Filtreringsvillkor
- Single Angle (θ)(Degree)
- 0.5
- 1
- 2
- 3
- 5
- 6
- 7
- 10
- 12
- 15
- 20
- 30
- Outer Diameter (D)(φ)
- 0.5
- 1
- 1.5
- 2
- 3
- 4
- 5
- 6
- Flute Length (ℓ)(mm)
- 2
- 2.6
- 3
- 3.9
- 4
- 5
- 5.5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 14
- 16
- 20
- 24
- Shank Diameter (d)(mm)
- 4
- 6
- 8
- 10
- 12
- Overall Length (L)(mm)
- 50
- 60
- 70
- Type
- Uppskattade leveransdagar
- Alla
- Inom 5 arbetsdagar
TSC series carbide tapered end mill, 2-flute / regular model
Artikelnummer:
kandidater hittades.Skiss
Artikelnummerlista
| Artikelnummer |
|---|
Enhetspris (exklusive MOMS)(Enhetspris inklusive MOMS) | Standardavsändningsdatum |
|---|
87.53 € ( 104.16 € ) | 5 arbetsdagar |
70.56 € ( 83.97 € ) | 5 arbetsdagar |
53.62 € ( 63.81 € ) | 5 arbetsdagar |
79.86 € ( 95.03 € ) | 5 arbetsdagar |
94.73 € ( 112.73 € ) | 5 arbetsdagar |
132.24 € ( 157.37 € ) | 5 arbetsdagar |
52.26 € ( 62.19 € ) | 5 arbetsdagar |
54.74 € ( 65.14 € ) | 5 arbetsdagar |
53.62 € ( 63.81 € ) | 5 arbetsdagar |
64.69 € ( 76.98 € ) | 5 arbetsdagar |
100.81 € ( 119.96 € ) | 5 arbetsdagar |
84.07 € ( 100.04 € ) | 5 arbetsdagar |
94.73 € ( 112.73 € ) | 5 arbetsdagar |
135.29 € ( 161.00 € ) | 5 arbetsdagar |
126.95 € ( 151.07 € ) | 5 arbetsdagar |
139.96 € ( 166.55 € ) | 5 arbetsdagar |
133.37 € ( 158.71 € ) | 5 arbetsdagar |
54.29 € ( 64.61 € ) | 5 arbetsdagar |
62.20 € ( 74.02 € ) | 5 arbetsdagar |
53.62 € ( 63.81 € ) | 5 arbetsdagar |
64.69 € ( 76.98 € ) | 5 arbetsdagar |
108.55 € ( 129.17 € ) | 5 arbetsdagar |
84.07 € ( 100.04 € ) | 5 arbetsdagar |
92.47 € ( 110.04 € ) | 5 arbetsdagar |
127.04 € ( 151.18 € ) | 5 arbetsdagar |
169.51 € ( 201.72 € ) | 5 arbetsdagar |
125.80 € ( 149.70 € ) | 5 arbetsdagar |
137.88 € ( 164.08 € ) | 5 arbetsdagar |
52.26 € ( 62.19 € ) | 5 arbetsdagar |
52.26 € ( 62.19 € ) | 5 arbetsdagar |
50.71 € ( 60.34 € ) | 5 arbetsdagar |
53.12 € ( 63.21 € ) | 5 arbetsdagar |
56.24 € ( 66.93 € ) | 5 arbetsdagar |
92.24 € ( 109.77 € ) | 5 arbetsdagar |
60.71 € ( 72.24 € ) | 5 arbetsdagar |
98.80 € ( 117.57 € ) | 5 arbetsdagar |
142.86 € ( 170.00 € ) | 5 arbetsdagar |
109.12 € ( 129.85 € ) | 5 arbetsdagar |
108.84 € ( 129.52 € ) | 5 arbetsdagar |
110.30 € ( 131.26 € ) | 5 arbetsdagar |
59.65 € ( 70.98 € ) | 5 arbetsdagar |
54.97 € ( 65.41 € ) | 5 arbetsdagar |
70.49 € ( 83.88 € ) | 5 arbetsdagar |
56.17 € ( 66.84 € ) | 5 arbetsdagar |
60.65 € ( 72.17 € ) | 5 arbetsdagar |
94.97 € ( 113.01 € ) | 5 arbetsdagar |
69.52 € ( 82.73 € ) | 5 arbetsdagar |
149.10 € ( 177.43 € ) | 5 arbetsdagar |
131.66 € ( 156.68 € ) | 5 arbetsdagar |
169.21 € ( 201.36 € ) | 5 arbetsdagar |
123.39 € ( 146.83 € ) | 5 arbetsdagar |
115.50 € ( 137.44 € ) | 5 arbetsdagar |
57.69 € ( 68.65 € ) | 5 arbetsdagar |
56.90 € ( 67.71 € ) | 5 arbetsdagar |
56.90 € ( 67.71 € ) | 5 arbetsdagar |
64.20 € ( 76.40 € ) | 5 arbetsdagar |
74.74 € ( 88.94 € ) | 5 arbetsdagar |
105.70 € ( 125.78 € ) | 5 arbetsdagar |
84.02 € ( 99.98 € ) | 5 arbetsdagar |
178.92 € ( 212.91 € ) | 5 arbetsdagar |
Detaljerad information
Grundläggande information
[Features]
As the cutting edge has been machined into a sharp corner, it is also possible to machine corner edges
-The coating has high oxidation resistance and high hardness and achieves long life. Effective in high-speed machining and dry machining as coating properties
-Can be reground. Please refer to the "Regrinding Service" page for application procedures, range of services, prices, etc.
Specifikationer och pris
Specifications
| Model Number | Flute Length ℓ |
Large Tip Diameter D1 |
Overall Length L |
Shank Diameter d |
||
| Outer Diameter D |
Single Angle θ |
|||||
| TSC-TEM2R | 0.5 | 1° | 2 | 0.57 | 50 | 4 |
| 2° | 2 | 0.64 | 50 | 4 | ||
| 3° | 2 | 0.71 | 50 | 4 | ||
| 5° | 2 | 0.85 | 50 | 4 | ||
| 10° | 2 | 1.21 | 50 | 4 | ||
| 15° | 2 | 1.57 | 50 | 4 | ||
| 1 | 1° | 4 | 1.14 | 50 | 4 | |
| 2° | 4 | 1.28 | 50 | 4 | ||
| 3° | 4 | 1.42 | 50 | 4 | ||
| 5° | 4 | 1.70 | 50 | 4 | ||
| 6° | 4 | 1.84 | 50 | 4 | ||
| 7° | 4 | 1.98 | 50 | 4 | ||
| 10° | 4 | 2.41 | 50 | 4 | ||
| 12° | 4 | 2.70 | 50 | 4 | ||
| 15° | 3 | 2.60 | 50 | 4 | ||
| 20° | 3 | 3.18 | 50 | 4 | ||
| 30° | 2.6 | 4.00 | 50 | 4 | ||
| 1.5 | 1° | 6 | 1.71 | 50 | 4 | |
| 2° | 6 | 1.92 | 50 | 4 | ||
| 3° | 6 | 2.13 | 50 | 4 | ||
| 5° | 6 | 2.55 | 50 | 4 | ||
| 6° | 6 | 2.76 | 50 | 4 | ||
| 7° | 6 | 2.97 | 50 | 4 | ||
| 10° | 6 | 3.62 | 50 | 4 | ||
| 12° | 6 | 4.05 | 50 | 4 | ||
| 15° | 5 | 4.18 | 50 | 4 | ||
| 20° | 5 | 5.14 | 50 | 6 | ||
| 30° | 3.9 | 6.00 | 50 | 6 | ||
| 2 | 0.5° | 8 | 2.14 | 50 | 4 | |
| 1° | 8 | 2.28 | 50 | 4 | ||
| 2° | 8 | 2.56 | 50 | 4 | ||
| 3° | 8 | 2.84 | 50 | 4 | ||
| 5° | 8 | 3.40 | 50 | 4 | ||
| 6° | 8 | 3.68 | 50 | 4 | ||
| 7° | 8 | 3.96 | 50 | 4 | ||
| 10° | 8 | 4.82 | 50 | 6 | ||
| 12° | 8 | 5.40 | 50 | 6 | ||
| 15° | 7 | 5.75 | 50 | 6 | ||
| 20° | 5.5 | 6.00 | 50 | 6 | ||
| 30° | 4 | 6.62 | 50 | 6 |
| Model Number | Flute Length ℓ |
Large Tip Diameter D1 |
Overall Length L |
Shank Diameter d |
||
| Outer Diameter D |
Single Angle θ |
|||||
| TSC-TEM2R | 3 | 0.5° | 12 | 3.21 | 60 | 4 |
| 1° | 12 | 3.42 | 60 | 4 | ||
| 2° | 12 | 3.84 | 60 | 4 | ||
| 3° | 12 | 4.26 | 60 | 4 | ||
| 5° | 12 | 5.10 | 60 | 6 | ||
| 6° | 12 | 5.52 | 60 | 6 | ||
| 7° | 12 | 5.95 | 60 | 6 | ||
| 10° | 12 | 7.23 | 60 | 8 | ||
| 12° | 11 | 7.68 | 60 | 8 | ||
| 15° | 11 | 8.89 | 60 | 10 | ||
| 20° | 9 | 9.55 | 60 | 10 | ||
| 30° | 5 | 8.77 | 60 | 10 | ||
| 4 | 0.5° | 16 | 4.28 | 60 | 4 | |
| 1° | 16 | 4.56 | 60 | 6 | ||
| 2° | 16 | 5.12 | 60 | 6 | ||
| 3° | 16 | 5.68 | 60 | 6 | ||
| 5° | 16 | 6.80 | 60 | 6 | ||
| 6° | 16 | 7.36 | 60 | 8 | ||
| 7° | 16 | 7.93 | 60 | 8 | ||
| 10° | 16 | 9.64 | 60 | 10 | ||
| 15° | 14 | 11.50 | 60 | 12 | ||
| 20° | 10 | 11.28 | 60 | 12 | ||
| 30° | 6 | 10.93 | 60 | 12 | ||
| 5 | 0.5° | 20 | 5.35 | 60 | 6 | |
| 1° | 20 | 5.70 | 60 | 6 | ||
| 2° | 20 | 6.40 | 60 | 6 | ||
| 3° | 20 | 7.10 | 60 | 8 | ||
| 5° | 20 | 8.50 | 60 | 8 | ||
| 6 | 0.5° | 24 | 6.42 | 70 | 6 | |
| 1° | 24 | 6.84 | 70 | 8 | ||
| 2° | 24 | 7.68 | 70 | 8 | ||
| 3° | 24 | 8.52 | 70 | 8 | ||
| 5° | 24 | 10.20 | 70 | 10 |
For Cutting Conditions, Refer to >>Click here.
Funktioner och användningsexempel
More Information
● It has a TS film-coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and is ideal for high speed machining / dry machining.
● The blade tip has a sharp edge allowing corner edges to also be machined.