Rotational axes / offset on one side external thread, internal thread / machining selectable

Click on this image to zoom in.

Order quantities extended (D-JIT)

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Drawing / Specifications
3D Preview 3D preview is available after complete configuration
Part Numbers
More Information
Catalog
Technical Information

Rotary Shafts/One End Stepped and Threaded/One End Tapped:Related Image

Type			Tolerance		Material	Surface Treatment
	Standard	Wrench Flats	D	P	Material	Surface Treatment
	SFRMHD	SFRMHDS	h9 (Cold-drawn)	h7	EN 1.1191 Equiv.	Black Oxide
	PSFRMHD	PSFRMHDS			EN 1.1191 Equiv.	Electroless Nickel Plating
	SSFRMHD	SSFRMHDS			EN 1.4301 Equiv.	-
	SFRMGD	SFRMGDS		g6	EN 1.1191 Equiv.	Black Oxide
	PSFRMGD	PSFRMGDS			EN 1.1191 Equiv.	Electroless Nickel Plating
	SSFRMGD	SSFRMGDS			EN 1.4301 Equiv.	-
	SFRHD	SFRHDS	h7 (Ground)	h7	EN 1.1191 Equiv.	Black Oxide
	PSFRHD	PSFRHDS			EN 1.1191 Equiv.	Electroless Nickel Plating
	SSFRHD	SSFRHDS			EN 1.4301 Equiv.	-
	SFRD	SFRDS	g6 (Ground)	g6	EN 1.1191 Equiv.	Black Oxide
	PSFRD	PSFRDS			EN 1.1191 Equiv.	Electroless Nickel Plating
	SSFRD	SSFRDS			EN 1.4301 Equiv.	-

Specifications

	Part Number	-	L	-	F	-	B	-	P	-	N	-	SC
D part h9 / P part h7 h7 (Ground)	SFRMHD30 SFRHDS25	- -	250 200	- -	F30 F25	- -	B8 B15	- -	P10 P12	- -	N8 N12	-	SC30

D tolerance h9 (Cold-drawn) / P tolerance h7 D tolerance h9 (Cold-drawn) / P tolerance g6

Part Number			0.1mm Increment		1mm Increment	P Selection											N (Coarse) Selection										1mm Increment	W	ℓ₂	(Y)max.
Type		D	L	F	B																						SC Wrench Flats Type only
Standard	Wrench Flats	D	L	F	B																						SC Wrench Flats Type only
D part h9 / P part h7 SFRMHD PSFRMHD SSFRMHD (D6 is not available for SSFRMHD.) D part h9 / P part g6 SFRMGD PSFRMGD SSFRMGD (D6 is not available for SSFRMGD.)	D part h9 / P part h7 SFRMHDS PSFRMHDS SSFRMHDS (D6 is not available for SSFRMHDS.) D part h9 / P part g6 SFRMGDS PSFRMGDS SSFRMGDS (D6 is not available for SSFRMGDS.)	6	20.0~295.0	5≤F≤Px7	When P≤6 B≤Px3 & B≤F-2 When P=8 or 10 B≤Px3 & B≤F-3 When P≥12 B≤Px3 & B≤F-5	3	4	5									3	4									SC+ℓ₂≤L SC=0 or SC≥1 For SC≤Mx3 W-M≥2	5	8	300
		8	20.0~395.0			3	4	5	6								3	4	5	6								7		400
		10	20.0~495.0				4	5	6	8								4	5	6								8		500
		12	30.0~595.0					5	6	8	10								5	6	8							10	10	600
		15	30.0~695.0					5	6	8	10	12							5	6	8	10						13		700
		20	40.0~795.0					5	6	8	10	12	16						5	6	8	10	12	16				17		800
		25	50.0~795.0					5	6	8	10	12	16	20					5	6	8	10	12	16				22
		30	60.0~795.0							8	10	12	16	20	24						8	10	12	16	20			27	15
		35	70.0~795.0							8	10	12	16	20	24	30							12	16	20	24		30	15

h7 (Ground)

Part Number			0.1mm Increment		1mm Increment	P Selection											N (Coarse) Selection											1mm Increment	W	ℓ₂	(Y)max.
Type		D	L	F	B																							SC Wrench Flats Type only
Standard	Wrench Flats	D	L	F	B																							SC Wrench Flats Type only
SFRHD PSFRHD SSFRHD	SFRHDS PSFRHDS SSFRHDS	6	20.0~295.0	5≤F≤Px7	When P≤6 B≤Px3 & B≤F-2 When P=8 or 10 B≤Px3 & B≤F-3 When P≥12 B≤Px3 & B≤F-5	3	4	5									3	4										SC+ℓ₂≤L SC=0 or SC≥1 For SC≤Mx3 W-M≥2	5	8	300
		8	20.0~395.0			3	4	5	6								3	4	5	6									7		400
		10	20.0~495.0				4	5	6	8								4	5	6									8		500
		12	30.0~595.0					5	6	8	10								5	6	8								10	10	600
		15	30.0~695.0					5	6	8	10	12							5	6	8	10							13		700
		17	40.0~795.0					5	6	8	10	12							5	6	8	10	12						14		800
		20	40.0~795.0					5	6	8	10	12	16						5	6	8	10	12	16					17
		25	50.0~795.0					5	6	8	10	12	16	20					5	6	8	10	12	16					22
		30	60.0~795.0							8	10	12	16	20	24						8	10	12	16	20				27	15
		35	70.0~795.0							8	10	12	16	20	24	30							12	16	20	24			30	15
		40	80.0~795.0									12	16	20	24	30							12	16	20	24	30		36	20
		50	100.0~795.0										16	20	24	30								16	20	24	30		41	20

g6 (Ground)

Part Number			0.1mm Increment		1mm Increment	P Selection											N (Coarse) Selection											1mm Increment	W	ℓ₂	(Y)max.
Type		D	L	F	B																							SC Wrench Flats Type only
Standard	Wrench Flats	D	L	F	B																							SC Wrench Flats Type only
SFRD PSFRD SSFRD (D13, 16, 18 and 22 are not available for SSFRD.)	SFRDS PSFRDS SSFRDS (D13, 16, 18 and 22 are not available for SSFRDS.)	6	20.0~295.0	5≤F≤Px7	When P≤6 B≤Px3 & B≤F-2 When P=8 or 10 B≤Px3 & B≤F-3 When P≥12 B≤Px3 & B≤F-5	3	4	5									3	4										SC+ℓ₂≤L SC=0 or SC≥1 For L-SC≤Nx3, W-N≥2	5	8	300
		8	20.0~395.0			3	4	5	6								3	4	5	6									7		400
		10	20.0~495.0				4	5	6									4	5	6									8		500
		12	30.0~595.0					5	6	8									5	6	8								10	10	600
		13	25.0~595.0					5	6	8									5	6	8								11		600
		15	30.0~695.0					5	6	8	10								5	6	8	10							13		700
		16	25.0~795.0					5	6	8	10								5	6	8	10							14		800
		17	40.0~795.0					5	6	8	10	12							5	6	8	10	12						14
		18	30.0~795.0					5	6	8	10	12							5	6	8	10	12						15
		20	40.0~795.0					5	6	8	10	12	16						5	6	8	10	12	16					17
		22	30.0~795.0					5	6	8	10	12	16						5	6	8	10	12	16					19
		25	50.0~795.0					5	6	8	10	12	16						5	6	8	10	12	16					22
		30	60.0~795.0							8	10	12	16	20							8	10	12	16	20				27	15
		35	70.0~795.0							8	10	12	16	20	24						8	10	12	16	20	24			30	15
		40	80.0~795.0									12	16	20	24	30							12	16	20	24	30		36	20
		50	100.0~795.0										16	20	24	30								16	20	24	30		41	20

When D-P≤2, chamfer C at the step is 0.2 or less. Overall length requires Nx3≤L.

Alterations

Part Number:

3D preview is not available, because the part number has not yet been determined.

In order to open the 3D preview, the part number must be fixed.

Plug-in is required for 3D Preview

CAD Download

Data to be displayed: 30; 45; 60

1
2
3
4
5
Next >>

Part Number
PSFRD6-[15-395/0.1]-F[2-35/0.1]-B[2-15/1]-P[3,4,5]-N[2.6,3,4]
PSFRD6-[15-395/0.1]-F[2-35/0.1]-B[2-15/1]-P[3,4,5]-ND[3,4]
PSFRD6-[15-395/0.1]-F[2-35/0.1]-B[2-15/1]-PMC[3,4,5]-N[2.6,3,4]
PSFRD6-[15-395/0.1]-F[2-35/0.1]-B[2-15/1]-PMC[3,4,5]-ND[3,4]
PSFRD8-[15-495/0.1]-F[2-42/0.1]-B[2-18/1]-P[3,4,5,6]-N[2.6,3,4,5,6]
PSFRD8-[15-495/0.1]-F[2-42/0.1]-B[2-18/1]-P[3,4,5,6]-ND[3,4,5,6]
PSFRD8-[15-495/0.1]-F[2-42/0.1]-B[2-18/1]-PMC[3,4,5,6]-N[2.6,3,4,5,6]
PSFRD8-[15-495/0.1]-F[2-42/0.1]-B[2-18/1]-PMC[3,4,5,6]-ND[3,4,5,6]
PSFRD10-[15-595/0.1]-F[2-56/0.1]-B[2-24/1]-P[4,5,6,8]-N[3,4,5,6]
PSFRD10-[15-595/0.1]-F[2-56/0.1]-B[2-24/1]-P[4,5,6,8]-ND[3,4,5,6]
PSFRD10-[15-595/0.1]-F[2-56/0.1]-B[2-24/1]-PMC[4,5,6,8]-N[3,4,5,6]
PSFRD10-[15-595/0.1]-F[2-56/0.1]-B[2-24/1]-PMC[4,5,6,8]-ND[3,4,5,6]
PSFRD12-[15-695/0.1]-F[2-70/0.1]-B[2-35/1]-P[5,6,8,10]-N[4,5,6,8]
PSFRD12-[15-695/0.1]-F[2-70/0.1]-B[2-35/1]-P[5,6,8,10]-ND[4,5,6,8]
PSFRD12-[15-695/0.1]-F[2-70/0.1]-B[2-35/1]-PMC[5,6,8,10]-N[4,5,6,8]
PSFRD12-[15-695/0.1]-F[2-70/0.1]-B[2-35/1]-PMC[5,6,8,10]-ND[4,5,6,8]
PSFRD13-[15-895/0.1]-F[2-70/0.1]-B[0-65/1]-P[4,5,6,8,10]-N[3,4,5,6,8]
PSFRD13-[15-895/0.1]-F[2-70/0.1]-B[0-65/1]-P[4,5,6,8,10]-ND[3,4,5,6,8]
PSFRD13-[15-895/0.1]-F[2-70/0.1]-B[0-65/1]-PMC[5,6,8,10]-N[3,4,5,6,8]
PSFRD13-[15-895/0.1]-F[2-70/0.1]-B[0-65/1]-PMC[5,6,8,10]-ND[3,4,5,6,8]
PSFRD15-[15-795/0.1]-F[2-84/0.1]-B[2-40/1]-P[5,6,8,10,12]-N[4,5,6,8,10]
PSFRD15-[15-795/0.1]-F[2-84/0.1]-B[2-40/1]-P[5,6,8,10,12]-ND[4,5,6,8,10]
PSFRD15-[15-795/0.1]-F[2-84/0.1]-B[2-40/1]-PMC[5,6,8,10,12]-N[4,5,6,8,10]
PSFRD15-[15-795/0.1]-F[2-84/0.1]-B[2-40/1]-PMC[5,6,8,10,12]-ND[4,5,6,8,10]
PSFRD16-[15-995/0.1]-F[2-84/0.1]-B[0-42/1]-P[4,5,6,8,10,12]-N[4,5,6,8,10,12]
PSFRD16-[15-995/0.1]-F[2-84/0.1]-B[0-42/1]-P[4,5,6,8,10,12]-ND[4,5,6,8,10,12]
PSFRD16-[15-995/0.1]-F[2-84/0.1]-B[0-42/1]-PMC[5,6,8,10,12]-N[4,5,6,8,10,12]
PSFRD16-[15-995/0.1]-F[2-84/0.1]-B[0-42/1]-PMC[5,6,8,10,12]-ND[4,5,6,8,10,12]
PSFRD17-[30-895/0.1]-F[2-84/0.1]-B[2-36/1]-P[5,6,8,10,12]-N[4,5,6,8,10,12]
PSFRD17-[30-895/0.1]-F[2-84/0.1]-B[2-36/1]-P[5,6,8,10,12]-ND[4,5,6,8,10,12]
PSFRD17-[30-895/0.1]-F[2-84/0.1]-B[2-36/1]-PMC[6,8,10,12,15]-N[4,5,6,8,10,12]
PSFRD17-[30-895/0.1]-F[2-84/0.1]-B[2-36/1]-PMC[6,8,10,12,15]-ND[4,5,6,8,10,12]
PSFRD18-[24-995/0.1]-F[2-84/0.1]-B[0-36/1]-P[5,6,8,10,12,16]-N[4,5,6,8,10,12]
PSFRD18-[24-995/0.1]-F[2-84/0.1]-B[0-36/1]-P[5,6,8,10,12,16]-ND[4,5,6,8,10,12]
PSFRD18-[24-995/0.1]-F[2-84/0.1]-B[0-36/1]-PMC[6,8,10,12,15]-N[4,5,6,8,10,12]
PSFRD18-[24-995/0.1]-F[2-84/0.1]-B[0-36/1]-PMC[6,8,10,12,15]-ND[4,5,6,8,10,12]
PSFRD20-[30-995/0.1]-F[2-112/0.1]-B[2-49/1]-P[5,6,8,10,12,16]-N[4,5,6,8,10,12,16]
PSFRD20-[30-995/0.1]-F[2-112/0.1]-B[2-49/1]-P[5,6,8,10,12,16]-ND[4,5,6,8,10,12,16]
PSFRD20-[30-995/0.1]-F[2-112/0.1]-B[2-49/1]-PMC[6,8,10,12,15,17]-N[4,5,6,8,10,12,16]
PSFRD20-[30-995/0.1]-F[2-112/0.1]-B[2-49/1]-PMC[6,8,10,12,15,17]-ND[4,5,6,8,10,12,16]
PSFRD22-[24-995/0.1]-F[2-112/0.1]-B[0-57/1]-P[5,6,8,10,12,16,20]-N[4,5,6,8,10,12,16]
PSFRD22-[24-995/0.1]-F[2-112/0.1]-B[0-57/1]-P[5,6,8,10,12,16,20]-ND[4,5,6,8,10,12,16]
PSFRD22-[24-995/0.1]-F[2-112/0.1]-B[0-57/1]-PMC[6,8,10,12,15,17]-N[4,5,6,8,10,12,16]
PSFRD22-[24-995/0.1]-F[2-112/0.1]-B[0-57/1]-PMC[6,8,10,12,15,17]-ND[4,5,6,8,10,12,16]
PSFRD25-[50-995/0.1]-F[3-140/0.1]-B[2-60/1]-P[6,8,10,12,16,20]-N[4,5,6,8,10,12,16]
PSFRD25-[50-995/0.1]-F[3-140/0.1]-B[2-60/1]-P[6,8,10,12,16,20]-ND[4,5,6,8,10,12,16]
PSFRD25-[50-995/0.1]-F[3-140/0.1]-B[2-60/1]-PMC[8,10,12,15,17,20]-N[4,5,6,8,10,12,16]
PSFRD25-[50-995/0.1]-F[3-140/0.1]-B[2-60/1]-PMC[8,10,12,15,17,20]-ND[4,5,6,8,10,12,16]
PSFRD30-[60-995/0.1]-F[3-168/0.1]-B[2-95/1]-P[8,10,12,16,20,24]-N[6,8,10,12,16,20]
PSFRD30-[60-995/0.1]-F[3-168/0.1]-B[2-95/1]-P[8,10,12,16,20,24]-ND[6,8,10,12,16,20]
PSFRD30-[60-995/0.1]-F[3-168/0.1]-B[2-95/1]-PMC[8,10,12,15,17,20,25]-N[6,8,10,12,16,20]
PSFRD30-[60-995/0.1]-F[3-168/0.1]-B[2-95/1]-PMC[8,10,12,15,17,20,25]-ND[6,8,10,12,16,20]
PSFRD35-[70-995/0.1]-F[3-210/0.1]-B[2-90/1]-P[10,12,16,20,24,30]-N[6,8,10,12,16,20,24]
PSFRD35-[70-995/0.1]-F[3-210/0.1]-B[2-90/1]-P[10,12,16,20,24,30]-ND[6,8,10,12,16,20]
PSFRD35-[70-995/0.1]-F[3-210/0.1]-B[2-90/1]-PMC[10,12,15,17,20,25,30]-N[6,8,10,12,16,20,24]
PSFRD35-[70-995/0.1]-F[3-210/0.1]-B[2-90/1]-PMC[10,12,15,17,20,25,30]-ND[6,8,10,12,16,20]
PSFRD40-[80-995/0.1]-F[5-210/0.1]-B[2-90/1]-P[12,16,20,24,30]-N[10,12,16,20,24,30]
PSFRD40-[80-995/0.1]-F[5-210/0.1]-B[2-90/1]-P[12,16,20,24,30]-ND[10,12,16,20]
PSFRD40-[80-995/0.1]-F[5-210/0.1]-B[2-90/1]-PMC[12,15,17,20,25,30,35]-N[10,12,16,20,24,30]
PSFRD40-[80-995/0.1]-F[5-210/0.1]-B[2-90/1]-PMC[12,15,17,20,25,30,35]-ND[10,12,16,20]

Standard Unit Price	Minimum order quantity	Standard Shipping Days ?	RoHS	Material	Surface Treatment	D Tolerance	Shaft Dia. D (mm)	Length L (mm)	B (mm)	Change to Fine Threads [PMC] (mm)	F (mm)	N (mm)	ND	P (mm)	Wrench Flats Machining [SC] (mm)
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	6	15 ～ 395	2 ～ 15	-	2 ～ 35	2.6 ～ 4	-	3 ～ 5	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	6	15 ～ 395	2 ～ 15	-	2 ～ 35	-	3 ～ 4	3 ～ 5	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	6	15 ～ 395	2 ～ 15	3 ～ 5	2 ～ 35	2.6 ～ 4	-	-	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	6	15 ～ 395	2 ～ 15	3 ～ 5	2 ～ 35	-	3 ～ 4	-	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	8	15 ～ 495	2 ～ 18	-	2 ～ 42	2.6 ～ 6	-	3 ～ 6	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	8	15 ～ 495	2 ～ 18	-	2 ～ 42	-	3 ～ 6	3 ～ 6	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	8	15 ～ 495	2 ～ 18	3 ～ 6	2 ～ 42	2.6 ～ 6	-	-	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	8	15 ～ 495	2 ～ 18	3 ～ 6	2 ～ 42	-	3 ～ 6	-	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	10	15 ～ 595	2 ～ 24	-	2 ～ 56	3 ～ 6	-	4 ～ 8	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	10	15 ～ 595	2 ～ 24	-	2 ～ 56	-	3 ～ 6	4 ～ 8	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	10	15 ～ 595	2 ～ 24	4 ～ 8	2 ～ 56	3 ～ 6	-	-	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	10	15 ～ 595	2 ～ 24	4 ～ 8	2 ～ 56	-	3 ～ 6	-	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	12	15 ～ 695	2 ～ 35	-	2 ～ 70	4 ～ 8	-	5 ～ 10	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	12	15 ～ 695	2 ～ 35	-	2 ～ 70	-	4 ～ 8	5 ～ 10	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	12	15 ～ 695	2 ～ 35	5 ～ 10	2 ～ 70	4 ～ 8	-	-	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	12	15 ～ 695	2 ～ 35	5 ～ 10	2 ～ 70	-	4 ～ 8	-	-
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	13	15 ～ 895	0 ～ 65	-	2 ～ 70	3 ～ 8	-	4 ～ 10	-
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	13	15 ～ 895	0 ～ 65	-	2 ～ 70	-	3 ～ 8	4 ～ 10	-
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	13	15 ～ 895	0 ～ 65	5 ～ 10	2 ～ 70	3 ～ 8	-	-	-
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	13	15 ～ 895	0 ～ 65	5 ～ 10	2 ～ 70	-	3 ～ 8	-	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	15	15 ～ 795	2 ～ 40	-	2 ～ 84	4 ～ 10	-	5 ～ 12	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	15	15 ～ 795	2 ～ 40	-	2 ～ 84	-	4 ～ 10	5 ～ 12	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	15	15 ～ 795	2 ～ 40	5 ～ 12	2 ～ 84	4 ～ 10	-	-	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	15	15 ～ 795	2 ～ 40	5 ～ 12	2 ～ 84	-	4 ～ 10	-	-
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	16	15 ～ 995	0 ～ 42	-	2 ～ 84	4 ～ 12	-	4 ～ 12	-
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	16	15 ～ 995	0 ～ 42	-	2 ～ 84	-	4 ～ 12	4 ～ 12	-
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	16	15 ～ 995	0 ～ 42	5 ～ 12	2 ～ 84	4 ～ 12	-	-	-
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	16	15 ～ 995	0 ～ 42	5 ～ 12	2 ～ 84	-	4 ～ 12	-	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	17	30 ～ 895	2 ～ 36	-	2 ～ 84	4 ～ 12	-	5 ～ 12	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	17	30 ～ 895	2 ～ 36	-	2 ～ 84	-	4 ～ 12	5 ～ 12	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	17	30 ～ 895	2 ～ 36	6 ～ 15	2 ～ 84	4 ～ 12	-	-	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	17	30 ～ 895	2 ～ 36	6 ～ 15	2 ～ 84	-	4 ～ 12	-	-
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	18	24 ～ 995	0 ～ 36	-	2 ～ 84	4 ～ 12	-	5 ～ 16	-
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	18	24 ～ 995	0 ～ 36	-	2 ～ 84	-	4 ～ 12	5 ～ 16	-
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	18	24 ～ 995	0 ～ 36	6 ～ 15	2 ～ 84	4 ～ 12	-	-	-
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	18	24 ～ 995	0 ～ 36	6 ～ 15	2 ～ 84	-	4 ～ 12	-	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	20	30 ～ 995	2 ～ 49	-	2 ～ 112	4 ～ 16	-	5 ～ 16	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	20	30 ～ 995	2 ～ 49	-	2 ～ 112	-	4 ～ 16	5 ～ 16	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	20	30 ～ 995	2 ～ 49	6 ～ 17	2 ～ 112	4 ～ 16	-	-	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	20	30 ～ 995	2 ～ 49	6 ～ 17	2 ～ 112	-	4 ～ 16	-	-
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	22	24 ～ 995	0 ～ 57	-	2 ～ 112	4 ～ 16	-	5 ～ 20	-
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	22	24 ～ 995	0 ～ 57	-	2 ～ 112	-	4 ～ 16	5 ～ 20	-
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	22	24 ～ 995	0 ～ 57	6 ～ 17	2 ～ 112	4 ～ 16	-	-	-
-	1	6 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	22	24 ～ 995	0 ～ 57	6 ～ 17	2 ～ 112	-	4 ～ 16	-	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	25	50 ～ 995	2 ～ 60	-	3 ～ 140	4 ～ 16	-	6 ～ 20	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	25	50 ～ 995	2 ～ 60	-	3 ～ 140	-	4 ～ 16	6 ～ 20	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	25	50 ～ 995	2 ～ 60	8 ～ 20	3 ～ 140	4 ～ 16	-	-	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	25	50 ～ 995	2 ～ 60	8 ～ 20	3 ～ 140	-	4 ～ 16	-	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	30	60 ～ 995	2 ～ 95	-	3 ～ 168	6 ～ 20	-	8 ～ 24	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	30	60 ～ 995	2 ～ 95	-	3 ～ 168	-	6 ～ 20	8 ～ 24	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	30	60 ～ 995	2 ～ 95	8 ～ 25	3 ～ 168	6 ～ 20	-	-	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	30	60 ～ 995	2 ～ 95	8 ～ 25	3 ～ 168	-	6 ～ 20	-	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	35	70 ～ 995	2 ～ 90	-	3 ～ 210	6 ～ 24	-	10 ～ 30	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	35	70 ～ 995	2 ～ 90	-	3 ～ 210	-	6 ～ 20	10 ～ 30	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	35	70 ～ 995	2 ～ 90	10 ～ 30	3 ～ 210	6 ～ 24	-	-	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	35	70 ～ 995	2 ～ 90	10 ～ 30	3 ～ 210	-	6 ～ 20	-	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	40	80 ～ 995	2 ～ 90	-	5 ～ 210	10 ～ 30	-	12 ～ 30	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	40	80 ～ 995	2 ～ 90	-	5 ～ 210	-	10 ～ 20	12 ～ 30	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	40	80 ～ 995	2 ～ 90	12 ～ 35	5 ～ 210	10 ～ 30	-	-	-
-	1	9 Days	10	[Steel] EN 1.1191 Equiv.	[Surface Treatment Provided] Electroless Nickel Plating	g6 (Ground)	40	80 ～ 995	2 ～ 90	12 ～ 35	5 ～ 210	-	10 ～ 20	-	-

1
2
3
4
5
Next >>

Example of Use

Products homepage

Basic information

Basic Shape	One End Stepped	End Shape (Left)	Threads	End Shape (Right)	Tapped
Hardness	No Hardened	Keyway	Keyway Option (Alteration)

Configure

1,062Suggestion of an applicable part number.

View Part Numbers

Some specification is not specified yet.

The part number is completed.

Basic Attributes

Material
- Steel
  - EN 1.1191 Equiv.
- Stainless Steel
  - EN 1.4301 Equiv.
Clear
Surface Treatment
- NA
- Surface Treatment Provided
  - Black Oxide
  - Electroless Nickel Plating
Clear
D Tolerance
- h9 (Cold-drawn)
- h7 (Ground)
- g6 (Ground)
Clear
Shaft Dia. D(mm)
6

8

10

12

13

15

16

17

18

20

22

25

30

35

40

50
Clear
Length L(mm)
[15-995/0.1mm Unit(s)][15-895/1mm Unit(s)]
Clear
B(mm)
0
[0-95/1mm Unit(s)]
Clear
Change to Fine Threads [PMC](mm)
3

4

5

6

8

10

12

15

17

20

25

30

35

40
Clear
F(mm)
[2-210/0.1mm Unit(s)]
Clear
N(mm)
2.6

3

4

5

6

8

10

12

16

20

24

30
Clear
ND
3

4

5

6

8

10

12

16

20
Clear
P(mm)
3

4

5

6

8

10

12

16

20

24

30
Clear
Wrench Flats Machining [SC](mm)
[0-985/1mm Unit(s)]
Clear
Type
- PSFRD
- PSFRDS
- PSFRHD
- PSFRHDS
- PSFRMGD
- PSFRMGDS
- PSFRMHD
- PSFRMHDS
- SFRD
- SFRDS
- SFRHD
- SFRHDS
- SFRMGD
- SFRMGDS
- SFRMHD
- SFRMHDS
- SSFRD
- SSFRDS
- SSFRHD
- SSFRHDS
- SSFRMGD
- SSFRMGDS
- SSFRMHD
- SSFRMHDS
Clear
Filter by CAD data type
- 2D
- 3D
Clear