Filtreringsvillkor
- Lager
- Visa endast lagervaror
- I.D. D(mm)
- 5
- 6
- 8
- 10
- 12
- 14
- 16
- 18
- 20
- 22
- 25
- 30
- Type
- CAD
- 3D
- Uppskattade leveransdagar
- Alla
- Skicka samma dag går att få
- Inom 5 arbetsdagar
Spherical Bearings / Standard
Artikelnummer:
kandidater hittades.Skiss och specifikationstabell
[ ! ] Spherical bearings cannot bear thrust loads.
| Type | [M] Material | [S] Surface Treatment | |||
| Holder | Spherical Inner Ring | Bushing | Spherical Inner Ring | ||
| Standard | RBPB | EN 1.1181 Equiv. | EN 1.3505 Equiv. (58HRC or more) | Special Copper Alloy | Hard Chrome Plating |
Specification Table
| Part Number |
| RBPB14 |
| Part Number | D | B | B1 | d1 | H | R | Ball Dia. ø(mm) | Allowable Inclination Angle | Static Load Capacity Radial Cs (kN) | Mass (g) | |||
| Type | d | α1° | α2° | α3° | |||||||||
| RBPB | 5 | 16 | 6 | 8 | 7.7 | 1 | 0.3 | 11.112 | 8 | 13 | 30 | 7.84 | 8.5 |
| 6 | 18 | 6.75 | 9 | 9 | 12.7 | 9.8 | 13 | ||||||
| 8 | 22 | 9 | 12 | 10.4 | 0.5 | 15.875 | 8 | 14 | 25 | 16.7 | 24 | ||
| 10 | 26 | 10.5 | 14 | 12.9 | 1.2 | 19.05 | 23.5 | 39 | |||||
| 12 | 30 | 12 | 16 | 15.4 | 1.5 | 22.225 | 13 | 31.4 | 58 | ||||
| 14 | 34 | 13.5 | 19 | 16.9 | 0.7 | 25.4 | 10 | 16 | 24 | 40.2 | 84 | ||
| 16 | 38 | 15 | 21 | 19.4 | 2.5 | 28.575 | 9 | 15 | 50 | 111 | |||
| 18 | 42 | 16.5 | 23 | 21.9 | 31.75 | 61.8 | 160 | ||||||
| 20 | 46 | 18 | 25 | 24.4 | 34.925 | 73.5 | 210 | ||||||
| 22 | 50 | 20 | 28 | 25.8 | 38.1 | 10 | 23 | 88.2 | 265 | ||||
| 25 | 56 | 22 | 31 | 29.6 | 3 | 0.8 | 42.862 | 9 | 111 | 390 | |||
| 30 | 66 | 25 | 37 | 34.8 | 50.8 | 10 | 17 | 148 | 610 | ||||
■Shaft Fits
■Gap between Holder and Inner Ring
| Usage Condition | Shaft | Housing | |
| Inner Ring Rotary Load | Normal Load | m6 | H7 |
| Non-directional Load | n6 | ||
| Outer Wheel Rotary Load | Normal Load | h7 | M7 |
| Non-directional Load | k6 | ||
| Standard | |
| Radial Direction Clearance | 0.035 mm or Less |
| Axial Clearance | 0.1 mm or less |
■Allowable Incline
| Shaft Step Shape | Shaft Condition | Allowable Inclination Angle α |
| Large | Stepped part of the shaft contacts the outer circumference of the holder. | Small (α1) |
| Medium | Stepped part of the shaft contacts the side or the inner circumference of the holder. | Medium (α2) |
| No | Shaft contacts the inner circumference of the holder. | Large (α3) |
Artikelnummerlista
Antal artiklar
Enhetspris (exklusive MOMS)(Enhetspris inklusive MOMS) | Standardavsändningsdatum |
|---|
11.97 € ( 14.24 € ) | Lagervara: 1 arbetsdagKan skickas samma dag |
11.97 € ( 14.24 € ) | Lagervara: 1 arbetsdagKan skickas samma dag |
13.47 € ( 16.03 € ) | Lagervara: 1 arbetsdagKan skickas samma dag |
13.99 € ( 16.65 € ) | Lagervara: 1 arbetsdagKan skickas samma dag |
16.62 € ( 19.78 € ) | Lagervara: 1 arbetsdagKan skickas samma dag |
18.77 € ( 22.34 € ) | 5 arbetsdagar |
24.18 € ( 28.77 € ) | Lagervara: 1 arbetsdagKan skickas samma dag |
29.84 € ( 35.51 € ) | 5 arbetsdagar |
36.65 € ( 43.61 € ) | 5 arbetsdagar |
43.20 €17.28 € ( 20.56 € ) | Lagervara: 1 arbetsdagKan skickas samma dag |
54.29 € ( 64.61 € ) | 5 arbetsdagar |
71.41 € ( 84.98 € ) | 5 arbetsdagar |
Detaljerad information
Grundläggande information
[Material] Support: EN 1.1181 Equiv., spherical inner ring: JIS-SUJ (rolling bearing steel)2 (58HRC or more), sleeves: special copper alloy with surface treatment options: spherical inner ring: hard chrome plating