MISUMIS START
Automation Components
Rotary Motion
Cam Followers, Roller Followers
Cam Followers / Hex Socket on Head / Thread / Flat Type

Filtreringsvillkor

Lager
Visa endast lagervaror

Characteristics/Applications

O.D. D(φ)

Width B(mm)

Material

Carbon steel

EN 1.3505 Equiv.

Stainless Steel

EN 1.4125 Equiv.

Allowable Rotational Speed(1/min)

1610
1800
2030
2320
2380
2660
3500
4550
4900
5000
5950
6500
7000
8500
9800
10000

Seals

Application

Cam Follower Stud Thread (Fine)(mm)

Rolling Guide Method

Type

CAD

Uppskattade leveransdagar

Alla
Skicka samma dag går att få
Inom 5 arbetsdagar
Inom 7 arbetsdagar
Inom 8 arbetsdagar

MISUMI

Cam Followers / Hex Socket on Head / Thread / Flat Type

KatalogS.1-1044-2

Artikelnummer:

Ej färdigt: 66 kandidater hittades.

Skiss och specifikationstabell
Artikelnummerlista
Detaljerad information
Katalog

Skiss och specifikationstabell

Drawing

(*)

Cam Follower - Hex Socket on Head and Thread, Flat: Related Image

D	Tolerance
30	0 －0.009
32 to 47	0 －0.011
52 to 80	0 －0.013
80 to 90	0 －0.015

■With Seal

Cam Follower - Hex Socket on Head and Thread, Flat: Related Image

■No Seal

Cam Follower - Hex Socket on Head and Thread, Flat: Related Image

Type			[M] Material	[A] Accessory
Application	With Seal	No Seal	[M] Material	[A] Accessory
General	CFFH	CFAH	EN 1.3505 Equiv.	Hex Nut 1 pc. (EN 1.1191 Equiv., Black Oxide)
General	CFFSH	CFASH	EN 1.4125 Equiv.	Hex Nut 1 pc. (EN 1.4301 Equiv.)
Low Dust Generation	CFFCH	—	EN 1.4125 Equiv.	Hex Nut 1 pc. (EN 1.4301 Equiv.)
Heavy Load	CFFGH	—	EN 1.3505 Equiv.	Hex Nut 1 pc. (EN 1.1191 Equiv., Black Oxide)

·Use THK Grease Gun Unit MG70 Attachment Type P when replenishing grease from the grease nipple.
·Operating Temperature Range: −15°C to 80°C (If the temperature exceeds 80°C, plastic and rubber parts may be deformed or damaged)

Specification Table

Part Number	—	D
CFFH20	—	52

Part Number			D	M × Pitch	B	B₁	L	d₁	ℓ	ℓ₁	r	f (Min.)	H	Mass (g)	Max. Tightening Torque (N⋅m)
Type	d_h7 Tolerance		(Selectable)
(With Seal) CFFH CFFSH CFFCH CFFGH (No Seal) CFAH CFASH	12	0 −0.018	30	12 × 1.5	14	15	40	3	14	6	1.5	20	6	105 (107)	29.4
			32											115 (117)
	16		35	16 × 1.5	18	19.5	52		18	8		24		205 (207)	70.6
	18		40	18 × 1.5	20	21.5	58		20			26		295 (300)	98
	20	0 −0.021	47	20 × 1.5	24	25.5	66	4	22	9		36	8	450 (455)	137
			52											525 (530)
	24		62	24 × 1.5	29	30.5	80		25	11		40		915 (925)	245※
			72											1150 (1160)
	30		80	30 × 1.5	35	37	100		32	15	2	46		1880 (1890)	480※
			85											1950 (1960)
			90											2000 (2010)

* When using stainless steel, it will be up to 70% of this value.
[ ! ] ( ) is the weight of Heavy Load Type.
[ ! ] 1 N⋅m = 0.102 kgf·m.

Part Number Substitution Table for Cam Follower Standard Changes (D30 to 40, 52 only)

Type	Old Part Number (D30 to 40, 52 only)			New Part Number
Type	Old Standard	Old Hex Socket Type	Old Threaded Section With Hex Socket	Head and Thread With Hex Socket
Cam Followers	CFUR	CFUA	CFUB	CFUH
	CFURS	CFUAS	—	CFUSH
	CFURC	CFUAC	—	CFUCH
	—	CFUAG	—	CFUGH
	CFU	CUA	—	CUH
	CFUS	CUAS	—	CUSH
	CFFR	CFFA	CFFB	CFFH
	CFFRS	CFFAS	—	CFFSH
	CFFRC	CFFAC	—	CFFCH
	—	CFFAG	—	CFFGH
	CFR	CFA	—	CFAH
	CFRS	CFAS	—	CFASH

Table 1: Reference Data of Cam Followers

d-D	General								Heavy Load
	Basic Dynamic Load Rating Load C (kN)	Basic Static Load Rating Load Cor (kN)	Max. Allowable Load (kN)	Track Load Capacity (kN)		Max. Rotational Speed (rpm)		Mass (g)	Basic Dynamic Load Rating Load C (kN)	Basic Static Load Rating Load Cor (kN)	Max. Allowable Load (kN)	Track Load Capacity (kN)		Max. Rotational Speed With Seal (rpm)	Mass (g)
				Track Load Capacity (kN)		With Seal	No Seal					Track Load Capacity (kN)
				Crowned	Flat	With Seal	No Seal					Crowned	Flat
3−10	1.47	1.18	0.36	0.37	1.37	32900	47000	4.5	—	—	—	—	—	—	—
4−12	2.06	2.05	0.78	0.47	1.76	25900	37000	7.5	—	—	—	—	—	—	—
5−13	3.14	2.77	1.42	0.53	2.25	20300	29000	10.5	—	—	—	—	—	—	—
6−16	3.59	3.58	2.11	1.08	3.43	17500	25000	18.5	6.94	8.5	2.11	1.08	3.43	7700	19
8−19	4.17	4.65	4.73	1.37	4.02	14000	20000	28.5	8.13	11.2	4.73	1.37	4.02	6090	29
10−22	5.33	6.78	5.81	1.67	4.7	11900	17000	45	9.42	14.3	5.81	1.67	4.7	5040	46
10−26	5.33	6.78	5.81	2.06	5.49	11900	17000	60	9.42	14.3	5.81	2.06	5.49	5040	61
12−30	7.87	9.79	9.37	2.45	7.06	9800	14000	105	13.4	19.8	9.37	2.45	7.06	4060	107
12−32	7.87	9.79	9.37	2.74	7.45	9800	14000	115	13.4	19.8	9.37	2.74	7.45	4060	117
16−35	12	18.3	17.3	3.14	11.2	7000	10000	205	20.6	37.6	17.3	3.14	11.2	3150	207
18−40	14.7	25.2	26.1	3.72	14.4	5950	8500	295	25.2	51.3	26.1	3.72	14.4	2660	300
20-47	20.7	34.8	32.1	7.15	21	4900	7000	450	33.2	64.8	32.1	7.15	21	2380	455
20−52	20.7	34.8	32.1	8.23	23.2	4900	7000	525	33.2	64.8	32.1	8.23	23.2	2380	530
24-62	30.6	53.2	49.5	10.5	34.2	4550	6500	915	46.7	92.9	49.5	10.5	34.2	2030	925
24-72	30.6	53.2	49.5	12.9	39.8	4550	6500	1150	46.7	92.9	49.5	12.9	39.8	2030	1160
30-80	45.4	87.6	73.7	14.9	52.6	3500	5000	1880	67.6	145	73.7	14.9	52.6	1610	1890
30-85				16.1	56			1950				16.1	56		1960
30-90				17.3	59.3			2000				17.3	59.3		2010

[!] kgf = N × 0.101972

Cautions / Prohibitions

·Dropping or hitting may damage the product.
·Please note that when shock was applied, the product may lose its function even though there is no visible damage outside.
·Cam Followers can bear radial load, but they are not designed to support thrust load. Please avoid using them to bear thrust load.
·Some types are not filled with grease depending on the size.
See the table below and lubricate the ones not filled with the grease before using them.

·Grease Performance and Operation Temperature of Cam Followers

		General Purpose Grease Filled (AFB-LF Grease)	Low Dust Generation Grease Filled (AFE-CA Grease)
Grease Performance	Thickener	Lithium Soap	Urea Inductor
	Base Oil	Refined Mineral Oil	Synthetic Oil
	Base Oil Dynamic Viscosity (40°C, mm²/s)	170	100
	Worked Penetration (25°C ·60W)	275	260
	Dropping Point (°C)	193	258
	Evaporation Amount: wt% (99°C, 22 h)	0.36	0.1
	Oil Separation: wt% (100°C, 24 h)	0.6	0.8
Operating Temperature (°C)	In Air	−15 to +100	−40 to +160
Operating Temperature (°C)	In Vacuum	Unsuitable	Unsuitable

Artikelnummerlista

Antal artiklar

Nästa

Artikelnummer

Characteristics/Applications

O.D. D

(φ)

Width B

(mm)

Material

Basic Load Rating Cr (Dynamic)

(kN)

Basic Load Rating Cor (Static)

(kN)

Allowable Rotational Speed

(1/min)

Seals

Application

Cam Follower Stud Thread (Fine)

(mm)

Rolling Guide Method

RoHS?

Minsta beställningsantal

Not Applicable	30	14	[Carbon steel] EN 1.3505 Equiv.	7.87	9.79	9800	Not Provided	General	M12×1.5	With Retainer	10	1 stycken
Not Applicable	32	14	[Carbon steel] EN 1.3505 Equiv.	7.87	9.79	9800	Not Provided	General	M12×1.5	With Retainer	10	1 stycken
Not Applicable	35	18	[Carbon steel] EN 1.3505 Equiv.	12	18.3	7000	Not Provided	General	M16×1.5	With Retainer	10	1 stycken
Not Applicable	40	20	[Carbon steel] EN 1.3505 Equiv.	14.7	25.2	5950	Not Provided	General	M18×1.5	With Retainer	10	1 stycken
Not Applicable	47	24	[Carbon steel] EN 1.3505 Equiv.	20.7	34.8	7000	Not Provided	General	M20×1.5	With Retainer	-	1 stycken
Not Applicable	52	24	[Carbon steel] EN 1.3505 Equiv.	20.7	34.8	4900	Not Provided	General	M20×1.5	With Retainer	10	1 stycken
Not Applicable	62	29	[Carbon steel] EN 1.3505 Equiv.	30.6	53.2	6500	Not Provided	General	M24×1.5	With Retainer	-	1 stycken
Not Applicable	72	29	[Carbon steel] EN 1.3505 Equiv.	30.6	53.2	6500	Not Provided	General	M24×1.5	With Retainer	-	1 stycken
Not Applicable	80	35	[Carbon steel] EN 1.3505 Equiv.	45.4	87.6	5000	Not Provided	General	M30×1.5	With Retainer	-	1 stycken
Not Applicable	85	35	[Carbon steel] EN 1.3505 Equiv.	45.4	87.6	5000	Not Provided	General	M30×1.5	With Retainer	-	1 stycken
Not Applicable	90	35	[Carbon steel] EN 1.3505 Equiv.	45.4	87.6	5000	Not Provided	General	M30×1.5	With Retainer	-	1 stycken
Corrosion Resistant / Chemical Resistant / Heat Resistance	30	14	[Stainless Steel] EN 1.4125 Equiv.	7.87	9.79	9800	Not Provided	General	M12×1.5	With Retainer	10	1 stycken
Corrosion Resistant / Chemical Resistant / Heat Resistance	32	14	[Stainless Steel] EN 1.4125 Equiv.	7.87	9.79	9800	Not Provided	General	M12×1.5	With Retainer	10	1 stycken
Corrosion Resistant / Chemical Resistant / Heat Resistance	35	18	[Stainless Steel] EN 1.4125 Equiv.	12	18.3	10000	Not Provided	General	M16×1.5	With Retainer	-	1 stycken
Corrosion Resistant / Chemical Resistant / Heat Resistance	40	20	[Stainless Steel] EN 1.4125 Equiv.	14.7	25.2	8500	Not Provided	General	M18×1.5	With Retainer	-	1 stycken
Corrosion Resistant / Chemical Resistant / Heat Resistance	47	24	[Stainless Steel] EN 1.4125 Equiv.	20.7	34.8	7000	Not Provided	General	M20×1.5	With Retainer	-	1 stycken
Corrosion Resistant / Chemical Resistant / Heat Resistance	52	24	[Stainless Steel] EN 1.4125 Equiv.	20.7	34.8	7000	Not Provided	General	M20×1.5	With Retainer	-	1 stycken
Corrosion Resistant / Chemical Resistant / Heat Resistance	62	29	[Stainless Steel] EN 1.4125 Equiv.	30.6	53.2	6500	Not Provided	General	M24×1.5	With Retainer	-	1 stycken
Corrosion Resistant / Chemical Resistant / Heat Resistance	72	29	[Stainless Steel] EN 1.4125 Equiv.	30.6	53.2	6500	Not Provided	General	M24×1.5	With Retainer	-	1 stycken
Corrosion Resistant / Chemical Resistant / Heat Resistance	80	35	[Stainless Steel] EN 1.4125 Equiv.	45.4	87.6	3500	Not Provided	General	M30×1.5	With Retainer	-	1 stycken
Corrosion Resistant / Chemical Resistant / Heat Resistance	85	35	[Stainless Steel] EN 1.4125 Equiv.	45.4	87.6	3500	Not Provided	General	M30×1.5	With Retainer	-	1 stycken
Corrosion Resistant / Chemical Resistant / Heat Resistance	90	35	[Stainless Steel] EN 1.4125 Equiv.	45.4	87.6	3500	Not Provided	General	M30×1.5	With Retainer	-	1 stycken
Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance	30	14	[Stainless Steel] EN 1.4125 Equiv.	7.87	9.79	9800	Provided	Low Dust Generation	M12×1.5	With Retainer	10	1 stycken
Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance	32	14	[Stainless Steel] EN 1.4125 Equiv.	7.87	9.79	9800	Provided	Low Dust Generation	M12×1.5	With Retainer	10	1 stycken
Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance	35	18	[Stainless Steel] EN 1.4125 Equiv.	12	18.3	7000	Provided	Low Dust Generation	M16×1.5	With Retainer	10	1 stycken
Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance	40	20	[Stainless Steel] EN 1.4125 Equiv.	14.7	25.2	5950	Provided	Low Dust Generation	M18×1.5	With Retainer	-	1 stycken
Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance	47	24	[Stainless Steel] EN 1.4125 Equiv.	20.7	34.8	4900	Provided	Low Dust Generation	M20×1.5	With Retainer	-	1 stycken
Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance	52	24	[Stainless Steel] EN 1.4125 Equiv.	20.7	34.8	4900	Provided	Low Dust Generation	M20×1.5	With Retainer	-	1 stycken
Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance	62	29	[Stainless Steel] EN 1.4125 Equiv.	30.6	53.2	4550	Provided	Low Dust Generation	M24×1.5	With Retainer	-	1 stycken
Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance	72	29	[Stainless Steel] EN 1.4125 Equiv.	30.6	53.2	4550	Provided	Low Dust Generation	M24×1.5	With Retainer	-	1 stycken
Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance	80	35	[Stainless Steel] EN 1.4125 Equiv.	45.4	87.6	3500	Provided	Low Dust Generation	M30×1.5	With Retainer	-	1 stycken
Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance	85	35	[Stainless Steel] EN 1.4125 Equiv.	45.4	87.6	3500	Provided	Low Dust Generation	M30×1.5	With Retainer	-	1 stycken
Low Dust Generation / Corrosion Resistant / Chemical Resistant / Heat Resistance	90	35	[Stainless Steel] EN 1.4125 Equiv.	45.4	87.6	3500	Provided	Low Dust Generation	M30×1.5	With Retainer	-	1 stycken
Not Applicable	30	14	[Carbon steel] EN 1.3505 Equiv.	13.4	19.8	2320	Provided	Heavy Load	M12×1.5	Full Roller	10	1 stycken
Not Applicable	32	14	[Carbon steel] EN 1.3505 Equiv.	13.4	19.8	2320	Provided	Heavy Load	M12×1.5	Full Roller	10	1 stycken
Not Applicable	35	18	[Carbon steel] EN 1.3505 Equiv.	20.6	37.6	1800	Provided	Heavy Load	M16×1.5	Full Roller	10	1 stycken
Not Applicable	40	20	[Carbon steel] EN 1.3505 Equiv.	25.2	51.3	2660	Provided	Heavy Load	M18×1.5	Full Roller	-	1 stycken
Not Applicable	47	24	[Carbon steel] EN 1.3505 Equiv.	33.2	64.8	2380	Provided	Heavy Load	M20×1.5	Full Roller	-	1 stycken
Not Applicable	52	24	[Carbon steel] EN 1.3505 Equiv.	33.2	64.8	2380	Provided	Heavy Load	M20×1.5	Full Roller	-	1 stycken
Not Applicable	62	29	[Carbon steel] EN 1.3505 Equiv.	46.7	92.9	2030	Provided	Heavy Load	M24×1.5	Full Roller	-	1 stycken
Not Applicable	72	29	[Carbon steel] EN 1.3505 Equiv.	46.7	92.9	2030	Provided	Heavy Load	M24×1.5	Full Roller	-	1 stycken
Not Applicable	80	35	[Carbon steel] EN 1.3505 Equiv.	67.6	145	1610	Provided	Heavy Load	M30×1.5	Full Roller	-	1 stycken
Not Applicable	85	35	[Carbon steel] EN 1.3505 Equiv.	67.6	145	1610	Provided	Heavy Load	M30×1.5	Full Roller	-	1 stycken
Not Applicable	90	35	[Carbon steel] EN 1.3505 Equiv.	67.6	145	1610	Provided	Heavy Load	M30×1.5	Full Roller	-	1 stycken
Not Applicable	30	14	[Carbon steel] EN 1.3505 Equiv.	7.87	9.79	9800	Provided	General	M12×1.5	With Retainer	10	1 stycken
Not Applicable	32	14	[Carbon steel] EN 1.3505 Equiv.	7.87	9.79	9800	Provided	General	M12×1.5	With Retainer	10	1 stycken
Not Applicable	35	18	[Carbon steel] EN 1.3505 Equiv.	12	18.3	7000	Provided	General	M16×1.5	With Retainer	10	1 stycken
Not Applicable	40	20	[Carbon steel] EN 1.3505 Equiv.	14.7	25.2	5950	Provided	General	M18×1.5	With Retainer	10	1 stycken
Not Applicable	47	24	[Carbon steel] EN 1.3505 Equiv.	20.7	34.8	4900	Provided	General	M20×1.5	With Retainer	-	1 stycken
Not Applicable	52	24	[Carbon steel] EN 1.3505 Equiv.	20.7	34.8	4900	Provided	General	M20×1.5	With Retainer	10	1 stycken
Not Applicable	62	29	[Carbon steel] EN 1.3505 Equiv.	30.6	53.2	4550	Provided	General	M24×1.5	With Retainer	-	1 stycken
Not Applicable	72	29	[Carbon steel] EN 1.3505 Equiv.	30.6	53.2	4550	Provided	General	M24×1.5	With Retainer	-	1 stycken
Not Applicable	80	35	[Carbon steel] EN 1.3505 Equiv.	45.4	87.6	3500	Provided	General	M30×1.5	With Retainer	-	1 stycken
Not Applicable	85	35	[Carbon steel] EN 1.3505 Equiv.	45.4	87.6	3500	Provided	General	M30×1.5	With Retainer	-	1 stycken
Not Applicable	90	35	[Carbon steel] EN 1.3505 Equiv.	45.4	87.6	3500	Provided	General	M30×1.5	With Retainer	-	1 stycken
Corrosion Resistant / Chemical Resistant / Heat Resistance	30	14	[Stainless Steel] EN 1.4125 Equiv.	7.87	9.79	9800	Provided	General	M12×1.5	With Retainer	10	1 stycken
Corrosion Resistant / Chemical Resistant / Heat Resistance	32	14	[Stainless Steel] EN 1.4125 Equiv.	7.87	9.79	9800	Provided	General	M12×1.5	With Retainer	10	1 stycken
Corrosion Resistant / Chemical Resistant / Heat Resistance	35	18	[Stainless Steel] EN 1.4125 Equiv.	12	18.3	7000	Provided	General	M16×1.5	With Retainer	10	1 stycken
Corrosion Resistant / Chemical Resistant / Heat Resistance	40	20	[Stainless Steel] EN 1.4125 Equiv.	14.7	25.2	5950	Provided	General	M18×1.5	With Retainer	10	1 stycken
Corrosion Resistant / Chemical Resistant / Heat Resistance	47	24	[Stainless Steel] EN 1.4125 Equiv.	20.7	34.8	4900	Provided	General	M20×1.5	With Retainer	-	1 stycken

Enhetspris (exklusive MOMS)(Enhetspris inklusive MOMS)	Standardavsändningsdatum

17.76 € ( 21.13 € )	Lagervara: 1 arbetsdagKan skickas samma dag
18.90 € ( 22.49 € )	Lagervara: 1 arbetsdagKan skickas samma dag
19.39 € ( 23.07 € )	5 arbetsdagar
23.93 € ( 28.48 € )	Lagervara: 1 arbetsdagKan skickas samma dag
37.11 € ( 44.16 € )	8 arbetsdagar
31.61 € ( 37.62 € )	Lagervara: 1 arbetsdagKan skickas samma dag
61.92 € ( 73.68 € )	7 arbetsdagar
70.34 € ( 83.70 € )	7 arbetsdagar
93.44 € ( 111.19 € )	8 arbetsdagar
103.27 € ( 122.89 € )	7 arbetsdagar
110.30 € ( 131.26 € )	7 arbetsdagar
34.64 € ( 41.22 € )	5 arbetsdagar
36.02 € ( 42.86 € )	5 arbetsdagar
60.61 € ( 72.13 € )	7 arbetsdagar
71.94 € ( 85.61 € )	7 arbetsdagar
91.72 € ( 109.15 € )	7 arbetsdagar
96.37 € ( 114.68 € )	7 arbetsdagar
99.89 € ( 118.87 € )	7 arbetsdagar
112.16 € ( 133.47 € )	7 arbetsdagar
141.42 € ( 168.29 € )	7 arbetsdagar
160.30 € ( 190.76 € )	7 arbetsdagar
171.67 € ( 204.29 € )	7 arbetsdagar
48.86 € ( 58.14 € )	5 arbetsdagar
50.76 € ( 60.40 € )	5 arbetsdagar
82.24 € ( 97.87 € )	5 arbetsdagar
109.78 € ( 130.64 € )	7 arbetsdagar
106.92 € ( 127.23 € )	7 arbetsdagar
111.18 € ( 132.30 € )	7 arbetsdagar
180.09 € ( 214.31 € )	7 arbetsdagar
195.21 € ( 232.30 € )	7 arbetsdagar
205.19 € ( 244.18 € )	7 arbetsdagar
259.70 € ( 309.04 € )	7 arbetsdagar
288.73 € ( 343.59 € )	7 arbetsdagar
33.24 € ( 39.56 € )	Lagervara: 1 arbetsdagKan skickas samma dag
34.75 € ( 41.35 € )	Lagervara: 1 arbetsdagKan skickas samma dag
36.02 € ( 42.86 € )	5 arbetsdagar
39.47 € ( 46.97 € )	5 arbetsdagar
50.17 € ( 59.70 € )	7 arbetsdagar
52.24 € ( 62.17 € )	5 arbetsdagar
71.91 € ( 85.57 € )	7 arbetsdagar
82.13 € ( 97.73 € )	7 arbetsdagar
118.25 € ( 140.72 € )	7 arbetsdagar
84.77 € ( 100.88 € )	7 arbetsdagar
94.26 € ( 112.17 € )	7 arbetsdagar
20.16 € ( 23.99 € )	Lagervara: 1 arbetsdagKan skickas samma dag
21.40 € ( 25.47 € )	Lagervara: 1 arbetsdagKan skickas samma dag
22.03 € ( 26.22 € )	Lagervara: 1 arbetsdagKan skickas samma dag
28.08 € ( 33.42 € )	Lagervara: 1 arbetsdagKan skickas samma dag
47.01 € ( 55.94 € )	7 arbetsdagar
36.90 € ( 43.91 € )	Lagervara: 1 arbetsdagKan skickas samma dag
65.84 € ( 78.35 € )	8 arbetsdagar
76.84 € ( 91.44 € )	7 arbetsdagar
111.12 € ( 132.23 € )	7 arbetsdagar
126.69 € ( 150.76 € )	7 arbetsdagar
84.81 € ( 100.92 € )	7 arbetsdagar
39.42 € ( 46.91 € )	Lagervara: 1 arbetsdagKan skickas samma dag
40.93 € ( 48.71 € )	5 arbetsdagar
64.98 € ( 77.33 € )	Lagervara: 1 arbetsdagKan skickas samma dag
78.08 € ( 92.92 € )	5 arbetsdagar
85.38 € ( 101.60 € )	7 arbetsdagar

Nästa

Detaljerad information

Katalog

Products homepage

Katalog (2-sidigt uppslag)