Filtreringsvillkor
- Material
- Carbon steel
- EN 1.0038 Equiv.
- Aluminum
- Aluminum Alloy 6000 series
- Surface Treatment
- Available
- Black Anodize
- Black Oxide
- Bright Chrome Plating
- Clear Anodize
- Electroless Nickel Plating
- Trivalent Chromate
- T (Plate Thickness)(mm)
- 5
- 6
- 10
- 12
- 15
- A(mm)[20-150/1mm units]
- B(mm)[20-150/1mm units]
- L(mm)[25-300/1mm units]
- CAD
- 3D
- Uppskattade leveransdagar
- Alla
- Inom 9 arbetsdagar
- Inom 17 arbetsdagar
- Inom 22 arbetsdagar
L-Shaped Angles / Surface Treated / Perpendicularity Configurable
Artikelnummer:
kandidater hittades.Skiss och specifikationstabell
Dimensional Drawing
 | Angles have no holes by default. Upon plating treatment, the SS materials and the aluminum alloys are tied and are hung by steel wire and aluminum wire, respectively. Areas tied by wire may be discolored after treatment as shown below.  |
| [M] Material | [ S ] Surface treatment | Code |
| EN 1.0038 Equiv. | Black Oxide | BLAS |
| Electroless Nickel Plating | MLAS | |
| Bright Chromate | YLAS | |
| Trivalent Chromate | SLAS | |
| EN AW−6063 Equiv. | Clear Anodize | WLAA |
| Black Anodize | ELAA |
Specification Table
| Part Number | — | A | — | B | — | L |
| BLAS10 | — | A75 | — | B50 | — | L100 |
[T]Tolerance
| T | A | B | L |
| ±0.3 | ±0.5 | ±0.5 | ±0.5 |
| T Dimension | Longitudinal sides of A and B dims. | Perpendicularity k |
| 5·6 | Min. to 75 | 0.05 |
| 10 | Min. to 80 | 0.05 |
| 81 to 125 | 0.1 | |
| 12·15 | Min. to 80 | 0.05 |
| 81 to 125 | 0.1 | |
| 15 | 126 to 150 | 0.35 |
| Part Number | 1 mm increments | |||
| Type | T | A | B | L |
| BLAS MLAS YLAS SLAS | 5 | 20 to 75 | 20 to 75 | 25 to 300 |
| 6 | ||||
| 10 | 25 to 125 | 25 to 125 | ||
| 12 | 50 to 125 | 50 to 125 | 50 to 300 | |
| 15 | 50 to 150 | 50 to 150 | ||
| WLAA ELAA | 5 | 20 to 75 | 20 to 75 | 25 to 300 |
| 6 | ||||
| 10 | 25 to 100 | 25 to 100 | ||
| 12 | 50 to 125 | 50 to 125 | 50 to 300 | |
Alterations
| Alterations Code | Alteration Details | Ordering Code | ||||||
| CCA CCB CCC CCD | Corner Cut | Any corner can be cut. 1 ≤ Corner cut ≤ 30: 1 mm Increments | Example: When the corners of A and D are cut by C5 ➡CCA5－CCD5 BLAS10-A120-B120-L150-CKC-CCA5-CCD5 | |||||
| CKC | Side perpendicularity guaranteed | Both sides of dimension L are machined to be perpendicular to surface A. | BLAS10-A120-B120-L150-CKC | |||||
Artikelnummerlista
Antal artiklar
| Artikelnummer |
|---|
Enhetspris (exklusive MOMS)(Enhetspris inklusive MOMS) | Standardavsändningsdatum |
|---|
- ( - ) | 9 arbetsdagar |
- ( - ) | 9 arbetsdagar |
- ( - ) | 9 arbetsdagar |
- ( - ) | 9 arbetsdagar |
- ( - ) | 9 arbetsdagar |
- ( - ) | 9 arbetsdagar |
- ( - ) | 9 arbetsdagar |
- ( - ) | 9 arbetsdagar |
- ( - ) | 9 arbetsdagar |
- ( - ) | 9 arbetsdagar |
- ( - ) | 9 arbetsdagar |
- ( - ) | 9 arbetsdagar |
- ( - ) | 9 arbetsdagar |
- ( - ) | 9 arbetsdagar |
- ( - ) | 17 arbetsdagar |
- ( - ) | 17 arbetsdagar |
- ( - ) | 17 arbetsdagar |
- ( - ) | 17 arbetsdagar |
- ( - ) | 17 arbetsdagar |
- ( - ) | 9 arbetsdagar |
- ( - ) | 9 arbetsdagar |
- ( - ) | 9 arbetsdagar |
- ( - ) | 9 arbetsdagar |
- ( - ) | 22 arbetsdagar |
- ( - ) | 22 arbetsdagar |
- ( - ) | 22 arbetsdagar |
- ( - ) | 22 arbetsdagar |
- ( - ) | 22 arbetsdagar |
Detaljerad information
Grundläggande information
[Features] Precision angle, also with surface treatment, which guarantees external squareness.