Filtreringsvillkor
- Material
- Specifications
- Punch Hole Dia. D(φ)
- 1
- 2
- A(mm)[30-200/1mm units]
- B(mm)[30-200/1mm units]
- L(mm)[30-300/1mm units]
- T(mm)
- 0.5
- 0.8
- 1
- CAD
- 2D
- Uppskattade leveransdagar
- Alla
- Inom 9 arbetsdagar
- Inom 14 arbetsdagar
Perforated Metal / L-Shaped
Artikelnummer:
kandidater hittades.Skiss och specifikationstabell
Dimensional Drawing
PMSL·PMUL
PMSU·PMUU
[ ! ] Hole positions on cut surface cannot be specified (The curved section doesn't always have holes).
| T | A, B Tolerance | W Tolerance | H Tolerance |
| 0.5 | ±0.5 | ±1.0 | ±0.5 |
| 0.8 | ±0.8 | ±1.6 | ±0.8 |
| 1.0 | ±1.0 | ±2.0 | ±1.0 |
| Type | [M] Material | [S] Surface Treatment | |
| L-Shaped | U-Shaped | ||
| PMSL | PMSU | EN 1.0330 Equiv. | Nickel Plating |
| PMUL | PMUU | EN 1.4301 Equiv. | — |
Specification Table
■L-Shaped
■U-Shaped
| Part Number | 1 mm Increments | T Selection | P | Perforated Rate % | ||||
| Type | D | A | B | L | PMSL | PMUL | ||
| PMSL PMUL | 1 | 30 to 200 | 30 to 200 | 30 to 300 | 0.5 0.8 | 0.5 0.8 | 2 | 22.6 |
| 2 | 0.5 0.8 1.0 | 1.0 | 3 | 40.2 | ||||
| Part Number | 1 mm Increments | T Selection | P | Perforated Rate % | ||||||||
| Type | D | W | H | L | PMSU | PMUU | ||||||
| PMSU PMUU | 1 | 60 to 200 | 30 to 100 (H ≤ W/2) | 30 to 300 | 0.5 | 0.8 | 0.5 | 0.8 | 2 | 22.6 | ||
| 2 | 0.5 | 0.8 | 1.0 | 1.0 | 3 | 40.2 | ||||||
| Part Number | — | A | — | B | — | L | — | T |
| PMUL2 | — | 100 | — | 50 | — | 200 | — | 1.0 |
| Part Number | — | W | — | H | — | L | — | T |
| PMSU1 | — | 120 | — | 60 | — | 200 | — | 0.8 |
Alterations
·L-Shaped
| Part Number | — | A | — | B | — | L | — | T | — | (XC·XWC·XTC) |
| PMSL1 | — | 100 | — | 70 | — | 200 | — | 0.8 | — | XC4.5−F45−G15 |
·U-Shaped
| Part Number | — | W | — | H | — | L | — | T | — | (XWC·XTC) |
| PMSU2 | — | 120 | — | 60 | — | 85 | — | 1.0 | — | XWC4.5−F25−G10 |
| Alterations | 2 Mounting Holes | 4 Mounting Holes | 6 Mounting Holes | ||||||
 | ·L-Shaped ·U-Shaped | ·L-Shaped ·U-Shaped | |||||||
| Code | XC | XWC | XTC | ||||||
| Spec. | * Adds 2 mounting holes. XC = Hole Dia. Selection F, G = 1 mm Increments Ordering Code XC4.5−F45−G15 [ ! ] Hole Dia. Selection Table
[ ! ]XC/2+3 ≤ G ≤ (A−T) −XC/2−6 [ ! ] Applicable to L-shaped type only | * Adds 4 mounting holes. XWC = Hole Dia. Selection F, G = 1 mm Increments Ordering Code XWC4.5−F55−G12 [ ! ] Hole Dia. Selection Table
·L-Shaped Type [!] XWC + 3 ≤ G ≤ [A (B) - T] - XWC/2 - 6 ·U-Shaped Type [!] XWC/2 + 3 ≤ G ≤ (H - T) - XWC/2 - 6 | * Adds 6 mounting holes. XTC = Hole Dia. Selection F, G = 1 mm Increments Ordering Code XTC5.5−F25−G15 [ ! ] Hole Dia. Selection Table
·L-Shaped Type [!] XTC + 3 ≤ G ≤ [A (B) - T] - XTC/2 - 6 ·U-Shaped Type [!] XTC/2 + 3 ≤ G ≤ (H - T) - XTC/2 - 6 |
Artikelnummerlista
Antal artiklar
| Artikelnummer |
|---|
Enhetspris (exklusive MOMS)(Enhetspris inklusive MOMS) | Standardavsändningsdatum |
|---|
- ( - ) | 14 arbetsdagar |
- ( - ) | 14 arbetsdagar |
- ( - ) | 14 arbetsdagar |
- ( - ) | 14 arbetsdagar |
- ( - ) | 9 arbetsdagar |
- ( - ) | 9 arbetsdagar |
- ( - ) | 9 arbetsdagar |
- ( - ) | 9 arbetsdagar |