MISUMIS START
Machining tools
Turning Tools
Holding Tools for I.D. Tuning
Holder for Inner Diameter Machining (with Hole for Cutting Oil) TGIR/L-C (Top Grip)

Filtreringsvillkor

Minimum Machining Diameter
- 20.5
- 25
- 32
- 32.5
- 42.0
- 57
Selfishly
- Right-hand
- Left-hand
Full length L1
- 150
- 180
- 200
- 220
- 300
Shank diameter
- 16
- 20
- 25
- 32
- 40
Protrusion length (L/D)
- 5.5
- 8
- 8.5
- 11
- 17.5
Dimension L1(mm)
- 25
- 32
- 40
- 50
- 60
Dimension F(mm)
- 12.0
- 14.2
- 18.8
- 19.5
- 25.5
- 30.4
- 34.4
w tip width(mm)
- 3
- 4-5
- 6-6.35
Compatible Tip
Type
- TGIR/L-C
Uppskattade leveransdagar
- Alla
- Inom 6 arbetsdagar
- Inom 8 arbetsdagar

Holder for Inner Diameter Machining (with Hole for Cutting Oil) TGIR/L-C (Top Grip)

Holder for Inner Diameter Machining (with Hole for Cutting Oil) TGIR/L-C (Top Grip)

Artikelnummer:

Ej färdigt: 14 kandidater hittades.

Artikelnummerlista
Detaljerad information

Artikelnummerlista

Antal artiklar

Artikelnummer

Minimum Machining Diameter

Selfishly

Full length L1

Shank diameter

Protrusion length (L/D)

Dimension L1

(mm)

Dimension F

(mm)

w tip width

(mm)

Compatible Tip

Wrench

Screw

Seal

Seal Screw

Minsta beställningsantal

20.5	Left-hand	150	16	5.5	25	12.0	3	TGMF3	T-20/5	SR-76-1400	PL-16	M6	1 stycken
25	Left-hand	180	20	5.5	32	14.2	3	TGMF3	T-20/5	SR-76-1400	PL-20	M6	1 stycken
32	Left-hand	200	25	8	40	18.8	3	TGMF3	HW 4.0	SR-M5X16 DIN 912	PL-25	R1/8"	1 stycken
32.5	Left-hand	200	25	8.5	40	19.5	4-5	TGMF4 TGMF5 TGMP5	HW 4.0	SR-M5X16 DIN 912	PL-25	R1/8"	1 stycken
42.0	Left-hand	220	32	11	50	25.5	4-5	TGMF4 TGMF5 TGMP5	HW 5.0	SR-M6X20 DIN 912	PL-32	R1/8"	1 stycken
57	Left-hand	220	32	17.5	50	30.4	6-6.35	TGMF6	HW 5.0	SR-M6X20 DIN 912	PL-32	R1/8"	1 stycken
57	Left-hand	300	40	17.5	60	34.4	6-6.35	TGMF6	HW 5.0	SR-M6X25 DIN 912	PL-40	R1/8"	1 stycken
20.5	Right-hand	150	16	5.5	25	12.0	3	TGMF3	T-20/5	SR-76-1400	PL-16	M6	1 stycken
25	Right-hand	180	20	5.5	32	14.2	3	TGMF3	T-20/5	SR-76-1400	PL-20	M6	1 stycken
32	Right-hand	200	25	8	40	18.8	3	TGMF3	HW 4.0	SR-M5X16 DIN 912	PL-25	R1/8"	1 stycken
32.5	Right-hand	200	25	8.5	40	19.5	4-5	TGMF4 TGMF5 TGMP5	HW 4.0	SR-M5X16 DIN 912	PL-25	R1/8"	1 stycken
42.0	Right-hand	220	32	11	50	25.5	4-5	TGMF4 TGMF5 TGMP5	HW 5.0	SR-M6X20 DIN 912	PL-32	R1/8"	1 stycken
57	Right-hand	220	32	17.5	50	30.4	6-6.35	TGMF6	HW 5.0	SR-M6X20 DIN 912	PL-32	R1/8"	1 stycken
57	Right-hand	300	40	17.5	60	34.4	6-6.35	TGMF6	HW 5.0	SR-M6X25 DIN 912	PL-40	R1/8"	1 stycken

Enhetspris (exklusive MOMS)(Enhetspris inklusive MOMS)	Standardavsändningsdatum

276.91 € ( 329.52 € )	8 arbetsdagar
312.31 € ( 371.65 € )	8 arbetsdagar
345.99 € ( 411.73 € )	8 arbetsdagar
345.99 € ( 411.73 € )	8 arbetsdagar
432.33 € ( 514.47 € )	8 arbetsdagar
432.33 € ( 514.47 € )	8 arbetsdagar
515.22 € ( 613.11 € )	8 arbetsdagar
276.91 € ( 329.52 € )	8 arbetsdagar
312.31 € ( 371.65 € )	8 arbetsdagar
345.99 € ( 411.73 € )	6 arbetsdagar
345.99 € ( 411.73 € )	8 arbetsdagar
432.33 € ( 514.47 € )	8 arbetsdagar
432.33 € ( 514.47 € )	8 arbetsdagar
515.22 € ( 613.11 € )	8 arbetsdagar

Detaljerad information

Grundläggande information

Grundläggande information

[Features] A holder for machining inner diameters with a minimum machining diameter of 20.5 to 57 mm and a projection length of 5.5 to 17.5 mm.