Filtreringsvillkor
- Lager
- Visa endast lagervaror
- Material
- Stainless Steel
- EN 1.4308 Equiv.
- Steel
- EN-JM 1010 Equiv.
- Screw Nominal T1
- Screw Nominal T2
- Applicable Fluid
- Surface Treatment
- Seal Coating
- CAD
- 2D
- 3D
- Uppskattade leveransdagar
- Alla
- Skicka samma dag går att få
- Inom 6 arbetsdagar
Low Pressure Fittings / 90 Deg. Elbow / Threaded and Tapped
Artikelnummer:
kandidater hittades.Skiss och specifikationstabell
■Without thread coating
■With thread coating
Allowable temperature: 150℃
| Type | Material | Surface Treatment |
| SGPPEL | EN-JM 1010 Equiv. | Hot Zinc Plating |
| SUTPEL | EN 1.4308 Equiv. | - |
■With thread coating
| Type | Material | Surface Treatment |
| SGCEL | EN-JM 1010 Equiv. | Hot Zinc Plating |
| SUCEL | EN 1.4308 Equiv. | - |
Specifications
| Part Number |
| SGCEL25A SGCPP20A |
■Without thread coating
■With thread coating
| Part Number | R, Rc (PT) | SGPPEL | SUTPEL | |||||||||
| Type | No. | (D) | (L1) | (L2) | A | B | (D) | (L1) | (L2) | A | B | |
| SGPPEL SUTPEL | 6A | 1/8 | 19 | 23 | 36 | 17 | 26 | 14.5 | 22 | 33 | 17 | 26 |
| 8A | 1/4 | 22 | 26 | 42 | 19 | 30 | 19 | 24.3 | 39.5 | 19 | 30 | |
| 10A | 3/8 | 27 | 31 | 48 | 23 | 35 | 23 | 29.8 | 46.5 | 23 | 35 | |
| 15A | 1/2 | 31 | 38 | 56 | 27 | 40 | 27 | 35.8 | 53.5 | 27 | 40 | |
| 20A | 3/4 | 36 | 45 | 66 | 32 | 47 | 33 | 43.3 | 63.5 | 32 | 47 | |
| 25A | 1 | 45 | 55 | 76.5 | 38 | 54 | 41 | 52.5 | 74.5 | 38 | 54 | |
| 32A | 1 1/4 | 55 | 67 | 89.5 | 46 | 62 | 50 | 64 | 87 | 46 | 62 | |
| 40A | 1 1/2 | 62 | 72 | 99 | 48 | 68 | 56 | 68.5 | 96 | 48 | 68 | |
| 50A | 2 | 75 | 87 | 116.5 | 57 | 79 | 69 | 83 | 113.5 | 57 | 79 | |
■With thread coating
| Part Number | R Rc (PT) | SGCEL | SUCEL | |||||||||
| Type | No. | (D) | (L1) | (L2) | A | B | (D) | (L1) | (L2) | A | B | |
| SGCEL SUCEL | 6A | 1/8 | 19 | 23 | 36 | 17 | 26 | 14.5 | 22 | 33 | 17 | 26 |
| 8A | 1/4 | 22 | 26 | 42 | 19 | 30 | 21 | 26 | 41 | 19 | 30 | |
| 10A | 3/8 | 27 | 31 | 48 | 23 | 35 | 25 | 32 | 48 | 23 | 35 | |
| 15A | 1/2 | 31 | 38 | 56 | 27 | 40 | 29 | 38 | 55 | 27 | 40 | |
| 20A | 3/4 | 36 | 45 | 66 | 32 | 47 | 36 | 46 | 65 | 32 | 47 | |
| 25A | 1 | 45 | 55 | 76.5 | 38 | 54 | 44 | 55 | 76 | 38 | 54 | |
Artikelnummerlista
Antal artiklar
Enhetspris (exklusive MOMS)(Enhetspris inklusive MOMS) | Standardavsändningsdatum |
|---|
4.41 €2.73 € ( 3.25 € ) | Lagervara - 1 arbetsdagKan skickas samma dag |
2.39 € ( 2.84 € ) | Lagervara - 1 arbetsdagKan skickas samma dag |
10.45 € ( 12.44 € ) | 6 arbetsdagar |
8.95 € ( 10.65 € ) | Lagervara - 1 arbetsdagKan skickas samma dag |
Detaljerad information
Grundläggande information
[Connection type] Thread on thread, same diameter / different type; Connection form: internal / external thread; Material: You can choose between EN 1.4308 Equiv. and EN-JM 1010 Equiv.
Skiss och specifikationer
More Information
| Applicable Standards |
■ C-VALUE Products: ISO 4144 Complaint, GB/T 7306 Equiv.
■ Fitting Material
| Fitting Type | Steel | Stainless Steel |
| Low Pressure Screw Fittings | Casting: EN-JM 1010 Equiv. (Malleable Casting) or Equiv. * Customers who are particular about external appearance should note that surface is rough because of limitations in the manufacturing process. | Casting: EN 1.4308 Equiv. (EN 1.4301 Equiv.) EN 1.4408 Equiv. (EN 1.4401 Equiv.) or Equiv. |
| High Pressure Screw Fittings | EN 1.1158 Equiv. or Equiv. | EN 1.4308 Equiv. (EN 1.4301 Equiv.) |
| Pressure, Temperature Standards |
| Fluid State (°C) | Max. Operating Pressure (Mpa) |
| Steam, Air, Gas, Oil: Up to 300°C | 1.0 |
| Steam, Air, Oil, Pulsating Water: Up to 200°C | 1.4 |
| Static Flow Water: Up to 120°C | 2.0 |
* Static Flow Water is a non-pulsating stream of water.