Registrera dig
Filtreringsvillkor
MISUMI

Carbide Straight Edge Corner Angle End Mill, 2-Flute / Neck Relief Type

Carbide Straight Edge Corner Angle End Mill, 2-Flute / Neck Relief Type

Artikelnummer:

Ej färdigt: 22 kandidater hittades.
    Antal:

    Skiss

    Carbide Straight Edge Corner Angle End Mill, 2-Flute / Neck Relief Type: Related Image

     

    Artikelnummerlista

    Antal artiklar
  • 1
    • Artikelnummer
    BSZCAEM4-[3.01-4/0.01]-[5-85/1]-[0-59/1]-[0.1-1.9/0.01]-[3-10/0.5]-[5-12/0.5]-[F,T]
    BSZCAEM6-[3.01-6/0.01]-[5-85/1]-[0-59/1]-[0.1-2.9/0.01]-[3-19/0.5]-[5-20/0.5]-[F,T]
    BSZCAEM8-[4.01-8/0.01]-[5-85/1]-[0-59/1]-[0.1-3.9/0.01]-[3-23/0.5]-[5-20/0.5]-[F,T]
    BSZCAEM10-[6.01-10/0.01]-[5-85/1]-[0-59/1]-[0.1-4.9/0.01]-[3-30/0.5]-[5-20/0.5]-[F,T]
    BSZCAEM12-[8.01-12/0.01]-[5-85/1]-[0-59/1]-[0.1-5.9/0.01]-[3-31/0.5]-[5-20/0.5]-[F,T]
    BSZCAEM16-[10.01-16/0.01]-[5-85/1]-[0-59/1]-[0.1-7.9/0.01]-[3-43/0.5]-[5-20/0.5]-[F,T]
    LS-BSZCAEM4-[3.01-4/0.01]-[5-85/1]-[0-59/1]-[0.1-1.9/0.01]-[3-10/0.5]-[5-12/0.5]-[F,T]
    LS-BSZCAEM6-[3.01-6/0.01]-[5-85/1]-[0-59/1]-[0.1-2.9/0.01]-[3-19/0.5]-[5-20/0.5]-[F,T]
    LS-BSZCAEM8-[4.01-8/0.01]-[5-85/1]-[0-59/1]-[0.1-3.9/0.01]-[3-23/0.5]-[5-20/0.5]-[F,T]
    LS-BSZCAEM10-[6.01-10/0.01]-[5-85/1]-[0-59/1]-[0.1-4.9/0.01]-[3-30/0.5]-[5-20/0.5]-[F,T]
    LS-BSZCAEM12-[8.01-12/0.01]-[5-85/1]-[0-59/1]-[0.1-5.9/0.01]-[3-31/0.5]-[5-20/0.5]-[F,T]
    LS-SZCAEM4-[3.01-4/0.01]-[5-85/1]-[0-59/1]-[0.1-1.9/0.01]-[3-10/0.5]-[5-12/0.5]-[F,T]
    LS-SZCAEM6-[3.01-6/0.01]-[5-85/1]-[0-59/1]-[0.1-2.9/0.01]-[3-19/0.5]-[5-20/0.5]-[F,T]
    LS-SZCAEM8-[4.01-8/0.01]-[5-85/1]-[0-59/1]-[0.1-3.9/0.01]-[3-23/0.5]-[5-20/0.5]-[F,T]
    LS-SZCAEM10-[6.01-10/0.01]-[5-85/1]-[0-59/1]-[0.1-4.9/0.01]-[3-30/0.5]-[5-20/0.5]-[F,T]
    LS-SZCAEM12-[8.01-12/0.01]-[5-85/1]-[0-59/1]-[0.1-5.9/0.01]-[3-31/0.5]-[5-20/0.5]-[F,T]
    SZCAEM4-[3.01-4/0.01]-[5-85/1]-[0-59/1]-[0.1-1.9/0.01]-[3-10/0.5]-[5-12/0.5]-[F,T]
    SZCAEM6-[3.01-6/0.01]-[5-85/1]-[0-59/1]-[0.1-2.9/0.01]-[3-19/0.5]-[5-20/0.5]-[F,T]
    SZCAEM8-[4.01-8/0.01]-[5-85/1]-[0-59/1]-[0.1-3.9/0.01]-[3-23/0.5]-[5-20/0.5]-[F,T]
    SZCAEM10-[6.01-10/0.01]-[5-85/1]-[0-59/1]-[0.1-4.9/0.01]-[3-30/0.5]-[5-20/0.5]-[F,T]
    SZCAEM12-[8.01-12/0.01]-[5-85/1]-[0-59/1]-[0.1-5.9/0.01]-[3-31/0.5]-[5-20/0.5]-[F,T]
    SZCAEM16-[10.01-16/0.01]-[5-85/1]-[0-59/1]-[0.1-7.9/0.01]-[3-43/0.5]-[5-20/0.5]-[F,T]

    Shank Diameter d

    (mm)

    Overall Length L

    (mm)

    Processing Applications

    #2

    #3

    #4

    #5

    #6

    #7

    #8

    F

    T

    Use

    Below Neck Length Specified Range ℓ2

    (mm)

    		Minsta beställningsantal
    4
    50
    Boss Hole Drilling
    3.01 ～ 4
    5 ～ 85
    0 ～ 59
    0.1 ～ 1.9
    3 ～ 10
    5 ～ 12
    -
    F
    T
    For Boss Hole Drilling
    ℓ + ℓ1 ≤ 15
    1 stycken
    6
    60
    Boss Hole Drilling
    3.01 ～ 6
    5 ～ 85
    0 ～ 59
    0.1 ～ 2.9
    3 ～ 19
    5 ～ 20
    -
    F
    T
    For Boss Hole Drilling
    ℓ + ℓ1 ≤ 24
    1 stycken
    8
    60
    Boss Hole Drilling
    4.01 ～ 8
    5 ～ 85
    0 ～ 59
    0.1 ～ 3.9
    3 ～ 23
    5 ～ 20
    -
    F
    T
    For Boss Hole Drilling
    ℓ + ℓ1 ≤ 28
    1 stycken
    10
    80
    Boss Hole Drilling
    6.01 ～ 10
    5 ～ 85
    0 ～ 59
    0.1 ～ 4.9
    3 ～ 30
    5 ～ 20
    -
    F
    T
    For Boss Hole Drilling
    ℓ + ℓ1 ≤ 35
    1 stycken
    12
    80
    Boss Hole Drilling
    8.01 ～ 12
    5 ～ 85
    0 ～ 59
    0.1 ～ 5.9
    3 ～ 31
    5 ～ 20
    -
    F
    T
    For Boss Hole Drilling
    ℓ + ℓ1 ≤ 36
    1 stycken
    16
    100
    Boss Hole Drilling
    10.01 ～ 16
    5 ～ 85
    0 ～ 59
    0.1 ～ 7.9
    3 ～ 43
    5 ～ 20
    -
    F
    T
    For Boss Hole Drilling
    ℓ + ℓ1 ≤ 48
    1 stycken
    4
    80
    Boss Hole Drilling
    -
    3.01 ～ 4
    5 ～ 85
    0 ～ 59
    0.1 ～ 1.9
    3 ～ 10
    5 ～ 12
    F
    T
    For Boss Hole Drilling
    ℓ + ℓ1 ≤ 15
    1 stycken
    6
    90
    Boss Hole Drilling
    -
    3.01 ～ 6
    5 ～ 85
    0 ～ 59
    0.1 ～ 2.9
    3 ～ 19
    5 ～ 20
    F
    T
    For Boss Hole Drilling
    ℓ + ℓ1 ≤ 24
    1 stycken
    8
    90
    Boss Hole Drilling
    -
    4.01 ～ 8
    5 ～ 85
    0 ～ 59
    0.1 ～ 3.9
    3 ～ 23
    5 ～ 20
    F
    T
    For Boss Hole Drilling
    ℓ + ℓ1 ≤ 28
    1 stycken
    10
    120
    Boss Hole Drilling
    -
    6.01 ～ 10
    5 ～ 85
    0 ～ 59
    0.1 ～ 4.9
    3 ～ 30
    5 ～ 20
    F
    T
    For Boss Hole Drilling
    ℓ + ℓ1 ≤ 35
    1 stycken
    12
    120
    Boss Hole Drilling
    -
    8.01 ～ 12
    5 ～ 85
    0 ～ 59
    0.1 ～ 5.9
    3 ～ 31
    5 ～ 20
    F
    T
    For Boss Hole Drilling
    ℓ + ℓ1 ≤ 36
    1 stycken
    4
    80
    Flank / Groove Processing
    -
    3.01 ～ 4
    5 ～ 85
    0 ～ 59
    0.1 ～ 1.9
    3 ～ 10
    5 ～ 12
    F
    T
    For Radial Groove Milling
    ℓ + ℓ1 ≤ 15
    1 stycken
    6
    90
    Flank / Groove Processing
    -
    3.01 ～ 6
    5 ～ 85
    0 ～ 59
    0.1 ～ 2.9
    3 ～ 19
    5 ～ 20
    F
    T
    For Radial Groove Milling
    ℓ + ℓ1 ≤ 24
    1 stycken
    8
    90
    Flank / Groove Processing
    -
    4.01 ～ 8
    5 ～ 85
    0 ～ 59
    0.1 ～ 3.9
    3 ～ 23
    5 ～ 20
    F
    T
    For Radial Groove Milling
    ℓ + ℓ1 ≤ 28
    1 stycken
    10
    120
    Flank / Groove Processing
    -
    6.01 ～ 10
    5 ～ 85
    0 ～ 59
    0.1 ～ 4.9
    3 ～ 30
    5 ～ 20
    F
    T
    For Radial Groove Milling
    ℓ + ℓ1 ≤ 35
    1 stycken
    12
    120
    Flank / Groove Processing
    -
    8.01 ～ 12
    5 ～ 85
    0 ～ 59
    0.1 ～ 5.9
    3 ～ 31
    5 ～ 20
    F
    T
    For Radial Groove Milling
    ℓ + ℓ1 ≤ 36
    1 stycken
    4
    50
    Flank / Groove Processing
    3.01 ～ 4
    5 ～ 85
    0 ～ 59
    0.1 ～ 1.9
    3 ～ 10
    5 ～ 12
    -
    F
    T
    For Radial Groove Milling
    ℓ + ℓ1 ≤ 15
    1 stycken
    6
    60
    Flank / Groove Processing
    3.01 ～ 6
    5 ～ 85
    0 ～ 59
    0.1 ～ 2.9
    3 ～ 19
    5 ～ 20
    -
    F
    T
    For Radial Groove Milling
    ℓ + ℓ1 ≤ 24
    1 stycken
    8
    60
    Flank / Groove Processing
    4.01 ～ 8
    5 ～ 85
    0 ～ 59
    0.1 ～ 3.9
    3 ～ 23
    5 ～ 20
    -
    F
    T
    For Radial Groove Milling
    ℓ + ℓ1 ≤ 28
    1 stycken
    10
    80
    Flank / Groove Processing
    6.01 ～ 10
    5 ～ 85
    0 ～ 59
    0.1 ～ 4.9
    3 ～ 30
    5 ～ 20
    -
    F
    T
    For Radial Groove Milling
    ℓ + ℓ1 ≤ 35
    1 stycken
    12
    80
    Flank / Groove Processing
    8.01 ～ 12
    5 ～ 85
    0 ～ 59
    0.1 ～ 5.9
    3 ～ 31
    5 ～ 20
    -
    F
    T
    For Radial Groove Milling
    ℓ + ℓ1 ≤ 36
    1 stycken
    16
    100
    Flank / Groove Processing
    10.01 ～ 16
    5 ～ 85
    0 ～ 59
    0.1 ～ 7.9
    3 ～ 43
    5 ～ 20
    -
    F
    T
    For Radial Groove Milling
    ℓ + ℓ1 ≤ 48
    1 stycken
    Enhetspris (exklusive MOMS)(Enhetspris inklusive MOMS)
    Standardavsändningsdatum
    -
    ( - )
    7 arbetsdagar
    -
    ( - )
    7 arbetsdagar
    -
    ( - )
    7 arbetsdagar
    -
    ( - )
    7 arbetsdagar
    -
    ( - )
    7 arbetsdagar
    -
    ( - )
    7 arbetsdagar
    -
    ( - )
    8 arbetsdagar
    -
    ( - )
    7 arbetsdagar
    -
    ( - )
    7 arbetsdagar
    -
    ( - )
    7 arbetsdagar
    -
    ( - )
    7 arbetsdagar
    -
    ( - )
    8 arbetsdagar
    -
    ( - )
    7 arbetsdagar
    -
    ( - )
    7 arbetsdagar
    -
    ( - )
    7 arbetsdagar
    -
    ( - )
    7 arbetsdagar
    -
    ( - )
    7 arbetsdagar
    -
    ( - )
    7 arbetsdagar
    -
    ( - )
    7 arbetsdagar
    -
    ( - )
    7 arbetsdagar
    -
    ( - )
    7 arbetsdagar
    -
    ( - )
    7 arbetsdagar
  • 1

    • Detaljerad information

    Grundläggande information

    [Features]
    -Cornered bevel shape with neck recess for efficient machining when working deep
    .

    Specifikationer och pris

    Specification Table

    Carbide Straight Edge Corner Angle End Mill, 2-Flute / Neck Relief Type: Related Image
    Model Number Blade Diameter
    D
    0.01mm Unit Specification    		Corner Angle (Single Corner)
    θ
    °−min
    1' Unit Specification    		Angle Width
    D    1
    0.01mm Unit Specification    		Blade Length*
    ℓ
    0.5 mm Unit Specification    		Neck Length*
    ℓ1
    1mm Unit Specification    		End Cutting Edge Shape
    (Selection)    		*Under-neck Length
    Specified Range
    ℓ2    		Overall Length
    L
    Shank diameter
    d
    BSZCAEMLS−BSZCAEM
    BSZCAEM

    LS−BSZCAEM
    (Long Shank)    		43.01 to 4.005°0' to 85°0'0.10 ≤ Ｄ1 ≤ (D−0.2)/23.0 to 10.05 ≤ ℓ1 ≤ 20T
    (Indented Center)
    F
    (Flat)    		ℓ+ℓ1 ≤ 155080
    63.01 to 6.003.0 to 19.0ℓ+ℓ1 ≤ 246090
    84.01 to 8.003.0 to 23.0ℓ+ℓ1 ≤ 286090
    106.01 to 10.003.0 to 30.0ℓ+ℓ1 ≤ 3580120
    128.01 to 12.003.0 to 31.0ℓ+ℓ1 ≤ 3680120
    1610.01 to 16.003.0 to 43.0ℓ+ℓ1 ≤ 48100−

     

    Model Number Blade Diameter
    D
    0.01mm Unit Specification    		Corner Angle (Single Corner)
    θ
    °−min
    1' Unit Specification    		Angle Width
    D    1
    0.01mm Unit Specification    		Blade Length*
    ℓ
    0.5 mm Unit Specification    		Neck Length*
    ℓ1
    1mm Unit Specification    		End Cutting Edge Shape
    (Selection)    		*Under-neck Length
    Specified Range
    ℓ2    		Overall Length
    L
    Shank diameter
    d
    SZCAEMLS−SZCAEM
    SZCAEM

    LS−SZCAEM
    (Long Shank)    		43.01 to 4.005°0' to 85°0'0.10 ≤ D ≤ (D − 0.2)/23.0 to 10.05 ≤ ℓ1 ≤ 20T
    (Indented Center)
    F
    (Flat)    		ℓ+ℓ1 ≤ 155080
    63.01 to 6.003.0 to 19.0ℓ+ℓ1 ≤ 246090
    84.01 to 8.003.0 to 23.0ℓ+ℓ1 ≤ 286090
    106.01 to 10.003.0 to 30.0ℓ+ℓ1 ≤ 3580120
    128.01 to 12.003.0 to 31.0ℓ+ℓ1 ≤ 3680120
    1610.01 to 16.003.0 to 43.0ℓ+ℓ1 ≤ 48100−


    *The combined size of the blade length (ℓ) and neck length (ℓ1) are within the above-mentioned under-neck length specification range.
    Click here for the cutting conditions