Accuracy
Left End	Right End	Screw Accuracy
MA	MB	Coarse	JIS 6h (Class 2)
MSA	MSB	Fine (Standard Grade)	JIS 6h (Class 2)
MMA	MMB	Fine (Precision Grade)	JIS 4h (Class 1)

[!] When D,P = M, thread length can be specified.

M (Coarse)	Pitch	M (Fine)	Pitch	M (Fine)	Pitch
M6	1.0	M6	0.75	M25	1.5
M8	1.25	M8	0.75	M30	1.5
M10	1.5	M10	0.75	M35	1.5
M12	1.75	M12	1.0	M40	1.5
M20	2.5	M15	1.0	M45	1.5
M24	3	M17	1.0
M30	3.5	M20	1.0
M36	4

Tapped Ends

Adds taps on shaft ends. Select the thread diameter.
Ordering Code NA5-NB5 [!] NA,NB ≤ D (P)-4

NA (Coarse), NB (Coarse)
Selection

M3 M4 M5 M6 M8
M10 M12 M16 M20
M24

Keyway Machining

KB
KC

Adds a keyway. Specify the position and the length of the keyway.
Ordering Code KA10-HA30-KB100-HB50
KA, HA, KB, HB, KC, HC = 1 mm Increments
[ ! ]3 ≤ HA,HB,HC ≤ 100
[!]When more than 2 keyways are added, the tolerances may shift by up to 0.2°.
[!] Specify the keyway position more than 2 mm away from the shouldered part.

Keyway Machining + Set Screw Flat

ZB
ZC

Adds a flat at any designated angle based on the keyways. Specify the position and the length for each keyway, and the angle for the set screw flats.
Ordering CodeZA40-HA20-AA90
ZA, HA, ZB, HB, ZC, HC, ZD, HD = 1 mm Increments AA, AB, AC, AD = 30° Increments 30° ≤ AA, AB, AC, AD ≤ 330°
[!] 3 ≤ HA, HB, HC, HD ≤ 100 [!] Specify the keyway position more than 2 mm away from the shouldered part.

·Specification Code

Keyway Position Specified	Keyway Width Specified	Angle Configurable
Keyway Position Specified	Keyway Width Specified	30° Increments
ZA	HA	AA
ZB	HB	AB
ZC	HC	AC

D·P	6 to 17	18 to 40	41 to 48
H	1	2	3

[!] The length of each set screw flat is the same as that of each keyway.
[!] For a keyway and the angle of a set screw flat, the tolerances may shift by up to ± 0.2°.

Retaining Ring Groove

Adds a retaining ring groove. Specify the position of a retaining ring groove.
Ordering Code TA10-TB100
TA, TB = 1 mm Increments [!] 4 ≤ TA ≤ LA-3
[!] Retaining rings are included.

[ NG ]P = 27,31,33,34,36 to 39,
Not available for 41 to 44, 46 to 48.

P,D ≤ 8: Retaining Ring Type E P ≥ 9, D ≥ 10: Retaining Ring Type C

Driving Shafts			Retaining Ring
[M] Material	[H]Hardness	[S] Surface Treatment	[M] Material
EN 1.1191 Equiv.	—	—	Spring Steel
		Black Oxide	Spring Steel
		Electroless Nickel Plating	EN 1.4301 Equiv. (CSP)
EN 1.4301 Equiv.		—	EN 1.4301 Equiv. (CSP)
EN 1.1191 Equiv.	Surface 50HRC or more	—	Spring Steel

Wrench Flats

SA
SH

Adds wrench flats. Specify the position of a wrench flat.
Ordering Code SA5-SB10-SH SA, SB = 1 mm Increments SA, SB ≥ 0 SA ≤ LA-ℓ, SB ≤ L-LA-T-ℓ
[!] Specification of the length for SH is not necessary. Adds wrench flats on the shoulder. (ℓ = h)

D	8	10	12	15	17	20	25	30	35	40	45
W	7	8	10	13	14	17	22	27	30	36	38
ℓ	8		10					15		20

P	6	7	8 to 10	11 to 13	14 to 15	16 to 18	19 to 21	22 to 25	26 to 28	29 to 31	32 to 37	38 to 41	42 to 45	46 to 48
W₁	5	5.5	7	10	13	14	17	19	22	27	30	36	38	41
ℓ	8			10					15			20

2 Set Screw Flats (Angle Specified)

Adds a flat at any designated angle besides the datum plane 0°.
Specify the position, the length and the angle of the set screw flats. When 0° is specified, only one set screw flat is machinable.
Ordering Code WA15-GA10-AA0
WA, WB, GA, GB = 1 mm Increments AA, AB = 30° Increments 0° ≤ AA, AB ≤ 330°

·Specification Code

Set Screw Flat Position Specification	Set Screw Flat Width Specification	Angle Configurable
Set Screw Flat Position Specification	Set Screw Flat Width Specification	30° Increments
WA	GA	AA
WB	GB	AB

D·P	6 to 17	18 to 40	41 to 48
H	1	2	3

Tolerance Change

DJ (js6)
DK (k6)

Changes the D dimension tolerance to js6 or k6.
Ordering Code DJ or DK

·About KZEF (Induction Hardened)

When alterations on the above are specified,
the shafts are induction hardened after machining. (Except the threaded sections)
As a result, these may occur:
(1): Due to thermal conduction to the thread, the threads may be hardened by 2 to 3 mm. (2): Induction Hardened may shrink the keyway width (Around -0.01 to -0.02)
If the key becomes hard to fit, adjust it by gauging.

Artikelnummerlista

Antal artiklar

Nästa

Artikelnummer

KZEC8-[50-219/0.5]-T[5,10,15,20]-P[6-9/1]-LA[4-40/0.5]

KZEC10-[50-300/0.5]-T[5,10,15,20]-P[8-12/1]-LA[5-50/0.5]

KZEC12-[50-300/0.5]-T[5,10,15,20]-P[10-13/1]-LA[5-60/0.5]

KZEC12A-[50-300/0.5]-T[10,15,20,25]-P[12-18/1]-LA[5-60/0.5]

KZEC15-[100-400/0.5]-T[10,15,20,25]-P[12-18/1]-LA[5-75/0.5]

KZEC17-[100-400/0.5]-T[10,15,20,25]-P[14-18/1]-LA[5-100/0.5]

KZEC17A-[100-400/0.5]-T[10,15,20,25]-P[14-20/1]-LA[5-100/0.5]

KZEC20-[100-400/0.5]-T[10,15,20,25]-P[17-23/1]-LA[5-100/0.5]

KZEC25-[100-500/0.5]-T[10,20,30,40,50]-P[20-28/1]-LA[10-125/0.5]

KZEC30-[100-500/0.5]-T[10,20,30,40,50]-P[25-33/1]-LA[15-150/0.5]

KZEC35-[100-500/0.5]-T[10,20,30,40,50]-P[28-38/1]-LA[15-150/0.5]

KZEC40-[200-500/0.5]-T[10,20,30,40,50]-P[35-47/1]-LA[20-150/0.5]

KZEC45-[200-500/0.5]-T[10,20,30,40,50]-P[35-48/1]-LA[20-150/0.5]

KZEF8-[50-219/0.5]-T[5,10,15,20]-P[6-9/1]-LA[4-40/0.5]

KZEF10-[50-300/0.5]-T[5,10,15,20]-P[8-12/1]-LA[5-50/0.5]

KZEF12-[50-300/0.5]-T[5,10,15,20]-P[10-13/1]-LA[5-60/0.5]

KZEF12A-[50-300/0.5]-T[10,15,20,25]-P[12-18/1]-LA[5-60/0.5]

KZEF15-[100-400/0.5]-T[10,15,20,25]-P[12-18/1]-LA[5-75/0.5]

KZEF17-[100-400/0.5]-T[10,15,20,25]-P[14-18/1]-LA[5-100/0.5]

KZEF17A-[100-400/0.5]-T[10,15,20,25]-P[14-20/1]-LA[5-100/0.5]

KZEF20-[100-400/0.5]-T[10,15,20,25]-P[17-23/1]-LA[5-100/0.5]

KZEF25-[100-500/0.5]-T[10,20,30,40,50]-P[20-28/1]-LA[10-125/0.5]

KZEF30-[100-500/0.5]-T[10,20,30,40,50]-P[25-33/1]-LA[15-150/0.5]

KZEF35-[100-500/0.5]-T[10,20,30,40,50]-P[28-38/1]-LA[15-150/0.5]

KZEF40-[200-500/0.5]-T[10,20,30,40,50]-P[35-47/1]-LA[20-150/0.5]

KZEF45-[200-500/0.5]-T[10,20,30,40,50]-P[35-48/1]-LA[20-150/0.5]

KZEN8-[50-219/0.5]-T[5,10,15,20]-P[6-9/1]-LA[4-40/0.5]

KZEN10-[50-300/0.5]-T[5,10,15,20]-P[8-12/1]-LA[5-50/0.5]

KZEN12-[50-300/0.5]-T[5,10,15,20]-P[10-13/1]-LA[5-60/0.5]

KZEN12A-[50-300/0.5]-T[10,15,20,25]-P[12-18/1]-LA[5-60/0.5]

KZEN15-[100-400/0.5]-T[10,15,20,25]-P[12-18/1]-LA[5-75/0.5]

KZEN17-[100-400/0.5]-T[10,15,20,25]-P[14-18/1]-LA[5-100/0.5]

KZEN17A-[100-400/0.5]-T[10,15,20,25]-P[14-20/1]-LA[5-100/0.5]

KZEN20-[100-400/0.5]-T[10,15,20,25]-P[17-23/1]-LA[5-100/0.5]

KZEN25-[100-500/0.5]-T[10,20,30,40,50]-P[20-28/1]-LA[10-125/0.5]

KZEN30-[100-500/0.5]-T[10,20,30,40,50]-P[25-33/1]-LA[15-150/0.5]

KZEN35-[100-500/0.5]-T[10,20,30,40,50]-P[28-38/1]-LA[15-150/0.5]

KZEN40-[200-500/0.5]-T[10,20,30,40,50]-P[35-47/1]-LA[20-150/0.5]

KZEN45-[200-500/0.5]-T[10,20,30,40,50]-P[35-48/1]-LA[20-150/0.5]

KZEP8-[50-219/0.5]-T[5,10,15,20]-P[6-9/1]-LA[4-40/0.5]

KZEP10-[50-300/0.5]-T[5,10,15,20]-P[8-12/1]-LA[5-50/0.5]

KZEP12-[50-300/0.5]-T[5,10,15,20]-P[10-13/1]-LA[5-60/0.5]

KZEP12A-[50-300/0.5]-T[10,15,20,25]-P[12-18/1]-LA[5-60/0.5]

KZEP15-[100-400/0.5]-T[10,15,20,25]-P[12-18/1]-LA[5-75/0.5]

KZEP17-[100-400/0.5]-T[10,15,20,25]-P[14-18/1]-LA[5-100/0.5]

KZEP17A-[100-400/0.5]-T[10,15,20,25]-P[14-20/1]-LA[5-100/0.5]

KZEP20-[100-400/0.5]-T[10,15,20,25]-P[17-23/1]-LA[5-100/0.5]

KZEP25-[100-500/0.5]-T[10,20,30,40,50]-P[20-28/1]-LA[10-125/0.5]

KZEP30-[100-500/0.5]-T[10,20,30,40,50]-P[25-33/1]-LA[15-150/0.5]

KZEP35-[100-500/0.5]-T[10,20,30,40,50]-P[28-38/1]-LA[15-150/0.5]

KZEP40-[200-500/0.5]-T[10,20,30,40,50]-P[35-47/1]-LA[20-150/0.5]

KZEP45-[200-500/0.5]-T[10,20,30,40,50]-P[35-48/1]-LA[20-150/0.5]

KZES8-[50-219/0.5]-T[5,10,15,20]-P[6-9/1]-LA[4-40/0.5]

KZES10-[50-300/0.5]-T[5,10,15,20]-P[8-12/1]-LA[5-50/0.5]

KZES12-[50-300/0.5]-T[5,10,15,20]-P[10-13/1]-LA[5-60/0.5]

KZES12A-[50-300/0.5]-T[10,15,20,25]-P[12-18/1]-LA[5-60/0.5]

KZES15-[100-400/0.5]-T[10,15,20,25]-P[12-18/1]-LA[5-75/0.5]

KZES17-[100-400/0.5]-T[10,15,20,25]-P[14-18/1]-LA[5-100/0.5]

KZES17A-[100-400/0.5]-T[10,15,20,25]-P[14-20/1]-LA[5-100/0.5]

KZES20-[100-400/0.5]-T[10,15,20,25]-P[17-23/1]-LA[5-100/0.5]

Material

Hardness

Surface Treatment

Shaft Dia. D

(mm)

(Ø)

(mm)

RoHS?

Minsta beställningsantal

EN 1.1191 Equiv.	No Hardened	[Surface Treatment Provided] Black Oxide	8	10	50 ～ 219	4 ～ 40	6 ～ 9	5 ～ 20	10	1 stycken
EN 1.1191 Equiv.	No Hardened	[Surface Treatment Provided] Black Oxide	10	13	50 ～ 300	5 ～ 50	8 ～ 12	5 ～ 20	10	1 stycken
EN 1.1191 Equiv.	No Hardened	[Surface Treatment Provided] Black Oxide	12	14	50 ～ 300	5 ～ 60	10 ～ 13	5 ～ 20	10	1 stycken
EN 1.1191 Equiv.	No Hardened	[Surface Treatment Provided] Black Oxide	12A	16	50 ～ 300	5 ～ 60	12 ～ 18	10 ～ 25	10	1 stycken
EN 1.1191 Equiv.	No Hardened	[Surface Treatment Provided] Black Oxide	15	18	100 ～ 400	5 ～ 75	12 ～ 18	10 ～ 25	10	1 stycken
EN 1.1191 Equiv.	No Hardened	[Surface Treatment Provided] Black Oxide	17	19	100 ～ 400	5 ～ 100	14 ～ 18	10 ～ 25	10	1 stycken
EN 1.1191 Equiv.	No Hardened	[Surface Treatment Provided] Black Oxide	17A	21	100 ～ 400	5 ～ 100	14 ～ 20	10 ～ 25	10	1 stycken
EN 1.1191 Equiv.	No Hardened	[Surface Treatment Provided] Black Oxide	20	24	100 ～ 400	5 ～ 100	17 ～ 23	10 ～ 25	10	1 stycken
EN 1.1191 Equiv.	No Hardened	[Surface Treatment Provided] Black Oxide	25	29	100 ～ 500	10 ～ 125	20 ～ 28	10 ～ 50	10	1 stycken
EN 1.1191 Equiv.	No Hardened	[Surface Treatment Provided] Black Oxide	30	34	100 ～ 500	15 ～ 150	25 ～ 33	10 ～ 50	10	1 stycken
EN 1.1191 Equiv.	No Hardened	[Surface Treatment Provided] Black Oxide	35	39	100 ～ 500	15 ～ 150	28 ～ 38	10 ～ 50	10	1 stycken
EN 1.1191 Equiv.	No Hardened	[Surface Treatment Provided] Black Oxide	40	48	200 ～ 500	20 ～ 150	35 ～ 47	10 ～ 50	10	1 stycken
EN 1.1191 Equiv.	No Hardened	[Surface Treatment Provided] Black Oxide	45	49	200 ～ 500	20 ～ 150	35 ～ 48	10 ～ 50	10	1 stycken
EN 1.1191 Equiv.	-	No Surface Treatment	8	10	50 ～ 219	4 ～ 40	6 ～ 9	5 ～ 20	10	1 stycken
EN 1.1191 Equiv.	-	No Surface Treatment	10	13	50 ～ 300	5 ～ 50	8 ～ 12	5 ～ 20	10	1 stycken
EN 1.1191 Equiv.	-	No Surface Treatment	12	14	50 ～ 300	5 ～ 60	10 ～ 13	5 ～ 20	10	1 stycken
EN 1.1191 Equiv.	-	No Surface Treatment	12A	16	50 ～ 300	5 ～ 60	12 ～ 18	10 ～ 25	10	1 stycken
EN 1.1191 Equiv.	-	No Surface Treatment	15	18	100 ～ 400	5 ～ 75	12 ～ 18	10 ～ 25	10	1 stycken
EN 1.1191 Equiv.	-	No Surface Treatment	17	19	100 ～ 400	5 ～ 100	14 ～ 18	10 ～ 25	10	1 stycken
EN 1.1191 Equiv.	-	No Surface Treatment	17A	21	100 ～ 400	5 ～ 100	14 ～ 20	10 ～ 25	10	1 stycken
EN 1.1191 Equiv.	-	No Surface Treatment	20	24	100 ～ 400	5 ～ 100	17 ～ 23	10 ～ 25	10	1 stycken
EN 1.1191 Equiv.	-	No Surface Treatment	25	29	100 ～ 500	10 ～ 125	20 ～ 28	10 ～ 50	10	1 stycken
EN 1.1191 Equiv.	-	No Surface Treatment	30	34	100 ～ 500	15 ～ 150	25 ～ 33	10 ～ 50	10	1 stycken
EN 1.1191 Equiv.	-	No Surface Treatment	35	39	100 ～ 500	15 ～ 150	28 ～ 38	10 ～ 50	10	1 stycken
EN 1.1191 Equiv.	-	No Surface Treatment	40	48	200 ～ 500	20 ～ 150	35 ～ 47	10 ～ 50	10	1 stycken
EN 1.1191 Equiv.	-	No Surface Treatment	45	49	200 ～ 500	20 ～ 150	35 ～ 48	10 ～ 50	10	1 stycken
EN 1.1191 Equiv.	No Hardened	No Surface Treatment	8	10	50 ～ 219	4 ～ 40	6 ～ 9	5 ～ 20	10	1 stycken
EN 1.1191 Equiv.	No Hardened	No Surface Treatment	10	13	50 ～ 300	5 ～ 50	8 ～ 12	5 ～ 20	10	1 stycken
EN 1.1191 Equiv.	No Hardened	No Surface Treatment	12	14	50 ～ 300	5 ～ 60	10 ～ 13	5 ～ 20	10	1 stycken
EN 1.1191 Equiv.	No Hardened	No Surface Treatment	12A	16	50 ～ 300	5 ～ 60	12 ～ 18	10 ～ 25	10	1 stycken
EN 1.1191 Equiv.	No Hardened	No Surface Treatment	15	18	100 ～ 400	5 ～ 75	12 ～ 18	10 ～ 25	10	1 stycken
EN 1.1191 Equiv.	No Hardened	No Surface Treatment	17	19	100 ～ 400	5 ～ 100	14 ～ 18	10 ～ 25	10	1 stycken
EN 1.1191 Equiv.	No Hardened	No Surface Treatment	17A	21	100 ～ 400	5 ～ 100	14 ～ 20	10 ～ 25	10	1 stycken
EN 1.1191 Equiv.	No Hardened	No Surface Treatment	20	24	100 ～ 400	5 ～ 100	17 ～ 23	10 ～ 25	10	1 stycken
EN 1.1191 Equiv.	No Hardened	No Surface Treatment	25	29	100 ～ 500	10 ～ 125	20 ～ 28	10 ～ 50	10	1 stycken
EN 1.1191 Equiv.	No Hardened	No Surface Treatment	30	34	100 ～ 500	15 ～ 150	25 ～ 33	10 ～ 50	10	1 stycken
EN 1.1191 Equiv.	No Hardened	No Surface Treatment	35	39	100 ～ 500	15 ～ 150	28 ～ 38	10 ～ 50	10	1 stycken
EN 1.1191 Equiv.	No Hardened	No Surface Treatment	40	48	200 ～ 500	20 ～ 150	35 ～ 47	10 ～ 50	10	1 stycken
EN 1.1191 Equiv.	No Hardened	No Surface Treatment	45	49	200 ～ 500	20 ～ 150	35 ～ 48	10 ～ 50	10	1 stycken
EN 1.1191 Equiv.	No Hardened	[Surface Treatment Provided] Electroless Nickel Plating	8	10	50 ～ 219	4 ～ 40	6 ～ 9	5 ～ 20	10	1 stycken
EN 1.1191 Equiv.	No Hardened	[Surface Treatment Provided] Electroless Nickel Plating	10	13	50 ～ 300	5 ～ 50	8 ～ 12	5 ～ 20	10	1 stycken
EN 1.1191 Equiv.	No Hardened	[Surface Treatment Provided] Electroless Nickel Plating	12	14	50 ～ 300	5 ～ 60	10 ～ 13	5 ～ 20	10	1 stycken
EN 1.1191 Equiv.	No Hardened	[Surface Treatment Provided] Electroless Nickel Plating	12A	16	50 ～ 300	5 ～ 60	12 ～ 18	10 ～ 25	10	1 stycken
EN 1.1191 Equiv.	No Hardened	[Surface Treatment Provided] Electroless Nickel Plating	15	18	100 ～ 400	5 ～ 75	12 ～ 18	10 ～ 25	10	1 stycken
EN 1.1191 Equiv.	No Hardened	[Surface Treatment Provided] Electroless Nickel Plating	17	19	100 ～ 400	5 ～ 100	14 ～ 18	10 ～ 25	10	1 stycken
EN 1.1191 Equiv.	No Hardened	[Surface Treatment Provided] Electroless Nickel Plating	17A	21	100 ～ 400	5 ～ 100	14 ～ 20	10 ～ 25	10	1 stycken
EN 1.1191 Equiv.	No Hardened	[Surface Treatment Provided] Electroless Nickel Plating	20	24	100 ～ 400	5 ～ 100	17 ～ 23	10 ～ 25	10	1 stycken
EN 1.1191 Equiv.	No Hardened	[Surface Treatment Provided] Electroless Nickel Plating	25	29	100 ～ 500	10 ～ 125	20 ～ 28	10 ～ 50	10	1 stycken
EN 1.1191 Equiv.	No Hardened	[Surface Treatment Provided] Electroless Nickel Plating	30	34	100 ～ 500	15 ～ 150	25 ～ 33	10 ～ 50	10	1 stycken
EN 1.1191 Equiv.	No Hardened	[Surface Treatment Provided] Electroless Nickel Plating	35	39	100 ～ 500	15 ～ 150	28 ～ 38	10 ～ 50	10	1 stycken
EN 1.1191 Equiv.	No Hardened	[Surface Treatment Provided] Electroless Nickel Plating	40	48	200 ～ 500	20 ～ 150	35 ～ 47	10 ～ 50	10	1 stycken
EN 1.1191 Equiv.	No Hardened	[Surface Treatment Provided] Electroless Nickel Plating	45	49	200 ～ 500	20 ～ 150	35 ～ 48	10 ～ 50	10	1 stycken
EN 1.4301 Equiv.	No Hardened	No Surface Treatment	8	10	50 ～ 219	4 ～ 40	6 ～ 9	5 ～ 20	10	1 stycken
EN 1.4301 Equiv.	No Hardened	No Surface Treatment	10	13	50 ～ 300	5 ～ 50	8 ～ 12	5 ～ 20	10	1 stycken
EN 1.4301 Equiv.	No Hardened	No Surface Treatment	12	14	50 ～ 300	5 ～ 60	10 ～ 13	5 ～ 20	10	1 stycken
EN 1.4301 Equiv.	No Hardened	No Surface Treatment	12A	16	50 ～ 300	5 ～ 60	12 ～ 18	10 ～ 25	10	1 stycken
EN 1.4301 Equiv.	No Hardened	No Surface Treatment	15	18	100 ～ 400	5 ～ 75	12 ～ 18	10 ～ 25	10	1 stycken
EN 1.4301 Equiv.	No Hardened	No Surface Treatment	17	19	100 ～ 400	5 ～ 100	14 ～ 18	10 ～ 25	10	1 stycken
EN 1.4301 Equiv.	No Hardened	No Surface Treatment	17A	21	100 ～ 400	5 ～ 100	14 ～ 20	10 ～ 25	10	1 stycken
EN 1.4301 Equiv.	No Hardened	No Surface Treatment	20	24	100 ～ 400	5 ～ 100	17 ～ 23	10 ～ 25	10	1 stycken

Enhetspris (exklusive MOMS)(Enhetspris inklusive MOMS)	Standardavsändningsdatum

- ( - )	27 arbetsdagar
- ( - )	27 arbetsdagar
- ( - )	27 arbetsdagar
- ( - )	27 arbetsdagar
- ( - )	27 arbetsdagar
- ( - )	27 arbetsdagar
- ( - )	27 arbetsdagar
- ( - )	27 arbetsdagar
- ( - )	27 arbetsdagar
- ( - )	27 arbetsdagar
- ( - )	27 arbetsdagar
- ( - )	27 arbetsdagar
- ( - )	27 arbetsdagar
- ( - )	29 arbetsdagar
- ( - )	29 arbetsdagar
- ( - )	29 arbetsdagar
- ( - )	29 arbetsdagar
- ( - )	29 arbetsdagar
- ( - )	29 arbetsdagar
- ( - )	29 arbetsdagar
- ( - )	29 arbetsdagar
- ( - )	29 arbetsdagar
- ( - )	29 arbetsdagar
- ( - )	29 arbetsdagar
- ( - )	29 arbetsdagar
- ( - )	29 arbetsdagar
- ( - )	27 arbetsdagar
- ( - )	27 arbetsdagar
- ( - )	27 arbetsdagar
- ( - )	27 arbetsdagar
- ( - )	27 arbetsdagar
- ( - )	27 arbetsdagar
- ( - )	27 arbetsdagar
- ( - )	27 arbetsdagar
- ( - )	27 arbetsdagar
- ( - )	27 arbetsdagar
- ( - )	27 arbetsdagar
- ( - )	27 arbetsdagar
- ( - )	27 arbetsdagar
- ( - )	29 arbetsdagar
- ( - )	29 arbetsdagar
- ( - )	29 arbetsdagar
- ( - )	29 arbetsdagar
- ( - )	29 arbetsdagar
- ( - )	29 arbetsdagar
- ( - )	29 arbetsdagar
- ( - )	29 arbetsdagar
- ( - )	29 arbetsdagar
- ( - )	29 arbetsdagar
- ( - )	29 arbetsdagar
- ( - )	29 arbetsdagar
- ( - )	29 arbetsdagar
- ( - )	29 arbetsdagar
- ( - )	29 arbetsdagar
- ( - )	29 arbetsdagar
- ( - )	29 arbetsdagar
- ( - )	29 arbetsdagar
- ( - )	29 arbetsdagar
- ( - )	29 arbetsdagar
- ( - )	29 arbetsdagar

Nästa

Grundläggande information

Teknisk information

Skiss och specifikationer

Specifications/Overview

■Selection of Driving Shaft
In selecting a driving shaft, select the basic shape and size from the specification table, then select necessary alterations such as thread machining, keyway addition etc.

[Selection Example of Part Number]
·Alteration Selection: Two Threaded Ends (Fine Thread, Precision Grade), Two Keyways

Driving Shaft - Shoulder Type: Related Image

[App. Example]

Driving Shaft - Shoulder Type: Related Image

Katalog

Products homepage

Katalog (2-sidigt uppslag)