Han Waterproof Connector Crimper
● A special tool for crimping E contacts and D contacts. Each series can be commonly used.
· Use the B model crimping tool as shown in the picture on the right when crimping a fat wire with a conducting cross-sectional area of 1.5 mm2.
· A locator is necessary to carry out crimping with the B model tool. Select one that matches the contact. (Included with the A model).
· For B model tools, use a gauge pin and regularly adjust the crimping depth.
· 0999-000-0310 (0.14 – 4.0 mm2)
· 0999-000-0311 (0.14 – 2.5 mm2)
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
0999-000-0110H
Specifications
| Model | Content | Weight (g) |
| 0999-000-0110H | A type crimping tool (0.5 to 4.0 mm2) | 640.0 |
| 0999-000-0001 | B type crimping tool (0.14 to 4.0 mm2) | 702.3 |
| 0999-000-0310 | B type locator (for E contact) | 3.7 |
| 0999-000-0311 | B type locator (for D contact) | 3.7 |
| 0999-000-0379 | Gauge pin for B type (0.14 to 4.0 mm2) | 27.0 |
Basic information
| Applicable Type | Han Waterproof Connector | Core Wire Cross-sectional Area(mm2) | 0.14 ~ 1.5 | Product Classification | Type-A Crimping Tool |
|---|
This page is Han Waterproof Connector Crimper, part number 0999-000-0110H.
You can find the detail information about specifications and dimensions on part number 0999-000-0110H.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Betalningsmetod
Faktura
Förskottsbetalning
Behovsstyrd tillverkning
Certifikat
Copyright © MISUMI Corporation All Rights Reserved.