Polyethylene Foam for Antistatic
Artikelnummer:
kandidater hittades.Skiss och specifikationstabell
Dimensional Drawing
(No Adhesive)
(Adhesive)
| No Adhesive | Adhesive | [M] Material |
| LBA | LBAA | Main Body: Conductive Polyethylene Foam |
| LBRA | LBRAA |
■ Accuracy Standards
LBA
LBAA
● T Dimension Tolerance
| T | 3 | 5 to 15 | 20·30 | 40 |
| ±0.3 | ±0.5 | ±0.8 | ±1.0 |
• Dimension Tolerance of A and B
±0.1 (However, A and B dimension tolerance of T40 is ±0.5)
LBRA
LBRAA
● T Dimension Tolerance
| T | 1 | 3 | 5·10 | 20 |
| ±0.2 | ±0.3 | ±0.5 | ±0.8 |
• Dimension Tolerance of A and B
±0.5 (However, A and B dimension tolerance of T20 is ±1.0)
■Conductive Sponge Characteristics
●LBA (LBAA)
LBA has high conductivity using special conductive carbon black, and it is made up of a closed cell structure. Carbon is completely compounded with polyethylene so that it neither crumble nor bonds, and can be extensively used for wrapping materials of various IC products.
●LBRA (LBRAA)
LBRA is more flexible than LBA and suited for use as wrapping or cushioning material for products that require static protection. The foaming agent is nitrogen gas and will not contaminate precision measuring equipment.
* Adhesives are not conductive.
●LBA (LBAA)
LBA has high conductivity using special conductive carbon black, and it is made up of a closed cell structure. Carbon is completely compounded with polyethylene so that it neither crumble nor bonds, and can be extensively used for wrapping materials of various IC products.
●LBRA (LBRAA)
LBRA is more flexible than LBA and suited for use as wrapping or cushioning material for products that require static protection. The foaming agent is nitrogen gas and will not contaminate precision measuring equipment.
* Adhesives are not conductive.
Specification Table
| Part Number | — | A | — | B | — | T |
| LBA | — | 200 | — | 100 | — | 5 |
| Part Number | 10 mm Increments | Selection T | ||
| A | B | LBA·LBAA | LBRA·LBRAA | |
| No Adhesive LBA LBRA Adhesive LBAA LBRAA | 20 to 800 A500 or Less for the Adhesive Type | 20 to 500 | 3 5 10 15 20 30 40 | 1 3 5 10 20 |
[ ! ] Only T20 or less for Adhesive Type
| Measurement Item | Testing Method | Unit | LBA (A) | LBRA (A) | LBNU (A) | LBNC (A) | |
| Specific Volume Resistivity | SRIS 2301 | Ω·cm | 1.0 × 104or Less | 1.0 × 104or Less | 5 × 105 | 4 × 104 | |
| Surface Resistivity | ASTM D 257 | Ω | 1.0 × 104or Less | 3.0 × 104or Less | 1 × 106 | 9 × 104 | |
| Density | JIS K 6767 | g/cm3 | 0.068 | 0.050 | 0.08 | 0.19 | |
| Hardness | SRIS 0101 | Asker C | 45 | 45 | < 5 | 15 | |
| Tensile Strength | JIS K 6767 | kg/cm2 | 8.0 | 3.7 | 1.4 | 5.0 | |
| Elongation | JIS K 6767 | % | 63 | 66 | 150 | 150 | |
| Tear Strength | JIS K 6767 | kg/cm | 3.0 | 1.6 | 0.6 | 5.2 | |
| Compression Strength | (25%) | JIS K 6767 | kg/cm2 | 2.0 | 0.8 | 0.1 | 0.8 |
| (10%) | JIS K 9514 | kg/cm2 | 1.6 | 0.6 | 0.1 | 0.7 | |
| Compression Set (25%) | JIS K 6767 | % | 2.8 | 2.4 | 2 | 20 | |
| Dimension Change under Heat | JIS K 6767 | % | −0.8 | −0.6 | −2.0 | −2.0 | |
Artikelnummerlista
Antal artiklar
| Artikelnummer |
|---|
Enhetspris (exklusive MOMS)(Enhetspris inklusive MOMS) | Standardavsändningsdatum |
|---|
- ( - ) | 7 arbetsdagar |
- ( - ) | 7 arbetsdagar |
- ( - ) | 7 arbetsdagar |
- ( - ) | 7 arbetsdagar |
