Registrera dig

Vi håller på att översätta vår butik till svenska! 

Men eftersom vi har många produkter och sidor tar det tid. Under tiden finns vår produktkatalog på engelska. Tack för ditt tålamod!

Filtreringsvillkor
8%
MISUMI

TSC series carbide long neck radius end mill, 2-flute, 45° spiral / long neck model

TSC series carbide long neck radius end mill, 2-flute, 45° spiral / long neck model

För musen över bilden för att förstora

  • TSC-CR-HEM3LB
  • LN-TSC-CR-HEM3S

Artikelnummer:

Ej färdigt: 40 kandidater hittades.
Antal:

Skiss

TSC series carbide long neck radius end mill, 2-flute, 45° spiral / long neck model:Related Image

Artikelnummerlista

Antal artiklar
  • 1
    • Artikelnummer
    LN-TSC-CR-HEM3S3-R0.3-[13-36/1]
    LN-TSC-CR-HEM3S3-R0.5-[13-36/1]
    LN-TSC-CR-HEM3S4-R0.3-[16-38/1]
    LN-TSC-CR-HEM3S4-R0.5-[16-38/1]
    TSC-CR-HEM3LB1-6-R0.2
    TSC-CR-HEM3LB1-6-R0.3
    TSC-CR-HEM3LB1-8-R0.2
    TSC-CR-HEM3LB1-8-R0.3
    TSC-CR-HEM3LB1-12-R0.2
    TSC-CR-HEM3LB1.5-6-R0.2
    TSC-CR-HEM3LB1.5-6-R0.3
    TSC-CR-HEM3LB1.5-8-R0.2
    TSC-CR-HEM3LB1.5-8-R0.3
    TSC-CR-HEM3LB1.5-12-R0.2
    TSC-CR-HEM3LB2-10-R0.2
    TSC-CR-HEM3LB2-10-R0.5
    TSC-CR-HEM3LB2-12-R0.2
    TSC-CR-HEM3LB2-14-R0.2
    TSC-CR-HEM3LB2-14-R0.5
    TSC-CR-HEM3LB2-16-R0.2
    TSC-CR-HEM3LB2-20-R0.2
    TSC-CR-HEM3LB2.5-16-R0.2
    TSC-CR-HEM3LB2.5-16-R0.5
    TSC-CR-HEM3LB2.5-30-R0.2
    TSC-CR-HEM3LB2.5-30-R0.5
    TSC-CR-HEM3LB3-16-R0.2
    TSC-CR-HEM3LB3-16-R0.5
    TSC-CR-HEM3LB3-20-R0.2
    TSC-CR-HEM3LB3-20-R0.5
    TSC-CR-HEM3LB3-20-R1
    TSC-CR-HEM3LB3-30-R0.2
    TSC-CR-HEM3LB3-30-R0.5
    TSC-CR-HEM3LB4-16-R0.2
    TSC-CR-HEM3LB4-16-R1
    TSC-CR-HEM3LB4-20-R0.2
    TSC-CR-HEM3LB4-20-R0.5
    TSC-CR-HEM3LB4-20-R1
    TSC-CR-HEM3LB4-30-R0.2
    TSC-CR-HEM3LB4-30-R0.5
    TSC-CR-HEM3LB4-30-R1

    Outer Diameter (D)

    (φ)

    R Size

    (mm)

    Work Material

    Flute Length (ℓ)

    (mm)

    Number of Flutes

    (sheet)

    Overall Length (L)

    (mm)

    Shank Diameter (d)

    (mm)

    Length Under Neck (ℓ1)

    (mm)

    Processing Applications

    R Precision

    (μm)

    Additional Classification

    #6

    Figure

    Under Neck Diameter d1

    (mm)

    Actual Effective Length Depends on Work Inclination Angle 30'

    (mm)

    Actual Effective Length Depends on Work Inclination Angle 1°

    (mm)

    Actual Effective Length Depends on Work Inclination Angle 2°

    (mm)

    Actual Effective Length Depends on Work Inclination Angle 3°

    (mm)

    		Minsta beställningsantal
    3
    0.3
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel - HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    2.4
    3
    45
    6
    -
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.01
    Manufactured Product
    13 - 36
    2
    2.9
    -
    -
    -
    -
    1 stycken
    3
    0.5
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel - HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    2.4
    3
    70
    6
    -
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.01
    Manufactured Product
    13 - 36
    2
    2.9
    -
    -
    -
    -
    1 stycken
    4
    0.3
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel - HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    3.2
    4
    70
    6
    -
    Flat Surface / Side Surface / Curved Surface / Inclined Cutting
    ±0.01
    Manufactured Product
    16 - 38
    2
    3.8
    -
    -
    -
    -
    1 stycken
    4
    0.5
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel - HRC55[○] / High-Hardness Steel - HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    3.2
    4
    70
    6
    -
    Flat Surface / Side Surface / Curved Surface / Inclined Cutting
    ±0.01
    Manufactured Product
    16 - 38
    2
    3.8
    -
    -
    -
    -
    1 stycken
    1
    0.2
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel - HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    0.8
    3
    50
    4
    6
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    0.95
    6.28
    6.59
    7.32
    8.24
    1 stycken
    1
    0.3
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel - HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    0.8
    3
    50
    4
    6
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    0.95
    6.28
    6.59
    7.32
    8.24
    1 stycken
    1
    0.2
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel - HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    0.8
    3
    50
    4
    8
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    0.95
    8.38
    8.79
    9.76
    10.98
    1 stycken
    1
    0.3
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel - HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    0.8
    3
    50
    4
    8
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    0.95
    8.38
    8.79
    9.76
    10.98
    1 stycken
    1
    0.2
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel - HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    0.8
    3
    50
    4
    12
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    0.95
    12.57
    13.19
    14.65
    16.48
    1 stycken
    1.5
    0.2
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel - HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    1.2
    3
    50
    4
    6
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    1.45
    6.28
    6.59
    7.32
    8.24
    1 stycken
    1.5
    0.3
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel - HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    1.2
    3
    50
    4
    6
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    1.45
    6.28
    6.59
    7.32
    8.24
    1 stycken
    1.5
    0.2
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel - HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    1.2
    3
    50
    4
    8
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    1.45
    8.38
    8.79
    9.76
    10.98
    1 stycken
    1.5
    0.3
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel - HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    1.2
    3
    50
    4
    8
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    1.45
    8.38
    8.79
    9.76
    10.98
    1 stycken
    1.5
    0.2
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel - HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    1.2
    3
    50
    4
    12
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    1.45
    12.57
    13.19
    14.65
    16.48
    1 stycken
    2
    0.2
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel - HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    1.6
    3
    50
    4
    10
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    1.95
    10.47
    10.99
    12.21
    13.73
    1 stycken
    2
    0.5
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel - HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    1.6
    3
    50
    4
    10
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    1.95
    10.47
    10.99
    12.21
    13.73
    1 stycken
    2
    0.2
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel - HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    1.6
    3
    50
    4
    12
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    1.95
    12.57
    13.19
    14.65
    16.48
    1 stycken
    2
    0.2
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel - HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    1.6
    3
    50
    4
    14
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    1.95
    14.66
    15.39
    17.09
    19.22
    1 stycken
    2
    0.5
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel - HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    1.6
    3
    50
    4
    14
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    1.95
    14.66
    15.39
    17.09
    19.22
    1 stycken
    2
    0.2
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel - HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    1.6
    3
    50
    4
    16
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    1.95
    16.75
    17.58
    19.53
    Without Interference
    1 stycken
    2
    0.2
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel - HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    1.6
    3
    70
    4
    20
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    1.95
    20.94
    21.98
    24.41
    Without Interference
    1 stycken
    2.5
    0.2
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel - HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    2
    3
    70
    4
    16
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    2.4
    16.75
    17.58
    19.53
    Without Interference
    1 stycken
    2.5
    0.5
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel - HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    2
    3
    70
    4
    16
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    2.4
    16.75
    17.58
    19.53
    Without Interference
    1 stycken
    2.5
    0.2
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel - HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    2
    3
    70
    4
    30
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    2.4
    31.41
    32.97
    Without Interference
    Without Interference
    1 stycken
    2.5
    0.5
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel - HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    2
    3
    70
    4
    30
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    2.4
    31.41
    32.97
    Without Interference
    Without Interference
    1 stycken
    3
    0.2
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel - HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    2.4
    3
    70
    6
    16
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    2.9
    16.75
    17.58
    19.53
    21.97
    1 stycken
    3
    0.5
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel - HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    2.4
    3
    70
    6
    16
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    2.9
    16.75
    17.58
    19.53
    21.97
    1 stycken
    3
    0.2
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel - HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    2.4
    3
    70
    6
    20
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    2.9
    20.94
    21.98
    24.41
    27.46
    1 stycken
    3
    0.5
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel - HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    2.4
    3
    70
    6
    20
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    2.9
    20.94
    21.98
    24.41
    27.46
    1 stycken
    3
    1
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel - HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    2.4
    3
    70
    6
    20
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    2.9
    20.94
    21.98
    24.41
    27.46
    1 stycken
    3
    0.2
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel - HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    2.4
    3
    70
    6
    30
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    2.9
    31.41
    32.97
    36.62
    Without Interference
    1 stycken
    3
    0.5
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel - HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    2.4
    3
    70
    6
    30
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    2.9
    31.41
    32.97
    36.62
    Without Interference
    1 stycken
    4
    0.2
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel - HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    3.2
    3
    70
    6
    16
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    3.8
    16.75
    17.58
    19.53
    Without Interference
    1 stycken
    4
    1
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel - HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    3.2
    3
    70
    6
    16
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    3.8
    16.75
    17.58
    19.53
    Without Interference
    1 stycken
    4
    0.2
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel - HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    3.2
    3
    70
    6
    20
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    3.8
    20.94
    21.98
    24.41
    Without Interference
    1 stycken
    4
    0.5
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel - HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    3.2
    3
    70
    6
    20
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    3.8
    20.94
    21.98
    24.41
    Without Interference
    1 stycken
    4
    1
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel - HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    3.2
    3
    70
    6
    20
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    3.8
    20.94
    21.98
    24.41
    Without Interference
    1 stycken
    4
    0.2
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel - HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    3.2
    3
    70
    6
    30
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    3.8
    31.41
    32.97
    Without Interference
    Without Interference
    1 stycken
    4
    0.5
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel - HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    3.2
    3
    70
    6
    30
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    3.8
    31.41
    32.97
    Without Interference
    Without Interference
    1 stycken
    4
    1
    General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel - HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum Alloy[○] / Copper Alloy[○]
    3.2
    3
    70
    6
    30
    Flat Surface / Side Surface / Curved Surface / Groove / Inclined Cutting
    ±0.005
    Stocked Product
    -
    1
    3.8
    31.41
    32.97
    Without Interference
    Without Interference
    1 stycken
    Enhetspris (exklusive MOMS)(Enhetspris inklusive MOMS)
    Standardavsändningsdatum
    -
    (
    -
    )
    8 arbetsdagar
    -
    (
    -
    )
    8 arbetsdagar
    -
    (
    -
    )
    8 arbetsdagar
    -
    (
    -
    )
    8 arbetsdagar
    60.76 €
    (
    72.30 €
     )
    5 arbetsdagar
    80.02 €
    (
    95.22 €
     )
    5 arbetsdagar
    80.02 €
    (
    95.22 €
     )
    5 arbetsdagar
    60.76 €
    (
    72.30 €
     )
    5 arbetsdagar
    80.02 €
    (
    95.22 €
     )
    5 arbetsdagar
    77.65 €
    (
    92.40 €
     )
    5 arbetsdagar
    82.65 €
    (
    98.35 €
     )
    5 arbetsdagar
    77.65 €
    (
    92.40 €
     )
    5 arbetsdagar
    82.65 €
    (
    98.35 €
     )
    5 arbetsdagar
    82.65 €
    (
    98.35 €
     )
    5 arbetsdagar
    78.87 €
    (
    93.86 €
     )
    5 arbetsdagar
    85.59 €
    (
    101.85 €
     )
    5 arbetsdagar
    85.59 €
    (
    101.85 €
     )
    5 arbetsdagar
    88.15 €
    (
    104.90 €
     )
    5 arbetsdagar
    88.15 €
    (
    104.90 €
     )
    5 arbetsdagar
    85.59 €
    (
    101.85 €
     )
    5 arbetsdagar
    85.59 €
    (
    101.85 €
     )
    5 arbetsdagar
    80.79 €
    (
    96.14 €
     )
    5 arbetsdagar
    64.60 €
    (
    76.87 €
     )
    5 arbetsdagar
    70.51 €
    (
    83.91 €
     )
    5 arbetsdagar
    88.68 €
    (
    105.53 €
     )
    5 arbetsdagar
    77.16 €
    (
    91.82 €
     )
    5 arbetsdagar
    66.17 €
    (
    78.74 €
     )
    5 arbetsdagar
    87.97 €
    (
    104.68 €
     )
    5 arbetsdagar
    85.56 €
    (
    101.82 €
     )
    5 arbetsdagar
    87.28 €
    (
    103.86 €
     )
    5 arbetsdagar
    87.00 €
    (
    103.53 €
     )
    5 arbetsdagar
    87.00 €
    (
    103.53 €
     )
    5 arbetsdagar
    95.49 €
    (
    113.63 €
     )
    5 arbetsdagar
    99.44 €
    (
    118.33 €
     )
    5 arbetsdagar
    95.49 €
    (
    113.63 €
     )
    5 arbetsdagar
    95.49 €
    (
    113.63 €
     )
    5 arbetsdagar
    99.44 €
    (
    118.33 €
     )
    5 arbetsdagar
    94.71 €
    (
    112.70 €
     )
    5 arbetsdagar
    113.32 €
    (
    134.85 €
     )
    5 arbetsdagar
    104.43 €
    (
    124.27 €
     )
    5 arbetsdagar
  • 1

    • Detaljerad information

    Grundläggande information

    [Features]
    -Multi-functional long neck radius with high feed rate and excellent durability
    -It has a coating with high oxidation resistance and high hardness, and achieves long service life. Effective in high-speed machining and dry machining as coating properties
    -Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.

    Specifikationer och pris

    Specifications

    TSC series carbide long neck radius end mill, 2-flute, 45° spiral / long neck model:Related Image

     Model Number
    TSC-CR-HEM3LB (Stocked Product) / LN-TSC-CR-HEM3S (Manufactured Product)

    Outer Diameter
    D    		 Length Under Neck ℓ1
    (Manufactured products designated
    in 1 mm increment)    		 Radius
    R    		 Flute Length
    ℓ    		 Under Neck Diameter
    d1    		 Overall Length
    L    		 Shank Diameter
    d    		 Actual Effective Length Depends on Work Inclination Angle Figure ● Stocked Product
    □ Manufactured Product
    30' 1° 2° 3°
    1 6 0.2 0.3 0.8 0.95 50 4 6.28 6.59 7.32 8.24 1 ●
    8 8.38 8.79 9.76 10.98 ●
    12 12.57 13.19 14.65 16.48 ●
    1.5 6 0.2 0.3 1.2 1.45 50 4 6.28 6.59 7.32 8.24 1 ●
    8 8.38 8.79 9.76 10.98 ●
    12 12.57 13.19 14.65 16.48 ●
    2 10 0.2 0.5 1.6 1.95 50 4 10.47 10.99 12.21 13.73 1 ●
    12 12.57 13.19 14.65 16.48 ●
    14 14.66 15.39 17.09 19.22 ●
    16 16.75 17.58 19.53 Without Interference ●
    20 70 20.94 21.98 24.41 Without Interference ●
    2.5 16 0.2 0.5 2 2.4 70 4 16.75 17.58 19.53 Without Interference 1 ●
    20 20.94 21.98 Without Interference Without Interference ●
    30 31.41 32.97 Without Interference Without Interference ●
    3 16 0.2 0.5 1 2.4 2.9 70 6 16.75 17.58 19.53 21.97 1 ●
    20 20.94 21.98 24.41 27.46 ●
    30 31.41 32.97 36.62 Without Interference ●
    13 ~ 36 0.3 0.5 8 60 - - - - 2 □
    4 16 0.2 0.5 1 3.2 3.8 70 6 16.75 17.58 19.53 Without Interference 1 ●
    20 20.94 21.98 24.41 Without Interference ●
    30 31.41 32.97 Without Interference Without Interference ●
    16 ~ 38 0.3 0.5 11 60 - - - - 2 □

    [ ! ]When ordering manufactured products, be sure to confirm the ordering examples as the points below differ when ordering a stocked product.
    (1) "LN-" is prepended to the start of the model number. (2) "S" is appended to the end of the model number. (3) The order for specifying the "length under neck" and "radius" is the opposite.

    For Cutting Conditions, Refer to >>Click here.

    Funktioner och användningsexempel

    More Information

    TSC series carbide long neck radius end mill, 2-flute, 45° spiral / long neck model:Related Image