Square Connectors（Connector Shape：Square shape）
| Shipping Days |
|
|---|
?* Information on days to ship and prices
-
PCR Series
HONDA TSUSHIN KOGYO
Bellows, high-density contact type and accessories are, as with the PCS series, applicable to various uses.
[Features]
· A wide range of cores of 20 to 96 are available from the board to the cable.
· For EMI measures other than FCC.
· A wide range of cores of 20 to 128 are available from board to board.
· Products enabling live wire connection (three steps) are available.
· Parallel mating is feasible through a housing guide mechanism and the structure prevents shorting between adjacent contacts.
· Ideal for connection to horizontal, parallel, and vertical backs.- Volume Discount
Configure nowStarting from∗ ： 4.64 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
57 Series Soldering / DIP-Type Connector
FUJIKURA (DDK)
A 2.159-mm pitch ribbon-type connector for soldering. These are the core of the 57 family of connectors, which are available in 5 types.
[Features]
■ This 57 Series forms the core of the 57 family of DIP connectors. The following 5 types are available.
· 57-10 type (unit connection plug).
· 57-20 type (unit connection receptacle).
· 57-30 type (plug with straight hood for cables).
· 57-40 type (panel receptacle with locking spring).
· 57-60 type (cable relay receptacle).- Volume Discount
Configure nowStarting from∗ ： 5.41 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
SUMICON 1600 Series Multi-Contact Rectangular Connector【1-100 Pieces Per Package】
HIROSE ELECTRONIC
A rectangular multi-contact connector manufactured using a unique HIROSE design.
[Features]
· Nine contact configurations (8, 12, 16, 20, 24, 28, 34, 45, 60) are available. Solder type, wrapping type and crimp type connector units are available.
· Accessories include C case, CA case, CBA case, ST stopper, STA stopper, STB stopper, etc. that can be combined for use in a wide range of applications.
· The connector unit and accessories (cases, stoppers) are completely separate in the SUMICON 1600 series. This means that they can be combined for a variety of uses as well as enabling easier wiring connections.
· These connectors are specified in the NTT specifications, “Spec. No. 1931.”- Volume Discount
Configure nowStarting from∗ ： 0.55 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Misumi, Waterproof, E-Model Connector (Screw Wire Connection)
MISUMI
[Features] MIAutomatic SteelI's original, low-cost, environmentally resistant and waterproof E-type plug. Thanks to the cable's screw connection, it can be easily connected with a slotted screwdriver without the need for special tools. The screw connection is equipped with a contact. Please confirm the type and plug or socket before ordering.- Volume Discount
- Order quantities extended (D-JIT)
- UL
- IP65
- For Power Supply
- For Signal
- Connection between Boards
- Connection in Boards
- Screw Type
- Insertion
- 2DCAD
- Silver-Plated
- 2D CAD data available
Configure nowStarting from∗ ： 12.29 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
PCS Series Cases
HONDA TSUSHIN KOGYO
PCS series case.
[Features]
• Board-to-cable cases are available for 20 - 96 contacts: Pressure contact connection is standard for cables (AWG #28 or 30), reducing wiring labor.
· A soldered type is also available.
• FCC and other EMI shielding: Sturdy construction is well suited for interfaces.
· Quick lock using metal lock spring.
· Models supporting panel relays are also available.
· Accessories for preventing incorrect insertion are also available.
• Wide range (34 - 150 contacts) of board-to-board connections available: Design minimizes insertions and extractions, even with a high number of contacts.
• Housings are structured so that all cleaning fluid drains out when cleaning away flux (mold-type male connectors).- Volume Discount
Configure nowStarting from∗ ： 8.79 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
D-Sub, D02, D02-M15 Series
JAPAN AVIATION ELECTRONICS(JAE)
A small, lightweight, highly reliable connector for making every type of electronic device smaller and more dense to support advanced features.
[Features]
・The D-sub connector is becoming the standard with its combination of pin and socket connector types.
・Interchangeable with different connector types and commonly used accessories.
・The shell joint shape has polarity, fully preventing accidental reverse insertion.
・The DO2 series is a high-density mounting connector with approximately twice as many contacts inside the same shell size as the D-sub.
・The outer appearance is short and compact. The contact and insulation material is contained in a hard, steel shell.
・There are 5 shell sizes (E, A, B, C, and D), which come with 9, 15, 25, 37, and 50 cores. Special arrays with coaxial and high-current contacts are also available.- Volume Discount
Configure nowStarting from∗ ： 1.57 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
MR Series Case
HONDA TSUSHIN KOGYO
Case for the MR series.
[Features]
· Dual screw and a spring lock mechanism that can withstand any shock.
· Dust-proof mechanism with excellent environmental resistance.
· Optimal for device miniaturization via improvement of robustness, compactness, weight and density.
· A relay type case is also provided- Volume Discount
Configure nowStarting from∗ ： 3.45 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
![[Enclosure]C Type IP66, Rotary Lever Series](//content.misumi-ec.com/image/upload/f_auto,t_product_view_b/v1/p/jp/product/series/222302286007/222302286007_003_20230801115838.jpg)
[Enclosure]C Type IP66, Rotary Lever Series
ILME
Ilme's traditional lever C type
It is a standard enclosure of Ilme connector.
A uniquely developed rotary lever enables smooth attachment and detachment.
Stainless steel levers and springs ensure safe and secure fitting and airtightness.
The manufacturer will flexibly respond to various on-site needs with the manufacturer's wide lineup.
Further notes: It is a slim type that contributes to the miniaturization of equipment and supports all connection types.- Volume Discount
Configure nowStarting from∗ ： 6.26 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Han Series Hood / Housing
HARTING
Han Series Hoods/Housings.
[Features]
· Shielded through various locking mechanisms to provide high reliability suitable for industrial use.
· Superior nature of materials and design have been recognized in the past 10 years.
· HanA and HanB products have become a standard in the industrial field.
[Applications]
· Ideal for industrial use.- Volume Discount
Configure nowStarting from∗ ： 5.07 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
MR Series
HONDA TSUSHIN KOGYO
Small-type/multi-pin connector developed for use with data devices which uses wide-type terminals with exceptional reliability.
[Features]
· Dual screw and a spring lock mechanism that can withstand any shock.
· Dust-proof mechanism with excellent environmental resistance.
· Optimal for device miniaturization via improvement of robustness, compactness, weight and density.
· A relay type case is also provided- Volume Discount
Configure nowStarting from∗ ： 1.83 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
17JE Series Soldering Type Connector
FUJIKURA (DDK)
17 Series (Dsub type) soldering connection type square connector for cable equipment.
[Features]
· Square connector for solder wire connections, with solder cup type contact.
· Ni plating is used for the metal shell surface treatment, and the pin connector is bead treated.
· The hood is metalized plastic, which provides weight reduction and a high shielding effect.
· Either the pin connector or the socket connector can be selected.
· There are 4 shell sizes: 9, 15, 25, and 37. The core counts are 9 cores, 15 cores, 25 cores, and 37 cores.
· The cable and plug wire connection can be shielded with a metalized hood, which is effective as an EMI measure.
[Applications]
· Can be used as an interface for equipment and devices. Optimal for use on twisted wire of AWG22 or less.- Volume Discount
- 2D CAD data available
Configure nowStarting from∗ ： 4.30 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
HDC HE Series
WEIDMUELLER
Insert for industrial plug-in connectors, consisting of contact element and insulating body.- Volume Discount
Configure nowStarting from∗ ： 10.25 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
PCR Series Case
HONDA TSUSHIN KOGYO
This is a PCR series case.
[Features]
· A wide range of cores of 20 to 96 are available from the board to the cable.
· For EMI measures other than FCC.
· A wide range of cores of 20 to 128 are available from board to board.
· Products enabling live wire connection (three steps) are available.
· Parallel mating is feasible through a housing guide mechanism and the structure prevents shorting between adjacent contacts.
· Ideal for connection to horizontal, parallel, and vertical backs.- Volume Discount
Configure nowStarting from∗ ： 3.73 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
MX34 Series
JAPAN AVIATION ELECTRONICS(JAE)
These are non-waterproof, small-type board-to-cable connectors developed mainly for on-board use.
[Features]
・A small-type/high density connector with abundant variations.
A small-type/high density connector with 2.2 mm (8 turns = 4 mm) contact pitch and 025 tab size.
・Single-row / two-row types are available supporting 3–40 pins.
・Furthermore, in addition to the through-hole type, circuit board pin connector, the SMT type (straight, 20/32 pins) is also available. This type is compatible with automatic mounting, allowing for a variety of connection formats.
・Reliable mating due to mechanical locking structure.
・The mechanical locking structure is resistant to vibration and pulling. Simply inserting the plug creates a clicking sound that ensures the lock is secured. This allows users to confirm proper mating even when visibility is restricted.
・Double-layered stop construction to prevent contact removal.
・Preserving the contact inside the housing involves a double-layer construction consisting of a primary stopping housing lance and a secondary, internal preset, socket housing retainer. This effectively prevents disconnection through vibrations and pulling.
・ Furthermore, the retainer is constructed so that its locking position cannot be set if the contact is not fully inserted. This allows for the detection of semi-inserted contacts.
・The socket lock is protected by a unique housing structure.
・A bridge is installed around the upper portion of the clock lever in the socket housing. This prevents warping and other lock lever damage when an external load is applied when cable harnesses are bundled together.
・High-reliability socket contact
・The contact is a box-style unit that is resistant to the effect of external power fluctuations, etc.
・The contacts have a double layer coil construction and are strongly resistant against prying. This is a highly reliable model that ensures a stable connection.
· Crimped type for easy wire connection.- Volume Discount
Configure nowStarting from∗ ： 1.26 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
MIXO Modular Insert & Contact
ILME
[Features]
· MIXO.
· MIXO modular inserts and contacts.
· Supports large currents up to 200 A, high voltage up to 5, 000 V, high density, air piping, LANs, and USBs.
· Supports optical fiber, coaxial, and Dsub9Pin connectors.- Volume Discount
Configure nowStarting from∗ ： 2.97 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Board-to-Cable Connector with 1.25-mm Pitch - DF13 Series【1-10,000 Pieces Per Package】
HIROSE ELECTRONIC
Connector for board-to-cable connection with 1.25-mm pitch. Choose from a number of variations from 2–40 pin, straight-mount, right-angle mount, DIP, and SMT.
[Features]
· Small.
· A low-profile design with a mounting height of 5.8 mm. (The SMT mounting is a straight type, the DIP type is a straight 5.3-mm, and the right-angle type is 3.6-mm.)
· Multipole
· The dual-row type is a multipole connector with up to 40 pins. It is a high-density connector with a surface area of 30% compared to the single-row type.
· Supports automatic mounting.
· The header is available with a suction surface that supports vacuum suction . Therefore, automatic mounting using embossed packing is possible.
· Complete basic functionality despite compact form factor.
· The header includes a box structure to prevent twisting and ensure incorrect insertion is completely prevented.
· Additionally, the Surface Mount (SMT) header is fitted with a reinforcement bracket to prevent solder from peeling.
In-stock made-to-order products cannot be returned or canceled. Thank you for your understanding.- Volume Discount
Configure nowStarting from∗ ： 0.14 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
D-Sub Connector Plug Cases (EMI Shielded), CTH Series
HIROSE ELECTRONIC
These are EMI-shielded plug cases for D-sub connectors. • Because the ABS resin is plated, the connectors are lightweight, sturdy, and provide improved electromagnetic shielding.
[Features]
· Because the lock mechanism is a screw type mechanism it is rugged and reliable.
· Because the material properties call for plating a tough ABS resin, the resin is lightweight, solid, and provides an improved electromagnetic wave shielding effect.
· In order to improve the shield effect, the cable clamp is secured using 2 types of clamps on the shield part and the clamp has a configuration for pinching the plug cases together.
• Use screws to ground the drain wire of the cable with a clamp.
• Easily incorporated using solder (HD type), pressure contact (FD*D type) or crimping (CD type).
• For FD*D, however, wire a fused I/O cable when using the case.
• CTH-type plug cases use UL94HB ABS resin and the plating conforms to the UL746C standard.- Volume Discount
Configure nowStarting from∗ ： 4.59 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
D-Sub Connector (Solder Connection Type), HD Series
HIROSE ELECTRONIC
A solder connection type D-sub connector. Terminal connection portion has a solder cup for the easy attachment of every cable type.
[Features]
· Small and lightweight connector due to metal shell.
· The solder attachment side has a solder cup construction for easy soldering. It is also optimal for wires up to a maximum size of AWG#20.
· The insulation material is heat/chemical resistant and uses the excellent PBT resin (UL94V-O) containing glass.
· CTF, CTH, and other plug case types can be used. Straight dip (SD type), right angle dip (RD type), and ribbon pressure (FD type) connections can be used.- Volume Discount
Configure nowStarting from∗ ： 3.11 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
MX23A Series, Contact
JAPAN AVIATION ELECTRONICS(JAE)
[Features]
· A small low-profile connector, which can be widely used in vehicles, motor bikes and other types of waterproof equipment.- Volume Discount
Configure nowStarting from∗ ： 6.71 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
CK / CKS Small Screw Type and Spring Type 10A / 250 V Insert
ILME
CK / CKS Small screw type / spring type, 10A / 250 V, Insert
[Features]
・CK/CKS.
・Small screw type / spring type.
▪ 10A/250 V insert- Volume Discount
Configure nowStarting from∗ ： 7.00 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
D-Sub Connectors XM3-L / XM2-L / XM4K / XM4L
OMRON
[Features]
・ This D-sub connector series has been renewed with lead-free compatible products.
・ The fastening screw diameter can be identified from its external appearance.
・ A solution to problems associated with combining fasteners has been found.
・ Shielded connectors for EMI countermeasures.
▪ This is a UL standard (File No.E103202) certified product (except for XM4Z type).- Volume Discount
Configure nowStarting from∗ ： 6.20 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Configure now
Starting from∗ ： 1.56 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Misumi, Waterproof, E-Model Connector (Crimp Wire Connection)
MISUMI
[Features] MIAutomatic steelI's original, low cost, environmentally resistant and waterproof E-type connector. It is a highly reliable crimp connection that can reduce working time. Fully compatible with major connector manufacturers' products. Please check the plug or socket before ordering.- Volume Discount
- UL
- IP65
- For Power Supply
- For Signal
- Connection between Boards
- Connection in Boards
- Screw Type
- Insertion
- 2DCAD
- Silver-Plated
- 2D CAD data available
Configure nowStarting from∗ ： 11.75 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
HDC HA Series
WEIDMUELLER
Insert for industrial plug-in connectors, consisting of contact element and insulating body.- Volume Discount
Configure nowStarting from∗ ： 7.48 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
HDC-KIT-HE Series
WEIDMUELLER
Industry plug-in connector set consisting of insert, enclosure and cable gland.Configure nowStarting from∗ ： 83.02 € Min. Shipping Days ： 4 Days *Unit price with basic configuration
-
DF11 Series 2‑mm Grid Double-Row Connector (UL / CSA Standard Certified Product)【1-500 Pieces Per Package】
HIROSE ELECTRONIC
[Features]
· The contact configuration has been condensed into 2 rows with a 2-mm pitch and 5-mm width.
· Allows for twice the number of signals with the same amount of space as a conventional 2‑mm pitch single-row connector.
· Available with either crimped or IDC contacts. Board-to-cable, in-line and board-to-board connector types are also available, enhancing board design flexibility.
· Choose from gold or tin plating to match application. SMT-compatible products are also available.
· Accommodates 22 AWG to 30 AWG wires even with a compact 2‑mm double-row design.
· Reduce man-hours and eliminate manual work processes for easy wiring by using a fully-automatic IDC machine, even for tedious multi-harnessing (branch wire connections).
[Applications]
· For all types of OA equipment, including copy machines and printers.- Volume Discount
Configure nowStarting from∗ ： 0.06 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Half-Pitch I / O Connector (for Fanuc Servo Amps), FI Series
HIROSE ELECTRONIC
This is a Fanuc CNC and servo I/O connector. Selectable between press-weld connections and solder connections.
[Features]
・Terminal device is effectively made smaller with the 1.27 mm connector space pitch.
・Aversion to prying and soft insertion/extraction is achieved with a ribbon-type terminal construction.
・The case is split in the center of the cable guide opening and integrated with 4 fixing hooks for easy work.
・ The lock mechanism utilizes a single-action lock format for easy attachment and detachment.
・In addition to the easy-to-use pressure-type connection, there is also a solder type for making connections with every other type of wire.- Volume Discount
Configure nowStarting from∗ ： 4.07 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Rack and Panel Connector, QR / P6 Series
HIROSE ELECTRONIC
Rectangular multipolar racks with plug-ins connector/panel connector QR/miniaturization of P1/Implementation of high density. • Small design crimp terminals divided for power supplies and signals with guide pins and insulation in a single body shape.
[Features]
· The terminals have a smooth insertion and removal feel, stable contact pressure is achieved by point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.
· The terminals are made compact by segregating according to those for power and those for signals.
• The signal terminal pitch inside the housing is 2.54 mm, and the 2 poles opposite each other on one side are distributed with 6.9-mm pitches for sufficient durability to withstand high voltage, so these units can be used for power supplies.
• In addition, the insulation is a flame retardant material (UL9V-0).
• The small design features guide pins and insulation joined in a single body shape.
• Mounting to the panel or the rack uses a stepped screw system to fix the product in place, allowing for comfortable insertion and removal operations.
• The female-type housing uses a mating surface deeper than the contact point for female terminals, for a structure with finger testing (compliant with UL standard 1950) capabilities.
• This product has obtained UL, CSA, and TUV certifications.- Volume Discount
Configure nowStarting from∗ ： 2.40 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Rack and Panel Connector, QR / P Series【1-100 Pieces Per Package】
HIROSE ELECTRONIC
Plug-in connection rack/panel connector. Connects and disconnects the power supply and signal circuit between the unit and the rack. Crimp terminals have a shared ribbon shape form for both male and female models.
[Features]
· The terminals have a smooth insertion and removal feel, and stable contact pressure is achieved by point and blade contact, and there is some flexibility for the width corresponding to the variation in the connector connection length unique to the plug-in connection.
• Through the utilization of a shared form for male and female terminals, wire connections have improved workability and the terminals themselves have some flexibility.
• For each number of pins, the terminal position inside the housing puts some distance between the other terminals at the 2 opposite pins on both sides (4 pins total), and this distance ensure sufficient durability to withstand high voltage, so these products can be used for power supplies.
• In addition, the insulation is a flame retardant material (UL9V-0).
• Guide pins are made of metal for the durability to withstand coupling shocks.
• Products mount to the panel or rack fixed in place through a floating bushing system, allowing for comfortable insertion and removal operations.- Volume Discount
Configure nowStarting from∗ ： 0.50 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
MX31 Series
JAPAN AVIATION ELECTRONICS(JAE)
The number of pins in these connectors has increased along with the greater role of electronic control in automobiles. In addition, this non-waterproof, high-density type connector fulfills the need for a small and lightweight product.
[Features]
[High-density implementation achieved with a large number of pins]
· These composite-type connectors include both signal (2.2 A) and power (5.7 A) internal circuits in the same connectors. These four-row type connectors are small, highly dense, and include a large number of pins with a 2.2 mm contact pitch (for signals), 3.2 mm contact pitch (for power), and up to a maximum of 135-pin connectors. Multiple socket connectors are combined together on the wire side for each single pin header on the circuit board side.
[Mechanical lock structure ensures secure fitting]
· The mechanical lock structure protects against vibrations and pulling. A distinct click sound helps confirm that secure fitting has occurred.
[Double locking structure reliably prevents loss of contact]
· Contact with the socket housing is maintained via a housing lance and an internal retainer contained in the housing. This double locking structure, which locks at two locations, reliably prevents loss of contact due to vibration or pulling.
· The retainer's structure ensures that a contact cannot be set into the locking position unless it is completely inserted. This makes it possible to detect partial insertion of contacts.
[Low insertion force structure with easy insertion and extraction]
· A low insertion force type structure requiring 70 N or less of force per socket housing to achieve insertion makes insertion and extraction easy.
[Tin and gold plating are available for the contact finish]
· The standard finish for contacts is tin plating. Gold plating is also available for 135-pin pin headers, offering a higher level of contact reliability.
[Misconfiguration-prevention types also available]
· Pin headers (70-pin and 135-pin versions) and socket housings come in standard types as well as types with different mating part conformations in order to prevent incorrect configuration. Use of these types prevents incorrect fitting when two different pin headers with pins in the same positions are used next to each other.
· Crimping enables easy connection.- Volume Discount
Configure nowStarting from∗ ： 3.61 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Han-Modular Series: Various Modules【1-2 Pieces Per Package】
HARTING
It is possible to save space used by connectors by selecting the modules to suit the operating environment (Models are separated using "-" rather than spaces).- Volume Discount
Configure nowStarting from∗ ： 7.56 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
One-Touch Lock D-Sub Hood
PROVERTHA
One-touch attachment and detachment of the Dsub connector will be possible. Can be installed freely using 3 connection accessories (locking bolts).- Volume Discount
Configure nowStarting from∗ ： 16.10 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
CSH Tool Not Required Spring Type 16A / 500V Insert
ILME
CSH, no-tool-required spring type, 16A / 500V insert
[Features]
・CSH.
・No-tool-required spring type.
▪ 16A / 500V.
▪ Insert- Volume Discount
Configure nowStarting from∗ ： 19.86 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
57F Series Flat Cable Crimping Connector
FUJIKURA (DDK)
The 57F series is an all-plastic flat cable crimping connector.- Volume Discount
Configure nowStarting from∗ ： 11.07 € Min. Shipping Days ： Same day *Unit price with basic configuration
-
Misumi, Waterproof, Single-Lever Hood (Straight)
MISUMI
[Features] MIAutomatic SteelIs original, low-cost, environmentally resistant and waterproof straight bonnet with single-lever base. It is a waterproof plug bonnet into which plugs of each series can be inserted according to the number of contacts. Fully compatible with the products of the main connector manufacturers. Connection to and disconnection from the mating connector can be performed with a single lever operation on the side of the base, facilitating attachment/detachment.- Volume Discount
- IP65
- For Power Supply
- Lever Lock
- 2D CAD data available
Configure nowStarting from∗ ： 5.42 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
PCS Series
HONDA TSUSHIN KOGYO
Multiple Varieties of Compact High Density Interface 1.27 Pitch Connectors
[Features]
· Board to cable types available in 20 to 96 cores.
• Cable connections are generally pressure welded (AWG #28, 30), helping save on labor costs for connecting wires.
· Soldered types also available.
▪ For EMI measures other than FCC.
• Built with a durable structure for use as an interface.
· Quick lock using a metal lock spring.
· Those for panel relays are also available.
· Accessories for preventing incorrect insertion are also available.
· A wide range of core numbers, from 34 to 150, are also available for board to board.
• Specifically designed for smooth insertion and extraction, even when using multiple cores.
• Features a liquid drainage structure within the housing to ensure no cleaning liquid is left behind during flux washing operations (mold type male connector).- Volume Discount
Configure nowStarting from∗ ： 6.14 € Min. Shipping Days ： 6 Days *Unit price with basic configuration
-
1.78-mm Pitch Square Interface Connector, QM Series
HIROSE ELECTRONIC
Terminal opening and connection portion both possess a 1.78-mm pitch grid array, small size, and high density. Terminals are constructed with a ribbon shape, making them strong against prying and ensured for 1,000 insertions and extractions.
[Features]
· Terminal opening and connection portion both possess a 1.78-mm pitch grid array for use with small electric devices.
· Terminals are constructed with a ribbon shape, making them strong against prying and ensured frequent insertions and extractions.
· Able to be press welded when bunched with 0.89-mm (.35°) pitch cable (No.30 AWG) in an attempt to reduce work effort.
· The dip connector, along with a construction that allows the grounding of electrical interference waves arising from the cable and connector on the circuit board surface, includes a circuit board snap stop.
· The cover case is made of a die cast zinc amalgam effective in blocking electromagnetic waves, and a receptacle side bracket is included for effective noise reduction.
· There are two types of cover case: hood type and lock (bevel opening) type. The lock type allows for single-action operation.- Volume Discount
Configure nowStarting from∗ ： 6.12 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Board-to-Cable / FPC / Thin Coaxial Cable Connector (1-mm Pitch) - DF19 Series【1-100 Pieces Per Package】
HIROSE ELECTRONIC
A thin, 1-mm pitch, board-to-cable/FPC/thin coaxial cable connector. Available in a wide array of variations for circuit boards and cables.
In-stock custom products cannot be returned or canceled. Thank you.- Volume Discount
Configure nowStarting from∗ ： 0.17 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Box Type Pin Header with 2.54-mm Pitch, HIF3F Series
HIROSE ELECTRONIC
This box type pin header is constructed to prevent reverse insertion. Able to be mated with HIF3B series sockets.
[Features]
▪ Reverse insertion prevention: pin header equipped with a HIF3E series connector portion protector wall to prevent reverse insertion.
▪ Compatibility: pin header compatible with HIF3B series.- Volume Discount
Configure nowStarting from∗ ： 1.57 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Discrete Wire Connector for Connection, DF3 Series (2 mm Pitch)【1-100 Pieces Per Package】
HIROSE ELECTRONIC
Connector for board-to-cable, cable-to-cable, and board-to-board connections with 2-mm pitch 1 terminal row. Can use for a wide range of equipment.
In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.- Volume Discount
Configure nowStarting from∗ ： 0.11 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Board-to-Cable Connector DF33 Series for 3.3-mm Pitch Internal Power Supply【1-100 Pieces Per Package】
HIROSE ELECTRONIC
It is compact and also supports up to 5 A. With its locking mechanism, mis-connection prevention structure, potting compatibility and high reliability, it is optimal for internal power supply connection in equipment.- Volume Discount
Configure nowStarting from∗ ： 0.11 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Connector for Ribbon Cable, Compatible with 3A, HIF4 Series
HIROSE ELECTRONIC
Current volume is now 3 A rather than the 1 A of conventional ribbon cable connectors (HIF3B, etc.), offering a wider range of use.
[Features]
· Current volume is now 3 A rather than the 1 A of conventional ribbon cable connectors such as HIF3B, offering a wider range of use.
· With an automatic lock mechanism, exceptional reliability in the face of vibrational impact is ensured.
· With an automatic extraction lever with lock release, an extraction tool is not required.
· Compatible lines include the (UL2651) No. 24 AWG flat cable (7 wires/0.203 mm, external cover diameter of 1.0–1.2 mm).- Volume Discount
Configure nowStarting from∗ ： 3.65 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
D-Sub Connector (Crimped Wire Connection Type) - CD Series【1-100 Pieces Per Package】
HIROSE ELECTRONIC
A crimped wire connection type D-sub connector. The cable can be connected to #20–28 AWG (using two types of terminal pins).
[Features]
· Has a metal shell and so is small and lightweight.
· Connector mounting can be performed on the chassis, front or back, or one of the sides.
· The attaching and detaching of the terminals is done by pressing the retainer sideways. Therefore, no special extraction tool is required.
· The insulator uses a UL material synthetic resin with excellent heat-resistant, chemical-resistant properties.
In-stock items are custom products, therefore returns and cancellations are not possible. Thank you. Returns and cancellations are not possible. Thank you for your understanding.- Volume Discount
Configure nowStarting from∗ ： 2.55 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Cover Case for HIF3B Series
HIROSE ELECTRONIC
This is a MIL standard-compliant ribbon cable connector HIF3B series crimped socket cover case.- Volume Discount
Configure nowStarting from∗ ： 4.33 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
-
Board-to-Cable Connector (1-mm Pitch) Supporting LVDS - FX15 Series
HIROSE ELECTRONIC
A shielded connector supporting LVDS transmission. A common board connector that can be selected with a discrete cable, a thin coaxial cable, or a shielded FCC.
In-stock items are custom products, therefore returns and cancellations are not possible. Thank you.- Volume Discount
Configure nowStarting from∗ ： 1.20 € Min. Shipping Days ： 5 Days *Unit price with basic configuration
![[Enclosure]C Type IP66, Rotary Lever Series](http://content.misumi-ec.com/image/upload/f_auto,t_product_view_b/v1/p/jp/product/series/222302286007/222302286007_003_20230801115838.jpg)
| Brand |
|---|
| Product Series |
| CAD |
| Starting from∗ |
| Min. Shipping Days |
| Specifications |
| Connector Shape |
| A/B/C |
| D/E/F |
| G/H/I |
| J/K/L |
| M/N/O |
| P/Q/R |
| S/T/U |
| Katakana |
| Number |
| Applicable pin/contact |
| Number Of Cores |
| Application |
| Allowable Current(A) |
| Allowable Voltage(V) |
| Wire connection method |
| Connection direction |
| Protection function (environmentally resistant) |
| Representative Standard |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | HONDA TSUSHIN KOGYO | FUJIKURA (DDK) | HIROSE ELECTRONIC | MISUMI | HONDA TSUSHIN KOGYO | JAPAN AVIATION ELECTRONICS(JAE) | HONDA TSUSHIN KOGYO | ILME | HARTING | HONDA TSUSHIN KOGYO | FUJIKURA (DDK) | WEIDMUELLER | HONDA TSUSHIN KOGYO | JAPAN AVIATION ELECTRONICS(JAE) | ILME | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | JAPAN AVIATION ELECTRONICS(JAE) | ILME | OMRON | UNIVER | MISUMI | WEIDMUELLER | WEIDMUELLER | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | JAPAN AVIATION ELECTRONICS(JAE) | HARTING | PROVERTHA | ILME | FUJIKURA (DDK) | MISUMI | HONDA TSUSHIN KOGYO | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC | HIROSE ELECTRONIC |
| Product Series | SUMICON 1600 Series Multi-Contact Rectangular Connector【1-100 Pieces Per Package】 | Misumi, Waterproof, E-Model Connector (Screw Wire Connection) | Board-to-Cable Connector with 1.25-mm Pitch - DF13 Series【1-10,000 Pieces Per Package】 | CK / CKS Small Screw Type and Spring Type 10A / 250 V Insert | Misumi, Waterproof, E-Model Connector (Crimp Wire Connection) | Half-Pitch I / O Connector (for Fanuc Servo Amps), FI Series | Rack and Panel Connector, QR / P Series【1-100 Pieces Per Package】 | Discrete Wire Connector for Connection, DF3 Series (2 mm Pitch)【1-100 Pieces Per Package】 | D-Sub Connector (Crimped Wire Connection Type) - CD Series【1-100 Pieces Per Package】 | Board-to-Cable Connector (1-mm Pitch) Supporting LVDS - FX15 Series | |||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||
| Starting from∗ | 4.64 € *Unit price with basic configuration Volume Discount | 5.41 € *Unit price with basic configuration Volume Discount | 0.55 € *Unit price with basic configuration Volume Discount | 12.29 € *Unit price with basic configuration Volume Discount | 8.79 € *Unit price with basic configuration Volume Discount | 1.57 € *Unit price with basic configuration Volume Discount | 3.45 € *Unit price with basic configuration Volume Discount | 6.26 € *Unit price with basic configuration Volume Discount | 5.07 € *Unit price with basic configuration Volume Discount | 1.83 € *Unit price with basic configuration Volume Discount | 4.30 € *Unit price with basic configuration Volume Discount | 10.25 € *Unit price with basic configuration Volume Discount | 3.73 € *Unit price with basic configuration Volume Discount | 1.26 € *Unit price with basic configuration Volume Discount | 2.97 € *Unit price with basic configuration Volume Discount | 0.14 € *Unit price with basic configuration Volume Discount | 4.59 € *Unit price with basic configuration Volume Discount | 3.11 € *Unit price with basic configuration Volume Discount | 6.71 € *Unit price with basic configuration Volume Discount | 7.00 € *Unit price with basic configuration Volume Discount | 6.20 € *Unit price with basic configuration Volume Discount | 1.56 € *Unit price with basic configuration Volume Discount | 11.75 € *Unit price with basic configuration Volume Discount | 7.48 € *Unit price with basic configuration Volume Discount | 83.02 € *Unit price with basic configuration | 0.06 € *Unit price with basic configuration Volume Discount | 4.07 € *Unit price with basic configuration Volume Discount | 2.40 € *Unit price with basic configuration Volume Discount | 0.50 € *Unit price with basic configuration Volume Discount | 3.61 € *Unit price with basic configuration Volume Discount | 7.56 € *Unit price with basic configuration Volume Discount | 16.10 € *Unit price with basic configuration Volume Discount | 19.86 € *Unit price with basic configuration Volume Discount | 11.07 € *Unit price with basic configuration Volume Discount | 5.42 € *Unit price with basic configuration Volume Discount | 6.14 € *Unit price with basic configuration Volume Discount | 6.12 € *Unit price with basic configuration Volume Discount | 0.17 € *Unit price with basic configuration Volume Discount | 1.57 € *Unit price with basic configuration Volume Discount | 0.11 € *Unit price with basic configuration Volume Discount | 0.11 € *Unit price with basic configuration Volume Discount | 3.65 € *Unit price with basic configuration Volume Discount | 2.55 € *Unit price with basic configuration Volume Discount | 4.33 € *Unit price with basic configuration Volume Discount | 1.20 € *Unit price with basic configuration Volume Discount |
| Min. Shipping Days | Same day | Same day | Same day | 5 Days | Same day | 5 Days | Same day | Same day | Same day | Same day | Same day | 4 Days | 6 Days | 5 Days | Same day | Same day | 5 Days | Same day | 5 Days | Same day | Same day | Same day | 5 Days | 4 Days | 4 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | Same day | Same day | Same day | 5 Days | 6 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days | 5 Days |
| Specifications |
|
|
| ||||||||||||||||||||||||||||||||||||||||||
| Connector Shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape | Square shape |
| A/B/C | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Other | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Other | - | - |
| D/E/F | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Other | Dsub | Dsub | - | - | - | - | - | - | - | Other | Other | - | - | - | - | - | - | - | - | - | - | Other | - | Other | Other | - | Dsub | - | Other |
| G/H/I | - | - | - | Heavy duty | - | - | - | - | Heavy duty | - | - | Other | - | - | - | - | - | Other | - | - | - | - | Heavy duty | Other | - | - | - | - | - | - | Heavy duty | - | - | - | Heavy duty | - | - | - | Other | - | - | Other | - | Other | - |
| J/K/L | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Other | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| M/N/O | - | - | - | - | - | - | MR | - | - | MR | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| P/Q/R | Other | - | - | - | Other | - | - | - | - | - | - | - | Other | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Other | Other | - | - | - | - | - | - | Other | Other | - | - | - | - | - | - | - | - |
| S/T/U | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Katakana | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Number | - | Other | Other | - | - | - | - | - | - | - | Other | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Other | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Applicable pin/contact | Male (plug) / Female (socket) | Male (plug) / Female (socket) | Male (plug) / Female (socket) / Combination use male/female | Male (plug) / Female (socket) | - | Male (plug) / Female (socket) | - | - | - | Male (plug) / Female (socket) | Male (plug) / Female (socket) | Male (plug) / Female (socket) | - | Male (plug) / Female (socket) | Male (plug) / Female (socket) | Male (plug) / Female (socket) | - | Male (plug) / Female (socket) | Male (plug) / Female (socket) | Male (plug) / Female (socket) | Male (plug) / Female (socket) | Female (socket) | Male (plug) / Female (socket) | Male (plug) / Female (socket) | - | Male (plug) / Female (socket) | Female (socket) | Female (socket) | Male (plug) / Female (socket) / Combination use male/female | Male (plug) / Female (socket) | - | - | Male (plug) / Female (socket) | Male (plug) / Female (socket) | - | Female (socket) | Male (plug) / Female (socket) | Female (socket) | Male (plug) | Male (plug) / Female (socket) | Male (plug) / Female (socket) | Male (plug) / Female (socket) | Male (plug) / Female (socket) | - | Male (plug) |
| Number Of Cores | 20 ～ 96 | 14 ～ 50 | 8 ～ 60 | 6 ～ 48 | 20 ～ 96 | 3 ～ 50 | 8 ～ 50 | - | - | 8 ～ 50 | 9 ～ 37 | 10 ～ 24 | 20 ～ 50 | 3 ～ 40 | 1 ～ 25 | 2 ～ 40 | 9 ～ 37 | 9 ～ 50 | 12 ～ 40 | 3 ～ 4 | 15 | 1 | 6 ～ 24 | 3 ～ 16 | 24 ～ 48 | 4 ～ 32 | 15 ～ 20 | 24 | 4 ～ 24 | 31 ～ 135 | 2 ～ 17 | 9 ～ 50 | 6 ～ 48 | - | - | 20 ～ 50 | 26 | 8 ～ 20 | 10 ～ 60 | 2 ～ 15 | 2 ～ 4 | 20 ～ 40 | 9 ～ 37 | 20 ～ 60 | 31 ～ 51 |
| Application | Cable Connection / For PCB / Panel Mount | Cable Connection / Panel Mount | Cable Connection / For PCB | Cable Connection | Other | Cable Connection / For PCB | Other | - | - | For PCB / Panel Mount | Cable Connection / Panel Mount | - | Other | Cable Connection / For PCB | Cable Connection | Cable Connection / For PCB | - | Cable Connection | Cable Connection / For PCB | Cable Connection | For PCB | Cable Connection | Cable Connection | - | - | Cable Connection / For PCB / Panel Mount | Cable Connection | Panel Mount | Panel Mount / Other | Cable Connection / For PCB | Cable Connection | - | Cable Connection | Cable Connection / Panel Mount | - | Cable Connection | Cable Connection / For PCB | Cable Connection | For PCB | Cable Connection / For PCB / Panel Mount | Cable Connection / For PCB | Cable Connection / For PCB | Cable Connection | - | Cable Connection |
| Allowable Current(A) | 1 | 5 | 3 | 16 | - | - | - | - | - | 3 | 5 | 16 | - | - | 4 ～ 200 | 1 | - | 3 | - | 10 | 3 | AC/DC | 16 | 10 ～ 16 | 16 | 0.5 ～ 2 | 1 | 10 | 7 ～ 13 | - | 10 ～ 40 | - | 16 | - | - | 1 | 0.5 | 1 | 1 | 3 | 5 | 3 | 3 | - | 0.5 |
| Allowable Voltage(V) | AC250 | AC500 | AC300 | 500 ～ 600 | - | - | - | - | - | AC300 | AC300 | 500 | - | - | 50 ～ 1000 | AC150 | - | AC400 | - | 250 ～ 400 | AC300 | 12 VDC - 230 VAC | 500 ～ 600 | 250 | 500 | AC100 ～ AC250 | AC250 | AC120 | AC250 ～ AC600 | - | 160 ～ 1000 | - | 500 | AC250 | - | AC250 | AC100 | AC100 | AC200 | AC250 | 500 | AC300 | AC350 | - | AC100 |
| Wire connection method | Solder / Pressure Welding | Solder | Solder / Crimp / Other | Fasten With Screws | - | Solder / Crimp / Pressure Welding | - | - | - | Solder | Solder | Fasten With Screws | - | Crimp | Crimp / Fasten With Screws / Other | Crimp / Other | - | Solder | Crimp | Fasten With Screws / Other | - | Fasten With Screws | Crimp | Fasten With Screws | - | Crimp / Pressure Welding / Other | Solder / Pressure Welding | - | Crimp | Crimp | Crimp / Pressure Welding / Other | - | Other | Pressure Welding | - | Solder | Solder / Other | Crimp | Other | Crimp / Other | Crimp / Other | Pressure Welding | Crimp | Crimp | Solder / Crimp |
| Connection direction | Straight / Angle | Straight | Straight / Angle | Straight | Straight | Straight / Angle | Straight | - | - | Straight / Angle | Straight | Straight | Straight | Straight / Angle | Straight | Straight / Angle | Straight | Straight | Straight / Angle | Straight | Straight | Straight | Straight | Straight | - | Straight / Angle | Straight | Straight | Straight | Straight / Angle | - | Straight | Straight | Straight | - | Straight | Straight / Angle | Straight | Straight / Angle | Straight / Angle | Straight | Straight / Angle | Straight | Straight | Straight |
| Protection function (environmentally resistant) | N/A | N/A | - | Available | N/A | N/A | N/A | Available | Available | N/A | N/A | N/A | N/A | N/A | - | - | - | - | Available | Available | - | N/A | Available | N/A | - | - | - | - | - | N/A | Available | - | - | N/A | Available | N/A | - | - | - | - | - | - | - | - | - |
| Representative Standard | - | - | - | CE / UL | - | - | - | UL / CUL | - | - | - | UL / CSA | - | - | UL / CUL / CCC / CSA | - | - | - | - | UL / CUL / CCC / CSA | - | - | CE / UL | UL / CSA | - | UL / CSA | - | UL / TUV / CSA | UL / TUV / CSA | - | - | UL | UL / CCC / CSA | - | CE | - | - | - | - | UL / CSA | - | - | - | UL | - |
![[Enclosure]C Type IP66, Rotary Lever Series](http://content.misumi-ec.com/image/upload/f_auto,t_product_view_c/v1/p/jp/product/series/222302286007/222302286007_003_20230801115838.jpg)
Loading...
Filter by:
Stock
-
- Show only stock items
-
Connector Shape
- Round
- Square shape
- Other
-
A/B/C
- Other
-
D/E/F
- Dsub
- FCN
- Other
-
G/H/I
- Heavy duty
- Other
-
J/K/L
- Other
-
M/N/O
- MR
- MIL
- Other
-
P/Q/R
- Other
-
S/T/U
- Other
-
Katakana
- Dynamic
-
Number
- Other
-
Applicable pin/contact
- Male (plug)
- Female (socket)
- Combination use male/female
- Other
-
Number Of Cores
- 1
- 2
- 2 (1 column x 2)
- 3
- 3 (1 column x 3)
- 4
- 4 (2 column x 2)
- 5
- 5 (2 columns x 2 + center: 1)
- 6
- 6 (1 column x 6)
- 6 (2 columns x 3)
- 7
- 7 (2 columns x 3 + center: 1)
- 8
- 8 (2 columns x 3 + center: 2)
- 8 (2 columns x 4)
- 9
- 9 (2 columns x 4 + center: 1)
- 9 (3 columns x 3)
- 10
- 11
- 12
- 12 (2 columns x 5 + center: 2)
- 12 (2 columns x 6)
- 12 (3 columns x 4)
- 13
- 13 (2 columns x 6 + center: 1)
- 14
- 15
- 16
- 17
- 17 (2 columns x 8 + center: 1)
- 18
- 18 (3 columns x 6)
- 20
- 21
- 21 (2 columns x 10 + center: 1)
- 22
- 24
- 25
- 26
- 27
- 28
- 30
- 31
- 32
- 34
- 35
- 36
- 37
- 38
- 40
- 41
- 42
- 45
- 46
- 48
- 50
- 51
- 52
- 56
- 60
- 64
- 68
- 70
- 72
- 75
- 80
- 92
- 96
- 98
- 100
- 104
- 108
- 110
- 120
- 135
-
Application
-
Allowable Current(A)
-
Allowable Voltage(V)
- 5
- DC 12
- 12 VDC - 230 VAC
- 17.5
- 24
- 25
- 30
- AC30
- 50
- AC50
- 72
- 100
- AC100
- AC120
- 125
- AC125
- 150
- AC150
- AC150/DC200
- 160
- AC200
- 230/400
- 250
- AC250
- 300
- AC300
- 320
- AC350
- DC350
- 400
- AC400
- 400/400 V (Leistungs-/Steuerungsbereich)
- 400/690
- 400/690 V (Leiter-Erde/Leiter/Leiter)
- 400/690 V(Leiter-Erde/Leiter-Leiter)
- 500
- AC500
- AC/DC500
- 550
- 600
- AC600
- 630
- 690
- 690/160 V (Leistungs-/Steuerungsbereich)
- 830
- 830/400 V (Leistungs-/Steuerungsbereich)
- 1000
- 1550
- AC/DC3000
- 3100
-
Wire connection method
- Solder
- Crimp
- Pressure Welding
- Fasten With Screws
- Other
-
Connection direction
- Straight
- Angle
- Other
-
Protection function (environmentally resistant)
-
Representative Standard
Brand
-
- HIROSE ELECTRONIC (47)
- ILME (21)
- WEIDMUELLER (20)
- TE CONNECTIVITY (17)
- JAPAN AVIATION ELECTRONICS(JAE) (15)
- MOLEX (14)
- WAGO (12)
- FUJIKURA (DDK) (8)
- HONDA TSUSHIN KOGYO (8)
- OMRON (5)
- HARTING (4)
- UNIVER (1)
- FUJITSU COMPONENT (1)
- PROVERTHA (1)
- 3M (1)
- SOURIAU (1)
- KEL (0)
- FINDER (0)
- FISCHER ELEKTRONIK (0)
- IFM ELECTRONIC (0)
- NEUTRIK (0)
- LUMBERG (0)
- HELLERMANN TYTON (0)
- AMPHENOL ICC (0)
- CONNFLY (0)
- PTR (0)
- DECA (0)
- BINDER (0)
- LAPP (0)
- EDAC (0)
- PHOENIX CONTACT (0)
- CONEC (0)
- TRU COMPONENTS (0)
- ECON CONNECT (0)
- HIRSCHMANN (0)
- ASSMANN WSW (0)
- VOGT VERBINDUNGSTECHNIK (0)
- MH CONNECTORS (0)
- BKL ELECTRONIC (0)
CAD data type
-
- 2D
- 3D
Categories related to Square Connectors
Betalningsmetod
Faktura
Förskottsbetalning
Behovsstyrd tillverkning
Certifikat
Copyright © MISUMI Corporation All Rights Reserved.