Filtreringsvillkor
- Pitch, Number of Threads(mm)
- 0.5
- 0.7
- 0.8
- 1
- 1.25
- 1.5
- Overall Length (L)(mm)
- 46
- 52
- 60
- 62
- 70
- 75
- 100
- 150
- Thread Length
- 11
- 13
- 16
- 19
- 22
- 24
- Shank Diameter(φ)
- 4
- 5
- 5.5
- 6
- 6.2
- 7
- No. of Grooves
- 3
- 4
- Square Part Length(mm)
- 6
- 7
- 8
- Square Part Width(mm)
- 3.2
- 4
- 4.5
- 5
- 5.5
- Quantity/Pack
- Uppskattade leveransdagar
- Alla
- Inom 5 arbetsdagar
TiN Coated High-Speed Steel Point Tap【1 till 5 stycken】
Artikelnummer:
kandidater hittades.Skiss
Artikelnummerlista
Antal artiklar
| Artikelnummer |
|---|
Enhetspris (exklusive MOMS)(Enhetspris inklusive MOMS) | Standardavsändningsdatum |
|---|
17.94 € ( 21.35 € ) | 5 arbetsdagar |
16.91 € ( 20.12 € ) | 5 arbetsdagar |
14.97 € ( 17.81 € ) | 5 arbetsdagar |
13.46 € ( 16.02 € ) | 5 arbetsdagar |
26.93 € ( 32.05 € ) | 5 arbetsdagar |
31.64 € ( 37.65 € ) | 5 arbetsdagar |
50.42 € ( 60.00 € ) | 5 arbetsdagar |
49.24 € ( 58.60 € ) | 5 arbetsdagar |
50.34 € ( 59.90 € ) | 5 arbetsdagar |
51.53 € ( 61.32 € ) | 5 arbetsdagar |
68.06 € ( 80.99 € ) | 5 arbetsdagar |
87.43 € ( 104.04 € ) | 5 arbetsdagar |
Detaljerad information
Grundläggande information
[Features]
-Can be used for through hole machining
-Suitable for a wide range of materials, but is particularly effective for tapping steel alloys and stainless steel etc.
-Excellent abrasion resistance and resistance to chip welding due to TiN coating
-Long shank, ideal for drilling deep tapped holes (G-LS-POT).
Specifikationer och pris
Specifications
Model Number
G-POT
1 Pack 5 Pieces Included
| Nominal M x P | Chamfer Lcf | Precision | Overall Length L | Thread Length Lc | Length Under Neck L1 | Shank Diameter d | No. of Grooves | Square Part Length Lk | Square Part Width K | Quantity/ pack | |
| M3 | 0.5 | 5P | LM2 | 46 | 11 | 18 | 4 | 3 | 6 | 3.2 | 5 Pieces |
| M4 | 0.7 | LM2 | 52 | 13 | 20 | 5 | 7 | 4 | |||
| M5 | 0.8 | LM2 | 60 | 16 | 25 | 5.5 | 7 | 4.5 | |||
| M6 | 1 | LM2 | 62 | 19 | 28 | 6 | 7 | 4.5 | |||
| M8 | 1.25 | LM3 | 70 | 22 | 35 | 6.2 | 8 | 5 | |||
| M10 | 1.5 | LM3 | 75 | 24 | 39 | 7 | 8 | 5.5 | |||
Model Number
G-LS-POT (Long Shank Type)
| Nominal M x P | Chamfer Lcf | Precision | Overall Length L | Thread Length Lc | Length Under Neck L1 | Shank Diameter d | No. of Grooves | Square Part Length Lk | Square Part Width K | |
| M3 | 0.5 | 5P | LM2 | 100 | 11 | 18 | 4 | 3 | 6 | 3.2 |
| M4 | 0.7 | LM2 | 100 | 13 | 21 | 5 | 3 | 7 | 4 | |
| M5 | 0.8 | LM2 | 100 | 16 | 25 | 5.5 | 3 | 7 | 4.5 | |
| M6 | 1 | LM2 | 100 | 19 | 30 | 6 | 3 | 7 | 4.5 | |
| M8 | 1.25 | LM3 | 150 | 22 | 35 | 6.2 | 4 | 8 | 5 | |
| M10 | 1.5 | LM3 | 150 | 24 | 39 | 7 | 4 | 8 | 5.5 | |
For Cutting Conditions, Refer to >>Click here.
Technical information >>Click here.
Funktioner och användningsexempel
More Information
● Used for machining through-holes.
● A large range of work materials can be accommodated, and it is especially well-suited for tapping alloy steel and stainless steel, etc.
● The TiN coating provides excellent wear resistance and welding resistance.
● The long shank model is ideal for machining screw holes in deep locations. (G-LS-POT)