MISUMIS START
Automation Components
Linear Motion
Ball Screws
Ball screws / compact flange / diameter 8 - 32 / pitch 2 - 32 / C10 / configurable / steel / LTBC / 58-62HRC

Filtreringsvillkor

Ball screws / compact flange / diameter 8 - 32 / pitch 2 - 32 / C10 / configurable / steel / LTBC / 58-62HRC

KatalogS.1-727

Artikelnummer:

Ej färdigt: 2,135 kandidater hittades.

Skiss och specifikationstabell
Artikelnummerlista
Detaljerad information
Katalog

Skiss och specifikationstabell

Back to the Category Ball Screws

Technical Drawing - Ball Screws

Rolled Ball Screws/Shaft Ends Configurable/Standard Nuts:Related Image

Open the technical drawing in the new window

Available dimensions and tolerances can be found under the tab More information.

Basic Properties (e.g., material, hardness, coating, tolerance) - Ball Screws

Nut Type	Type	Screw Shaft			Nut
		Material	Hardness	Surface Treatment	Material	Hardness	Surface Treatment
Standard Nut	FBSSR	EN 1.1203 Equiv.	Induction Hardened 56 ~ 62HRC	Phosphate Conversion Coating	EN 1.7264 Equiv.	Carburized 58~62HRC	Low Temperature Black Chrome (Screw Shafts 8 and 10 are applied with Phosphate Conversion Coating)
	FBSSZ			-

Further specifications can be found under the tab More information.

Composition of a Product Code - Ball Screws

Part Number	-	L	-	F	-	P	-	S	-	V	-	U	-	C	-	KC	-	E	-	SC	-	X	-	Z	-	G	-	Q	-	K	-	N	-	J	-	JC	-	H	-	Y	-	W	-	R
FBSSRAA1004 FBSSZDJ2010	- -	450 1200	-	F36	-	P12	-	S60	-	V15	-	U15													-	G20	-	Q15			-	N10

Alterations - Ball Screws

Artikelnummerlista

Antal artiklar

...

Nästa

Artikelnummer

FBSSRAA0802-[100-400/1]

FBSSRAA0804-[100-380/1]

FBSSRAA1002-[150-585/1]

FBSSRAA1004-[150-600/1]

FBSSRAA1010-[150-585/1]

FBSSRAA1204-[150-800/1]

FBSSRAA1210-[150-800/1]

FBSSRAA1405-[150-800/1]

FBSSRAA1505-[150-1200/1]

FBSSRAA1510-[200-1200/1]

FBSSRAA1520-[200-1200/1]

FBSSRAA2005-[200-2000/1]

FBSSRAA2010-[250-2000/1]

FBSSRAA2020-[250-2000/1]

FBSSRAA2505-[200-2000/1]

FBSSRAA2510-[300-2000/1]

FBSSRAA2525-[300-2000/1]

FBSSRAA2806-[200-2000/1]

FBSSRAA3210-[300-2000/1]

FBSSRAA3232-[300-2000/1]

FBSSRAJ0802-[100-400/1]-F[5-12/1]-P4-S[5-24/1]-V6-U[6-12/1]

FBSSRAJ0804-[100-380/1]-F[5-12/1]-P4-S[5-24/1]-V6-U[6-12/1]

FBSSRAJ1002-[150-585/1]-F[5-18/1]-P[4,5,6]-S[5-32/1]-V8-U[8-16/1]

FBSSRAJ1004-[150-600/1]-F[5-13/1]-P[4,5,6]-S[5-32/1]-V8-U[8-16/1]

FBSSRAJ1010-[150-585/1]-F[5-13/1]-P[4,5,6]-S[5-32/1]-V8-U[8-16/1]

FBSSRAJ1204-[150-800/1]-F[5-24/1]-P[4-8/1]-S[5-40/1]-V[8,10]-U[8-20/1]

FBSSRAJ1210-[150-800/1]-F[5-24/1]-P[4-8/1]-S[5-40/1]-V[8,10]-U[8-20/1]

FBSSRAJ1405-[150-800/1]-F[5-24/1]-P[4-8/1]-S[5-40/1]-V[8,10]-U[8-20/1]

FBSSRAJ1505-[150-1200/1]-F[5-30/1]-P[4-10/1]-S[5-48/1]-V[10,12]-U[10-24/1]

FBSSRAJ1510-[200-1200/1]-F[5-30/1]-P[4-10/1]-S[5-48/1]-V[10,12]-U[10-24/1]

FBSSRAJ1520-[200-1200/1]-F[5-30/1]-P[4-10/1]-S[5-48/1]-V[10,12]-U[10-24/1]

FBSSRAJ2005-[200-2000/1]-F[5-39/1]-P[4-13/1]-S[5-60/1]-V[10,12,15]-U[10-30/1]

FBSSRAJ2010-[250-2000/1]-F[5-39/1]-P[4-13/1]-S[5-60/1]-V[10,12,15]-U[10-30/1]

FBSSRAJ2020-[250-2000/1]-F[5-39/1]-P[4-13/1]-S[5-60/1]-V[10,12,15]-U[10-30/1]

FBSSRAJ2505-[200-2000/1]-F[5-54/1]-P[4-18/1]-S[5-80/1]-V[15,20]-U[15-40/1]

FBSSRAJ2510-[300-2000/1]-F[5-54/1]-P[4-18/1]-S[5-80/1]-V[15,20]-U[15-40/1]

FBSSRAJ2525-[300-2000/1]-F[5-54/1]-P[4-18/1]-S[5-80/1]-V[15,20]-U[15-40/1]

FBSSRAJ2806-[200-2000/1]-F[5-54/1]-P[4-18/1]-S[5-80/1]-V[15,20]-U[15-40/1]

FBSSRAJ3210-[300-2000/1]-F[5-69/1]-P[4-23/1]-S[5-100/1]-V[20,25]-U[20-50/1]

FBSSRAJ3232-[300-2000/1]-F[5-69/1]-P[4-23/1]-S[5-100/1]-V[20,25]-U[20-50/1]

FBSSRAK1002-[150-585/1]-F[5-13/1]-P[4,5,6]-S[5-32/1]-V8-U[8-16/1]-C[2-11/1]-KC[0-11/1]

FBSSRAK1004-[150-600/1]-F[5-13/1]-P[4,5,6]-S[5-32/1]-V8-U[8-16/1]-C[2-11/1]-KC[0-11/1]

FBSSRAK1010-[150-585/1]-F[5-13/1]-P[4,5,6]-S[5-32/1]-V8-U[8-16/1]-C[2-11/1]-KC[0-11/1]

FBSSRAK1204-[150-800/1]-F[5-24/1]-P[4-8/1]-S[5-40/1]-V[8,10]-U[8-20/1]-C[2-22/1]-KC[0-22/1]

FBSSRAK1210-[150-800/1]-F[5-24/1]-P[4-8/1]-S[5-40/1]-V[8,10]-U[8-20/1]-C[2-22/1]-KC[0-22/1]

FBSSRAK1405-[150-800/1]-F[5-24/1]-P[4-8/1]-S[5-40/1]-V[8,10]-U[8-20/1]-C[2-22/1]-KC[0-22/1]

FBSSRAK1505-[150-1200/1]-F[5-30/1]-P[4-10/1]-S[5-48/1]-V[10,12]-U[10-24/1]-C[2-28/1]-KC[0-28/1]

FBSSRAK1510-[200-1200/1]-F[5-30/1]-P[4-10/1]-S[5-48/1]-V[10,12]-U[10-24/1]-C[2-28/1]-KC[0-28/1]

FBSSRAK1520-[200-1200/1]-F[5-30/1]-P[4-10/1]-S[5-48/1]-V[10,12]-U[10-24/1]-C[2-28/1]-KC[0-28/1]

FBSSRAK2005-[200-2000/1]-F[5-39/1]-P[4-13/1]-S[5-60/1]-V[10,12,15]-U[10-30/1]-C[2-37/1]-KC[0-37/1]

FBSSRAK2010-[250-2000/1]-F[5-39/1]-P[4-13/1]-S[5-60/1]-V[10,12,15]-U[10-30/1]-C[2-37/1]-KC[0-37/1]

FBSSRAK2020-[250-2000/1]-F[5-39/1]-P[4-13/1]-S[5-60/1]-V[10,12,15]-U[10-30/1]-C[2-37/1]-KC[0-37/1]

FBSSRAK2505-[200-2000/1]-F[5-54/1]-P[4-18/1]-S[5-80/1]-V[15,20]-U[15-40/1]-C[2-52/1]-KC[0-52/1]

FBSSRAK2510-[300-2000/1]-F[5-54/1]-P[4-18/1]-S[5-80/1]-V[15,20]-U[15-40/1]-C[2-52/1]-KC[0-52/1]

FBSSRAK2525-[300-2000/1]-F[5-54/1]-P[4-18/1]-S[5-80/1]-V[15,20]-U[15-40/1]-C[2-52/1]-KC[0-52/1]

FBSSRAK2806-[200-2000/1]-F[5-54/1]-P[4-18/1]-S[5-80/1]-V[15,20]-U[15-40/1]-C[2-52/1]-KC[0-52/1]

FBSSRAK3210-[300-2000/1]-F[5-69/1]-P[4-23/1]-S[5-100/1]-V[20,25]-U[20-50/1]-C[2-67/1]-KC[0-67/1]

FBSSRAK3232-[300-2000/1]-F[5-69/1]-P[4-23/1]-S[5-100/1]-V[20,25]-U[20-50/1]-C[2-67/1]-KC[0-67/1]

FBSSRAM1204-[150-800/1]-F[5-24/1]-P[4-8/1]-S[5-40/1]-V[8,10]-U[8-20/1]-E[4,5,6]

FBSSRAM1210-[150-800/1]-F[5-24/1]-P[4-8/1]-S[5-40/1]-V[8,10]-U[8-20/1]-E[4,5,6]

Screw Shaft O.D.

(mm)

Lead

(mm)

Axial Play

Number of Circuits

(Rows x Windings)

Shaft Overall Length L

(mm)

Basic Load Rating Dynamic Rating

(N)

Basic Load Rating Static Rating

(N)

Shaft End Shape on Support Side

Fixed Side Shaft End Shape

Shaft End Length F

(mm)

Screw Shaft Surface Treatment

(mm)

Shaft Dia. P

(φ)

(mm)

RoHS?

Minsta beställningsantal

8	2	0.05 or Less	1 x 3.5	100 ～ 400	1800	3200	A (No Shaft End machining)	A (No Shaft End machining)	-	Phosphate Coating	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	10	1 stycken
8	4	0.05 or Less	1 x 2.5	100 ～ 380	1900	3100	A (No Shaft End machining)	A (No Shaft End machining)	-	Phosphate Coating	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	10	1 stycken
10	2	0.05 or Less	1 x 2.5	150 ～ 585	1700	3000	A (No Shaft End machining)	A (No Shaft End machining)	-	Phosphate Coating	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	10	1 stycken
10	4	0.05 or Less	1 x 2.5	150 ～ 600	2300	4800	A (No Shaft End machining)	A (No Shaft End machining)	-	Phosphate Coating	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	10	1 stycken
10	10	0.05 or Less	1 x 1.5	150 ～ 585	1850	3200	A (No Shaft End machining)	A (No Shaft End machining)	-	Phosphate Coating	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	10	1 stycken
12	4	0.05 or Less	1 x 2.5	150 ～ 800	2600	5800	A (No Shaft End machining)	A (No Shaft End machining)	-	Phosphate Coating	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	10	1 stycken
12	10	[0.10 or Less] 0.10 or Less	1 x 1.5	150 ～ 800	2850	4950	A (No Shaft End machining)	A (No Shaft End machining)	-	Phosphate Coating	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	10	1 stycken
14	5	[0.10 or Less] 0.10 or Less	1 x 2.5	150 ～ 800	4400	7300	A (No Shaft End machining)	A (No Shaft End machining)	-	Phosphate Coating	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	10	1 stycken
15	5	[0.10 or Less] 0.10 or Less	1 x 2.5	150 ～ 1200	5100	10500	A (No Shaft End machining)	A (No Shaft End machining)	-	Phosphate Coating	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	10	1 stycken
15	10	[0.10 or Less] 0.10 or Less	1 x 2.5	200 ～ 1200	5100	10500	A (No Shaft End machining)	A (No Shaft End machining)	-	Phosphate Coating	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	10	1 stycken
15	20	[0.10 or Less] 0.10 or Less	2 x 1.5	200 ～ 1200	5800	13300	A (No Shaft End machining)	A (No Shaft End machining)	-	Phosphate Coating	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	10	1 stycken
20	5	[0.10 or Less] 0.10 or Less	1 x 2.5	200 ～ 2000	6200	14700	A (No Shaft End machining)	A (No Shaft End machining)	-	Phosphate Coating	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	10	1 stycken
20	10	[0.2 or Less] 0.15 or Less	1 x 2.5	250 ～ 2000	10600	22700	A (No Shaft End machining)	A (No Shaft End machining)	-	Phosphate Coating	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	10	1 stycken
20	20	[0.10 or Less] 0.10 or Less	1 x 2.5	250 ～ 2000	6200	14700	A (No Shaft End machining)	A (No Shaft End machining)	-	Phosphate Coating	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	10	1 stycken
25	5	[0.10 or Less] 0.10 or Less	1 x 2.5	200 ～ 2000	6600	18700	A (No Shaft End machining)	A (No Shaft End machining)	-	Phosphate Coating	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	10	1 stycken
25	10	[0.2 or Less] 0.20 or Less	2 x 2.5	300 ～ 2000	27500	76300	A (No Shaft End machining)	A (No Shaft End machining)	-	Phosphate Coating	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	10	1 stycken
25	25	[0.2 or Less] 0.12 or Less	1 x 2.5	300 ～ 2000	9300	22700	A (No Shaft End machining)	A (No Shaft End machining)	-	Phosphate Coating	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	10	1 stycken
28	6	[0.10 or Less] 0.10 or Less	2 x 2.5	200 ～ 2000	12100	42300	A (No Shaft End machining)	A (No Shaft End machining)	-	Phosphate Coating	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	10	1 stycken
32	10	[0.2 or Less] 0.20 or Less	2 x 2.5	300 ～ 2000	32800	86700	A (No Shaft End machining)	A (No Shaft End machining)	-	Phosphate Coating	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	10	1 stycken
32	32	[0.2 or Less] 0.15 or Less	2 x 1.5	300 ～ 2000	14600	38900	A (No Shaft End machining)	A (No Shaft End machining)	-	Phosphate Coating	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	10	1 stycken
8	2	0.05 or Less	1 x 3.5	100 ～ 400	1800	3200	A (No Shaft End machining)	J (Double Stepped End machining)	5 ～ 12	Phosphate Coating	-	-	-	-	-	-	-	-	-	-	-	5 ～ 24	-	4	6 ～ 12	6	-	-	-	-	10	1 stycken
8	4	0.05 or Less	1 x 2.5	100 ～ 380	1900	3100	A (No Shaft End machining)	J (Double Stepped End machining)	5 ～ 12	Phosphate Coating	-	-	-	-	-	-	-	-	-	-	-	5 ～ 24	-	4	6 ～ 12	6	-	-	-	-	10	1 stycken
10	2	0.05 or Less	1 x 2.5	150 ～ 585	1700	3000	A (No Shaft End machining)	J (Double Stepped End machining)	5 ～ 18	Phosphate Coating	-	-	-	-	-	-	-	-	-	-	-	5 ～ 32	-	4 ～ 6	8 ～ 16	8	-	-	-	-	10	1 stycken
10	4	0.05 or Less	1 x 2.5	150 ～ 600	2300	4800	A (No Shaft End machining)	J (Double Stepped End machining)	5 ～ 13	Phosphate Coating	-	-	-	-	-	-	-	-	-	-	-	5 ～ 32	-	4 ～ 6	8 ～ 16	8	-	-	-	-	10	1 stycken
10	10	0.05 or Less	1 x 1.5	150 ～ 585	1850	3200	A (No Shaft End machining)	J (Double Stepped End machining)	5 ～ 13	Phosphate Coating	-	-	-	-	-	-	-	-	-	-	-	5 ～ 32	-	4 ～ 6	8 ～ 16	8	-	-	-	-	10	1 stycken
12	4	0.05 or Less	1 x 2.5	150 ～ 800	2600	5800	A (No Shaft End machining)	J (Double Stepped End machining)	5 ～ 24	Phosphate Coating	-	-	-	-	-	-	-	-	-	-	-	5 ～ 40	-	4 ～ 8	8 ～ 20	8 ～ 10	-	-	-	-	10	1 stycken
12	10	[0.10 or Less] 0.10 or Less	1 x 1.5	150 ～ 800	2850	4950	A (No Shaft End machining)	J (Double Stepped End machining)	5 ～ 24	Phosphate Coating	-	-	-	-	-	-	-	-	-	-	-	5 ～ 40	-	4 ～ 8	8 ～ 20	8 ～ 10	-	-	-	-	10	1 stycken
14	5	[0.10 or Less] 0.10 or Less	1 x 2.5	150 ～ 800	4400	7300	A (No Shaft End machining)	J (Double Stepped End machining)	5 ～ 24	Phosphate Coating	-	-	-	-	-	-	-	-	-	-	-	5 ～ 40	-	4 ～ 8	8 ～ 20	8 ～ 10	-	-	-	-	10	1 stycken
15	5	[0.10 or Less] 0.10 or Less	1 x 2.5	150 ～ 1200	5100	10500	A (No Shaft End machining)	J (Double Stepped End machining)	5 ～ 30	Phosphate Coating	-	-	-	-	-	-	-	-	-	-	-	5 ～ 48	-	4 ～ 10	10 ～ 24	10 ～ 12	-	-	-	-	10	1 stycken
15	10	[0.10 or Less] 0.10 or Less	1 x 2.5	200 ～ 1200	5100	10500	A (No Shaft End machining)	J (Double Stepped End machining)	5 ～ 30	Phosphate Coating	-	-	-	-	-	-	-	-	-	-	-	5 ～ 48	-	4 ～ 10	10 ～ 24	10 ～ 12	-	-	-	-	10	1 stycken
15	20	[0.10 or Less] 0.10 or Less	2 x 1.5	200 ～ 1200	5800	13300	A (No Shaft End machining)	J (Double Stepped End machining)	5 ～ 30	Phosphate Coating	-	-	-	-	-	-	-	-	-	-	-	5 ～ 48	-	4 ～ 10	10 ～ 24	10 ～ 12	-	-	-	-	10	1 stycken
20	5	[0.10 or Less] 0.10 or Less	1 x 2.5	200 ～ 2000	6200	14700	A (No Shaft End machining)	J (Double Stepped End machining)	5 ～ 39	Phosphate Coating	-	-	-	-	-	-	-	-	-	-	-	5 ～ 60	-	4 ～ 13	10 ～ 30	10 ～ 15	-	-	-	-	10	1 stycken
20	10	[0.2 or Less] 0.15 or Less	1 x 2.5	250 ～ 2000	10600	22700	A (No Shaft End machining)	J (Double Stepped End machining)	5 ～ 39	Phosphate Coating	-	-	-	-	-	-	-	-	-	-	-	5 ～ 60	-	4 ～ 13	10 ～ 30	10 ～ 15	-	-	-	-	10	1 stycken
20	20	[0.10 or Less] 0.10 or Less	1 x 2.5	250 ～ 2000	6200	14700	A (No Shaft End machining)	J (Double Stepped End machining)	5 ～ 39	Phosphate Coating	-	-	-	-	-	-	-	-	-	-	-	5 ～ 60	-	4 ～ 13	10 ～ 30	10 ～ 15	-	-	-	-	10	1 stycken
25	5	[0.10 or Less] 0.10 or Less	1 x 2.5	200 ～ 2000	6600	18700	A (No Shaft End machining)	J (Double Stepped End machining)	5 ～ 54	Phosphate Coating	-	-	-	-	-	-	-	-	-	-	-	5 ～ 80	-	4 ～ 18	15 ～ 40	15 ～ 20	-	-	-	-	10	1 stycken
25	10	[0.2 or Less] 0.20 or Less	2 x 2.5	300 ～ 2000	27500	76300	A (No Shaft End machining)	J (Double Stepped End machining)	5 ～ 54	Phosphate Coating	-	-	-	-	-	-	-	-	-	-	-	5 ～ 80	-	4 ～ 18	15 ～ 40	15 ～ 20	-	-	-	-	10	1 stycken
25	25	[0.2 or Less] 0.12 or Less	1 x 2.5	300 ～ 2000	9300	22700	A (No Shaft End machining)	J (Double Stepped End machining)	5 ～ 54	Phosphate Coating	-	-	-	-	-	-	-	-	-	-	-	5 ～ 80	-	4 ～ 18	15 ～ 40	15 ～ 20	-	-	-	-	10	1 stycken
28	6	[0.10 or Less] 0.10 or Less	2 x 2.5	200 ～ 2000	12100	42300	A (No Shaft End machining)	J (Double Stepped End machining)	5 ～ 54	Phosphate Coating	-	-	-	-	-	-	-	-	-	-	-	5 ～ 80	-	4 ～ 18	15 ～ 40	15 ～ 20	-	-	-	-	10	1 stycken
32	10	[0.2 or Less] 0.20 or Less	2 x 2.5	300 ～ 2000	32800	86700	A (No Shaft End machining)	J (Double Stepped End machining)	5 ～ 69	Phosphate Coating	-	-	-	-	-	-	-	-	-	-	-	5 ～ 100	-	4 ～ 23	20 ～ 50	20 ～ 25	-	-	-	-	10	1 stycken
32	32	[0.2 or Less] 0.15 or Less	2 x 1.5	300 ～ 2000	14600	38900	A (No Shaft End machining)	J (Double Stepped End machining)	5 ～ 69	Phosphate Coating	-	-	-	-	-	-	-	-	-	-	-	5 ～ 100	-	4 ～ 23	20 ～ 50	20 ～ 25	-	-	-	-	10	1 stycken
10	2	0.05 or Less	1 x 2.5	150 ～ 585	1700	3000	A (No Shaft End machining)	K (Double Stepped, Keyway machining)	5 ～ 13	Phosphate Coating	2 ～ 11	-	-	-	-	-	-	0 ～ 11	-	-	-	5 ～ 32	-	4 ～ 6	8 ～ 16	8	-	-	-	-	10	1 stycken
10	4	0.05 or Less	1 x 2.5	150 ～ 600	2300	4800	A (No Shaft End machining)	K (Double Stepped, Keyway machining)	5 ～ 13	Phosphate Coating	2 ～ 11	-	-	-	-	-	-	0 ～ 11	-	-	-	5 ～ 32	-	4 ～ 6	8 ～ 16	8	-	-	-	-	10	1 stycken
10	10	0.05 or Less	1 x 1.5	150 ～ 585	1850	3200	A (No Shaft End machining)	K (Double Stepped, Keyway machining)	5 ～ 13	Phosphate Coating	2 ～ 11	-	-	-	-	-	-	0 ～ 11	-	-	-	5 ～ 32	-	4 ～ 6	8 ～ 16	8	-	-	-	-	10	1 stycken
12	4	0.05 or Less	1 x 2.5	150 ～ 800	2600	5800	A (No Shaft End machining)	K (Double Stepped, Keyway machining)	5 ～ 24	Phosphate Coating	2 ～ 22	-	-	-	-	-	-	0 ～ 22	-	-	-	5 ～ 40	-	4 ～ 8	8 ～ 20	8 ～ 10	-	-	-	-	10	1 stycken
12	10	[0.10 or Less] 0.10 or Less	1 x 1.5	150 ～ 800	2850	4950	A (No Shaft End machining)	K (Double Stepped, Keyway machining)	5 ～ 24	Phosphate Coating	2 ～ 22	-	-	-	-	-	-	0 ～ 22	-	-	-	5 ～ 40	-	4 ～ 8	8 ～ 20	8 ～ 10	-	-	-	-	10	1 stycken
14	5	[0.10 or Less] 0.10 or Less	1 x 2.5	150 ～ 800	4400	7300	A (No Shaft End machining)	K (Double Stepped, Keyway machining)	5 ～ 24	Phosphate Coating	2 ～ 22	-	-	-	-	-	-	0 ～ 22	-	-	-	5 ～ 40	-	4 ～ 8	8 ～ 20	8 ～ 10	-	-	-	-	10	1 stycken
15	5	[0.10 or Less] 0.10 or Less	1 x 2.5	150 ～ 1200	5100	10500	A (No Shaft End machining)	K (Double Stepped, Keyway machining)	5 ～ 30	Phosphate Coating	2 ～ 28	-	-	-	-	-	-	0 ～ 28	-	-	-	5 ～ 48	-	4 ～ 10	10 ～ 24	10 ～ 12	-	-	-	-	10	1 stycken
15	10	[0.10 or Less] 0.10 or Less	1 x 2.5	200 ～ 1200	5100	10500	A (No Shaft End machining)	K (Double Stepped, Keyway machining)	5 ～ 30	Phosphate Coating	2 ～ 28	-	-	-	-	-	-	0 ～ 28	-	-	-	5 ～ 48	-	4 ～ 10	10 ～ 24	10 ～ 12	-	-	-	-	10	1 stycken
15	20	[0.10 or Less] 0.10 or Less	2 x 1.5	200 ～ 1200	5800	13300	A (No Shaft End machining)	K (Double Stepped, Keyway machining)	5 ～ 30	Phosphate Coating	2 ～ 28	-	-	-	-	-	-	0 ～ 28	-	-	-	5 ～ 48	-	4 ～ 10	10 ～ 24	10 ～ 12	-	-	-	-	10	1 stycken
20	5	[0.10 or Less] 0.10 or Less	1 x 2.5	200 ～ 2000	6200	14700	A (No Shaft End machining)	K (Double Stepped, Keyway machining)	5 ～ 39	Phosphate Coating	2 ～ 37	-	-	-	-	-	-	0 ～ 37	-	-	-	5 ～ 60	-	4 ～ 13	10 ～ 30	10 ～ 15	-	-	-	-	10	1 stycken
20	10	[0.2 or Less] 0.15 or Less	1 x 2.5	250 ～ 2000	10600	22700	A (No Shaft End machining)	K (Double Stepped, Keyway machining)	5 ～ 39	Phosphate Coating	2 ～ 37	-	-	-	-	-	-	0 ～ 37	-	-	-	5 ～ 60	-	4 ～ 13	10 ～ 30	10 ～ 15	-	-	-	-	10	1 stycken
20	20	[0.10 or Less] 0.10 or Less	1 x 2.5	250 ～ 2000	6200	14700	A (No Shaft End machining)	K (Double Stepped, Keyway machining)	5 ～ 39	Phosphate Coating	2 ～ 37	-	-	-	-	-	-	0 ～ 37	-	-	-	5 ～ 60	-	4 ～ 13	10 ～ 30	10 ～ 15	-	-	-	-	10	1 stycken
25	5	[0.10 or Less] 0.10 or Less	1 x 2.5	200 ～ 2000	6600	18700	A (No Shaft End machining)	K (Double Stepped, Keyway machining)	5 ～ 54	Phosphate Coating	2 ～ 52	-	-	-	-	-	-	0 ～ 52	-	-	-	5 ～ 80	-	4 ～ 18	15 ～ 40	15 ～ 20	-	-	-	-	10	1 stycken
25	10	[0.2 or Less] 0.20 or Less	2 x 2.5	300 ～ 2000	27500	76300	A (No Shaft End machining)	K (Double Stepped, Keyway machining)	5 ～ 54	Phosphate Coating	2 ～ 52	-	-	-	-	-	-	0 ～ 52	-	-	-	5 ～ 80	-	4 ～ 18	15 ～ 40	15 ～ 20	-	-	-	-	10	1 stycken
25	25	[0.2 or Less] 0.12 or Less	1 x 2.5	300 ～ 2000	9300	22700	A (No Shaft End machining)	K (Double Stepped, Keyway machining)	5 ～ 54	Phosphate Coating	2 ～ 52	-	-	-	-	-	-	0 ～ 52	-	-	-	5 ～ 80	-	4 ～ 18	15 ～ 40	15 ～ 20	-	-	-	-	10	1 stycken
28	6	[0.10 or Less] 0.10 or Less	2 x 2.5	200 ～ 2000	12100	42300	A (No Shaft End machining)	K (Double Stepped, Keyway machining)	5 ～ 54	Phosphate Coating	2 ～ 52	-	-	-	-	-	-	0 ～ 52	-	-	-	5 ～ 80	-	4 ～ 18	15 ～ 40	15 ～ 20	-	-	-	-	10	1 stycken
32	10	[0.2 or Less] 0.20 or Less	2 x 2.5	300 ～ 2000	32800	86700	A (No Shaft End machining)	K (Double Stepped, Keyway machining)	5 ～ 69	Phosphate Coating	2 ～ 67	-	-	-	-	-	-	0 ～ 67	-	-	-	5 ～ 100	-	4 ～ 23	20 ～ 50	20 ～ 25	-	-	-	-	10	1 stycken
32	32	[0.2 or Less] 0.15 or Less	2 x 1.5	300 ～ 2000	14600	38900	A (No Shaft End machining)	K (Double Stepped, Keyway machining)	5 ～ 69	Phosphate Coating	2 ～ 67	-	-	-	-	-	-	0 ～ 67	-	-	-	5 ～ 100	-	4 ～ 23	20 ～ 50	20 ～ 25	-	-	-	-	10	1 stycken
12	4	0.05 or Less	1 x 2.5	150 ～ 800	2600	5800	A (No Shaft End machining)	m (Double Stepped, Tapped Hole on the End)	5 ～ 24	Phosphate Coating	-	4 ～ 6	-	-	-	-	-	-	-	-	-	5 ～ 40	-	4 ～ 8	8 ～ 20	8 ～ 10	-	-	-	-	10	1 stycken
12	10	[0.10 or Less] 0.10 or Less	1 x 1.5	150 ～ 800	2850	4950	A (No Shaft End machining)	m (Double Stepped, Tapped Hole on the End)	5 ～ 24	Phosphate Coating	-	4 ～ 6	-	-	-	-	-	-	-	-	-	5 ～ 40	-	4 ～ 8	8 ～ 20	8 ～ 10	-	-	-	-	10	1 stycken

Enhetspris (exklusive MOMS)(Enhetspris inklusive MOMS)	Standardavsändningsdatum

- ( - )	9 arbetsdagar
- ( - )	9 arbetsdagar
- ( - )	9 arbetsdagar
- ( - )	9 arbetsdagar
- ( - )	9 arbetsdagar
- ( - )	9 arbetsdagar
- ( - )	9 arbetsdagar
- ( - )	9 arbetsdagar
- ( - )	9 arbetsdagar
- ( - )	9 arbetsdagar
- ( - )	9 arbetsdagar
- ( - )	9 arbetsdagar
- ( - )	9 arbetsdagar
- ( - )	9 arbetsdagar
- ( - )	9 arbetsdagar
- ( - )	9 arbetsdagar
- ( - )	9 arbetsdagar
- ( - )	9 arbetsdagar
- ( - )	9 arbetsdagar
- ( - )	9 arbetsdagar
- ( - )	9 arbetsdagar
- ( - )	9 arbetsdagar
- ( - )	9 arbetsdagar
- ( - )	9 arbetsdagar
- ( - )	9 arbetsdagar
- ( - )	9 arbetsdagar
- ( - )	9 arbetsdagar
- ( - )	9 arbetsdagar
- ( - )	9 arbetsdagar
- ( - )	9 arbetsdagar
- ( - )	9 arbetsdagar
- ( - )	9 arbetsdagar
- ( - )	9 arbetsdagar
- ( - )	9 arbetsdagar
- ( - )	9 arbetsdagar
- ( - )	9 arbetsdagar
- ( - )	9 arbetsdagar
- ( - )	9 arbetsdagar
- ( - )	9 arbetsdagar
- ( - )	9 arbetsdagar
- ( - )	9 arbetsdagar
- ( - )	9 arbetsdagar
- ( - )	9 arbetsdagar
- ( - )	9 arbetsdagar
- ( - )	9 arbetsdagar
- ( - )	9 arbetsdagar
- ( - )	9 arbetsdagar
- ( - )	9 arbetsdagar
- ( - )	9 arbetsdagar
- ( - )	9 arbetsdagar
- ( - )	9 arbetsdagar
- ( - )	9 arbetsdagar
- ( - )	9 arbetsdagar
- ( - )	9 arbetsdagar
- ( - )	9 arbetsdagar
- ( - )	9 arbetsdagar
- ( - )	9 arbetsdagar
- ( - )	9 arbetsdagar
- ( - )	9 arbetsdagar
- ( - )	9 arbetsdagar

...

Nästa

Grundläggande information

Teknisk information

Skiss och specifikationer

Back to the Category Ball Screws

Technical Drawing - Ball Screws

Open the technical drawing in the new window

Specification Table - Ball Screws

V	Tolerance
6	-0.002 -0.007
8	-0.002 -0.008
10	-0.002 -0.015
12, 15	-0.003 -0.018
20, 25	-0.004 -0.021

Accuracy Grade	Part Number					1mm Increment	1mm Increment									Selection				1mm Increment								Selection
	Type	Left End Support Side	Right End Fixed Side	Screw Shaft O.D.	Lead	L	F	P	S	U	C	KC	SC	X	Z	V			E (Coarse)	G	K	J	JC	H	Y	R	W	Q					N (Coarse)
C10	FBSSR FBSSZ	A B C D E F G H	A J K M N P R S	08	02	100~400	5≤F≤Px3 9≤S≤Vx4 V≤U≤Vx2 U≤S-Pitch x3 b1<C≤60 F-C-KC≥2 KC=0 or KC≥2 5≤SC≤Px3 SC≤F-2 5≤X≤20 P≥4 P≥V/2 When V=6, P=4 When V≥8, P≤V-2									6			4 5 6 8 10	5≤G≤Qx3 5≤K≤Qx3 3≤J≤20 H≥Q-2 5≤Y≤20 R≤Q-2								6					-
				08	04	100~380																						6
				10	02	150~585										8												6					-
				10	04	150~600																						6
				10	10	150~585																						6
				12	04	150~800										8	10											6	8				4
				12	10	150~800										8	10
				14	05	150~800										8	10											6	8	10			4	5	6
				15	05	150~1200										10	12											8	10	12			5	6	8
				15	10	200~1200
				15	20
				20	05	200~2000										10	12	15										8	10	12	15		5	6	8	10
				20	10	250~2000
				20	20
				25	05	200~2000										15	20											10	12	15	20		6	8	10
				25	10	300~2000
				25	25
				28	06	200~2000										15	20											10	12	15	20		6	8	10
				32	10	300~2000										20	25											10	12	15	20	25	6	8	10
				32	32
For FBSSZ type, sizes 0804, 1002 and 1010 are not available. E≤P-4 N≤Q-4

Alterations - Ball Screws

More Information

Caution: Do not let the nuts overrun or remove the nuts from the screw shafts.
It may cause the balls to fall out or damage the ball recirculation parts.
For accuracy of Rolled Ball Screws, see P.2223 and P.2224.
For Support Units, see P.753~P.778.
For Nut Brackets, see P.780.

General Information - Ball Screws

Ball screw drive - ball screw drive, nut stop - ball screw drive, nut damper - ball screw drive, block shape - ball screw drive, nut mount

Ball Screw Selection Details

- Material: steel

- Coatings: uncoated, LTBC coating, phosphate conversion coating

- Heat treatment: up to 62HRC

- Precision category: C3, C5, C7, C10

- Precision classes: precision class, standard class

- Slope: 1 to 32 mm

- Outer diameter: 6 to 32 mm

- Length (mm): 100 to 2000

- Nut shape: round flange, square flange, compact flange, block shape

Description/Basics

Ball screws are intended for converting rotary motion to linear motion. This can also be done in reverse order from linear to rotary motion. With the ball screws, this is achieved extremely precisely due to their low play. In mechanical engineering, the ball thread drive is an indispensable feature and is indispensable in precision applications. These work in horizontal and vertical orientation, allowing to shift, raise and lower devices.
The ball screws are often driven by motors and shaft couplings, or manually via rotary/crank handles.
When utilising a keyway, it is recommended using a machine key, as these can be combined excellently due to the manufacturing tolerances.
For a smooth process, it is recommended installing the ball screw with a fixed bearing and a floating bearing. This ensures that the ball screw does not bend due to compression and generate vibrations. For this purpose, MISUMI offers the right support units drives in various designs. For more information on how to install ball screws, see the Installation Instructions available as a PDF.
Ball screw nuts are available in different shapes. These enable versatile utilisation, even in confined spaces. Due to their high precision, the ball screws can also provide a high level of repeatability that is necessary in precise positioning applications. These can be utilised, for example, for measuring devices or in 3D printing. It is recommended to use a pre-stressed ball screw for highly precise applications. Due to the pre-tensioning, the axial play is almost zero unlike a conventional ball screw. In addition, MISUMI offers single axis actuators (locating units) for such applications, which as drives are already equipped with precise ball screws.
In smaller applications, a slide screw or a so-called miniature screw drive can be used. Due to their design, these are very compact, but suitable for lower axial loads.
If very high forces occur, a lead screw could also be considered.
Which ball screw is the right one for your application must be calculated based on the existing factors and influences. You can use the selection Ball Screws that is available as a PDF for this purpose. You can also find the service life calculation in this link.