FX-MG-CS X 90 Hole Chamfering, 3-Flute Countersink, FX Coating Carbide 90° Series

Volume Discount

High-speed cutting is possible compared to conventional products, and a wide range of processing such as deburring and chamfering can be performed, resulting in a beautiful finished surface. High-speed steel series and carbide series are available.

Part Number

Once your search is narrowed to one product,
the corresponding part number is displayed here.

Product specification
Part Numbers
Catalog

Data to be displayed: 30; 45; 60

Part Number
FX-MG-CS-6.3X90
FX-MG-CS-8.3X90
FX-MG-CS-10.4X90
FX-MG-CS-12.4X90
FX-MG-CS-16.5X90
FX-MG-CS-20.5X90

Standard Unit Price	Minimum order quantity	Volume Discount	Standard Shipping Days ?	Tool Diameter (D) (mm)	Large End Diameter (mm)	Tool No.	Shank diameter (d) (mm)	Tip diameter (mm)	Overall Length (mm)	Length of Taper part (mm)	Nominal
119.56 €	1	Available	6 Days	1	6.3	9149063	6	1	55	(2.65)	6.3×6×2×55
134.56 €	1	Available	6 Days	2.5	8.3	9149083	6	2.5	55	(2.9)	8.3×6×2.5×55
172.33 €	1	Available	6 Days	2.6	10.4	9149104	8	2.6	65	(3.9)	10.4×8×3×65
176.78 €	1	Available	6 Days	2.5	12.4	9149124	10	2.5	65	(4.95)	12.4×10×4×65
209.54 €	1		6 Days	3.1	16.5	9149165	10	3.1	70	(6.7)	16.5×10×4×70
237.31 €	1		6 Days	3.8	20.5	9149205	12	3.8	70	(8.35)	20.5×12×5×70

Products homepage

Basic information

Application	Centering (Positioning) / Hole Chamfer / Chamfering/Horizontal / V Groove	Tip angle (θ)	90	work material	General steel / Quenched and tempered steel / High hardness steel / Cast Iron / Aluminum / Copper / Graphite / Resin
Single blade, two blades	Single blade	Peripheral Blade Y/N	N/A	Tool Material Type	Carbide
Coating Y/N	Available	Coating Type	TiAlN