Filtreringsvillkor
- Shank Diameter d(mm)
- 4
- 6
- 8
- 10
- 12
- 16
- Overall Length L(mm)
- 50
- 60
- 80
- 90
- 100
- 120
- #2[0.5-7.25/0.01]
- #3[0.5-5.25/0.01][0-30/1]
- #4[0-59/1]
- #5[0.5-48/0.5][0-59/1]
- #6[0.5-7.7/0.1][0.5-36/0.5]
- #7[0.5-5.7/0.1]
- 1D
- 1
- 2D
- 2
- 3D
- 3
- 4D
- 4
- Uppskattade leveransdagar
- Alla
- Inom 7 arbetsdagar
- Inom 8 arbetsdagar
Carbide Straight Edge Taper Ball End Mill, 2-flute / Chamfering Blade Type
Artikelnummer:
kandidater hittades.Skiss
Artikelnummerlista
Antal artiklar
| Artikelnummer |
|---|
Enhetspris (exklusive MOMS)(Enhetspris inklusive MOMS) | Standardavsändningsdatum |
|---|
- ( - ) | 8 arbetsdagar |
- ( - ) | 7 arbetsdagar |
- ( - ) | 7 arbetsdagar |
- ( - ) | 7 arbetsdagar |
- ( - ) | 7 arbetsdagar |
- ( - ) | 7 arbetsdagar |
- ( - ) | 7 arbetsdagar |
- ( - ) | 7 arbetsdagar |
- ( - ) | 7 arbetsdagar |
- ( - ) | 7 arbetsdagar |
- ( - ) | 7 arbetsdagar |
- ( - ) | 7 arbetsdagar |
- ( - ) | 7 arbetsdagar |
- ( - ) | 7 arbetsdagar |
- ( - ) | 7 arbetsdagar |
- ( - ) | 7 arbetsdagar |
- ( - ) | 7 arbetsdagar |
Detaljerad information
Grundläggande information
[Features]
-Conical spherical shape of the neck, type R, for efficient machining
.
Specifikationer och pris
Specification Table
Model Number
STBCMEM/LS−STBCMEM (Long Shank)
| Shank diameter d | Tip R 0.01mm Unit Specification | Single Corner θ °−min 1' Unit Specification | Blade Length* ℓ 0.5 mm Unit Specification | Chamfering Blade Width* CM 0.1 mm Unit Specification | Blade Diameter D | Blade ℓ1 | Overall Length L | ||
| Specified Range | ℓmax. | STBCMEM | LS−STBCMEM | ||||||
| 4 | 0.50 to 1.25 | 0°15' to 30°0' | (1) 0.5 ≤ ℓ ≤ D×4 and (2) ℓ ≤ ℓmax. (See table at right) and (3)  | 10.0 | 0.5 ≤ CM ≤ * | D=R×2×cosθ | ℓ1 = ℓ+CM | 50 | 80 |
| 6 | 0.50 to 2.25 | 18.0 | 60 | 90 | |||||
| 8 | 0.50 to 3.25 | 26.0 | 60 | 90 | |||||
| 10 | 0.50 to 4.25 | 34.0 | 80 | 120 | |||||
| 12 | 0.50 to 5.25 | 36.0 | 80 | 120 | |||||
| 16 | 0.50 to 7.25 | 48.0 | 100 | − | |||||
*Specify ℓ so that it meets all the conditions of (1), (2) and (3).
*Depending on the size of ℓ, all slope angles may be the blade length. Maximum chamfering blade width CM (max) = (d − D − tan θ× ℓ × 2) / 2
Click here for the cutting conditions
