Stainless Steel / Heat-resistant alloy, titanium alloy | 4 | H490 ANCX 090404PDR | 6.6 | 5.2 | - | IC330 | 0.4 | 5.0 | - | 8.6 | Tough material and new AlTiN PVD coating. Good cut fragment removal. Ideal for stainless steel, heat-resistant alloys, steel allows, and other milling. Also ideal for disconnection and heavy cutting. | Planing / Shoulder Cutting / Grooving | 10 stycken |
Steel / Stainless Steel / Heat-resistant alloy, titanium alloy / High Hardness Material | 4 | H490 ANCX 090404PDR | 6.6 | 5.2 | - | IC808 | 0.4 | 5.0 | - | 8.6 | Tough, ultrafine particulate carbide base material and new TiAlN PVD coating. Favorable cut removal at moderate to high cutting speeds ideal for interrupted cutting and other cutting work under unstable conditions. | Planing / Shoulder Cutting / Grooving | 10 stycken |
Cast Iron | 4 | H490 ANCX 090404PDR | 6.6 | 5.2 | - | IC810 | 0.4 | 5.0 | - | 8.6 | The tough base material is coated with new AlTiN PVD that has excellent oxidation resistance. Recommended for nodular forged milling work under unstable conditions and low to medium cutting speed gray case iron milling. | Planing / Shoulder Cutting / Grooving | 10 stycken |
Stainless Steel / Heat-resistant alloy, titanium alloy | 4 | H490 ANCX 090404PDR | 6.6 | 5.2 | - | IC830 | 0.4 | 5.0 | - | 8.6 | Tough material and new TiAlN PVD coating. Good cut fragment removal. Ideal for stainless steel, heat-resistant alloys, steel allows, and other milling. Also ideal for disconnection and heavy cutting. | Planing / Shoulder Cutting / Grooving | 10 stycken |
Stainless Steel / Heat-resistant alloy, titanium alloy | 4 | H490 ANCX 090408PDR | 6.6 | 5.2 | - | IC330 | 0.8 | 5.0 | - | 8.6 | Tough material and new AlTiN PVD coating. Good cut fragment removal. Ideal for stainless steel, heat-resistant alloys, steel allows, and other milling. Also ideal for disconnection and heavy cutting. | Planing / Shoulder Cutting / Grooving | 10 stycken |
Stainless Steel / Heat-resistant alloy, titanium alloy | 4 | H490 ANCX 090408PDR | 6.6 | 5.2 | - | IC380 | 0.8 | 5.0 | - | 8.6 | Tough material and new PVD coating. Excellent high-speed cut resistant blade tip construction and heat resistant cracking. | Planing / Shoulder Cutting / Grooving | 10 stycken |
Steel / Stainless Steel / Heat-resistant alloy, titanium alloy / High Hardness Material | 4 | H490 ANCX 090408PDR | 6.6 | 5.2 | - | IC808 | 0.8 | 5.0 | - | 8.6 | Tough, ultrafine particulate carbide base material and new TiAlN PVD coating. Favorable cut removal at moderate to high cutting speeds ideal for interrupted cutting and other cutting work under unstable conditions. | Planing / Shoulder Cutting / Grooving | 10 stycken |
Cast Iron | 4 | H490 ANCX 090408PDR | 6.6 | 5.2 | - | IC810 | 0.8 | 5.0 | - | 8.6 | The tough base material is coated with new AlTiN PVD that has excellent oxidation resistance. Recommended for nodular forged milling work under unstable conditions and low to medium cutting speed gray case iron milling. | Planing / Shoulder Cutting / Grooving | 10 stycken |
Stainless Steel / Heat-resistant alloy, titanium alloy | 4 | H490 ANCX 090408PDR | 6.6 | 5.2 | - | IC830 | 0.8 | 5.0 | - | 8.6 | Tough material and new TiAlN PVD coating. Good cut fragment removal. Ideal for stainless steel, heat-resistant alloys, steel allows, and other milling. Also ideal for disconnection and heavy cutting. | Planing / Shoulder Cutting / Grooving | 10 stycken |
Steel / Stainless Steel / Heat-resistant alloy, titanium alloy / High Hardness Material | 4 | H490 ANCX 090412PDR | 6.6 | 5.2 | - | IC808 | 1.2 | 5.0 | - | 8.6 | Tough, ultrafine particulate carbide base material and new TiAlN PVD coating. Favorable cut removal at moderate to high cutting speeds ideal for interrupted cutting and other cutting work under unstable conditions. | Planing / Shoulder Cutting / Grooving | 10 stycken |
Stainless Steel / Heat-resistant alloy, titanium alloy | 4 | H490 ANCX 090412PDR | 6.6 | 5.2 | - | IC830 | 1.2 | 5.0 | - | 8.6 | Tough material and new TiAlN PVD coating. Good cut fragment removal. Ideal for stainless steel, heat-resistant alloys, steel allows, and other milling. Also ideal for disconnection and heavy cutting. | Planing / Shoulder Cutting / Grooving | 10 stycken |
Steel / Stainless Steel / Heat-resistant alloy, titanium alloy / High Hardness Material | 4 | H490 ANCX 090416PDR | 6.6 | 5.2 | - | IC808 | 1.6 | 5.0 | - | 8.6 | Tough, ultrafine particulate carbide base material and new TiAlN PVD coating. Favorable cut removal at moderate to high cutting speeds ideal for interrupted cutting and other cutting work under unstable conditions. | Planing / Shoulder Cutting / Grooving | 10 stycken |
Cast Iron | 4 | H490 ANCX 090416PDR | 6.6 | 5.2 | - | IC810 | 1.6 | 5.0 | - | 8.6 | The tough base material is coated with new AlTiN PVD that has excellent oxidation resistance. Recommended for nodular forged milling work under unstable conditions and low to medium cutting speed gray case iron milling. | Planing / Shoulder Cutting / Grooving | 10 stycken |
Stainless Steel / Heat-resistant alloy, titanium alloy | 4 | H490 ANCX 090416PDR | 6.6 | 5.2 | - | IC830 | 1.6 | 5.0 | - | 8.6 | Tough material and new TiAlN PVD coating. Good cut fragment removal. Ideal for stainless steel, heat-resistant alloys, steel allows, and other milling. Also ideal for disconnection and heavy cutting. | Planing / Shoulder Cutting / Grooving | 10 stycken |
Stainless Steel / Heat-resistant alloy, titanium alloy | 4 | H490 ANCX.. 1205…-FF | 10.2 | 6.40 | - | IC830 | 1.5 | 3.5 | 2.0 (Note 1) / 12.0 (Note 2) | 13.5 | Tough material and new TiAlN PVD coating. Good cut fragment removal. Ideal for stainless steel, heat-resistant alloys, steel allows, and other milling. Also ideal for disconnection and heavy cutting. | Planing / Shoulder Cutting / Grooving | 10 stycken |
Stainless Steel / Heat-resistant alloy, titanium alloy | 4 | H490 AN.. 1205…-DR | 10 | 9.15 | - | IC330 | 0.8 | 3.5 | - | 13.67 | Tough material and new AlTiN PVD coating. Good cut fragment removal. Ideal for stainless steel, heat-resistant alloys, steel allows, and other milling. Also ideal for disconnection and heavy cutting. | Planing / Shoulder Cutting / Grooving | 10 stycken |
Stainless Steel / Heat-resistant alloy, titanium alloy | 4 | H490 AN.. 1205…-DR | 10 | 9.15 | - | IC380 | 0.8 | 3.5 | - | 13.67 | Tough material and new PVD coating. Excellent high-speed cut resistant blade tip construction and heat resistant cracking. | Planing / Shoulder Cutting / Grooving | 10 stycken |
Steel / Stainless Steel / Heat-resistant alloy, titanium alloy / High Hardness Material | 4 | H490 AN.. 1205…-DR | 10 | 9.15 | - | IC808 | 0.8 | 3.5 | - | 13.67 | Tough, ultrafine particulate carbide base material and new TiAlN PVD coating. Favorable cut removal at moderate to high cutting speeds ideal for interrupted cutting and other cutting work under unstable conditions. | Planing / Shoulder Cutting / Grooving | 10 stycken |
Stainless Steel / Heat-resistant alloy, titanium alloy | 4 | H490 AN.. 1205…-DR | 10 | 9.15 | - | IC830 | 0.8 | 3.5 | - | 13.67 | Tough material and new TiAlN PVD coating. Good cut fragment removal. Ideal for stainless steel, heat-resistant alloys, steel allows, and other milling. Also ideal for disconnection and heavy cutting. | Planing / Shoulder Cutting / Grooving | 10 stycken |
Stainless Steel / Heat-resistant alloy, titanium alloy | 4 | H490 ANCX..17.. | 11.2 | 10.4 | - | IC330 | 0.8 | 4.7 | - | 16.7 | Tough material and new AlTiN PVD coating. Good cut fragment removal. Ideal for stainless steel, heat-resistant alloys, steel allows, and other milling. Also ideal for disconnection and heavy cutting. | Shoulder Grinding | 10 stycken |
Stainless Steel / Heat-resistant alloy, titanium alloy | 4 | H490 ANCX..17.. | 11.2 | 10.4 | - | IC380 | 0.8 | 4.7 | - | 16.7 | Tough material and new PVD coating. Excellent high-speed cut resistant blade tip construction and heat resistant cracking. | Shoulder Grinding | 10 stycken |
Cast Iron | 4 | H490 ANCX..17.. | 11.2 | 10.4 | - | IC5100 | 0.8 | 4.7 | - | 16.7 | The tough base material is coated with new MTCVD and alpha Al2O3 coating. Ideal for gray cast iron high speed milling and provides a long tool life. | Shoulder Grinding | 10 stycken |
Steel / Stainless Steel / Heat-resistant alloy, titanium alloy / High Hardness Material | 4 | H490 ANCX..17.. | 11.2 | 10.4 | - | IC808 | 0.8 | 4.7 | - | 16.7 | Tough, ultrafine particulate carbide base material and new TiAlN PVD coating. Favorable cut removal at moderate to high cutting speeds ideal for interrupted cutting and other cutting work under unstable conditions. | Shoulder Grinding | 10 stycken |
Cast Iron | 4 | H490 ANCX..17.. | 11.2 | 10.4 | - | IC810 | 0.8 | 4.7 | - | 16.7 | The tough base material is coated with new AlTiN PVD that has excellent oxidation resistance. Recommended for nodular forged milling work under unstable conditions and low to medium cutting speed gray case iron milling. | Shoulder Grinding | 10 stycken |
Stainless Steel / Heat-resistant alloy, titanium alloy | 4 | H490 ANCX..17.. | 11.2 | 10.4 | - | IC830 | 0.8 | 4.7 | - | 16.7 | Tough material and new TiAlN PVD coating. Good cut fragment removal. Ideal for stainless steel, heat-resistant alloys, steel allows, and other milling. Also ideal for disconnection and heavy cutting. | Shoulder Grinding | 10 stycken |
Stainless Steel / Cast Iron / Heat-resistant alloy, titanium alloy / High Hardness Material | 4 | H490 ANCX..17.. | 11.2 | 10.4 | - | IC908 | 0.8 | 4.7 | - | 16.7 | Ultra-fine particulate carbide with TiAlN coating. High plastic distortion resistance. Medium feed, medium cutting speed. | Shoulder Grinding | 10 stycken |
Stainless Steel / Heat-resistant alloy, titanium alloy | 4 | H490 ANKX 090408PNTR | 6.6 | 5.2 | - | IC330 | 0.8 | 5.0 | - | 8.6 | Tough material and new AlTiN PVD coating. Good cut fragment removal. Ideal for stainless steel, heat-resistant alloys, steel allows, and other milling. Also ideal for disconnection and heavy cutting. | Planing / Shoulder Cutting / Grooving | 10 stycken |
Steel / Stainless Steel / Heat-resistant alloy, titanium alloy / High Hardness Material | 4 | H490 ANKX 090408PNTR | 6.6 | 5.2 | - | IC808 | 0.8 | 5.0 | - | 8.6 | Tough, ultrafine particulate carbide base material and new TiAlN PVD coating. Favorable cut removal at moderate to high cutting speeds ideal for interrupted cutting and other cutting work under unstable conditions. | Planing / Shoulder Cutting / Grooving | 10 stycken |
Cast Iron | 4 | H490 ANKX 090408PNTR | 6.6 | 5.2 | - | IC810 | 0.8 | 5.0 | - | 8.6 | The tough base material is coated with new AlTiN PVD that has excellent oxidation resistance. Recommended for nodular forged milling work under unstable conditions and low to medium cutting speed gray case iron milling. | Planing / Shoulder Cutting / Grooving | 10 stycken |
Stainless Steel / Heat-resistant alloy, titanium alloy | 4 | H490 ANKX 090408PNTR | 6.6 | 5.2 | - | IC830 | 0.8 | 5.0 | - | 8.6 | Tough material and new TiAlN PVD coating. Good cut fragment removal. Ideal for stainless steel, heat-resistant alloys, steel allows, and other milling. Also ideal for disconnection and heavy cutting. | Planing / Shoulder Cutting / Grooving | 10 stycken |
Stainless Steel / Heat-resistant alloy, titanium alloy | 4 | H490 ANKX 0904R12T-FF | 6.2 | 4.3 | - | IC830 | 1 | 2.3 | 1.0 | 8.5 | Tough material and new TiAlN PVD coating. Good cut fragment removal. Ideal for stainless steel, heat-resistant alloys, steel allows, and other milling. Also ideal for disconnection and heavy cutting. | Planing / Shoulder Cutting / Grooving | 10 stycken |
Stainless Steel / Heat-resistant alloy, titanium alloy | 4 | H490 AN.. 1205 (tip splitter) | 10 | 9.15 | - | IC830 | 0.8 | 3.5 | - | 13.70 | Tough material and new TiAlN PVD coating. Good cut fragment removal. Ideal for stainless steel, heat-resistant alloys, steel allows, and other milling. Also ideal for disconnection and heavy cutting. | Planing / Shoulder Cutting / Grooving | 10 stycken |
Steel / Stainless Steel / Heat-resistant alloy, titanium alloy / High Hardness Material | 4 | H490 AN.. 1205 (reinforced blade tip type) | 10 | 9.15 | For heavy / intermittent machining | IC808 | 0.8 | 3.5 | - | 13.70 | Tough, ultrafine particulate carbide base material and new TiAlN PVD coating. Favorable cut removal at moderate to high cutting speeds ideal for interrupted cutting and other cutting work under unstable conditions. | Planing / Shoulder Cutting / Grooving | 10 stycken |
Stainless Steel / Heat-resistant alloy, titanium alloy | 4 | H490 AN.. 1205 (reinforced blade tip type) | 10 | 9.15 | For heavy / intermittent machining | IC830 | 0.8 | 3.5 | - | 13.70 | Tough material and new TiAlN PVD coating. Good cut fragment removal. Ideal for stainless steel, heat-resistant alloys, steel allows, and other milling. Also ideal for disconnection and heavy cutting. | Planing / Shoulder Cutting / Grooving | 10 stycken |
Stainless Steel / Heat-resistant alloy, titanium alloy | 4 | H490 AN.. 1205 (Note 3) | 10.2 | 6.40 | - | IC830 | 1.5 (Note 4) | 3.5 | 2.0 (Note 1) / 12.0 (Note 2) | 13.5 | Tough material and new TiAlN PVD coating. Good cut fragment removal. Ideal for stainless steel, heat-resistant alloys, steel allows, and other milling. Also ideal for disconnection and heavy cutting. | Planing / Shoulder Cutting / Grooving | 10 stycken |
Stainless Steel / Heat-resistant alloy, titanium alloy | 4 | H490 AN.. 1205…-NTR | 10 | 9.15 | - | IC330 | 0.4 | 3.8 | - | 13.70 | Tough material and new AlTiN PVD coating. Good cut fragment removal. Ideal for stainless steel, heat-resistant alloys, steel allows, and other milling. Also ideal for disconnection and heavy cutting. | Planing / Shoulder Cutting / Grooving | 10 stycken |
Stainless Steel / Heat-resistant alloy, titanium alloy | 4 | H490 AN.. 1205…-NTR | 10 | 9.15 | - | IC830 | 0.4 | 3.8 | - | 13.70 | Tough material and new TiAlN PVD coating. Good cut fragment removal. Ideal for stainless steel, heat-resistant alloys, steel allows, and other milling. Also ideal for disconnection and heavy cutting. | Planing / Shoulder Cutting / Grooving | 10 stycken |
Steel / Cast Iron / Heat-resistant alloy, titanium alloy | 4 | H490 AN.. 1205…-NTR | 10 | 9.15 | - | IC328 | 0.8 | 3.5 | - | 13.67 | Ultra-strong base material and TiCN PVD coating for excellent strong blade. For low to medium cutting speed. High tipping resistance. | Planing / Shoulder Cutting / Grooving | 10 stycken |
Stainless Steel / Heat-resistant alloy, titanium alloy | 4 | H490 AN.. 1205…-NTR | 10 | 9.15 | - | IC330 | 0.8 | 3.5 | - | 13.67 | Tough material and new AlTiN PVD coating. Good cut fragment removal. Ideal for stainless steel, heat-resistant alloys, steel allows, and other milling. Also ideal for disconnection and heavy cutting. | Planing / Shoulder Cutting / Grooving | 10 stycken |
Stainless Steel / Heat-resistant alloy, titanium alloy | 4 | H490 AN.. 1205…-NTR | 10 | 9.15 | - | IC380 | 0.8 | 3.5 | - | 13.67 | Tough material and new TiAlN PVD coating. Good cut fragment removal. Ideal for stainless steel, heat-resistant alloys, steel allows, and other milling. Also ideal for disconnection and heavy cutting. | Planing / Shoulder Cutting / Grooving | 10 stycken |
Cast Iron | 4 | H490 AN.. 1205…-NTR | 10 | 9.15 | - | IC5100 | 0.8 | 3.5 | - | 13.67 | The tough base material is coated with new MTCVD and alpha Al2O3 coating. Ideal for gray cast iron high speed milling and provides a long tool life. | Planing / Shoulder Cutting / Grooving | 10 stycken |
Steel / Stainless Steel / Heat-resistant alloy, titanium alloy / High Hardness Material | 4 | H490 AN.. 1205…-NTR | 10 | 9.15 | - | IC808 | 0.8 | 3.5 | - | 13.67 | Tough, ultrafine particulate carbide base material and new TiAlN PVD coating. Favorable cut removal at moderate to high cutting speeds ideal for interrupted cutting and other cutting work under unstable conditions. | Planing / Shoulder Cutting / Grooving | 10 stycken |
Cast Iron | 4 | H490 AN.. 1205…-NTR | 10 | 9.15 | - | IC810 | 0.8 | 3.5 | - | 13.67 | The tough base material is coated with new AlTiN PVD that has excellent oxidation resistance. Recommended for nodular forged milling work under unstable conditions and low to medium cutting speed gray case iron milling. | Planing / Shoulder Cutting / Grooving | 10 stycken |
Cast Iron | 4 | H490 AN.. 1205…-NTR | 10 | 9.15 | - | IC830 | 0.8 | 3.5 | - | 13.67 | The tough base material is coated with new AlTiN PVD that has excellent oxidation resistance. Recommended for nodular forged milling work under unstable conditions and low to medium cutting speed gray case iron milling. | Planing / Shoulder Cutting / Grooving | 10 stycken |
Stainless Steel / Heat-resistant alloy, titanium alloy | 4 | H490 AN.. 1205…-NTR | 10 | 8.9 | - | IC830 | 1 | 3.4 | - | 13.70 | Tough material and new TiAlN PVD coating. Good cut fragment removal. Ideal for stainless steel, heat-resistant alloys, steel allows, and other milling. Also ideal for disconnection and heavy cutting. | Planing / Shoulder Cutting / Grooving | 10 stycken |
Stainless Steel / Heat-resistant alloy, titanium alloy | 4 | H490 AN.. 1205…-NTR | 10 | 8.9 | - | IC830 | 1.2 | 3.2 | - | 13.70 | Tough material and new TiAlN PVD coating. Good cut fragment removal. Ideal for stainless steel, heat-resistant alloys, steel allows, and other milling. Also ideal for disconnection and heavy cutting. | Planing / Shoulder Cutting / Grooving | 10 stycken |
Stainless Steel / Heat-resistant alloy, titanium alloy | 4 | H490 AN.. 1205…-NTR | 10 | 8.60 | - | IC830 | 1.6 | 2.8 | - | 13.70 | Tough material and new TiAlN PVD coating. Good cut fragment removal. Ideal for stainless steel, heat-resistant alloys, steel allows, and other milling. Also ideal for disconnection and heavy cutting. | Planing / Shoulder Cutting / Grooving | 10 stycken |
Stainless Steel / Heat-resistant alloy, titanium alloy | 4 | H490 AN.. 1205…-NTR | 10 | 8.70 | - | IC830 | 2 | 2.8 | - | 13.70 | Tough material and new TiAlN PVD coating. Good cut fragment removal. Ideal for stainless steel, heat-resistant alloys, steel allows, and other milling. Also ideal for disconnection and heavy cutting. | Planing / Shoulder Cutting / Grooving | 10 stycken |
Stainless Steel / Heat-resistant alloy, titanium alloy | 4 | H490 AN.. 1205…-NTR | 10 | 8.60 | - | IC830 | 2.4 | 2.8 | - | 13.70 | Tough material and new TiAlN PVD coating. Good cut fragment removal. Ideal for stainless steel, heat-resistant alloys, steel allows, and other milling. Also ideal for disconnection and heavy cutting. | Planing / Shoulder Cutting / Grooving | 10 stycken |
Stainless Steel / Heat-resistant alloy, titanium alloy | 4 | H490 ANKX..17..-CS | 11.2 | 10.4 | - | IC830 | 0.8 | 4.7 | - | 16.7 | Tough material and new TiAlN PVD coating. Good cut fragment removal. Ideal for stainless steel, heat-resistant alloys, steel allows, and other milling. Also ideal for disconnection and heavy cutting. | Shoulder Grinding | 10 stycken |
Steel / Stainless Steel / Heat-resistant alloy, titanium alloy / High Hardness Material | 4 | H490 ANKX..17..-RM | 11.2 | 10.4 | - | IC808 | 0.8 | 4.7 | - | 16.7 | Tough, ultrafine particulate carbide base material and new TiAlN PVD coating. Favorable cut removal at moderate to high cutting speeds ideal for interrupted cutting and other cutting work under unstable conditions. | Shoulder Grinding | 10 stycken |
Stainless Steel / Heat-resistant alloy, titanium alloy | 4 | H490 ANKX..17..-RM | 11.2 | 10.4 | - | IC830 | 0.8 | 4.7 | - | 16.7 | Tough material and new TiAlN PVD coating. Good cut fragment removal. Ideal for stainless steel, heat-resistant alloys, steel allows, and other milling. Also ideal for disconnection and heavy cutting. | Shoulder Grinding | 10 stycken |
Steel / High Hardness Material | 2 | H490 ANKX… 1706…-FF | 11.7 | 7.8 | - | IC5400 | 1.6 | 4.6 | 2.0 (Note 1) / 15.0 (Note 2) | 16.8 | Highly durable and ultra-fine powderer/ultra-hard base material new MTCVD and alpha Al2O3 coating. Ideal for gray cast iron high speed milling and provides a long tool life. | Shoulder Grinding | 10 stycken |
Stainless Steel / Heat-resistant alloy, titanium alloy | 2 | H490 ANKX… 1706…-FF | 11.7 | 7.8 | - | IC830 | 1.6 | 4.6 | 2.0 (Note 1) / 15.0 (Note 2) | 16.8 | Tough material and new TiAlN PVD coating. Good cut fragment removal. Ideal for stainless steel, heat-resistant alloys, steel allows, and other milling. Also ideal for disconnection and heavy cutting. | Shoulder Grinding | 10 stycken |
Stainless Steel / Heat-resistant alloy, titanium alloy | 4 | H490 ANKX..17.. | 11.2 | 10.4 | - | IC330 | 0.4 | 4.7 | - | 16.7 | Tough material and new TiAlN PVD coating. Good cut fragment removal. Ideal for stainless steel, heat-resistant alloys, steel allows, and other milling. Also ideal for disconnection and heavy cutting. | Shoulder Grinding | 10 stycken |
Stainless Steel / Heat-resistant alloy, titanium alloy | 4 | H490 ANKX..17.. | 11.2 | 10.4 | - | IC830 | 0.4 | 4.7 | - | 16.7 | Tough material and new TiAlN PVD coating. Good cut fragment removal. Ideal for stainless steel, heat-resistant alloys, steel allows, and other milling. Also ideal for disconnection and heavy cutting. | Shoulder Grinding | 10 stycken |
Steel / Cast Iron / Heat-resistant alloy, titanium alloy | 4 | H490 ANKX..17.. | 11.2 | 10.4 | - | IC328 | 0.8 | 4.7 | - | 16.7 | Ultra-strong base material and TiCN PVD coating for excellent strong blade. For low to medium cutting speed. High tipping resistance. | Shoulder Grinding | 10 stycken |
Stainless Steel / Heat-resistant alloy, titanium alloy | 4 | H490 ANKX..17..-NTR | 11.2 | 10.4 | - | IC330 | 0.8 | 4.7 | - | 16.7 | Tough material and new TiAlN PVD coating. Good cut fragment removal. Ideal for stainless steel, heat-resistant alloys, steel allows, and other milling. Also ideal for disconnection and heavy cutting. | Shoulder Grinding | 10 stycken |
Stainless Steel / Cast Iron / High Hardness Material | 4 | H490 ANKX..17.. | 11.2 | 10.4 | - | IC4050 | 0.8 | 4.7 | - | 16.7 | MT CVD coating of Al + TiN on tough welding base material. Having excellent abrasion resistance and tenacity, it is suitable for high feed milling of medium to high cutting speed range. | Shoulder Grinding | 10 stycken |
Cast Iron | 4 | H490 ANKX..17.. | 11.2 | 10.4 | - | IC4100 | 0.8 | 4.7 | - | 16.7 | Highly durable and ultra-hard base material MTCVD AI2O3 coating. | Shoulder Grinding | 10 stycken |
