Air Nipper Blades

AJ/RAJ/AJB Straight Blades for Plastic

Product Information

AJ/This is a vertical set of blades with an unbeveled cutting edge. You can apply it at a right angle to the gate.
RAJ/This is a reverse bevel of AJ type.
AJB/ This has a brazed carbide tip, suitable for cutting hard plastic or plastic containing glass fiber.

Specifications

AJL Straight Long Blades for Plastic

Product Information

AJL/This is a long type set of straight blades. This is useful when there is distance between the nippers and the gate cut portion of the workpiece.

Specifications

AJT Thin, Straight Blades for Plastic

Product Information

AJT/This is a set of straight blades with a thin cutting edge.
It can cleanly trim cross sections without remnants.

Specifications

AD Lift Blades for Plastic

Product Information

AD/This is used for batch processing of the three-dimensional gate such as ride gate.

Specifications

AH/RAH Crank Blades for Plastic

Product Information

AH/This is a set of blades with a clamped cutting edge for plastic. It is effective when there are obstructions or the gate is narrow
RAH/This is a reverse bevel of AH type used when installing the main units face-to-face.

Specifications

NK10AJ Thrust-Cut Air Nipper Blades

Product Information

This is a dedicated set of blades for GT-NK10. Suitable for processing of film gates attached to robot hands.

Specifications

NM Blades

Product Information

・Ideal for around-the-clock operations
・Semi-permanent magnetic force
・Compatible with our standard nipper bodies
NM blades eliminate trouble caused by Spring breakage.
Compliant with your VESSEL current air nippers.
Spring replacement is no longer required as the neodymium magnet works semi-permanently.

Specifications

AP For Plastic

Product Information

AP/This is a standard set of blades used to cut plastic. A broad, gentle curve is provided in the cross section for gate processing where the cut end must not be left. (The cutting edge is curved.)

Specifications

AE Nipping Blades for Plastic

Product Information

AE/Used for processing plastic gates such as ride gates and discard gates.

Specifications

AJ Thin, Straight Blades for Plastic

Product Information

AJ/This is a set of vertical blades with an unbeveled cutting edge for plastic. You can apply it at a right angle to the gate.

Specifications

AJL Quasi-Standard Products / Straight Long Blades for Plastic

Product Information

AJL/This is a long type set of straight blades. This is suitable when there is distance between the nippers and the gate cut portion of the workpiece. N30AJL163 is useful for wide gate processing.

Specifications

PF Flat Blades for Plastic

Product Information

PF/This is a set of blades for cutting the cut end flat for plastic. A large R is provided in the cross section for gate processing where the cut end must not be left.

Specifications

AH Quasi-Standard Products / Crank Blades for Plastic

Product Information

AH/This is a set of blades with a crank cutting edge for plastic. It is effective when there are obstructions or the gate is narrow.

Specifications

AMR/AM Quasi-Standard Products / Laterally Facing Blades for Plastics

Product Information

AMR/AML This is a set of blades for plastic where the ML cutting edge is bent 90 degrees. It is useful when restricted to confined spaces hard for the nipper to get into.

Specifications