Registrera dig
Filtreringsvillkor
  • [D] Diameter (Shaft)(mm)
  • [L] Length (Shaft)(mm)
      [25-1498/1mm units]
    • Material
      • Alloyed Steel
      • Stainless Steel (martensitique)
    • Heat Treatment
    • Surface Treatment
    • ISO Tolerance
    • Hardness
    • [B] Length (thread)(mm)
        [2-205/1mm units]
      • [F] Length (stud - offset - front side)(mm)
          [2-210/1mm units]
        • [PMC] Size (fine thread)(mm)
        • [PMS] Size (fine thread)(mm)
        • [P] Diameter (stepped - front side)(mm)
        • Type
        • CAD
        • Uppskattade leveransdagar
          • Alla
          • Inom 4 arbetsdagar
          • Inom 7 arbetsdagar
          • Inom 10 arbetsdagar
          • Inom 12 arbetsdagar
        MISUMI

        Linear shafts / stepped on one side / external thread(Artikelnummerlista: 2-sida)

        Linear shafts / stepped on one side / external thread

        Artikelnummer:

        Ej färdigt: 214 kandidater hittades.
        Antal:

        Skiss och specifikationstabell

        Back to Linear Shaft Category

        Technical Drawing - Linear Shafts

         

        One End Threaded:Related Image

         

        Basic Properties (e.g. material, hardness, coating, tolerance) - Linear Shafts

         

        TypeMaterialHardnessSurface Treatment
        D Tol. g6D Tol. h5D Tol. f8
        SFANSFUN-EN 1.3505 Equiv.Effective Hardened Depth of Induction Hardening >>P.112
        EN 1.3505 Equiv. 58HRC~
        EN 1.4037 Equiv. 56HRC~        		-
        SSFANSSFUN-EN 1.4037 Equiv.
        PSFANPSFUN-EN 1.3505 Equiv.Hard Chrome Plating
        Plating Hardness: HV750 ~
        Plating Thickness: 5µ or More
        PSSFANPSSFUN-EN 1.4037 Equiv.
        RSFAN--EN 1.3505 Equiv.LTBC Plating
        --PSFGNEN 1.1191 Equiv.-Hard Chrome Plating
        Plating Hardness: HV750 ~
        Plating Thickness: 10µ or More
        --PSSFGNEN 1.4301 Equiv.

         

        Part Number1mm IncrementP
        Selection        		D Tol.(Y)Max.RC
        TypeDLFBg6h5f8
        (D Tolerance g6)
        SFAN
        SSFAN
        PSFAN
        PSSFAN


        (D Tolerance f8)
        PSFGN (D≥6)
        PSSFGN (D≥6)        		(D Tolerance h5)
        SFUN
        SSFUN
        PSFUN
        PSSFUN



                 		425~ 2982≤F≤Px5(When P≤6)
        B≤F-2

        (When P=8, 10)
        B≤F-3

        (When P≥12)
        B≤F-5

        B≥Pitchx3        		3          -0.004
        -0.012        		0
        -0.005        		-3000.2 or Less0.2 or Less
        525~ 39834         -0.004
        -0.012        		0
        -0.005        		-4000.2 or Less0.2 or Less
        625~ 598345        -0.004
        -0.012        		0
        -0.005        		-0.010
        -0.028        		6000.3 or Less0.5 or Less
        825~ 7983456       -0.005
        -0.014        		0
        -0.006        		-0.013
        -0.035        		8000.3 or Less0.5 or Less
        1025~ 798 4568      -0.005
        -0.014        		0
        -0.006        		-0.013
        -0.035        		8000.3 or Less0.5 or Less
        1225~ 998  56810     -0.006
        -0.017        		0
        -0.008        		-0.016
        -0.043        		10000.3 or Less0.5 or Less
        1325~ 998  5681012    -0.006
        -0.017        		0
        -0.008        		-0.016
        -0.043        		10000.3 or Less0.5 or Less
        1525~ 998  5681012    -0.006
        -0.017        		0
        -0.008        		-0.016
        -0.043        		10000.3 or Less0.5 or Less
        1625~1198  5681012    -0.006
        -0.017        		0
        -0.008        		-0.016
        -0.043        		12000.3 or Less0.5 or Less
        1825~1198  568101216   -0.006
        -0.017        		0
        -0.008        		-0.016
        -0.043        		12000.3 or Less0.5 or Less
        2025~1198   68101216   -0.007
        -0.020        		0
        -0.009        		-0.020
        -0.053        		12000.3 or Less0.1 or Less
        2525~1198    81012162024 -0.007
        -0.020        		0
        -0.009        		-0.020
        -0.053        		12000.3 or Less0.1 or Less
        3025~1498    81012162024 -0.007
        -0.020        		0
        -0.009        		-0.020
        -0.053        		15000.3 or Less0.1 or Less
        3525~1498     101216202430-0.009
        -0.025        		0
        -0.011        		-0.025
        -0.064        		15000.5 or Less0.1 or Less
        4025~1498      1216202430-0.009
        -0.025        		0
        -0.011        		-0.025
        -0.064        		15000.5 or Less0.1 or Less
        5025~1498       16202430-0.009
        -0.025        		0
        -0.011        		-0.025
        -0.064        		15000.5 or Less0.1 or Less
        For O.D. tolerance f8 type, D needs to be 6 or more.
         
        Part Number1mm IncrementP
        Selection        		D Tol.(Y)Max.RC
        TypeDLFBg6
        (D Tolerance g6)
        LTBC Plating
        RSFAN        		425~2982≤F≤Px5(When P≤6)
        B≤F-2

        (When P=8, 10)
        B≤F-3

        (When P≥12)
        B≤F-5

        B≥Pitchx3        		3         -0.004
        -0.012        		3000.2 or Less0.2 or Less
        525~39834        -0.004
        -0.012        		4000.2 or Less0.2 or Less
        625~500345       -0.004
        -0.012        		6000.3 or Less0.5 or Less
        825~5003456      -0.005
        -0.014        		8000.3 or Less0.5 or Less
        1025~500 4568     -0.005
        -0.014        		8000.3 or Less0.5 or Less
        1225~500  56810    -0.006
        -0.017        		10000.3 or Less0.5 or Less
        1325~500  5681012   -0.006
        -0.017        		10000.3 or Less0.5 or Less
        1525~500  5681012   -0.006
        -0.017        		10000.3 or Less0.5 or Less
        1625~500  5681012   -0.006
        -0.017        		12000.3 or Less0.5 or Less
        1825~500  568101216  -0.006
        -0.017        		12000.3 or Less0.5 or Less
        2025~500   68101216  -0.007
        -0.020        		12000.3 or Less0.1 or Less
        2525~500    81012162024-0.007
        -0.020        		12000.3 or Less0.1 or Less
        3025~500    81012162024-0.007
        -0.020        		15000.3 or Less0.1 or Less

        Further specifications can be found under the tab More Information.

         

        Composition of a Product Code - Linear Shafts

         

        Part Number-L-F-B-P
        SFAN12-500-F20-B15-P6
        SFUN8-150-F20-B15-P6
                 

         

        Alterations - Linear Shafts


        One End Threaded:Related Image

        You find further options in detail under Option Overview.

         

        Artikelnummerlista

        Antal artiklar
      • Föregående
      • 1
      • 2
      • 3
      • 4
      • Nästa
        • Artikelnummer
        PSSFAN12-[25-1198/1]-F[2-84/1]-B[2-79/1]-PMS[10,12]
        PSSFAN13-[25-1198/1]-F[2-84/1]-B[2-79/1]-P[5,6,8,10,12]
        PSSFAN13-[25-1198/1]-F[2-84/1]-B[2-79/1]-PMC[5,6,8,10]
        PSSFAN13-[25-1198/1]-F[2-84/1]-B[2-79/1]-PMS[10,12]
        PSSFAN15-[25-1198/1]-F[2-84/1]-B[2-84/1]-P[5,6,8,10,12]
        PSSFAN15-[25-1198/1]-F[2-84/1]-B[2-84/1]-PMC[5,6,8,10,12]
        PSSFAN15-[25-1198/1]-F[2-84/1]-B[2-84/1]-PMS[10,12,14]
        PSSFAN16-[25-1198/1]-F[2-112/1]-B[2-107/1]-P[5,6,8,10,12]
        PSSFAN16-[25-1198/1]-F[2-112/1]-B[2-107/1]-PMC[5,6,8,10,12,15]
        PSSFAN16-[25-1198/1]-F[2-112/1]-B[2-107/1]-PMS[10,12,14]
        PSSFAN18-[25-1198/1]-F[2-112/1]-B[2-107/1]-P[5,6,8,10,12,16]
        PSSFAN18-[25-1198/1]-F[2-112/1]-B[2-107/1]-PMC[5,6,8,10,12,15,17]
        PSSFAN18-[25-1198/1]-F[2-112/1]-B[2-107/1]-PMS[10,12,14,18]
        PSSFAN20-[25-1198/1]-F[2-140/1]-B[2-135/1]-P[6,8,10,12,16]
        PSSFAN20-[25-1198/1]-F[2-140/1]-B[2-135/1]-PMC[6,8,10,12,15,17]
        PSSFAN20-[25-1198/1]-F[2-140/1]-B[2-135/1]-PMS[10,12,14,18]
        PSSFAN25-[25-1198/1]-F[2-168/1]-B[2-163/1]-P[8,10,12,16,20,24]
        PSSFAN25-[25-1198/1]-F[2-168/1]-B[2-163/1]-PMC[8,10,12,15,17,20]
        PSSFAN25-[25-1198/1]-F[2-168/1]-B[2-163/1]-PMS[10,12,14,18]
        PSSFAN30-[25-1498/1]-F[2-210/1]-B[2-205/1]-P[8,10,12,16,20,24]
        PSSFAN30-[25-1498/1]-F[2-210/1]-B[2-205/1]-PMC[8,10,12,15,17,20,25]
        PSSFAN30-[25-1498/1]-F[2-210/1]-B[2-205/1]-PMS[10,12,14,18]
        PSSFAN35-[25-1498/1]-F[2-210/1]-B[2-205/1]-P[10,12,16,20,24,30]
        PSSFAN35-[25-1498/1]-F[2-210/1]-B[2-205/1]-PMC[10,12,15,17,20,25]
        PSSFAN35-[25-1498/1]-F[2-210/1]-B[2-205/1]-PMS[10,12,14,18]
        PSSFAN40-[25-1498/1]-F[2-210/1]-B[2-205/1]-P[12,16,20,24,30]
        PSSFAN40-[25-1498/1]-F[2-210/1]-B[2-205/1]-PMC[12,15,17,20,25,30]
        PSSFAN40-[25-1498/1]-F[2-210/1]-B[2-205/1]-PMS[12,14,18]
        PSSFAN50-[25-1498/1]-F[2-210/1]-B[2-205/1]-P[16,20,24,30]
        PSSFAN50-[25-1498/1]-F[2-210/1]-B[2-205/1]-PMC[15,17,20,25,30]
        PSSFAN50-[25-1498/1]-F[2-210/1]-B[2-205/1]-PMS[14,18]
        RSFAN4-[25-298/1]-F[2-20/1]-B[2-20/1]-P3
        RSFAN4-[25-298/1]-F[2-20/1]-B[2-20/1]-PMC3
        RSFAN5-[25-398/1]-F[2-25/1]-B[2-25/1]-P[3,4]
        RSFAN5-[25-398/1]-F[2-25/1]-B[2-25/1]-PMC[3,4]
        RSFAN6-[25-500/1]-F[2-30/1]-B[2-30/1]-P[3,4,5]
        RSFAN6-[25-500/1]-F[2-30/1]-B[2-30/1]-PMC[3,4,5]
        RSFAN8-[25-500/1]-F[2-40/1]-B[2-40/1]-P[3,4,5,6]
        RSFAN8-[25-500/1]-F[2-40/1]-B[2-40/1]-PMC[3,4,5,6]
        RSFAN10-[25-500/1]-F[2-50/1]-B[2-50/1]-P[4,5,6,8]
        RSFAN10-[25-500/1]-F[2-50/1]-B[2-50/1]-PMC[4,5,6,8]
        RSFAN10-[25-500/1]-F[2-50/1]-B[2-50/1]-PMS10
        RSFAN12-[25-500/1]-F[2-60/1]-B[2-60/1]-P[5,6,8,10]
        RSFAN12-[25-500/1]-F[2-60/1]-B[2-60/1]-PMC[5,6,8,10]
        RSFAN12-[25-500/1]-F[2-60/1]-B[2-60/1]-PMS[10,12]
        RSFAN13-[25-500/1]-F[2-60/1]-B[2-60/1]-P[5,6,8,10,12]
        RSFAN13-[25-500/1]-F[2-60/1]-B[2-60/1]-PMC[5,6,8,10]
        RSFAN13-[25-500/1]-F[2-60/1]-B[2-60/1]-PMS[10,12]
        RSFAN15-[25-500/1]-F[2-60/1]-B[2-60/1]-P[5,6,8,10,12]
        RSFAN15-[25-500/1]-F[2-60/1]-B[2-60/1]-PMC[5,6,8,10,12]
        RSFAN15-[25-500/1]-F[2-60/1]-B[2-60/1]-PMS[10,12,14]
        RSFAN16-[25-500/1]-F[2-80/1]-B[2-80/1]-P[5,6,8,10,12]
        RSFAN16-[25-500/1]-F[2-80/1]-B[2-80/1]-PMC[5,6,8,10,12,15]
        RSFAN16-[25-500/1]-F[2-80/1]-B[2-80/1]-PMS[10,12,14]
        RSFAN18-[25-500/1]-F[2-80/1]-B[2-80/1]-P[5,6,8,10,12,16]
        RSFAN18-[25-500/1]-F[2-80/1]-B[2-80/1]-PMC[5,6,8,10,12,15,17]
        RSFAN18-[25-500/1]-F[2-80/1]-B[2-80/1]-PMS[10,12,14,18]
        RSFAN20-[25-500/1]-F[2-100/1]-B[2-100/1]-P[6,8,10,12,16]
        RSFAN20-[25-500/1]-F[2-100/1]-B[2-100/1]-PMC[6,8,10,12,15,17]
        RSFAN20-[25-500/1]-F[2-100/1]-B[2-100/1]-PMS[10,12,14,18]

        [D] Diameter (Shaft)

        (mm)

        [L] Length (Shaft)

        (mm)

        Material

        Heat Treatment

        Surface Treatment

        ISO Tolerance

        Hardness

        [B] Length (thread)

        (mm)

        [F] Length (stud - offset - front side)

        (mm)

        [PMC] Size (fine thread)

        (mm)

        [PMS] Size (fine thread)

        (mm)

        [P] Diameter (stepped - front side)

        (mm)

        		RoHS?Minsta beställningsantal
        12
        25 ～ 1198
        [Stainless Steel (martensitique)] EN 1.4037 Equiv.
        Induction Hardened
        Hard Chrome Plating
        g6
        Induction Hardening (56HRC~)
        2 ～ 79
        2 ～ 84
        -
        10 ～ 12
        -
        10
        1 stycken
        13
        25 ～ 1198
        [Stainless Steel (martensitique)] EN 1.4037 Equiv.
        Induction Hardened
        Hard Chrome Plating
        g6
        Induction Hardening (56HRC~)
        2 ～ 79
        2 ～ 84
        -
        -
        5 ～ 12
        10
        1 stycken
        13
        25 ～ 1198
        [Stainless Steel (martensitique)] EN 1.4037 Equiv.
        Induction Hardened
        Hard Chrome Plating
        g6
        Induction Hardening (56HRC~)
        2 ～ 79
        2 ～ 84
        5 ～ 10
        -
        -
        10
        1 stycken
        13
        25 ～ 1198
        [Stainless Steel (martensitique)] EN 1.4037 Equiv.
        Induction Hardened
        Hard Chrome Plating
        g6
        Induction Hardening (56HRC~)
        2 ～ 79
        2 ～ 84
        -
        10 ～ 12
        -
        10
        1 stycken
        15
        25 ～ 1198
        [Stainless Steel (martensitique)] EN 1.4037 Equiv.
        Induction Hardened
        Hard Chrome Plating
        g6
        Induction Hardening (56HRC~)
        2 ～ 84
        2 ～ 84
        -
        -
        5 ～ 12
        10
        1 stycken
        15
        25 ～ 1198
        [Stainless Steel (martensitique)] EN 1.4037 Equiv.
        Induction Hardened
        Hard Chrome Plating
        g6
        Induction Hardening (56HRC~)
        2 ～ 84
        2 ～ 84
        5 ～ 12
        -
        -
        10
        1 stycken
        15
        25 ～ 1198
        [Stainless Steel (martensitique)] EN 1.4037 Equiv.
        Induction Hardened
        Hard Chrome Plating
        g6
        Induction Hardening (56HRC~)
        2 ～ 84
        2 ～ 84
        -
        10 ～ 14
        -
        10
        1 stycken
        16
        25 ～ 1198
        [Stainless Steel (martensitique)] EN 1.4037 Equiv.
        Induction Hardened
        Hard Chrome Plating
        g6
        Induction Hardening (56HRC~)
        2 ～ 107
        2 ～ 112
        -
        -
        5 ～ 12
        10
        1 stycken
        16
        25 ～ 1198
        [Stainless Steel (martensitique)] EN 1.4037 Equiv.
        Induction Hardened
        Hard Chrome Plating
        g6
        Induction Hardening (56HRC~)
        2 ～ 107
        2 ～ 112
        5 ～ 15
        -
        -
        10
        1 stycken
        16
        25 ～ 1198
        [Stainless Steel (martensitique)] EN 1.4037 Equiv.
        Induction Hardened
        Hard Chrome Plating
        g6
        Induction Hardening (56HRC~)
        2 ～ 107
        2 ～ 112
        -
        10 ～ 14
        -
        10
        1 stycken
        18
        25 ～ 1198
        [Stainless Steel (martensitique)] EN 1.4037 Equiv.
        Induction Hardened
        Hard Chrome Plating
        g6
        Induction Hardening (56HRC~)
        2 ～ 107
        2 ～ 112
        -
        -
        5 ～ 16
        10
        1 stycken
        18
        25 ～ 1198
        [Stainless Steel (martensitique)] EN 1.4037 Equiv.
        Induction Hardened
        Hard Chrome Plating
        g6
        Induction Hardening (56HRC~)
        2 ～ 107
        2 ～ 112
        5 ～ 17
        -
        -
        10
        1 stycken
        18
        25 ～ 1198
        [Stainless Steel (martensitique)] EN 1.4037 Equiv.
        Induction Hardened
        Hard Chrome Plating
        g6
        Induction Hardening (56HRC~)
        2 ～ 107
        2 ～ 112
        -
        10 ～ 18
        -
        10
        1 stycken
        20
        25 ～ 1198
        [Stainless Steel (martensitique)] EN 1.4037 Equiv.
        Induction Hardened
        Hard Chrome Plating
        g6
        Induction Hardening (56HRC~)
        2 ～ 135
        2 ～ 140
        -
        -
        6 ～ 16
        10
        1 stycken
        20
        25 ～ 1198
        [Stainless Steel (martensitique)] EN 1.4037 Equiv.
        Induction Hardened
        Hard Chrome Plating
        g6
        Induction Hardening (56HRC~)
        2 ～ 135
        2 ～ 140
        6 ～ 17
        -
        -
        10
        1 stycken
        20
        25 ～ 1198
        [Stainless Steel (martensitique)] EN 1.4037 Equiv.
        Induction Hardened
        Hard Chrome Plating
        g6
        Induction Hardening (56HRC~)
        2 ～ 135
        2 ～ 140
        -
        10 ～ 18
        -
        10
        1 stycken
        25
        25 ～ 1198
        [Stainless Steel (martensitique)] EN 1.4037 Equiv.
        Induction Hardened
        Hard Chrome Plating
        g6
        Induction Hardening (56HRC~)
        2 ～ 163
        2 ～ 168
        -
        -
        8 ～ 24
        10
        1 stycken
        25
        25 ～ 1198
        [Stainless Steel (martensitique)] EN 1.4037 Equiv.
        Induction Hardened
        Hard Chrome Plating
        g6
        Induction Hardening (56HRC~)
        2 ～ 163
        2 ～ 168
        8 ～ 20
        -
        -
        10
        1 stycken
        25
        25 ～ 1198
        [Stainless Steel (martensitique)] EN 1.4037 Equiv.
        Induction Hardened
        Hard Chrome Plating
        g6
        Induction Hardening (56HRC~)
        2 ～ 163
        2 ～ 168
        -
        10 ～ 18
        -
        10
        1 stycken
        30
        25 ～ 1498
        [Stainless Steel (martensitique)] EN 1.4037 Equiv.
        Induction Hardened
        Hard Chrome Plating
        g6
        Induction Hardening (56HRC~)
        2 ～ 205
        2 ～ 210
        -
        -
        8 ～ 24
        10
        1 stycken
        30
        25 ～ 1498
        [Stainless Steel (martensitique)] EN 1.4037 Equiv.
        Induction Hardened
        Hard Chrome Plating
        g6
        Induction Hardening (56HRC~)
        2 ～ 205
        2 ～ 210
        8 ～ 25
        -
        -
        10
        1 stycken
        30
        25 ～ 1498
        [Stainless Steel (martensitique)] EN 1.4037 Equiv.
        Induction Hardened
        Hard Chrome Plating
        g6
        Induction Hardening (56HRC~)
        2 ～ 205
        2 ～ 210
        -
        10 ～ 18
        -
        10
        1 stycken
        35
        25 ～ 1498
        [Stainless Steel (martensitique)] EN 1.4037 Equiv.
        Induction Hardened
        Hard Chrome Plating
        g6
        Induction Hardening (56HRC~)
        2 ～ 205
        2 ～ 210
        -
        -
        10 ～ 30
        10
        1 stycken
        35
        25 ～ 1498
        [Stainless Steel (martensitique)] EN 1.4037 Equiv.
        Induction Hardened
        Hard Chrome Plating
        g6
        Induction Hardening (56HRC~)
        2 ～ 205
        2 ～ 210
        10 ～ 25
        -
        -
        10
        1 stycken
        35
        25 ～ 1498
        [Stainless Steel (martensitique)] EN 1.4037 Equiv.
        Induction Hardened
        Hard Chrome Plating
        g6
        Induction Hardening (56HRC~)
        2 ～ 205
        2 ～ 210
        -
        10 ～ 18
        -
        10
        1 stycken
        40
        25 ～ 1498
        [Stainless Steel (martensitique)] EN 1.4037 Equiv.
        Induction Hardened
        Hard Chrome Plating
        g6
        Induction Hardening (56HRC~)
        2 ～ 205
        2 ～ 210
        -
        -
        12 ～ 30
        10
        1 stycken
        40
        25 ～ 1498
        [Stainless Steel (martensitique)] EN 1.4037 Equiv.
        Induction Hardened
        Hard Chrome Plating
        g6
        Induction Hardening (56HRC~)
        2 ～ 205
        2 ～ 210
        12 ～ 30
        -
        -
        10
        1 stycken
        40
        25 ～ 1498
        [Stainless Steel (martensitique)] EN 1.4037 Equiv.
        Induction Hardened
        Hard Chrome Plating
        g6
        Induction Hardening (56HRC~)
        2 ～ 205
        2 ～ 210
        -
        12 ～ 18
        -
        10
        1 stycken
        50
        25 ～ 1498
        [Stainless Steel (martensitique)] EN 1.4037 Equiv.
        Induction Hardened
        Hard Chrome Plating
        g6
        Induction Hardening (56HRC~)
        2 ～ 205
        2 ～ 210
        -
        -
        16 ～ 30
        10
        1 stycken
        50
        25 ～ 1498
        [Stainless Steel (martensitique)] EN 1.4037 Equiv.
        Induction Hardened
        Hard Chrome Plating
        g6
        Induction Hardening (56HRC~)
        2 ～ 205
        2 ～ 210
        15 ～ 30
        -
        -
        10
        1 stycken
        50
        25 ～ 1498
        [Stainless Steel (martensitique)] EN 1.4037 Equiv.
        Induction Hardened
        Hard Chrome Plating
        g6
        Induction Hardening (56HRC~)
        2 ～ 205
        2 ～ 210
        -
        14 ～ 18
        -
        10
        1 stycken
        4
        25 ～ 298
        [Alloyed Steel] EN 1.3505 Equiv.
        Induction Hardened
        LTBC Plating
        g6
        Induction Hardening (58HRC~)
        2 ～ 20
        2 ～ 20
        -
        -
        3
        10
        1 stycken
        4
        25 ～ 298
        [Alloyed Steel] EN 1.3505 Equiv.
        Induction Hardened
        LTBC Plating
        g6
        Induction Hardening (58HRC~)
        2 ～ 20
        2 ～ 20
        3
        -
        -
        10
        1 stycken
        5
        25 ～ 398
        [Alloyed Steel] EN 1.3505 Equiv.
        Induction Hardened
        LTBC Plating
        g6
        Induction Hardening (58HRC~)
        2 ～ 25
        2 ～ 25
        -
        -
        3 ～ 4
        10
        1 stycken
        5
        25 ～ 398
        [Alloyed Steel] EN 1.3505 Equiv.
        Induction Hardened
        LTBC Plating
        g6
        Induction Hardening (58HRC~)
        2 ～ 25
        2 ～ 25
        3 ～ 4
        -
        -
        10
        1 stycken
        6
        25 ～ 500
        [Alloyed Steel] EN 1.3505 Equiv.
        Induction Hardened
        LTBC Plating
        g6
        Induction Hardening (58HRC~)
        2 ～ 30
        2 ～ 30
        -
        -
        3 ～ 5
        10
        1 stycken
        6
        25 ～ 500
        [Alloyed Steel] EN 1.3505 Equiv.
        Induction Hardened
        LTBC Plating
        g6
        Induction Hardening (58HRC~)
        2 ～ 30
        2 ～ 30
        3 ～ 5
        -
        -
        10
        1 stycken
        8
        25 ～ 500
        [Alloyed Steel] EN 1.3505 Equiv.
        Induction Hardened
        LTBC Plating
        g6
        Induction Hardening (58HRC~)
        2 ～ 40
        2 ～ 40
        -
        -
        3 ～ 6
        10
        1 stycken
        8
        25 ～ 500
        [Alloyed Steel] EN 1.3505 Equiv.
        Induction Hardened
        LTBC Plating
        g6
        Induction Hardening (58HRC~)
        2 ～ 40
        2 ～ 40
        3 ～ 6
        -
        -
        10
        1 stycken
        10
        25 ～ 500
        [Alloyed Steel] EN 1.3505 Equiv.
        Induction Hardened
        LTBC Plating
        g6
        Induction Hardening (58HRC~)
        2 ～ 50
        2 ～ 50
        -
        -
        4 ～ 8
        10
        1 stycken
        10
        25 ～ 500
        [Alloyed Steel] EN 1.3505 Equiv.
        Induction Hardened
        LTBC Plating
        g6
        Induction Hardening (58HRC~)
        2 ～ 50
        2 ～ 50
        4 ～ 8
        -
        -
        10
        1 stycken
        10
        25 ～ 500
        [Alloyed Steel] EN 1.3505 Equiv.
        Induction Hardened
        LTBC Plating
        g6
        Induction Hardening (58HRC~)
        2 ～ 50
        2 ～ 50
        -
        10
        -
        10
        1 stycken
        12
        25 ～ 500
        [Alloyed Steel] EN 1.3505 Equiv.
        Induction Hardened
        LTBC Plating
        g6
        Induction Hardening (58HRC~)
        2 ～ 60
        2 ～ 60
        -
        -
        5 ～ 10
        10
        1 stycken
        12
        25 ～ 500
        [Alloyed Steel] EN 1.3505 Equiv.
        Induction Hardened
        LTBC Plating
        g6
        Induction Hardening (58HRC~)
        2 ～ 60
        2 ～ 60
        5 ～ 10
        -
        -
        10
        1 stycken
        12
        25 ～ 500
        [Alloyed Steel] EN 1.3505 Equiv.
        Induction Hardened
        LTBC Plating
        g6
        Induction Hardening (58HRC~)
        2 ～ 60
        2 ～ 60
        -
        10 ～ 12
        -
        10
        1 stycken
        13
        25 ～ 500
        [Alloyed Steel] EN 1.3505 Equiv.
        Induction Hardened
        LTBC Plating
        g6
        Induction Hardening (58HRC~)
        2 ～ 60
        2 ～ 60
        -
        -
        5 ～ 12
        10
        1 stycken
        13
        25 ～ 500
        [Alloyed Steel] EN 1.3505 Equiv.
        Induction Hardened
        LTBC Plating
        g6
        Induction Hardening (58HRC~)
        2 ～ 60
        2 ～ 60
        5 ～ 10
        -
        -
        10
        1 stycken
        13
        25 ～ 500
        [Alloyed Steel] EN 1.3505 Equiv.
        Induction Hardened
        LTBC Plating
        g6
        Induction Hardening (58HRC~)
        2 ～ 60
        2 ～ 60
        -
        10 ～ 12
        -
        10
        1 stycken
        15
        25 ～ 500
        [Alloyed Steel] EN 1.3505 Equiv.
        Induction Hardened
        LTBC Plating
        g6
        Induction Hardening (58HRC~)
        2 ～ 60
        2 ～ 60
        -
        -
        5 ～ 12
        10
        1 stycken
        15
        25 ～ 500
        [Alloyed Steel] EN 1.3505 Equiv.
        Induction Hardened
        LTBC Plating
        g6
        Induction Hardening (58HRC~)
        2 ～ 60
        2 ～ 60
        5 ～ 12
        -
        -
        10
        1 stycken
        15
        25 ～ 500
        [Alloyed Steel] EN 1.3505 Equiv.
        Induction Hardened
        LTBC Plating
        g6
        Induction Hardening (58HRC~)
        2 ～ 60
        2 ～ 60
        -
        10 ～ 14
        -
        10
        1 stycken
        16
        25 ～ 500
        [Alloyed Steel] EN 1.3505 Equiv.
        Induction Hardened
        LTBC Plating
        g6
        Induction Hardening (58HRC~)
        2 ～ 80
        2 ～ 80
        -
        -
        5 ～ 12
        10
        1 stycken
        16
        25 ～ 500
        [Alloyed Steel] EN 1.3505 Equiv.
        Induction Hardened
        LTBC Plating
        g6
        Induction Hardening (58HRC~)
        2 ～ 80
        2 ～ 80
        5 ～ 15
        -
        -
        10
        1 stycken
        16
        25 ～ 500
        [Alloyed Steel] EN 1.3505 Equiv.
        Induction Hardened
        LTBC Plating
        g6
        Induction Hardening (58HRC~)
        2 ～ 80
        2 ～ 80
        -
        10 ～ 14
        -
        10
        1 stycken
        18
        25 ～ 500
        [Alloyed Steel] EN 1.3505 Equiv.
        Induction Hardened
        LTBC Plating
        g6
        Induction Hardening (58HRC~)
        2 ～ 80
        2 ～ 80
        -
        -
        5 ～ 16
        10
        1 stycken
        18
        25 ～ 500
        [Alloyed Steel] EN 1.3505 Equiv.
        Induction Hardened
        LTBC Plating
        g6
        Induction Hardening (58HRC~)
        2 ～ 80
        2 ～ 80
        5 ～ 17
        -
        -
        10
        1 stycken
        18
        25 ～ 500
        [Alloyed Steel] EN 1.3505 Equiv.
        Induction Hardened
        LTBC Plating
        g6
        Induction Hardening (58HRC~)
        2 ～ 80
        2 ～ 80
        -
        10 ～ 18
        -
        10
        1 stycken
        20
        25 ～ 500
        [Alloyed Steel] EN 1.3505 Equiv.
        Induction Hardened
        LTBC Plating
        g6
        Induction Hardening (58HRC~)
        2 ～ 100
        2 ～ 100
        -
        -
        6 ～ 16
        10
        1 stycken
        20
        25 ～ 500
        [Alloyed Steel] EN 1.3505 Equiv.
        Induction Hardened
        LTBC Plating
        g6
        Induction Hardening (58HRC~)
        2 ～ 100
        2 ～ 100
        6 ～ 17
        -
        -
        10
        1 stycken
        20
        25 ～ 500
        [Alloyed Steel] EN 1.3505 Equiv.
        Induction Hardened
        LTBC Plating
        g6
        Induction Hardening (58HRC~)
        2 ～ 100
        2 ～ 100
        -
        10 ～ 18
        -
        10
        1 stycken
        Enhetspris (exklusive MOMS)(Enhetspris inklusive MOMS)
        Standardavsändningsdatum
        -
        ( - )
        4 arbetsdagar
        -
        ( - )
        4 arbetsdagar
        -
        ( - )
        4 arbetsdagar
        -
        ( - )
        4 arbetsdagar
        -
        ( - )
        4 arbetsdagar
        -
        ( - )
        4 arbetsdagar
        -
        ( - )
        4 arbetsdagar
        -
        ( - )
        4 arbetsdagar
        -
        ( - )
        4 arbetsdagar
        -
        ( - )
        4 arbetsdagar
        -
        ( - )
        7 arbetsdagar
        -
        ( - )
        7 arbetsdagar
        -
        ( - )
        7 arbetsdagar
        -
        ( - )
        4 arbetsdagar
        -
        ( - )
        4 arbetsdagar
        -
        ( - )
        4 arbetsdagar
        -
        ( - )
        4 arbetsdagar
        -
        ( - )
        4 arbetsdagar
        -
        ( - )
        4 arbetsdagar
        -
        ( - )
        4 arbetsdagar
        -
        ( - )
        4 arbetsdagar
        -
        ( - )
        4 arbetsdagar
        -
        ( - )
        7 arbetsdagar
        -
        ( - )
        7 arbetsdagar
        -
        ( - )
        7 arbetsdagar
        -
        ( - )
        7 arbetsdagar
        -
        ( - )
        7 arbetsdagar
        -
        ( - )
        7 arbetsdagar
        -
        ( - )
        7 arbetsdagar
        -
        ( - )
        7 arbetsdagar
        -
        ( - )
        7 arbetsdagar
        -
        ( - )
        12 arbetsdagar
        -
        ( - )
        12 arbetsdagar
        -
        ( - )
        12 arbetsdagar
        -
        ( - )
        12 arbetsdagar
        -
        ( - )
        12 arbetsdagar
        -
        ( - )
        12 arbetsdagar
        -
        ( - )
        12 arbetsdagar
        -
        ( - )
        12 arbetsdagar
        -
        ( - )
        12 arbetsdagar
        -
        ( - )
        12 arbetsdagar
        -
        ( - )
        12 arbetsdagar
        -
        ( - )
        12 arbetsdagar
        -
        ( - )
        12 arbetsdagar
        -
        ( - )
        12 arbetsdagar
        -
        ( - )
        12 arbetsdagar
        -
        ( - )
        12 arbetsdagar
        -
        ( - )
        12 arbetsdagar
        -
        ( - )
        12 arbetsdagar
        -
        ( - )
        12 arbetsdagar
        -
        ( - )
        12 arbetsdagar
        -
        ( - )
        12 arbetsdagar
        -
        ( - )
        12 arbetsdagar
        -
        ( - )
        12 arbetsdagar
        -
        ( - )
        12 arbetsdagar
        -
        ( - )
        12 arbetsdagar
        -
        ( - )
        12 arbetsdagar
        -
        ( - )
        12 arbetsdagar
        -
        ( - )
        12 arbetsdagar
        -
        ( - )
        12 arbetsdagar
      • Föregående
      • 1
      • 2
      • 3
      • 4
      • Nästa

        • Detaljerad information

        Grundläggande information

        Försiktighet

        • SFAN has been localized according to European needs and requirements. Please have a look on the EU version SFANEU. SFANEU is available in EN 1.1213 (Cf53) and h6 / h7.
        Teknisk information

        Skiss och specifikationer

        Back to Linear Shaft Category

        Technical Drawing - Linear Shafts

         

        One End Threaded:Related Image

         

        Specification Tables - Linear Shafts

         

        Overview of the shaft designs as PDF

         

        Coarse Thread Dimension
        Mpitch
        30.5
        40.7
        50.8
        61.0
        81.25
        101.5
        121.75
        162.0
        202.5
        243.0
        303.5

         

        Alterations - Linear Shafts


        One End Threaded:Related Image

        You find further options in detail under Option Overview.