Filtreringsvillkor
- Tool Diameter(mm)
- 3
- 3.005
- 3.01
- 4
- 4.005
- 4.01
- 5
- 5.005
- 5.01
- 6
- 6.005
- 6.01
- 7
- 7.01
- 8
- 8.005
- 8.01
- 9
- 9.01
- 10
- 10.005
- 10.01
- Groove Length(mm)
- 20
- 25
- 30
- Shank Diameter d(mm)
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- Number of Flutes(Sheet(s))
- 4
- 6
- Overall Length L(mm)
- 65
- 75
- 100
- 110
- 125
- 135
- 150
- Type
- Uppskattade leveransdagar
- Alla
- Inom 5 arbetsdagar
Spiral Reamer with Carbide Bottom Blade
Artikelnummer:
kandidater hittades.Skiss
Artikelnummerlista
Antal artiklar
| Artikelnummer |
|---|
Enhetspris (exklusive MOMS)(Enhetspris inklusive MOMS) | Standardavsändningsdatum |
|---|
94.13 € ( 112.01 € ) | 5 arbetsdagar |
94.13 € ( 112.01 € ) | 5 arbetsdagar |
94.13 € ( 112.01 € ) | 5 arbetsdagar |
108.54 € ( 129.16 € ) | 5 arbetsdagar |
114.00 € ( 135.66 € ) | 5 arbetsdagar |
114.00 € ( 135.66 € ) | 5 arbetsdagar |
128.68 € ( 153.13 € ) | 5 arbetsdagar |
128.68 € ( 153.13 € ) | 5 arbetsdagar |
128.68 € ( 153.13 € ) | 5 arbetsdagar |
136.88 € ( 162.89 € ) | 5 arbetsdagar |
86.03 € ( 102.38 € ) | 5 arbetsdagar |
86.03 € ( 102.38 € ) | 5 arbetsdagar |
106.59 € ( 126.84 € ) | 5 arbetsdagar |
106.59 € ( 126.84 € ) | 5 arbetsdagar |
112.71 € ( 134.12 € ) | 5 arbetsdagar |
119.92 € ( 142.70 € ) | 5 arbetsdagar |
119.92 € ( 142.70 € ) | 5 arbetsdagar |
144.89 € ( 172.42 € ) | 5 arbetsdagar |
144.89 € ( 172.42 € ) | 5 arbetsdagar |
153.62 € ( 182.81 € ) | 5 arbetsdagar |
154.85 € ( 184.27 € ) | 5 arbetsdagar |
154.85 € ( 184.27 € ) | 5 arbetsdagar |
Detaljerad information
Grundläggande information
[Features]
-Since it has a face groove, it can simultaneously correct the curvature of the hole with the milling function and improve the surface roughness with the smoothing function
-Direct reaming is possible without correction by an end mill after drilling a pilot hole
-Even higher cutting speed is possible by using spiral grooves
Specifikationer och pris
Specifications
Model Number
SEC-ECSPHR
| Flute Diameter D | Chamfer Length T | Blade Length ℓ | Under Neck ℓ1 | Overall Length L | Shank Diameter d | Number of Flutes | Bottom Blade Shape |
| 3 | 0.15 | 20 | 40 | 65 | 3 | 4 | Flat |
| 3.005 | 0.15 | 20 | 40 | 65 | 3 | 4 | |
| 3.01 | 0.15 | 20 | 40 | 65 | 3 | 4 | |
| 4 | 0.2 | 20 | 40 | 65 | 4 | 4 | |
| 4.005 | 0.2 | 25 | 45 | 75 | 4 | 4 | |
| 4.01 | 0.2 | 25 | 45 | 75 | 4 | 4 | |
| 5 | 0.2 | 25 | 45 | 75 | 5 | 4 | |
| 5.005 | 0.2 | 25 | 45 | 75 | 5 | 4 | |
| 5.01 | 0.2 | 25 | 45 | 75 | 5 | 4 | |
| 6 | 0.3 | 25 | 65 | 100 | 6 | 6 | |
| 6.005 | 0.3 | 25 | 65 | 100 | 6 | 6 | |
| 6.01 | 0.3 | 25 | 65 | 100 | 6 | 6 | |
| 7 | 0.3 | 25 | 70 | 110 | 7 | 6 | |
| 7.005 | 0.3 | 25 | 70 | 110 | 7 | 6 | |
| 7.01 | 0.3 | 25 | 70 | 110 | 7 | 6 | |
| 8 | 0.3 | 25 | 85 | 125 | 8 | 6 | |
| 8.005 | 0.3 | 25 | 85 | 125 | 8 | 6 | |
| 8.01 | 0.3 | 25 | 85 | 125 | 8 | 6 | |
| 9 | 0.3 | 30 | 90 | 135 | 9 | 6 | |
| 9.005 | 0.3 | 30 | 90 | 135 | 9 | 6 | |
| 9.01 | 0.3 | 30 | 90 | 135 | 9 | 6 | |
| 10 | 0.3 | 30 | 100 | 150 | 10 | 6 | |
| 10.005 | 0.3 | 30 | 100 | 150 | 10 | 6 | |
| 10.01 | 0.3 | 30 | 100 | 150 | 10 | 6 |
For Cutting Conditions, Refer to >>Click here.
Funktioner och användningsexempel
More Information
● Skew compensation for the hole can be achieved using the milling effect, simultaneously with improved surface roughness using the burnishing effect.
● Following the drilling of pilot holes, reaming can be done directly without going through the correction process with end milling.
● It is possible for high-speed cutting to be done even faster by adopting a helical flute.