Filtreringsvillkor
- Material
- Specifications
- Punch Hole Dia. D(φ)
- 5
- 8
- 10
- A(mm)[100-500/10mm units][100-500/1mm units]
- B(mm)[100-500/10mm units][100-500/1mm units]
- CAD
- 2D
- 3D
- Uppskattade leveransdagar
- Alla
- Inom 7 arbetsdagar
Perforated Metal / Round Hole Parallel Type
Artikelnummer:
kandidater hittades.Skiss och specifikationstabell
Dimensional Drawing
[Parallel Round Holes, 1 mm Increments]
PMRU
PMRUS
[Parallel Round Holes, 10 mm Increments ]
PMRF
PMRFS
[Slots]
PMLU
PMLUS
A, B Configurable: 1 mm Increments
Cut edges may interrupt the perforations, as shown above.
(Cut location cannot be specified.)
A, B Configurable: 10 mm Increments
As above drawing shows, no hole is interfered by cut edges.
| Type | [M] Material | [S] Surface Treatment |
| PMRU·PMRF·PMLU | EN 1.0038 Equiv. | Zinc Plating |
| PMRUS·PMRFS·PMLUS | EN 1.4301 Equiv. | — |
Specification Table
| Part Number | — | A | — | B |
| PMLU5 | — | 480 | — | 420 |
| Part Number | 1 mm increments | T | P | L | Perforated Rate % | ||
| Type | D | A | B | ||||
| PMRU PMRUS | 5 | 100 to 500 | 100 to 500 | 1.0 | 8 | — | 30.7 |
| 8 | 12 | — | 34.9 | ||||
| 10 | 15 | — | 34.9 | ||||
| PMLU PMLUS | 5 | 1.0 | 25 | 20 | 47.1 | ||
| Part Number | 10 mm increments | T | P | Perforated Rate % | ||
| Type | D | A | B | |||
| PMRF PMRFS | 5 | 100 to 500 | 100 to 500 | 1.0 | 10 | 19.6 |
Artikelnummerlista
Antal artiklar
| Artikelnummer |
|---|
Enhetspris (exklusive MOMS)(Enhetspris inklusive MOMS) | Standardavsändningsdatum |
|---|
- ( - ) | 7 arbetsdagar |
- ( - ) | 7 arbetsdagar |
- ( - ) | 7 arbetsdagar |
- ( - ) | 7 arbetsdagar |
- ( - ) | 7 arbetsdagar |
- ( - ) | 7 arbetsdagar |
- ( - ) | 7 arbetsdagar |
- ( - ) | 7 arbetsdagar |
- ( - ) | 7 arbetsdagar |
- ( - ) | 7 arbetsdagar |
