MISUMIS START
Automation Components
Rotary Power Transmission
Shaft Couplings
Shaft Couplings
Servo couplings / hub clamping, feather key / 1 disc, 2 discs: PA / body: aluminium

Filtreringsvillkor

Allowable Torque Range(N•m)
Shaft Bore Dia. 1 d1 (or d)(mm)
- 3
- 4
- 5
- 6
- 6.35
- 7
- 8
- 9.53
- 10
- 11
- 12
- 14
- 15
- 16
- 18
- 20
- 22
- 24
Shaft Bore Dia. 2 d2 (or d)(mm)
- 3
- 4
- 5
- 6
- 6.35
- 7
- 8
- 9.53
- 10
- 11
- 12
- 14
- 15
- 16
- 18
- 20
- 22
- 24
O.D. D(mm)
- 13
- 16
- 20
- 25
- 32
- 40
- 50
Overall Length(mm)
- 13.5
- 16.5
- 18.4
- 19
- 21.6
- 23.2
- 26
- 29
- 30.2
- 35
- 41
- 47
- 53
Max. Rotational Speed Range(r/min)
Allowable Torque(Nm)
Calculation of the allowable torque (or the Safety Factor, etc.) differs depending on the manufacturer. For details, see the technical data provided by the relevant manufacturer.
- 0.25
- 0.4
- 0.6
- 1.4
- 2.6
- 4.4
- 7
Max. Rotational Speed(r/min)
- 3500
- 4000
- 4800
- 6000
- 7600
- 9000
- 12000
Allowable Lateral Misalignment Range(mm)
- 0.02 to 0.2
- 0.21 to 0.40
Allowable Lateral Misalignment(mm)
- 0.1
- 0.15
- 0.3
- 0.4
Allowable Angular Misalignment(deg)
- 2
- 3.5
Single/Double
- 1-fach
- Double
Shaft Bore Shape
Shaft I.D. d1 Change Hole Dia. [LDC] Specified in 0.1mm Increment
[3-24/0.1]
Shaft I.D. d2 Change Hole Dia. [RDC] Specified in 0.1mm Increment
[3-24/0.1]
Type
CAD
- 2D
- 3D
Uppskattade leveransdagar
- Alla
- Inom 7 arbetsdagar

MISUMI

Servo couplings / hub clamping, feather key / 1 disc, 2 discs: PA / body: aluminium

KatalogS.1-1084

Artikelnummer:

Ej färdigt: 163 kandidater hittades.

Skiss och specifikationstabell
Artikelnummerlista
Detaljerad information
Katalog

Skiss och specifikationstabell

Back to the Category Shaft Couplings

Technical Drawing - Claw Couplings

Couplings/Standard Torque Disc/Clamping:Related Image

Open the technical drawing in the new window

Available dimensions and tolerances can be found under the tab More information.

Basic Properties (e.g., material, hardness, coating, tolerance) - Claw Couplings

Standard Bore	Keywayed Bore			Material		Surface Treatment	Accessory
	d₁ (One Side)	d₂ (One Side)	d₁, d₂ (Both Sides)	Main Body	Disc	Main Body
MCGLC	MCGLCLK	MCGLCRK	MCGLCWK	Aluminum Diecast	Polyimide	Electroless Nickel Plating	Hex Socket Head Cap Screw
MCGSC	-	MCGSCRK	MCGSCWK

Further specifications can be found under the tab More information.

Composition of a Product Code - Claw Couplings

Part Number	-	Shaft Bore Dia. d₁	-	Shaft Bore Dia. d₂
MCGLC16	-	5	-	6
MCGLCWK20	-	6	-	8

Alterations - Claw Couplings

General Information - Claw Couplings

Shaft coupling - compensation coupling - Oldham coupling - slit coupling - chain coupling - disc coupling - bellow coupling - product assortment

Shaft Coupling Selection Details

- Material: aluminum, aluminum alloy, steel, stainless steel, plastic

- Coupling buffer material: polyacetal, polyurethane, nylon, aluminum bronze, carbon fibre reinforced polymer (CFRP)

- Disc material: stainless steel, polyimide, carbon fibre (carbon)

- Fastening: hub clamping, half shell clamping, threaded pin clamping, clamping sleeve, keyway

- Design: slit coupling, disc coupling (servo coupling), Oldham coupling, dog coupling, jaw coupling, bellow coupling, metal bellow coupling, elastomer coupling

- ISO tolerances: H8

- Shaft diameter: 1 to 45 mm

- Outer diameter: 6 to 95 mm

- Length: 8.4 to 100 mm

- Offset: angle offset, radial offset, axial offset

Design Overview

Description/Basics

A shaft coupling, also called a compensating coupling, is generally used for the transmission of torque for mechanical engineering. Flexible shaft couplings (non-rigid) can compensate for lateral, axial and angular offsets (misalignment). Therefore, these are common connecting elements between motors and axles/shafts or even ball screws.

There are various types of designs, such as the jaw couplings, disc couplings (servo couplings), slit couplings, bellow couplings, Oldham couplings and many others, which are selected depending on the type of misalignment. You can determine which design is the right one for transmission in your application with the Coupling Selection Method available as a PDF.

When the shaft coupling is professionally installed, the transmission of rotational forces should be slip-free. To do this, the appropriate shaft coupling must be selected depending on the application. Here, it is important to observe the degree of misalignment, the maximum speed of rotation and the permissible torque of the compensation coupling and not to exceed these values during operation. If several misalignments occur at the same time, it is recommended to reduce the maximum value of the specified misalignment by approximately half.

The most commonly used elastomer coupling is the jaw coupling, which consists of a plastic buffer with damping properties. As a result, shocks and vibrations in a drive system can be damped, which protects adjacent components in the transmission of force. Our product range offers you alternative materials for the elastomers. These include among others aluminum bronze and carbon fibre-reinforced plastic.

The different shaft connections on the compensation couplings allow various connection variants for assembly. For this purpose, hub clamping, half shell clamping, slot clamping, threaded pin clamping, chip sleeve and keyways are available.
If a keyway is selected for a MISUMI shaft coupling, it is recommended obtaining the MISUMI machine key, as it is best to combine these.

A shaft coupling can be used for precise positioning. These are often combined together with slide screws or ball screws. A disc clutch (servo coupling) is suitable for this application, since it has a high torsional rigidity.

In addition to the standardized diameter of the shaft bore, MISUMI offers the option LDC and RDC, which allows the drill diameter to be adjusted to the shaft end in 0.1 mm increments.

Application Examples - Claw Couplings

Application example: shaft coupling - disc coupling with servo motor - disc coupling with ball screw drive - shaft clutch with servo motor - shaft clutch with ball screw drive

Shaft coupling with servo motor and ball screw
(1) Servo motor, (2) disc coupling (servo coupling), (3) ball screw

Application example: shaft coupling with encoder - shaft coupling with bearing housing - slit coupling with encoder - slit coupling with bearing housing -

Slit coupling with encoder
(1) Bearing with housing, (2) shaft coupling, (3) motor, (4) axles/shafts

Application example - Performance test stand with shaft coupling - Oldham coupling with engine - test stand with Oldham coupling

Engine test stand with Oldham coupling
(1) X-axis positioning stage, (2) performance test station, (3) shaft coupling, (4) brackets, L-shaped

Application example: synchronous pulley with shaft coupling - shaft coupling with motor and gearbox

Shaft coupling with motor and gearbox
(1) Motor, (2) Shaft coupling, (3) Conversion/Reducing gears, (4) Timing pulleys / Idlers

Industrial Applications

3D printer industry

Automotive industry

Pharmaceutical industry

Packaging industry

Artikelnummerlista

Antal artiklar

Nästa

Artikelnummer

MCGLC13-[3,4,5]-[3,4,5]

MCGLC13-[3,4,5]-RDC[3-4.9/0.1]

MCGLC13-LDC[3-5/0.1]-[3,4,5]

MCGLC13-LDC[3-5/0.1]-RDC[3-4.9/0.1]

MCGLC16-[4,5,6]-[4,5,6]

MCGLC16-[4,5,6]-RDC[4.1-5.9/0.1]

MCGLC16-LDC[4.1-5.9/0.1]-[4,5,6]

MCGLC16-LDC[4.1-5.9/0.1]-RDC[4.1-5.9/0.1]

MCGLC20-[4,5,6,6.35,7,8]-[4,5,6,6.35,7,8]

MCGLC20-[4,5,6,6.35,7,8]-RDC[4.1-7.9/0.1]

MCGLC20-LDC[4.1-7.9/0.1]-[4,5,6,6.35,7,8]

MCGLC20-LDC[4.1-7.9/0.1]-RDC[4.1-7.9/0.1]

MCGLC25-[5,6,6.35,7,8,9.53,10]-[5,6,6.35,7,8,9.53,10]

MCGLC25-[5,6,6.35,7,8,9.53,10]-RDC[5.1-10/0.1]

MCGLC25-LDC[5.1-10/0.1]-[5,6,6.35,7,8,9.53,10]

MCGLC25-LDC[5.1-10/0.1]-RDC[5.1-10/0.1]

MCGLC32-[8,9.53,10,11,12,14]-[8,9.53,10,11,12,14]

MCGLC32-[8,9.53,10,11,12,14]-RDC[8-13.9/0.1]

MCGLC32-LDC[8-13.9/0.1]-[8,9.53,10,11,12,14]

MCGLC32-LDC[8-13.9/0.1]-RDC[8-13.9/0.1]

MCGLC40-[8,9.53,10,11,12,14,15,16,18]-[8,9.53,10,11,12,14,15,16,18]

MCGLC40-[8,9.53,10,11,12,14,15,16,18]-RDC[8-18/0.1]

MCGLC40-LDC[8-18/0.1]-[8,9.53,10,11,12,14,15,16,18]

MCGLC40-LDC[8-18/0.1]-RDC[8-18/0.1]

MCGLC50-[14,15,16,18,20,22,24]-[14,15,16,18,20,22,24]

MCGLC50-[14,15,16,18,20,22,24]-RDC[14-24/0.1]

MCGLC50-LDC[14-24/0.1]-[14,15,16,18,20,22,24]

MCGLC50-LDC[14-24/0.1]-RDC[14-24/0.1]

MCGLCLK16-6-6

MCGLCLK20-[6,6.35,7,8]-[6,6.35,7,8]

MCGLCLK20-[6,6.35,7,8]-RDC[6.1-7.9/0.1]

MCGLCLK20-LDC[6.1-7.9/0.1]-[6,6.35,7,8]

MCGLCLK20-LDC[6.1-7.9/0.1]-RDC[6.1-7.9/0.1]

MCGLCLK25-[6,6.35,7,8,9.53,10]-[6,6.35,7,8,9.53,10]

MCGLCLK25-[6,6.35,7,8,9.53,10]-RDC[6.1-9.9/0.1]

MCGLCLK25-LDC[6.1-9.9/0.1]-[6,6.35,7,8,9.53,10]

MCGLCLK25-LDC[6.1-9.9/0.1]-RDC[6.1-9.9/0.1]

MCGLCLK32-[8,9.53,10,11,12,14]-[8,9.53,10,11,12,14]

MCGLCLK32-[8,9.53,10,11,12,14]-RDC[8-13.9/0.1]

MCGLCLK32-LDC[8-13.9/0.1]-[8,9.53,10,11,12,14]

MCGLCLK32-LDC[8-13.9/0.1]-RDC[8-13.9/0.1]

MCGLCLK40-[8,9.53,10,11,12,14,15,16,18]-[8,9.53,10,11,12,14,15,16,18]

MCGLCLK40-[8,9.53,10,11,12,14,15,16,18]-RDC[8-18/0.1]

MCGLCLK40-LDC[8-18/0.1]-[8,9.53,10,11,12,14,15,16,18]

MCGLCLK40-LDC[8-18/0.1]-RDC[8-18/0.1]

MCGLCLK50-[14,15,16,18,20,22,24]-[14,15,16,18,20,22,24]

MCGLCLK50-[14,15,16,18,20,22,24]-RDC[14-24/0.1]

MCGLCLK50-LDC[14-24/0.1]-[14,15,16,18,20,22,24]

MCGLCLK50-LDC[14-24/0.1]-RDC[14-24/0.1]

MCGLCRK16-[4,5,6]-6

MCGLCRK16-LDC[4.1-5.9/0.1]-6

MCGLCRK20-[4,5,6,6.35,7,8]-[6,6.35,7,8]

MCGLCRK20-[4,5,6,6.35,7,8]-RDC[6.1-7.9/0.1]

MCGLCRK20-LDC[4.1-7.9/0.1]-[6,6.35,7,8]

MCGLCRK20-LDC[4.1-7.9/0.1]-RDC[6.1-7.9/0.1]

MCGLCRK25-[5,6,6.35,7,8,9.53,10]-[6,6.35,7,8,9.53,10]

MCGLCRK25-[5,6,6.35,7,8,9.53,10]-RDC[6.1-9.9/0.1]

MCGLCRK25-LDC[5.1-9.9/0.1]-[6,6.35,7,8,9.53,10]

MCGLCRK25-LDC[5.1-9.9/0.1]-RDC[6.1-9.9/0.1]

MCGLCRK32-[8,9.53,10,11,12,14]-[8,9.53,10,11,12,14]

Allowable Torque Range

(N•m)

Shaft Bore Dia. 1 d1 (or d)

(mm)

Shaft Bore Dia. 2 d2 (or d)

(mm)

O.D. D

(mm)

Overall Length

(mm)

Max. Rotational Speed Range

(r/min)

Allowable Torque

(Nm)

Max. Rotational Speed

(r/min)

Allowable Lateral Misalignment Range

(mm)

Allowable Lateral Misalignment

(mm)

Allowable Angular Misalignment

(deg)

Allowable Axial Misalignment

(mm)

Moment of Inertia

(kg･m²)

Single/Double

Shaft Bore Shape

Shaft I.D. d1 Change Hole Dia. [LDC] Specified in 0.1mm Increment

Shaft I.D. d2 Change Hole Dia. [RDC] Specified in 0.1mm Increment

RoHS?

Minsta beställningsantal

0.05 to 1.00	3 ～ 5	3 ～ 5	13	19	10,001 to 78,000	0.25	12000	0.21 to 0.40	0.3	3.5	+0.2/-0.2	8.0x10^-8	Double	Standard Holes	-	-	10	1 stycken
0.05 to 1.00	3 ～ 5	-	13	19	10,001 to 78,000	0.25	12000	0.21 to 0.40	0.3	3.5	+0.2/-0.2	8.0x10^-8	Double	Standard Holes	-	3 ～ 4.9	10	1 stycken
0.05 to 1.00	-	3 ～ 5	13	19	10,001 to 78,000	0.25	12000	0.21 to 0.40	0.3	3.5	+0.2/-0.2	8.0x10^-8	Double	Standard Holes	3 ～ 5	-	10	1 stycken
0.05 to 1.00	-	-	13	19	10,001 to 78,000	0.25	12000	0.21 to 0.40	0.3	3.5	+0.2/-0.2	8.0x10^-8	Double	Standard Holes	3 ～ 5	3 ～ 4.9	10	1 stycken
0.05 to 1.00	4 ～ 6	4 ～ 6	16	23.2	4,001 to 10,000	0.4	9000	0.21 to 0.40	0.3	3.5	+0.3/-0.3	2.4x10^-7	Double	Standard Holes	-	-	10	1 stycken
0.05 to 1.00	4 ～ 6	-	16	23.2	4,001 to 10,000	0.4	9000	0.21 to 0.40	0.3	3.5	+0.3/-0.3	2.4x10^-7	Double	Standard Holes	-	4.1 ～ 5.9	10	1 stycken
0.05 to 1.00	-	4 ～ 6	16	23.2	4,001 to 10,000	0.4	9000	0.21 to 0.40	0.3	3.5	+0.3/-0.3	2.4x10^-7	Double	Standard Holes	4.1 ～ 5.9	-	10	1 stycken
0.05 to 1.00	-	-	16	23.2	4,001 to 10,000	0.4	9000	0.21 to 0.40	0.3	3.5	+0.3/-0.3	2.4x10^-7	Double	Standard Holes	4.1 ～ 5.9	4.1 ～ 5.9	10	1 stycken
0.05 to 1.00	4 ～ 8	4 ～ 8	20	26	4,001 to 10,000	0.6	7600	0.21 to 0.40	0.3	3.5	+0.4/-0.4	7.2x10^-7	Double	Standard Holes	-	-	10	1 stycken
0.05 to 1.00	4 ～ 8	-	20	26	4,001 to 10,000	0.6	7600	0.21 to 0.40	0.3	3.5	+0.4/-0.4	7.2x10^-7	Double	Standard Holes	-	4.1 ～ 7.9	10	1 stycken
0.05 to 1.00	-	4 ～ 8	20	26	4,001 to 10,000	0.6	7600	0.21 to 0.40	0.3	3.5	+0.4/-0.4	7.2x10^-7	Double	Standard Holes	4.1 ～ 7.9	-	10	1 stycken
0.05 to 1.00	-	-	20	26	4,001 to 10,000	0.6	7600	0.21 to 0.40	0.3	3.5	+0.4/-0.4	7.2x10^-7	Double	Standard Holes	4.1 ～ 7.9	4.1 ～ 7.9	10	1 stycken
1.01 to 3.00	5 ～ 10	5 ～ 10	25	30.2	4,001 to 10,000	1.4	6000	0.21 to 0.40	0.3	3.5	+0.5/-0.5	2.2x10^-6	Double	Standard Holes	-	-	10	1 stycken
1.01 to 3.00	5 ～ 10	-	25	30.2	4,001 to 10,000	1.4	6000	0.21 to 0.40	0.3	3.5	+0.5/-0.5	2.2x10^-6	Double	Standard Holes	-	5.1 ～ 10	10	1 stycken
1.01 to 3.00	-	5 ～ 10	25	30.2	4,001 to 10,000	1.4	6000	0.21 to 0.40	0.3	3.5	+0.5/-0.5	2.2x10^-6	Double	Standard Holes	5.1 ～ 10	-	10	1 stycken
1.01 to 3.00	-	-	25	30.2	4,001 to 10,000	1.4	6000	0.21 to 0.40	0.3	3.5	+0.5/-0.5	2.2x10^-6	Double	Standard Holes	5.1 ～ 10	5.1 ～ 10	10	1 stycken
1.01 to 3.00	8 ～ 14	8 ～ 14	32	41	4,001 to 10,000	2.6	4800	0.21 to 0.40	0.3	3.5	+0.5/-0.5	6.0x10^-6	Double	Standard Holes	-	-	10	1 stycken
1.01 to 3.00	8 ～ 14	-	32	41	4,001 to 10,000	2.6	4800	0.21 to 0.40	0.3	3.5	+0.5/-0.5	6.0x10^-6	Double	Standard Holes	-	8 ～ 13.9	10	1 stycken
1.01 to 3.00	-	8 ～ 14	32	41	4,001 to 10,000	2.6	4800	0.21 to 0.40	0.3	3.5	+0.5/-0.5	6.0x10^-6	Double	Standard Holes	8 ～ 13.9	-	10	1 stycken
1.01 to 3.00	-	-	32	41	4,001 to 10,000	2.6	4800	0.21 to 0.40	0.3	3.5	+0.5/-0.5	6.0x10^-6	Double	Standard Holes	8 ～ 13.9	8 ～ 13.9	10	1 stycken
3.01 to 5.00	8 ～ 18	8 ～ 18	40	47	2001 to 4,000	4.4	4000	0.21 to 0.40	0.4	3.5	+0.6/-0.6	1.7x10^-5	Double	Standard Holes	-	-	10	1 stycken
3.01 to 5.00	8 ～ 18	-	40	47	2001 to 4,000	4.4	4000	0.21 to 0.40	0.4	3.5	+0.6/-0.6	1.7x10^-5	Double	Standard Holes	-	8 ～ 18	10	1 stycken
3.01 to 5.00	-	8 ～ 18	40	47	2001 to 4,000	4.4	4000	0.21 to 0.40	0.4	3.5	+0.6/-0.6	1.7x10^-5	Double	Standard Holes	8 ～ 18	-	10	1 stycken
3.01 to 5.00	-	-	40	47	2001 to 4,000	4.4	4000	0.21 to 0.40	0.4	3.5	+0.6/-0.6	1.7x10^-5	Double	Standard Holes	8 ～ 18	8 ～ 18	10	1 stycken
5.01 to 10.00	14 ～ 24	14 ～ 24	50	53	2001 to 4,000	7	3500	0.21 to 0.40	0.4	3.5	+0.6/-0.6	4.6x10^-5	Double	Standard Holes	-	-	10	1 stycken
5.01 to 10.00	14 ～ 24	-	50	53	2001 to 4,000	7	3500	0.21 to 0.40	0.4	3.5	+0.6/-0.6	4.6x10^-5	Double	Standard Holes	-	14 ～ 24	10	1 stycken
5.01 to 10.00	-	14 ～ 24	50	53	2001 to 4,000	7	3500	0.21 to 0.40	0.4	3.5	+0.6/-0.6	4.6x10^-5	Double	Standard Holes	14 ～ 24	-	10	1 stycken
5.01 to 10.00	-	-	50	53	2001 to 4,000	7	3500	0.21 to 0.40	0.4	3.5	+0.6/-0.6	4.6x10^-5	Double	Standard Holes	14 ～ 24	14 ～ 24	10	1 stycken
0.05 to 1.00	6	6	16	23.2	4,001 to 10,000	0.4	9000	0.21 to 0.40	0.3	3.5	+0.3/-0.3	2.4x10^-7	Double	Hole with Keyway d1 Side	-	-	10	1 stycken
0.05 to 1.00	6 ～ 8	6 ～ 8	20	26	4,001 to 10,000	0.6	7600	0.21 to 0.40	0.3	3.5	+0.4/-0.4	7.2x10^-7	Double	Hole with Keyway d1 Side	-	-	10	1 stycken
0.05 to 1.00	6 ～ 8	-	20	26	4,001 to 10,000	0.6	7600	0.21 to 0.40	0.3	3.5	+0.4/-0.4	7.2x10^-7	Double	Hole with Keyway d1 Side	-	6.1 ～ 7.9	10	1 stycken
0.05 to 1.00	-	6 ～ 8	20	26	4,001 to 10,000	0.6	7600	0.21 to 0.40	0.3	3.5	+0.4/-0.4	7.2x10^-7	Double	Hole with Keyway d1 Side	6.1 ～ 7.9	-	10	1 stycken
0.05 to 1.00	-	-	20	26	4,001 to 10,000	0.6	7600	0.21 to 0.40	0.3	3.5	+0.4/-0.4	7.2x10^-7	Double	Hole with Keyway d1 Side	6.1 ～ 7.9	6.1 ～ 7.9	10	1 stycken
1.01 to 3.00	6 ～ 10	6 ～ 10	25	30.2	4,001 to 10,000	1.4	6000	0.21 to 0.40	0.3	3.5	+0.5/-0.5	2.2x10^-6	Double	Hole with Keyway d1 Side	-	-	10	1 stycken
1.01 to 3.00	6 ～ 10	-	25	30.2	4,001 to 10,000	1.4	6000	0.21 to 0.40	0.3	3.5	+0.5/-0.5	2.2x10^-6	Double	Hole with Keyway d1 Side	-	6.1 ～ 9.9	10	1 stycken
1.01 to 3.00	-	6 ～ 10	25	30.2	4,001 to 10,000	1.4	6000	0.21 to 0.40	0.3	3.5	+0.5/-0.5	2.2x10^-6	Double	Hole with Keyway d1 Side	6.1 ～ 9.9	-	10	1 stycken
1.01 to 3.00	-	-	25	30.2	4,001 to 10,000	1.4	6000	0.21 to 0.40	0.3	3.5	+0.5/-0.5	2.2x10^-6	Double	Hole with Keyway d1 Side	6.1 ～ 9.9	6.1 ～ 9.9	10	1 stycken
1.01 to 3.00	8 ～ 14	8 ～ 14	32	41	4,001 to 10,000	2.6	4800	0.21 to 0.40	0.3	3.5	+0.5/-0.5	6.0x10^-6	Double	Hole with Keyway d1 Side	-	-	10	1 stycken
1.01 to 3.00	8 ～ 14	-	32	41	4,001 to 10,000	2.6	4800	0.21 to 0.40	0.3	3.5	+0.5/-0.5	6.0x10^-6	Double	Hole with Keyway d1 Side	-	8 ～ 13.9	10	1 stycken
1.01 to 3.00	-	8 ～ 14	32	41	4,001 to 10,000	2.6	4800	0.21 to 0.40	0.3	3.5	+0.5/-0.5	6.0x10^-6	Double	Hole with Keyway d1 Side	8 ～ 13.9	-	10	1 stycken
1.01 to 3.00	-	-	32	41	4,001 to 10,000	2.6	4800	0.21 to 0.40	0.3	3.5	+0.5/-0.5	6.0x10^-6	Double	Hole with Keyway d1 Side	8 ～ 13.9	8 ～ 13.9	10	1 stycken
3.01 to 5.00	8 ～ 18	8 ～ 18	40	47	2001 to 4,000	4.4	4000	0.21 to 0.40	0.4	3.5	+0.6/-0.6	1.7x10^-5	Double	Hole with Keyway d1 Side	-	-	10	1 stycken
3.01 to 5.00	8 ～ 18	-	40	47	2001 to 4,000	4.4	4000	0.21 to 0.40	0.4	3.5	+0.6/-0.6	1.7x10^-5	Double	Hole with Keyway d1 Side	-	8 ～ 18	10	1 stycken
3.01 to 5.00	-	8 ～ 18	40	47	2001 to 4,000	4.4	4000	0.21 to 0.40	0.4	3.5	+0.6/-0.6	1.7x10^-5	Double	Hole with Keyway d1 Side	8 ～ 18	-	10	1 stycken
3.01 to 5.00	-	-	40	47	2001 to 4,000	4.4	4000	0.21 to 0.40	0.4	3.5	+0.6/-0.6	1.7x10^-5	Double	Hole with Keyway d1 Side	8 ～ 18	8 ～ 18	10	1 stycken
5.01 to 10.00	14 ～ 24	14 ～ 24	50	53	2001 to 4,000	7	3500	0.21 to 0.40	0.4	3.5	+0.6/-0.6	4.6x10^-5	Double	Hole with Keyway d1 Side	-	-	10	1 stycken
5.01 to 10.00	14 ～ 24	-	50	53	2001 to 4,000	7	3500	0.21 to 0.40	0.4	3.5	+0.6/-0.6	4.6x10^-5	Double	Hole with Keyway d1 Side	-	14 ～ 24	10	1 stycken
5.01 to 10.00	-	14 ～ 24	50	53	2001 to 4,000	7	3500	0.21 to 0.40	0.4	3.5	+0.6/-0.6	4.6x10^-5	Double	Hole with Keyway d1 Side	14 ～ 24	-	10	1 stycken
5.01 to 10.00	-	-	50	53	2001 to 4,000	7	3500	0.21 to 0.40	0.4	3.5	+0.6/-0.6	4.6x10^-5	Double	Hole with Keyway d1 Side	14 ～ 24	14 ～ 24	10	1 stycken
0.05 to 1.00	4 ～ 6	6	16	23.2	4,001 to 10,000	0.4	9000	0.21 to 0.40	0.3	3.5	+0.3/-0.3	2.4x10^-7	Double	Hole with Keyway d2 Side	-	-	10	1 stycken
0.05 to 1.00	-	6	16	23.2	4,001 to 10,000	0.4	9000	0.21 to 0.40	0.3	3.5	+0.3/-0.3	2.4x10^-7	Double	Hole with Keyway d2 Side	4.1 ～ 5.9	-	10	1 stycken
0.05 to 1.00	4 ～ 8	6 ～ 8	20	26	4,001 to 10,000	0.6	7600	0.21 to 0.40	0.3	3.5	+0.4/-0.4	7.2x10^-7	Double	Hole with Keyway d2 Side	-	-	10	1 stycken
0.05 to 1.00	4 ～ 8	-	20	26	4,001 to 10,000	0.6	7600	0.21 to 0.40	0.3	3.5	+0.4/-0.4	7.2x10^-7	Double	Hole with Keyway d2 Side	-	6.1 ～ 7.9	10	1 stycken
0.05 to 1.00	-	6 ～ 8	20	26	4,001 to 10,000	0.6	7600	0.21 to 0.40	0.3	3.5	+0.4/-0.4	7.2x10^-7	Double	Hole with Keyway d2 Side	4.1 ～ 7.9	-	10	1 stycken
0.05 to 1.00	-	-	20	26	4,001 to 10,000	0.6	7600	0.21 to 0.40	0.3	3.5	+0.4/-0.4	7.2x10^-7	Double	Hole with Keyway d2 Side	4.1 ～ 7.9	6.1 ～ 7.9	10	1 stycken
1.01 to 3.00	5 ～ 10	6 ～ 10	25	30.2	4,001 to 10,000	1.4	6000	0.21 to 0.40	0.3	3.5	+0.5/-0.5	2.2x10^-6	Double	Hole with Keyway d2 Side	-	-	10	1 stycken
1.01 to 3.00	5 ～ 10	-	25	30.2	4,001 to 10,000	1.4	6000	0.21 to 0.40	0.3	3.5	+0.5/-0.5	2.2x10^-6	Double	Hole with Keyway d2 Side	-	6.1 ～ 9.9	10	1 stycken
1.01 to 3.00	-	6 ～ 10	25	30.2	4,001 to 10,000	1.4	6000	0.21 to 0.40	0.3	3.5	+0.5/-0.5	2.2x10^-6	Double	Hole with Keyway d2 Side	5.1 ～ 9.9	-	10	1 stycken
1.01 to 3.00	-	-	25	30.2	4,001 to 10,000	1.4	6000	0.21 to 0.40	0.3	3.5	+0.5/-0.5	2.2x10^-6	Double	Hole with Keyway d2 Side	5.1 ～ 9.9	6.1 ～ 9.9	10	1 stycken
1.01 to 3.00	8 ～ 14	8 ～ 14	32	41	4,001 to 10,000	2.6	4800	0.21 to 0.40	0.3	3.5	+0.5/-0.5	6.0x10^-6	Double	Hole with Keyway d2 Side	-	-	10	1 stycken

Enhetspris (exklusive MOMS)(Enhetspris inklusive MOMS)	Standardavsändningsdatum

- ( - )	7 arbetsdagar
- ( - )	7 arbetsdagar
- ( - )	7 arbetsdagar
- ( - )	7 arbetsdagar
- ( - )	7 arbetsdagar
- ( - )	7 arbetsdagar
- ( - )	7 arbetsdagar
- ( - )	7 arbetsdagar
- ( - )	7 arbetsdagar
- ( - )	7 arbetsdagar
- ( - )	7 arbetsdagar
- ( - )	7 arbetsdagar
- ( - )	7 arbetsdagar
- ( - )	7 arbetsdagar
- ( - )	7 arbetsdagar
- ( - )	7 arbetsdagar
- ( - )	7 arbetsdagar
- ( - )	7 arbetsdagar
- ( - )	7 arbetsdagar
- ( - )	7 arbetsdagar
- ( - )	7 arbetsdagar
- ( - )	7 arbetsdagar
- ( - )	7 arbetsdagar
- ( - )	7 arbetsdagar
- ( - )	7 arbetsdagar
- ( - )	7 arbetsdagar
- ( - )	7 arbetsdagar
- ( - )	7 arbetsdagar
- ( - )	7 arbetsdagar
- ( - )	7 arbetsdagar
- ( - )	7 arbetsdagar
- ( - )	7 arbetsdagar
- ( - )	7 arbetsdagar
- ( - )	7 arbetsdagar
- ( - )	7 arbetsdagar
- ( - )	7 arbetsdagar
- ( - )	7 arbetsdagar
- ( - )	7 arbetsdagar
- ( - )	7 arbetsdagar
- ( - )	7 arbetsdagar
- ( - )	7 arbetsdagar
- ( - )	7 arbetsdagar
- ( - )	7 arbetsdagar
- ( - )	7 arbetsdagar
- ( - )	7 arbetsdagar
- ( - )	7 arbetsdagar
- ( - )	7 arbetsdagar
- ( - )	7 arbetsdagar
- ( - )	7 arbetsdagar
- ( - )	7 arbetsdagar
- ( - )	7 arbetsdagar
- ( - )	7 arbetsdagar
- ( - )	7 arbetsdagar
- ( - )	7 arbetsdagar
- ( - )	7 arbetsdagar
- ( - )	7 arbetsdagar
- ( - )	7 arbetsdagar
- ( - )	7 arbetsdagar
- ( - )	7 arbetsdagar
- ( - )	7 arbetsdagar

Nästa

Grundläggande information

Teknisk information

Skiss och specifikationer

Back to the Category Shaft Couplings

Technical Drawing - Claw Couplings

Open the technical drawing in the new window

Specification Tables - Claw Couplings

Part Number		d₁, d₂ Selection (d₁≤d₂) Keywayed Bore Type is selectable for diameter 6 or larger																		d₃	L	ℓ	A	F	Clamp Screw		Unit Price
Type	D																			d₃	L	ℓ	A	F	M	Tightening Torque (N • m)	MCGLC	MCGLCLK MCGLCRK	MCGLCWK
Double Disc Type MCGLC MCGLCLK MCGLCRK MCGLCWK	13	*3	4	5																5.5	19	5.5	4.1	2.5	M2	0.42		-	-
	16		*4	5	6															6.8	23.2	7	5	3	M2.5	1
	20		*4	5	6	6.35	7	8												8.1	26	7.5	6.5	3.7	M2.5	1
	25			*5	6	6.35	7	8	9.53	10										10.4	30.2	9	8.5	4	M3	1.7
	32							8	9.53	10	11	12	14							15	41	12.4	10	6	M4	2.5
	40							8	9.53	10	11	12	14	15	16	18				19.5	47	15.5	13.1	7.8	M5	7
	50												14	15	16	18	20	22	24	25	53	18	16.7	9	M6	12

Part Number		d₁, d₂ Selection (d₁≤d₂) Keywayed Bore Type is selectable for diameter 6 or larger																		L	ℓ	A	F	Clamp Screw		Unit Price
Type	D																			L	ℓ	A	F	M	Tightening Torque (N • m)	MCGSC	MCGSCRK	MCGSCWK
Single Disc Type MCGSC MCGSCRK MCGSCWK	13	*3	4	5																13.5	5.5	4.1	2.5	M2	0.42		-	-
	16		*4	5	6															16.5	7	5	3	M2.5	1
	20		*4	5	6	6.35	7	8												18.4	7.5	6.5	3.7	M2.5	1
	25			*5	6	6.35	7	8	9.53	10										21.6	9	8.5	4	M3	1.7
	32							8	9.53	10	11	12	14							29	12.4	10	6	M4	2.5
	40							8	9.53	10	11	12	14	15	16	18				35	15.5	13.1	7.8	M5	7
	50												14	15	16	18	20	22	24	41	18	16.7	9	M6	12

When d1 is *3, *4, *5, use with the load torque 50% or less than that shown in the table to prevent slipping.

■Double Disc Type

Part Number		Allowable Torque (N • m)	Angular Misalignment (°)	Lateral Misalignment (mm)	Static Torsional Spring Constant (N • m/rad)	Max. Rotational Speed (r/min)	Moment of Inertia (kg • m²)	Allowable Axial Misalignment (mm)	Mass (g)
Type	D	Allowable Torque (N • m)	Angular Misalignment (°)	Lateral Misalignment (mm)	Static Torsional Spring Constant (N • m/rad)	Max. Rotational Speed (r/min)	Moment of Inertia (kg • m²)	Allowable Axial Misalignment (mm)	Mass (g)
MCGLC MCGLCLK MCGLCRK MCGLCWK	13	0.25	3.5	0.3	44	12000	8.0x10^-8	±0.2	5
	16	0.4			70	9000	2.4x10^-7	±0.3	9
	20	0.6			130	7600	7.2x10^-7	±0.4	14
	25	1.4			240	6000	2.2x10^-6	±0.5	27
	32	2.6			560	4800	6.0x10^-6	±0.5	60
	40	4.4		0.4	980	4000	1.7x10^-5	±0.6	104
	50	7.0		0.4	1100	3500	4.6x10^-5	±0.6	210

■Single Disc Type

Part Number		Allowable Torque (N • m)	Angular Misalignment (°)	Lateral Misalignment (mm)	Static Torsional Spring Constant (N • m/rad)	Max. Rotational Speed (r/min)	Moment of Inertia (kg • m²)	Allowable Axial Misalignment (mm)	Mass (g)
Type	D	Allowable Torque (N • m)	Angular Misalignment (°)	Lateral Misalignment (mm)	Static Torsional Spring Constant (N • m/rad)	Max. Rotational Speed (r/min)	Moment of Inertia (kg • m²)	Allowable Axial Misalignment (mm)	Mass (g)
MCGSC MCGSCRK MCGSCWK	13	0.25	2	0.1	60	12000	7.0x10^-8	±0.1	4
	16	0.4			90	9000	2.0x10^-7		7
	20	0.6			170	7600	6.0x10^-7		11
	25	1.4			300	6000	1.8x10^-6	±0.2	22
	32	2.6			700	4800	5.2x10^-6	±0.3	50
	40	4.4		0.15	1200	4000	1.3x10^-5		85
	50	7.0		0.15	1450	3500	3.6x10^-5		170

Alterations - Claw Couplings

Katalog

Products homepage

Katalog (2-sidigt uppslag)