Filtreringsvillkor
- Shaft Dia. D1(Ø)
- 20
- 30
- Brush Dia. D(mm)
- D(mm)
- 50
- 60
- 70
- 80
- 100
- 120
- L(mm)
- 100
- 150
- 250
- 350
- L1(mm)[20-320/5mm units]
- Type
- CAD
- 2D
- 3D
- Uppskattade leveransdagar
- Alla
- Inom 11 arbetsdagar
Roll Brush
Artikelnummer:
kandidater hittades.Skiss och specifikationstabell
Dimensional Drawing
I.D. Tolerance (Bushing)
| L | V |
| 100 | H9 |
| 150 | |
| 250 | |
| 350 | +0.1/0 |
| Type | [M]Brush Filament | [M]Pipe, Bushing Connecting Part |
| BRUSNR | Nylon 6 | EN 1.4301 Equiv. |
[ ! ]Sample rental service is not available.
Specification Table
| Part Number | — | D | — | L | — | L1 |
| BRUSNR20 | — | 80 | — | 150 | — | 100 |
■Tight Rolled
[ ! ] Set screws are not included.
| Part Number | D Selection | L Selection | L1 5 mm Increments | V | h | d Brush Wire Dia. | H | M | Proper Motor Power (Unit: kW) [ ! ] Reference Values | Critical Temperature (Reference Value) | |
| Type | D1 | ||||||||||
| BRUSNR | 20 | 50 | 100 150 250 350 | 20 to 320 [ ! ]L1 ≤ L−30 | 12 | 3.5 | 0.21 | 11.5 | 4 | 0.4 | 100°C |
| 60 | 16.5 | ||||||||||
| 80 | 26.5 | 0.75 | |||||||||
| 100 | 36.5 | ||||||||||
| 30 | 70 | 20 | 5.5 | 0.295 | 14.5 | 5 | 0.4 | ||||
| 80 | 19.5 | ||||||||||
| 100 | 29.5 | 0.75 | |||||||||
| 120 | 39.5 | 1.25 | |||||||||
Alterations
| Alterations Code | Brush Trimming | Applicable conditions | Ordering example | ||||||
| DC | Changes brush O.D. [Ordering Code]: DC85 5 mm Increments
| [ ! ]DC < D | BRUSNR20-80-150-100-DC75 |
Artikelnummerlista
Antal artiklar
| Artikelnummer |
|---|
Enhetspris (exklusive MOMS)(Enhetspris inklusive MOMS) | Standardavsändningsdatum |
|---|
- ( - ) | 11 arbetsdagar |
- ( - ) | 11 arbetsdagar |
Detaljerad information
Grundläggande information
Försiktighet
- Please check the content on our website as the PDF does not contain the most up-to-date information.
Skiss och specifikationer
App. Example
