Filtreringsvillkor
- Material
- Steel
- EN 1.1191 Equiv.
- EN 1.7220 Equiv.
- Stainless Steel
- EN 1.4301 Equiv.
- Hardness
- Surface Treatment
- NA
- Surface Treatment Provided
- Black Oxide
- Electroless Nickel Plating
- D Tolerance
- Shaft Dia. D(mm)
- 6
- 8
- 10
- 12
- 13
- 15
- 16
- 17
- 18
- 20
- 22
- 25
- 30
- 35
- 40
- 50
- Length L(mm)[15-998/0.1mm units]
- F(mm)[2-245/0.1mm units]
- N(mm)
- 2.6
- 3
- 4
- 5
- 6
- 8
- 10
- 12
- 16
- 20
- 24
- 30
- ND
- 3
- 4
- 5
- 6
- 8
- 10
- 12
- 16
- 20
- P(mm)[3-49/1mm units]
- Wrench Flats Machining [SC](mm)[0-988/1mm units]
- CAD
- 2D
- 3D
- Uppskattade leveransdagar
- Alla
- Inom 4 arbetsdagar
- Inom 5 arbetsdagar
- Inom 6 arbetsdagar
- Inom 9 arbetsdagar
Rotary axes / offset on one side with internal thread / machining selectable(Artikelnummerlista: 2-sida)
Artikelnummer:
kandidater hittades.Skiss och specifikationstabell
| Type | Tolerance | Material | Surface Treatment | |||
| Standard | Wrench Flats | D | P | |||
| SFRMHF | SFRMHFS | h9 (Cold-drawn) | h7 | EN 1.1191 Equiv. | Black Oxide | |
| PSFRMHF | PSFRMHFS | Electroless Nickel Plating | ||||
| SSFRMHF | SSFRMHFS | EN 1.4301 Equiv. | - | |||
| SFRMGF | SFRMGFS | g6 | EN 1.1191 Equiv. | Black Oxide | ||
| PSFRMGF | PSFRMGFS | Electroless Nickel Plating | ||||
| SSFRMGF | SSFRMGFS | EN 1.4301 Equiv. | - | |||
| SFRHF | SFRHFS | h7 (Ground) | h7 | EN 1.1191 Equiv. | Black Oxide | |
| PSFRHF | PSFRHFS | Electroless Nickel Plating | ||||
| SSFRHF | SSFRHFS | EN 1.4301 Equiv. | - | |||
| SFRF | SFRFS | g6 (Ground) | g6 | EN 1.1191 Equiv. | Black Oxide | |
| PSFRF | PSFRFS | Electroless Nickel Plating | ||||
| SSFRF | SSFRFS | EN 1.4301 Equiv. | - | |||
| PHFRF | - | EN 1.7220 Equiv. Hardness: 30 ~ 35HRC | Electroless Nickel Plating | |||
Specifications
| Part Number | - | L | - | F | - | P | - | N | - | SC | |
| D part h9 / P part h7 h7 (Ground) with Wrench Flat | PSFRMHF30 SFRHFS25 | - - | 250 200 | - - | F30 F25 | - - | P10 P15 | - - | N10 N12 | - | SC30 |
D tolerance h9 (Cold-drawn) / P tolerance h7 D tolerance h9 (Cold-drawn) / P tolerance g6
h7 (Ground)
g6 (Ground)
When D-P≤2, chamfer C at the step is 0.2 or less. Overall length requires Nx3≤L.
| Part Number | 0.1mm Increment | 1mm Increment | N (Coarse) Selection | 1mm Increment | W | ℓ2 | (Y)max. | |||||||||||||
| Type | D | L | F | P | SC Wrench Flats Type only | |||||||||||||||
| Standard | Wrench Flats | |||||||||||||||||||
| D part h9 / P part h7 SFRMHF PSFRMHF SSFRMHF (D6 is not available for SSFRMHF.) D part h9 / P part g6 SFRMGF PSFRMGF SSFRMGF (D6 is not available for SSFRMGF.) | D part h9 / P part h7 SFRMHFS PSFRMHFS SSFRMHFS (D6 is not available for SSFRMHFS.) D part h9 / P part g6 SFRMGFS PSFRMGFS SSFRMGFS (D6 is not available for SSFRMGFS.) | 6 | 20.0~298.0 | 2≤F≤Px5 | 3≤P | 3 | 4 | SC+ℓ2≤L SC=0 or SC≥1 For SC≤Mx3 W-M≥2 | 5 | 8 | 300 | |||||||||
| 8 | 20.0~398.0 | 3 | 4 | 5 | 6 | 7 | 400 | |||||||||||||
| 10 | 20.0~498.0 | 4 | 5 | 6 | 8 | 500 | ||||||||||||||
| 12 | 30.0~598.0 | 5≤P | 5 | 6 | 8 | 10 | 10 | 600 | ||||||||||||
| 15 | 30.0~698.0 | 5 | 6 | 8 | 10 | 13 | 700 | |||||||||||||
| 20 | 40.0~798.0 | 5 | 6 | 8 | 10 | 12 | 16 | 17 | 800 | |||||||||||
| 25 | 50.0~798.0 | 10≤P | 5 | 6 | 8 | 10 | 12 | 16 | 22 | |||||||||||
| 30 | 60.0~798.0 | 8 | 10 | 12 | 16 | 20 | 27 | 15 | ||||||||||||
| 35 | 70.0~798.0 | 16≤P | 8 | 10 | 12 | 16 | 20 | 24 | 30 | |||||||||||
| Part Number | 0.1mm Increment | 1mm Increment | N (Coarse) Selection | 1mm Increment | W | ℓ2 | (Y)max. | |||||||||||||
| Type | D | L | F | P | SC Wrench Flats Type only | |||||||||||||||
| Standard | Wrench Flats | |||||||||||||||||||
| SFRHF PSFRHF SSFRHF | SFRHFS PSFRHFS SSFRHFS | 6 | 20.0~298.0 | 2≤F≤Px5 | 3≤P | 3 | 4 | SC+ℓ2≤L SC=0 or SC≥1 For SC≤Mx3 W-M≥2 | 5 | 8 | 300 | |||||||||
| 8 | 20.0~398.0 | 3 | 4 | 5 | 6 | 7 | 400 | |||||||||||||
| 10 | 20.0~498.0 | 4 | 5 | 6 | 8 | 500 | ||||||||||||||
| 12 | 30.0~598.0 | 5≤P | 5 | 6 | 8 | 10 | 10 | 600 | ||||||||||||
| 15 | 30.0~698.0 | 5 | 6 | 8 | 10 | 13 | 700 | |||||||||||||
| 17 | 40.0~798.0 | 5 | 6 | 8 | 10 | 12 | 14 | 800 | ||||||||||||
| 20 | 40.0~798.0 | 5 | 6 | 8 | 10 | 12 | 16 | 17 | ||||||||||||
| 25 | 50.0~798.0 | 10≤P | 5 | 6 | 8 | 10 | 12 | 16 | 22 | |||||||||||
| 30 | 60.0~798.0 | 8 | 10 | 12 | 16 | 20 | 27 | 15 | ||||||||||||
| 35 | 70.0~798.0 | 16≤P | 8 | 10 | 12 | 16 | 20 | 24 | 30 | |||||||||||
| 40 | 80.0~798.0 | 12 | 16 | 20 | 24 | 30 | 36 | 20 | ||||||||||||
| 50 | 100.0~798.0 | 16 | 20 | 24 | 30 | 41 | ||||||||||||||
| Part Number | 0.1mm Increment | 1mm Increment | N (Coarse) Selection | 1mm Increment | W | ℓ2 | (Y)max. | ||||||||||||||
| Type | D | L | F | P | SC Wrench Flats Type only | ||||||||||||||||
| Standard | Wrench Flats | ||||||||||||||||||||
| SFRF PSFRF SSFRF (D13, 16, 18 and 22 are not available for SSFRF.) *PHFRF (Only * marked sizes are available.) | SFRFS PSFRFS SSFRFS (D13, 16, 18 and 22 are not available for SSFRFS.) | 6 | 20.0~298.0 | 2≤F≤Px5 | 3≤P | 3 | 4 | SC+ℓ2≤L SC=0 or SC≥1 For SC≤Mx3 W-M≥2 | 5 | 8 | 300 | ||||||||||
| 8 | 20.0~398.0 | 3 | 4 | 5 | 6 | 7 | 400 | ||||||||||||||
| 10 | 20.0~498.0 | 4 | 5 | 6 | 8 | 500 | |||||||||||||||
| 12 | 30.0~598.0 | 5≤P | 5 | 6 | 8 | 10 | 10 | 600 | |||||||||||||
| 13 | 30.0~598.0 | 5 | 6 | 8 | 11 | ||||||||||||||||
| * | 15 | 30.0~698.0 | 5 | 6 | 8 | 10 | 13 | 700 | |||||||||||||
| 16 | 40.0~798.0 | 5 | 6 | 8 | 10 | 14 | 800 | ||||||||||||||
| 17 | 40.0~798.0 | 5 | 6 | 8 | 10 | 12 | |||||||||||||||
| 18 | 40.0~798.0 | 5 | 6 | 8 | 10 | 12 | 15 | ||||||||||||||
| * | 20 | 40.0~798.0 | 5 | 6 | 8 | 10 | 12 | 16 | 17 | ||||||||||||
| 22 | 40.0~798.0 | 10≤P | 5 | 6 | 8 | 10 | 12 | 16 | 19 | ||||||||||||
| * | 25 | 50.0~798.0 | 5 | 6 | 8 | 10 | 12 | 16 | 22 | ||||||||||||
| * | 30 | 60.0~798.0 | 8 | 10 | 12 | 16 | 20 | 27 | 15 | ||||||||||||
| * | 35 | 70.0~798.0 | 16≤P | 8 | 10 | 12 | 16 | 20 | 24 | 30 | |||||||||||
| * | 40 | 80.0~798.0 | 12 | 16 | 20 | 24 | 30 | 36 | 20 | ||||||||||||
| * | 50 | 100.0~798.0 | 16 | 20 | 24 | 30 | 41 | ||||||||||||||
Alterations
Artikelnummerlista
| Artikelnummer |
|---|
Enhetspris (exklusive MOMS)(Enhetspris inklusive MOMS) | Standardavsändningsdatum |
|---|
- ( - ) | 9 arbetsdagar |
- ( - ) | 9 arbetsdagar |
- ( - ) | 6 arbetsdagar |
- ( - ) | 6 arbetsdagar |
- ( - ) | 9 arbetsdagar |
- ( - ) | 9 arbetsdagar |
- ( - ) | 6 arbetsdagar |
- ( - ) | 6 arbetsdagar |
- ( - ) | 9 arbetsdagar |
- ( - ) | 9 arbetsdagar |
- ( - ) | 9 arbetsdagar |
- ( - ) | 9 arbetsdagar |
- ( - ) | 9 arbetsdagar |
- ( - ) | 9 arbetsdagar |
- ( - ) | 9 arbetsdagar |
- ( - ) | 9 arbetsdagar |
- ( - ) | 9 arbetsdagar |
- ( - ) | 9 arbetsdagar |
- ( - ) | 9 arbetsdagar |
- ( - ) | 9 arbetsdagar |
- ( - ) | 9 arbetsdagar |
- ( - ) | 9 arbetsdagar |
- ( - ) | 9 arbetsdagar |
- ( - ) | 9 arbetsdagar |
- ( - ) | 9 arbetsdagar |
- ( - ) | 9 arbetsdagar |
- ( - ) | 9 arbetsdagar |
- ( - ) | 9 arbetsdagar |
- ( - ) | 9 arbetsdagar |
- ( - ) | 9 arbetsdagar |
- ( - ) | 9 arbetsdagar |
- ( - ) | 9 arbetsdagar |
- ( - ) | 9 arbetsdagar |
- ( - ) | 9 arbetsdagar |
- ( - ) | 9 arbetsdagar |
- ( - ) | 9 arbetsdagar |
- ( - ) | 9 arbetsdagar |
- ( - ) | 9 arbetsdagar |
- ( - ) | 9 arbetsdagar |
- ( - ) | 9 arbetsdagar |
- ( - ) | 9 arbetsdagar |
- ( - ) | 9 arbetsdagar |
- ( - ) | 6 arbetsdagar |
- ( - ) | 6 arbetsdagar |
- ( - ) | 6 arbetsdagar |
- ( - ) | 6 arbetsdagar |
- ( - ) | 6 arbetsdagar |
- ( - ) | 6 arbetsdagar |
- ( - ) | 6 arbetsdagar |
- ( - ) | 6 arbetsdagar |
- ( - ) | 6 arbetsdagar |
- ( - ) | 6 arbetsdagar |
- ( - ) | 6 arbetsdagar |
- ( - ) | 6 arbetsdagar |
- ( - ) | 6 arbetsdagar |
- ( - ) | 6 arbetsdagar |
- ( - ) | 6 arbetsdagar |
- ( - ) | 6 arbetsdagar |
- ( - ) | 6 arbetsdagar |
- ( - ) | 6 arbetsdagar |
Detaljerad information
Grundläggande information
Skiss och specifikationer
Example of Use
