Filtreringsvillkor

Application
- Probe
Product Type
- Flat Probe
Material
- Steel
Additional Spec
- Bracket
- Jeweled Bearing, Shockproof
Applicable Gauge
- LGF-Z with reference Point, LG100 with connector adapter plug 21HZA196
Calculation Function (with formula)
- Yes
Carbide Stylus Tip ø2 mm No.
- 103011
- 131324
- 137557
Contact Point
- Thread M 1.7 x 0.35
- Carbide tipped, thread: M 2.5 x 0.45 mm
Continuous Dial
- Yes
Counting Direction Switchable
- Yes
Cushioned End Point
- Yes
Dial Reading
Digital / Analog
- Analog
Display
- D EV Unit: red LED display, 6 digit plus sign8 digit internal to EV-Counter
Environmental Conditions
- 0°C to 40°C (20 % to 80 % relative humidity, no condensation) °C
External Hold
- Yes
External PRESET / ZERO
- Yes
Functions
Gauge Inputs
- 6
Graduation(mm)
- 0.002
- 0.01
Graduation(mN)
- 5
H MPE (Hysteresis)(µm)
- 2
- 3
- 4
- 5
Inch-Metric
- Metric
Input Signal Type
- Differential square wave with reference Point
MAX / MIN / Difference Measurement
- Yes
Max. Input frequency
- 1,25 MHz (2-phase square wave), response speed depends on gauge specification.Max.counting speed: 5MHz
mm / Inch Switching
- Yes
MPE Any 1/10 Revolution(µm)
- 7
MPE Any 1/2 Revolution(µm)
- 3
- 8
- 11
MPE Any 10 Scale Divisions(µm)
- 2
- 5
MPE Any 1 Revolution(µm)
- 10
- 12
MPE Measuring Range(µm)
- 3
- 5
- 10
- 16
- 25
PRESET
- Yes
R MPE (Repeatability)(µm)
- 1
- 3
Range(mm)
- 0.2
- 0.5
- 1
- 1.6
- 30
Range(N)
- 0.01-0.1
Range Per Rev.(mm)
- 1
RS Link
- Yes
Stem(mm)
- 4/8
- 8
Tolerance Judgement Display
- LED display (3 steps: Amber, Green, Red)
Type
- Full set
ZERO SET
- Yes
Diameter(mm)
- 5
- 10
Type
- 101117
- 131
- 21AAA341
Uppskattade leveransdagar
- Alla
- Inom 5 arbetsdagar
- Inom 60 arbetsdagar

Contact Element Flat, Steel

Katalog

Artikelnummer:

Ej färdigt: 10 kandidater hittades.

Artikelnummerlista
Katalog

Artikelnummerlista

Antal artiklar

Artikelnummer

Relaterat

Application

Product Type

Material

Additional Spec

Applicable Gauge

Calculation Function (with formula)

Carbide Stylus Tip ø2 mm No.

Contact Point

Continuous Dial

Counting Direction Switchable

Cushioned End Point

Dial Reading

Digital / Analog

Display

Environmental Conditions

External Hold

External PRESET / ZERO

Functions

Gauge Inputs

Graduation

(mm)

Graduation

(mN)

H MPE (Hysteresis)

(µm)

Inch-Metric

Input Signal Type

MAX / MIN / Difference Measurement

Max. Input frequency

mm / Inch Switching

MPE Any 1/10 Revolution

(µm)

MPE Any 1/2 Revolution

(µm)

MPE Any 10 Scale Divisions

(µm)

MPE Any 1 Revolution

(µm)

MPE Measuring Range

(µm)

PRESET

R MPE (Repeatability)

(µm)

Range

(mm)

Range

(N)

Range Per Rev.

(mm)

RS Link

Stem

(mm)

Tolerance Judgement Display

Type

ZERO SET

Diameter

(mm)

Mass

(g)

Flatness

(μm)

Minsta beställningsantal

Data sheet	-	-	-	-	-	-	137557	Thread M 1.7 x 0.35	-	-	-	-	Analog	-	-	-	-	Basic set	-	0.01	-	3	Metric	-	-	-	-	-	-	5	-	5	-	3	0.5	-	-	-	-	-	-	-	-	53	3	1 stycken
Data sheet	-	-	-	Bracket	-	-	131324	Thread M 1.7 x 0.35	-	-	-	0-25-0	Analog	-	-	-	-	Full set	-	0.01	-	4	Metric	-	-	-	-	-	-	5	-	10	-	3	0.5	-	-	-	4/8	-	Full set	-	-	45	3	1 stycken
Data sheet	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	5	-	-	-	-	-	-	-	-	-	-	-	-	-	-	0.01-0.1	-	-	-	-	-	-	-	-	3	1 stycken
Data sheet	-	-	-	-	-	-	103011	Thread M 1.7 x 0.35	-	-	-	0-100-0	Analog	-	-	-	-	Basic set	-	0.002	-	2	Metric	-	-	-	-	-	3	2	-	3	-	1	0.2	-	-	-	8	-	-	-	-	41	3	1 stycken
Data sheet	Probe	Flat Probe	-	-	-	-	-	Thread M 1.7 x 0.35	-	-	-	-	Analog	-	-	-	-	Plus set	-	0.01	-	4	Metric	-	-	-	-	-	8	5	10	16	-	3	1.6	-	-	-	4/8	-	-	-	-	48	5	1 stycken
Data sheet	-	-	-	-	LGF-Z with reference Point, LG100 with connector adapter plug 21HZA196	Yes	-	-	-	Yes	-	-	-	D EV Unit: red LED display, 6 digit plus sign8 digit internal to EV-Counter	0°C to 40°C (20 % to 80 % relative humidity, no condensation) °C	Yes	Yes	-	6	-	-	-	-	Differential square wave with reference Point	Yes	1,25 MHz (2-phase square wave), response speed depends on gauge specification.Max.counting speed: 5MHz	Yes	-	-	-	-	-	Yes	-	-	-	-	Yes	-	LED display (3 steps: Amber, Green, Red)	-	Yes	-	-	5	1 stycken
Data sheet	-	-	-	Jeweled Bearing, Shockproof	-	-	-	Carbide tipped, thread: M 2.5 x 0.45 mm	Yes	-	Yes	±0-100	Analog	-	-	-	-	ISO type	-	0.01	-	5	Metric	-	-	-	-	7	11	-	12	25	-	3	30	-	1	-	8	-	-	-	-	152	5	1 stycken
Data sheet	-	-	Steel	-	-	-	-	-	-	-	-	-	-	-	-	-	-	A: M2.5 x 0.45	-	-	-	-	Metric	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	10	-	5	1 stycken
Data sheet	Probe	Flat Probe	Steel	-	-	-	-	-	-	-	-	-	-	-	-	-	-	A: M2.5 x 0.45	-	-	-	-	Metric	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	5	-	3	1 stycken
Data sheet	-	-	-	-	-	-	-	Thread M 1.7 x 0.35	-	-	-	-	Analog	-	-	-	-	Plus set	-	0.01	-	4	Metric	-	-	-	-	-	8	5	-	10	-	3	1	-	-	-	4/8	-	-	-	-	45	3	1 stycken

Enhetspris (exklusive MOMS)(Enhetspris inklusive MOMS)	Standardavsändningsdatum

102.00 € ( 121.38 € )	5 arbetsdagar
387.00 € ( 460.53 € )	5 arbetsdagar
367.00 € ( 436.73 € )	5 arbetsdagar
46.00 € ( 54.74 € )	60 arbetsdagar
46.00 € ( 54.74 € )	60 arbetsdagar
83.00 € ( 98.77 € )	60 arbetsdagar
92.00 € ( 109.48 € )	60 arbetsdagar
93.00 € ( 110.67 € )	5 arbetsdagar
60.00 € ( 71.40 € )	5 arbetsdagar
47.00 € ( 55.93 € )	60 arbetsdagar

Katalog

Products homepage

Katalog (2-sidigt uppslag)