Carbide Straight Edge Square End Mill, 2-flute / Neck Relief Type
Click on this image to zoom in.
Click on this image to zoom in.
-Quadrangular neck relief that supports efficient machining
-Specifying the modification makes it possible to select a coating suitable for the work material
-Can be reground. Please refer to the "Regrinding Service" page for information on procedures, scope of services, prices, etc.
Part Number
Once your search is narrowed to one product,
the corresponding part number is displayed here.
| Part Number | Minimum order quantity | Volume Discount | Shank Diameter d (mm) | Overall Length L (mm) | Processing Applications | #2 | #3 | #4 | #5 | F | T | Use | Below Neck Length Specified Range ℓ2 (mm) | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 1 | 7 Days | 4 | 50 | Boss Hole Drilling | 3.01 ～ 4 | 3 ～ 10 | 5 ～ 12 | - | F | T | For Boss Hole Drilling | ℓ + ℓ1 ≤ 15 | ||
| 1 | 7 Days | 6 | 60 | Boss Hole Drilling | 3.01 ～ 6 | 3 ～ 19 | 5 ～ 20 | - | F | T | For Boss Hole Drilling | ℓ + ℓ1 ≤ 24 | ||
| 1 | 7 Days | 8 | 60 | Boss Hole Drilling | 4.01 ～ 8 | 3 ～ 23 | 5 ～ 20 | - | F | T | For Boss Hole Drilling | ℓ + ℓ1 ≤ 28 | ||
| 1 | 7 Days | 10 | 80 | Boss Hole Drilling | 6.01 ～ 10 | 3 ～ 30 | 5 ～ 20 | - | F | T | For Boss Hole Drilling | ℓ + ℓ1 ≤ 35 | ||
| 1 | 7 Days | 12 | 80 | Boss Hole Drilling | 8.01 ～ 12 | 3 ～ 31 | 5 ～ 20 | - | F | T | For Boss Hole Drilling | ℓ + ℓ1 ≤ 36 | ||
| 1 | 7 Days | 16 | 100 | Boss Hole Drilling | 10.01 ～ 16 | 3 ～ 43 | 5 ～ 20 | - | F | T | For Boss Hole Drilling | ℓ + ℓ1 ≤ 48 | ||
| 1 | 8 Days | 4 | 80 | Boss Hole Drilling | - | 3.01 ～ 4 | 3 ～ 10 | 5 ～ 12 | F | T | For Boss Hole Drilling | ℓ + ℓ1 ≤ 15 | ||
| 1 | 7 Days | 6 | 90 | Boss Hole Drilling | - | 3.01 ～ 6 | 3 ～ 19 | 5 ～ 20 | F | T | For Boss Hole Drilling | ℓ + ℓ1 ≤ 24 | ||
| 1 | 7 Days | 8 | 90 | Boss Hole Drilling | - | 4.01 ～ 8 | 3 ～ 23 | 5 ～ 20 | F | T | For Boss Hole Drilling | ℓ + ℓ1 ≤ 28 | ||
| 1 | 7 Days | 10 | 120 | Boss Hole Drilling | - | 6.01 ～ 10 | 3 ～ 30 | 5 ～ 20 | F | T | For Boss Hole Drilling | ℓ + ℓ1 ≤ 35 | ||
| 1 | 7 Days | 12 | 120 | Boss Hole Drilling | - | 8.01 ～ 12 | 3 ～ 31 | 5 ～ 20 | F | T | For Boss Hole Drilling | ℓ + ℓ1 ≤ 36 | ||
| 1 | 7 Days | 4 | 80 | Flank / Groove Processing | - | 3.01 ～ 4 | 3 ～ 10 | 5 ～ 12 | F | T | For Radial Groove Milling | ℓ + ℓ1 ≤ 15 | ||
| 1 | 7 Days | 6 | 90 | Flank / Groove Processing | - | 3.01 ～ 6 | 3 ～ 19 | 5 ～ 20 | F | T | For Radial Groove Milling | ℓ + ℓ1 ≤ 24 | ||
| 1 | 7 Days | 8 | 90 | Flank / Groove Processing | - | 4.01 ～ 8 | 3 ～ 23 | 5 ～ 20 | F | T | For Radial Groove Milling | ℓ + ℓ1 ≤ 28 | ||
| 1 | 7 Days | 10 | 120 | Flank / Groove Processing | - | 6.01 ～ 10 | 3 ～ 30 | 5 ～ 20 | F | T | For Radial Groove Milling | ℓ + ℓ1 ≤ 35 | ||
| 1 | 7 Days | 12 | 120 | Flank / Groove Processing | - | 8.01 ～ 12 | 3 ～ 31 | 5 ～ 20 | F | T | For Radial Groove Milling | ℓ + ℓ1 ≤ 36 | ||
| 1 | 7 Days | 4 | 50 | Flank / Groove Processing | 3.01 ～ 4 | 3 ～ 10 | 5 ～ 12 | - | F | T | For Radial Groove Milling | ℓ + ℓ1 ≤ 15 | ||
| 1 | 7 Days | 6 | 60 | Flank / Groove Processing | 3.01 ～ 6 | 3 ～ 19 | 5 ～ 20 | - | F | T | For Radial Groove Milling | ℓ + ℓ1 ≤ 24 | ||
| 1 | 7 Days | 8 | 60 | Flank / Groove Processing | 4.01 ～ 8 | 3 ～ 23 | 5 ～ 20 | - | F | T | For Radial Groove Milling | ℓ + ℓ1 ≤ 28 | ||
| 1 | 7 Days | 10 | 80 | Flank / Groove Processing | 6.01 ～ 10 | 3 ～ 30 | 5 ～ 20 | - | F | T | For Radial Groove Milling | ℓ + ℓ1 ≤ 35 | ||
| 1 | 7 Days | 12 | 80 | Flank / Groove Processing | 8.01 ～ 12 | 3 ～ 31 | 5 ～ 20 | - | F | T | For Radial Groove Milling | ℓ + ℓ1 ≤ 36 | ||
| 1 | 7 Days | 16 | 100 | Flank / Groove Processing | 10.01 ～ 16 | 3 ～ 43 | 5 ～ 20 | - | F | T | For Radial Groove Milling | ℓ + ℓ1 ≤ 48 |
Loading...
Specification Table
| Model Number | Blade Diameter D 0.01mm Unit Specification | Blade Length* ℓ 0.5 mm Unit Specification | Neck Length* ℓ1 1mm Unit Specification | Blade Shape (Selection) | *Specified range for under-neck length ℓ2 | Overall Length L | ||
| Shank diameter d | ||||||||
| BSZEM SZEM | LS−BSZEM LS−SZEM | |||||||
| BSZEM LS−BSZEM (Long Shank) SZEM LS−SZEM (Long Shank) | 4 | 3.01 to 4.00 | 3.0 to 10.0 | 5 ≤ ℓ1 ≤ 20 | T (Indented Center) F (Flat) | ℓ+ℓ1 ≤ 15 | 50 | 80 |
| 6 | 3.01 to 6.00 | 3.0 to 19.0 | ℓ+ℓ1 ≤ 24 | 60 | 90 | |||
| 8 | 4.01 to 8.00 | 3.0 to 23.0 | ℓ+ℓ1 ≤ 28 | 60 | 90 | |||
| 10 | 6.01 to 10.00 | 3.0 to 30.0 | ℓ+ℓ1 ≤ 35 | 80 | 120 | |||
| 12 | 8.01 to 12.00 | 3.0 to 31.0 | ℓ+ℓ1 ≤ 36 | 80 | 120 | |||
| 16 | 10.01 to 16.00 | 3.0 to 43.0 | ℓ+ℓ1 ≤ 48 | 100 | − | |||
*The combined size of the blade length (ℓ) and neck length (ℓ1) are within the above-mentioned under-neck length specification range.
Click here for the cutting conditions
Basic information
| Material | Ultrafine Particulate Carbide |
|---|
Configure
Basic Attributes
-
Shank Diameter d(mm)
- 4
- 6
- 8
- 10
- 12
- 16
-
Overall Length L(mm)
-
Processing Applications
- Boss Hole Drilling
- Flank / Groove Processing
-
#2
-
#3
-
#4
-
#5
-
F
- F
-
T
- T
-
Type
- BSZEM
- LS-BSZEM
- LS-SZEM
- SZEM
Filter by standard shipping days
-
- All
- 7 Days or Less
- 8 Days or Less
Optional Attributes
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Tech Support
Betalningsmetod
Faktura
Förskottsbetalning
Behovsstyrd tillverkning
Certifikat
Copyright © MISUMI Corporation All Rights Reserved.