MISUMIS START
Machining tools
Reamers
Carbide Reamers
Straight Reamers (Carbide)
Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner C Model

Filtreringsvillkor

Tool Diameter(mm)
[0.4-5.995/0.005mm units]
Groove Length(mm)
[0.5-34/0.5mm units]
No.
- 3
- 4
- 6
Bottom Blade Shape
- F (Flat)
- T (Center Dented)
Diameter Tolerance(mm)
- 0 ~ 0.003
- 0 ~ 0.005
Shank Diameter d(mm)
- 3
- 4
- 6
Overall Length L(mm)
- 60
- 80
- 100
Corner (C)(mm)
[0.1-2.89/0.01mm units]
Neck Length (ℓ1)(mm)
[5-45/1mm units]
Number of Flutes
- 2
- 4
Type
Uppskattade leveransdagar
- Alla
- Inom 8 arbetsdagar

MISUMI

Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner C Model

Föregående sida

Nästa sida

Artikelnummer:

Ej färdigt: 12 kandidater hittades.

Skiss
Artikelnummerlista
Detaljerad information

Skiss

Straight Reamer with Carbide Bottom Blade, 2-Flute / 4-Flute, Long / Corner C Model:Related Image

Artikelnummerlista

Antal artiklar

Artikelnummer

SEC-HP-RMSCCL3-2-[0.4-2.995/0.005]-[0.1-1.39/0.01]-[0.5-15/0.5]-[F,T]

SEC-HP-RMSCCL4-2-[2.005-3.995/0.005]-[0.1-1.89/0.01]-[0.5-30/0.5]-[F,T]

SEC-HP-RMSCCL6-[2,4]-[3.005-5.995/0.005]-[0.1-2.89/0.01]-[3-34/0.5]-[F,T]

SEC-HP-RMSCCLZ3-2-[2-2.995/0.005]-[0.1-1.39/0.01]-[0.5-15/0.5]-[5-45/1]-[F,T]

SEC-HP-RMSCCLZ4-2-[2-3.995/0.005]-[0.1-1.89/0.01]-[0.5-30/0.5]-[5-45/1]-[F,T]

SEC-HP-RMSCCLZ6-[2,4]-[3.005-5.995/0.005]-[0.1-2.89/0.01]-[3-34/0.5]-[5-45/1]-[F,T]

SEC-RMSCCL3-2-[0.4-2.995/0.005]-[0.1-1.39/0.01]-[0.5-15/0.5]-[F,T]

SEC-RMSCCL4-2-[2.005-3.995/0.005]-[0.1-1.89/0.01]-[0.5-30/0.5]-[F,T]

SEC-RMSCCL6-[2,4]-[3.005-5.995/0.005]-[0.1-2.89/0.01]-[3-34/0.5]-[F,T]

SEC-RMSCCLZ3-2-[2-2.995/0.005]-[0.1-1.39/0.01]-[0.5-15/0.5]-[5-45/1]-[F,T]

SEC-RMSCCLZ4-2-[2-3.995/0.005]-[0.1-1.89/0.01]-[0.5-30/0.5]-[5-45/1]-[F,T]

SEC-RMSCCLZ6-[2,4]-[3.005-5.995/0.005]-[0.1-2.89/0.01]-[3-34/0.5]-[5-45/1]-[F,T]

Tool Diameter

(mm)

Groove Length

(mm)

No.

Bottom Blade Shape

Diameter Tolerance

(mm)

Shank Diameter d

(mm)

Overall Length L

(mm)

Corner (C)

(mm)

Neck Length (ℓ1)

(mm)

Number of Flutes

Length Under Neck ℓ2

Minsta beställningsantal

0.4 ～ 2.995	0.5 ～ 15	3	F (Flat) / T (Center Dented)	0 ~ 0.003	3	60	0.1 ～ 1.39	-	2	-	1 stycken
2.005 ～ 3.995	0.5 ～ 30	4	F (Flat) / T (Center Dented)	0 ~ 0.003	4	80	0.1 ～ 1.89	-	2	-	1 stycken
3.005 ～ 5.995	3 ～ 34	6	F (Flat) / T (Center Dented)	0 ~ 0.003	6	100	0.1 ～ 2.89	-	2 ～ 4	-	1 stycken
2 ～ 2.995	0.5 ～ 15	3	F (Flat) / T (Center Dented)	0 ~ 0.003	3	60	0.1 ～ 1.39	5 ～ 45	2	ℓ + ℓ1 ≦ 20	1 stycken
2 ～ 3.995	0.5 ～ 30	4	F (Flat) / T (Center Dented)	0 ~ 0.003	4	80	0.1 ～ 1.89	5 ～ 45	2	ℓ + ℓ1 ≦ 50	1 stycken
3.005 ～ 5.995	3 ～ 34	6	F (Flat) / T (Center Dented)	0 ~ 0.003	6	100	0.1 ～ 2.89	5 ～ 45	2 ～ 4	ℓ + ℓ1 ≦ 70	1 stycken
0.4 ～ 2.995	0.5 ～ 15	3	F (Flat) / T (Center Dented)	0 ~ 0.005	3	60	0.1 ～ 1.39	-	2	-	1 stycken
2.005 ～ 3.995	0.5 ～ 30	4	F (Flat) / T (Center Dented)	0 ~ 0.005	4	80	0.1 ～ 1.89	-	2	-	1 stycken
3.005 ～ 5.995	3 ～ 34	6	F (Flat) / T (Center Dented)	0 ~ 0.005	6	100	0.1 ～ 2.89	-	2 ～ 4	-	1 stycken
2 ～ 2.995	0.5 ～ 15	3	F (Flat) / T (Center Dented)	0 ~ 0.005	3	60	0.1 ～ 1.39	5 ～ 45	2	ℓ + ℓ1 ≦ 20	1 stycken
2 ～ 3.995	0.5 ～ 30	4	F (Flat) / T (Center Dented)	0 ~ 0.005	4	80	0.1 ～ 1.89	5 ～ 45	2	ℓ + ℓ1 ≦ 50	1 stycken
3.005 ～ 5.995	3 ～ 34	6	F (Flat) / T (Center Dented)	0 ~ 0.005	6	100	0.1 ～ 2.89	5 ～ 45	2 ～ 4	ℓ + ℓ1 ≦ 70	1 stycken

Enhetspris (exklusive MOMS)(Enhetspris inklusive MOMS)	Standardavsändningsdatum

- ( - )	8 arbetsdagar
- ( - )	8 arbetsdagar
- ( - )	8 arbetsdagar
- ( - )	8 arbetsdagar
- ( - )	8 arbetsdagar
- ( - )	8 arbetsdagar
- ( - )	8 arbetsdagar
- ( - )	8 arbetsdagar
- ( - )	8 arbetsdagar
- ( - )	8 arbetsdagar
- ( - )	8 arbetsdagar
- ( - )	8 arbetsdagar

Grundläggande information

[Features]
-Since it has a flute, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function
-Direct reaming is possible without correction by an end mill after drilling a pilot hole
-Long type enables machining of deep holes

Specifikationer och pris

Specifications

Model Number		Number of Flutes (Selection)	Flute Diameter D 0.005 mm Increment Designation	Corner C 0.01 mm Increment Designation	Blade Length ℓ 0.5 mm Increment Designation	Bottom Blade Shape (Selection)	Overall Length L	Shank Diameter d
Model Number	No.	Number of Flutes (Selection)	Flute Diameter D 0.005 mm Increment Designation	Corner C 0.01 mm Increment Designation	Blade Length ℓ 0.5 mm Increment Designation	Bottom Blade Shape (Selection)	Overall Length L	Shank Diameter d
SEC-RMSCCL SEC-HP-RMSCCL	3	2	0.400 ~ 0.495	0.10 ≤ C ≤ (D-0.2) / 2	0.5 ~ 1.0	T (Dished) F (Flat) >>P.994	60	3
	3	2	0.500 ~ 1.500		0.5 ~ 5.0		60	3
	3	2	1.505 ~ 2.000		0.5 ~ 10.0		60	3
	3	2	2.005 ~ 2.995		0.5 ~ 15.0		60	3
	4	2	2.005 ~ 3.995		0.5 ~ 30.0		80	4
	6	2 4	3.005 ~ 5.995		3.0 ~ 34.0		100	6

Model Number		Number of Flutes (Selection)	Flute Diameter D 0.005 mm Increment Designation	Corner C 0.01 mm Increment Designation	Blade Length ℓ 0.5 mm Increment Designation	Neck Length ℓ1 1 mm Increment Designation	Bottom Blade Shape (Selection)	Length Under Neck Specified Range ℓ2	Overall Length L	Shank Diameter d
	No.
SEC-RMSCCLZ SEC-HP-RMSCCLZ	3	2	2.000 ~ 2.995	0.10 ≤ C ≤ (D-0.2) / 2	0.5 ~ 15.0	5 ≤ ℓ1 ≤ 45	T (Dished) F (Flat)	ℓ + ℓ1 ≤ 20	60	3
	4	2	2.000 ~ 3.995		0.5 ~ 30.0			ℓ+ℓ1≤50	80	4
	6	2 4	3.005 ~ 5.995		3.0 ~ 34.0			ℓ+ℓ1≤70	100	6

* The combined dimensions of the blade length (ℓ) and neck length (ℓ1) will be within the length under neck (ℓ2) designation range given above.

For Cutting Conditions, Refer to >>Click here.

Funktioner och användningsexempel

More Information

Ytterligare behandling och beläggning

Alterations

Model Number	Coating Addition
SEC-RMSCCL	○
SEC-RMSCCLZ	○
SEC-HP-RMSCCL	-
SEC-HP-RMSCCLZ	-

Coating
How to Order / Charge Details >>Click here.