Filtreringsvillkor

Rensa alla

  • Lager
  • R Size(mm)
  • Type
  • work material
    • Blade length (ℓ)(mm)
      [5-30/1mm units]
    • Number of flutes(sheet)
    • Coating
    • Carbide Ball End Mills (work material: Cast Iron 2 sida)

      • 2-Flute, Ball End, MG-EBD
        • Volume Discount

        OSG

        2-Flute, Ball End, MG-EBD

        Achieves long tool life at medium low speed by adopting the high toughness cemented carbide
        Mer information
        R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
        6.5 ~ 12.5BallCast Iron[○]26 ~ 502Non-Coated110 ~ 180-12 ~ 25
        Ordinarie pris (exklusive MOMS):
        232.16 €
        Ordinarie avsändningsdatum:
        6 arbetsdagar
        Konfigurera
      • 2-Flute, Ball End, WX-EBD

          OSG

          2-Flute, Ball End, WX-EBD

          General-purpose ball end mill for a wide range of workpieces and machining. High toughness carbide-based materials achieve a stable long-term continuous machining.
          Mer information
          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
          0.6BallCast Iron[◎]32TiAlN50-4
          Ordinarie pris (exklusive MOMS):
          33.32 €
          Ordinarie avsändningsdatum:
          6 arbetsdagar
          Konfigurera
        • 2-Flute, Ball End, WXS-EBD

            OSG

            2-Flute, Ball End, WXS-EBD

            High-precision ball end mill that was subjected to a WX super coat of super-hard and ultra-heat. High-speed machining of general steel, of course, but even suitable for high speed direct carving machining of hardened steel.
            Mer information
            R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
            0.75 ~ 2BallCast Iron[◎]1.5 ~ 42For High Hardness (Silicon Group)50 ~ 603 ~ 84
            Ordinarie pris (exklusive MOMS):
            30.41 €
            Ordinarie avsändningsdatum:
            6 arbetsdagar
            Konfigurera
          • 2-Flute, Ball End (Heavy Duty Type) WXL-HS-EBD
            • Volume Discount

            OSG

            2-Flute, Ball End (Heavy Duty Type) WXL-HS-EBD

            WXL coating with excellent lubrication and abrasion resistance. Compatible With a Wide Range of Materials and Cutting Regions
            Mer information
            R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
            0.1 ~ 6BallCast Iron[◎]0.4 ~ 182For General Steels (AlCrN, etc.)35 ~ 70-4 ~ 12
            Ordinarie pris (exklusive MOMS):
            41.80 €
            Ordinarie avsändningsdatum:
            6 arbetsdagar
            Konfigurera
          • 2-Flute, Ball End (High Precision Type) FX-EBD-6

              OSG

              2-Flute, Ball End (High Precision Type) FX-EBD-6

              High precision ball end mill for high-speed machining that sufficiently exhibits performance of high-speed, high-precision machining center. Ultra-fine carbide based material achieves long tool life in hardened steel high-speed machining.
              Mer information
              R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
              0.1 ~ 3BallCast Iron[◎]0.2 ~ 62TiAlN501.1 ~ 96
              Ordinarie pris (exklusive MOMS):
              89.48 €
              Ordinarie avsändningsdatum:
              6 arbetsdagar
              Konfigurera
            • 2-Flute, Long Shank, Ball End, FX-LS-MG-EBD
              • Volume Discount

              OSG

              2-Flute, Long Shank, Ball End, FX-LS-MG-EBD

              Depth of long shank can be processed
              Mer information
              R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
              3BallCast Iron[◎]122TiAlN140-6
              Ordinarie pris (exklusive MOMS):
              101.29 €
              Ordinarie avsändningsdatum:
              6 arbetsdagar
              Konfigurera
            • 2-Flute Heavy Duty for Heavy Duty Cutting Ball End (HSK Compatible) FX-HS-EBDS
              • Volume Discount

              OSG

              2-Flute Heavy Duty for Heavy Duty Cutting Ball End (HSK Compatible) FX-HS-EBDS

              Ball end mill for heavy cutting that allows high-speed, high-efficiency (large depth of the cut) machining. Shrink-HSK Just Fit short overall length types.
              Mer information
              R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
              0.5 ~ 6BallCast Iron[◎]1 ~ 122TiAlN50 ~ 802.5 ~ 306 ~ 12
              Ordinarie pris (exklusive MOMS):
              87.89 €
              Ordinarie avsändningsdatum:
              6 arbetsdagar
              Konfigurera
            • 2-Flute, Ultra-High Precision Ball End (Heavy-Duty Type) WXE-HS-EBD

                OSG

                2-Flute, Ultra-High Precision Ball End (Heavy-Duty Type) WXE-HS-EBD

                Ultra-high accuracy precision grade of ball end mill series for carpentes. Short overall length of shrink-fit holder. HP3 spec comes with a product precision guarantee.
                Mer information
                R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                4BallCast Iron[◎]82TiAlN60168
                Ordinarie pris (exklusive MOMS):
                86.67 €
                Ordinarie avsändningsdatum:
                6 arbetsdagar
                Konfigurera
              • 2-Flute, Ball End with Lubricant Hole FX-HO-MG-EBD

                  OSG

                  2-Flute, Ball End with Lubricant Hole FX-HO-MG-EBD

                  Oil hole is quite useful in the machining of deep parts with chip emission problem.
                  Mer information
                  R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                  3 ~ 10BallCast Iron[◎]12 ~ 382TiAlN90 ~ 160-6 ~ 20
                  Ordinarie pris (exklusive MOMS):
                  91.40 €
                  Ordinarie avsändningsdatum:
                  6 arbetsdagar
                  Konfigurera
                • 2-Flute, Ball End with Lubricant Hole (High-Rigidity) FXS-HO-EBDS
                  • Volume Discount

                  OSG

                  2-Flute, Ball End with Lubricant Hole (High-Rigidity) FXS-HO-EBDS

                  Extremely increased rigidity ball end mill with oil hole for high hardness steel.
                  Mer information
                  R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                  3 ~ 10BallCast Iron[◎]6 ~ 202TiAlN90 ~ 160-6 ~ 20
                  Ordinarie pris (exklusive MOMS):
                  95.68 €
                  Ordinarie avsändningsdatum:
                  6 arbetsdagar
                  Konfigurera
                • 2-Flute Pencil Neck, Ball End FX-PC-MG-EBD

                    OSG

                    2-Flute Pencil Neck, Ball End FX-PC-MG-EBD

                    Quality cutting is provided even in large protruding length, due to high rigidity pencil neck.
                    Mer information
                    R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                    0.3 ~ 6BallCast Iron[◎]0.6 ~ 222TiAlN60 ~ 16010 ~ 806 ~ 16
                    Ordinarie pris (exklusive MOMS):
                    84.69 €
                    Ordinarie avsändningsdatum:
                    6 arbetsdagar
                    Konfigurera
                  • WXL-Coated 2-Flute Pencil Neck Ball End Type WXL-PC-EBD
                    • Volume Discount

                    OSG

                    WXL-Coated 2-Flute Pencil Neck Ball End Type WXL-PC-EBD

                    [Features]· WXL coating with excellent lubrication and wear resistance. Can be used with a wide range of work materials and cutting applications
                    Mer information
                    R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                    0.1 ~ 6BallCast Iron[◎]0.16 ~ 122For General Steels (AlCrN, etc.)45 ~ 1601 ~ 804 ~ 16
                    Ordinarie pris (exklusive MOMS):
                    63.80 €
                    Ordinarie avsändningsdatum:
                    6 arbetsdagar
                    Konfigurera
                  • 2-Flute Pencil Long Neck, Ball End FX-PCL-EBD

                      OSG

                      2-Flute Pencil Long Neck, Ball End FX-PCL-EBD

                      Ball end mill for deep engraving work that ordinary end mills can't reach.
                      Mer information
                      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                      2 ~ 6BallCast Iron[◎]8 ~ 222TiAlN200 ~ 250100 ~ 14010 ~ 16
                      Ordinarie pris (exklusive MOMS):
                      239.02 €
                      Ordinarie avsändningsdatum:
                      6 arbetsdagar
                      Konfigurera
                    • 3-Flute Pencil Neck, Ball End High-Cut High-Feed Type PHX-PC-DBT

                        OSG

                        3-Flute Pencil Neck, Ball End High-Cut High-Feed Type PHX-PC-DBT

                        Overturns old notions of deep engraving work with improved high efficiency machining. Unique spiral ball blade prevents vibrations during deep engraving and allows stable high feed cutting.
                        Mer information
                        R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                        0.5 ~ 6BallCast Iron[○]1.5 ~ 183For High Hardness (Silicon Group)60 ~ 2206 ~ 160.86 ~ 20
                        Ordinarie pris (exklusive MOMS):
                        83.42 €
                        Ordinarie avsändningsdatum:
                        6 arbetsdagar
                        Konfigurera
                      • 3-Flute Ball End, High-Cut High-Feed Type PHX-DBT

                          OSG

                          3-Flute Ball End, High-Cut High-Feed Type PHX-DBT

                          New concept ball end mill with a low-resistance blade tool shape for a large amount of cutting per blade. Can perform high-feed machining like never before.
                          Mer information
                          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                          0.5 ~ 10BallCast Iron[○]1.5 ~ 303TiAlN60 ~ 200-6 ~ 20
                          Ordinarie pris (exklusive MOMS):
                          84.50 €
                          Ordinarie avsändningsdatum:
                          6 arbetsdagar
                          Konfigurera
                        • For Finishing 2 Flute Ball End (HSK Compatible) FX-H-EBD
                          • Volume Discount

                          OSG

                          For Finishing 2 Flute Ball End (HSK Compatible) FX-H-EBD

                          Achieves stable cutting with not only HSK holders but also with L / D large shrink long arbors.
                          Mer information
                          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                          0.5 ~ 6BallCast Iron[◎]1 ~ 122TiAlN50 ~ 802.5 ~ 306 ~ 12
                          Ordinarie pris (exklusive MOMS):
                          83.15 €
                          Ordinarie avsändningsdatum:
                          6 arbetsdagar
                          Konfigurera
                        • 2-Flute Long Neck Ball End (Heavy Duty Type) WXL-HS-LN-EBD

                            OSG

                            2-Flute Long Neck Ball End (Heavy Duty Type) WXL-HS-LN-EBD

                            WXL coating with excellent lubrication and abrasion resistance. Compatible With a Wide Range of Materials and Cutting Regions
                            Mer information
                            R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                            0.3 ~ 1.5Long-Neck BallCast Iron[◎]0.5 ~ 2.42For General Steels (AlCrN, etc.)35 ~ 401.5 ~ 124
                            Ordinarie pris (exklusive MOMS):
                            20.02 €
                            Ordinarie avsändningsdatum:
                            6 arbetsdagar
                            Konfigurera
                          • 2-Flute Long Neck Ball End (High-Rigidity Type) FX-LN-EBD-6
                            • Volume Discount

                            OSG

                            2-Flute Long Neck Ball End (High-Rigidity Type) FX-LN-EBD-6

                            High-speed, high-accuracy, high-speed machining Long Neck Ball End Mill that sufficiently exhibits performance of the machining center.
                            Mer information
                            R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                            0.25 ~ 3Long-Neck BallCast Iron[◎]0.5 ~ 62TiAlN60 ~ 902.5 ~ 306
                            Ordinarie pris (exklusive MOMS):
                            88.82 €
                            Ordinarie avsändningsdatum:
                            6 arbetsdagar
                            Konfigurera
                          • 2-Flute Long Neck Ball End (for High Rigidity) WXS-LN-EBD
                            • KAMPANJFÖRSÄLJNING till 23.03.2025
                            • Volume Discount

                            OSG

                            2-Flute Long Neck Ball End (for High Rigidity) WXS-LN-EBD

                            Long neck ball which has been subjected to WX super coat of super-hard and ultra-heat-resistant. In accordance with the processing shape, freely effective length can be selected.
                            Mer information
                            R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                            0.1 ~ 3Long-Neck BallCast Iron[○]0.16 ~ 4.82For High Hardness (Silicon Group)45 ~ 900.5 ~ 404 ~ 6
                            Ordinarie pris (exklusive MOMS):
                            57.40 €
                            Ordinarie pris (exklusive MOMS):
                            Specialpris
                            Ordinarie avsändningsdatum:
                            Lagervara - 1 arbetsdag
                            Vissa artiklar kan skickas samma dag
                            Konfigurera
                          • 2-Flute Long Neck Ball End (Deep Rib Ball) WXL-LN-EBD
                            • KAMPANJFÖRSÄLJNING till 23.03.2025
                            • Volume Discount

                            OSG

                            2-Flute Long Neck Ball End (Deep Rib Ball) WXL-LN-EBD

                            Displays effectiveness on a wide range of uses such as metal mold machining to copper electrode processing thanks to the effects of the high hardness lubricating film WXL coating.
                            Mer information
                            R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                            0.05 ~ 3Long-Neck BallCast Iron[◎]0.08 ~ 62For General Steels (AlCrN, etc.)45 ~ 1200.3 ~ 503 ~ 6
                            Ordinarie pris (exklusive MOMS):
                            49.20 €
                            Ordinarie pris (exklusive MOMS):
                            Specialpris
                            Ordinarie avsändningsdatum:
                            Lagervara - 1 arbetsdag
                            Vissa artiklar kan skickas samma dag
                            Konfigurera
                          • 2-Flute Long Neck Ball End (Deep Rib Ball) WX-LN-EBD

                              OSG

                              2-Flute Long Neck Ball End (Deep Rib Ball) WX-LN-EBD

                              Long neck ball with choice of effective length according to machining form. High tenacity cemented carbide base material achieves a stable cutting in wide range of machining applications.
                              Mer information
                              R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                              0.1 ~ 3Long-Neck BallCast Iron[◎]0.16 ~ 4.82TiAlN45 ~ 1200.5 ~ 504 ~ 6
                              Ordinarie pris (exklusive MOMS):
                              35.60 €
                              Ordinarie avsändningsdatum:
                              6 arbetsdagar
                              Konfigurera
                            • HB, HM Coated 2-Flute Ball (1 Flute for R0.05 φ6 Shank Only)
                              • KAMPANJFÖRSÄLJNING till 23.03.2025
                              • Volume Discount

                              UNION TOOL

                              HB, HM Coated 2-Flute Ball (1 Flute for R0.05 φ6 Shank Only)

                              [Features]· Compared to conventional products, this model achieves higher machining efficiency, longer service life and higher quality machining of hard mold materials at 40 HRC or more.· New HARDMAX coating adopted to maintain film hardness while improving oxidation resistance· Provides stable processing for water-soluble/oil-based cutting oil, oil mist, and air blow· The machining dimension has been improved by improving the wear resistance and setting the rake angle of the ball tip to negative· The rake angle on the outer circumference side of the ball has been set to weak negative, securing sharpness, providing an excellent processed surface and preventing deflection
                              Mer information
                              R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                              0.1 ~ 0.75BallCast Iron[○]0.3 ~ 2.52For High Hardness (Silicon Group)50-4
                              Ordinarie pris (exklusive MOMS):
                              43.34 €
                              Ordinarie pris (exklusive MOMS):
                              Specialpris
                              Ordinarie avsändningsdatum:
                              8 arbetsdagar
                              Konfigurera
                            • HBL, HM Coated 2-Flute Long Shank Ball

                                UNION TOOL

                                HBL, HM Coated 2-Flute Long Shank Ball

                                [Features]· Long Shank Ball End Middle Series Supporting High-Hardness Materials· Uses HardMax coating compatible with high-speed machining of high-hardness materials· Capable of stable, long-life machining for both dry and wet type
                                Mer information
                                R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                                1.5 ~ 6BallCast Iron[○]4.5 ~ 252For High Hardness (Silicon Group)80 ~ 200-3 ~ 12
                                Ordinarie pris (exklusive MOMS):
                                110.99 €
                                Ordinarie avsändningsdatum:
                                6 arbetsdagar
                                Konfigurera
                              • HLB, HM Coated 2-Flute Long Neck Ball

                                  UNION TOOL

                                  HLB, HM Coated 2-Flute Long Neck Ball

                                  [Features]· Can even be used to cut 65 HRC high speed steel material, with outstanding heat resistance temperature and lubricity· Provides unprecedented long life and can be used for both dry and wet applications
                                  Mer information
                                  R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                                  0.4 ~ 3Long-Neck BallCast Iron[○]0.64 ~ 4.82For High Hardness (Silicon Group)45 ~ 803 ~ 304 ~ 6
                                  Ordinarie pris (exklusive MOMS):
                                  48.19 €
                                  Ordinarie avsändningsdatum:
                                  7 arbetsdagar
                                  Konfigurera
                                • HTNB HM Coated High-Precision Taper Neck Ball
                                  • KAMPANJFÖRSÄLJNING till 23.03.2025

                                  UNION TOOL

                                  HTNB HM Coated High-Precision Taper Neck Ball

                                  [Features]· High rigidity realized through an improved taper neck shape.· Adopts the HARDMAX coating that realizes outstanding heat resistance and lubricity· 65 HRC high hardness materials can also be cut
                                  Mer information
                                  R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                                  0.1 ~ 2Tapered neck ballCast Iron[○]0.16 ~ 3.22For High Hardness (Silicon Group)50 ~ 1201.5 ~ 624 ~ 6
                                  Ordinarie pris (exklusive MOMS):
                                  69.30 €
                                  Ordinarie pris (exklusive MOMS):
                                  Specialpris
                                  Ordinarie avsändningsdatum:
                                  Lagervara - 1 arbetsdag
                                  Vissa artiklar kan skickas samma dag
                                  Konfigurera
                                • UT Coat, 2-Flute Ball CSEB

                                    UNION TOOL

                                    UT Coat, 2-Flute Ball CSEB

                                    [Features]· With optimized blade shape, outstanding surface roughness is achieved for finishing and excellent wear resistance for roughing.· New UTCOAT with improved hardness, toughness, lubricity and adhesion is used to increase the wear resistance and surface roughness.· Supports a wide range from copper and raw materials to 55 HRC.
                                    Mer information
                                    R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                                    0.1 ~ 6BallCast Iron[○]0.3 ~ 182TiCN50 ~ 110-4 ~ 12
                                    Ordinarie pris (exklusive MOMS):
                                    38.11 €
                                    Ordinarie avsändningsdatum:
                                    6 arbetsdagar
                                    Konfigurera
                                  • UT COAT 2-Flute Long-Neck Ball CSLEB
                                    • KAMPANJFÖRSÄLJNING till 23.03.2025

                                    UNION TOOL

                                    UT COAT 2-Flute Long-Neck Ball CSLEB

                                    [Features]· With optimized blade shape, outstanding surface roughness is achieved for finishing and excellent wear resistance for roughing.· New UTCOAT with improved hardness, toughness, lubricity and adhesion is used to increase the wear resistance and surface roughness.· Supports a wide range from copper and raw materials to 55 HRC.
                                    Mer information
                                    R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                                    0.05 ~ 3Long-Neck BallCast Iron[○]0.08 ~ 4.82TiCN45 ~ 1200.3 ~ 603 ~ 6
                                    Ordinarie pris (exklusive MOMS):
                                    45.25 €
                                    Ordinarie pris (exklusive MOMS):
                                    Specialpris
                                    Ordinarie avsändningsdatum:
                                    Lagervara - 1 arbetsdag
                                    Vissa artiklar kan skickas samma dag
                                    Konfigurera
                                  • WXL-Coated 2-Flute Ball End Type WXL-EBD
                                    • KAMPANJFÖRSÄLJNING till 23.03.2025
                                    • Volume Discount

                                    OSG

                                    WXL-Coated 2-Flute Ball End Type WXL-EBD

                                    [Features]· High-accuracy ball end mill coated with WXL hard lubricating film coating. Proven performance on a wide range of work materials. Long life regardless of whether being used for dry-type or wet-type machining.
                                    Mer information
                                    R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                                    0.05 ~ 10BallCast Iron[◎]0.2 ~ 382For General Steels (AlCrN, etc.)40 ~ 160-4 ~ 20
                                    Ordinarie pris (exklusive MOMS):
                                    49.20 €
                                    Ordinarie pris (exklusive MOMS):
                                    Specialpris
                                    Ordinarie avsändningsdatum:
                                    Lagervara - 1 arbetsdag
                                    Vissa artiklar kan skickas samma dag
                                    Konfigurera
                                  • BEM2 Ball End Mill G2
                                    • Volume Discount

                                    ASAHI TOOLS

                                    BEM2 Ball End Mill G2

                                    Up to R4.5 specification products (solid tip) have a torsional shape on the rounded section as well, resulting in corners with improved profiling efficiency, which are ideal for rounding.
                                    Mer information
                                    R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                                    2 ~ 20BallCast Iron[◎]9 ~ 802Non-Coated100 ~ 220-10 ~ 32
                                    Ordinarie pris (exklusive MOMS):
                                    140.39 €
                                    Ordinarie avsändningsdatum:
                                    6 arbetsdagar
                                    Konfigurera
                                  • BEM2 Long Shank Ball End Mill G2
                                    • Volume Discount

                                    ASAHI TOOLS

                                    BEM2 Long Shank Ball End Mill G2

                                    2-flute ball end mill long shank type. Ideal for rounding corners.
                                    Mer information
                                    R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                                    5 ~ 15BallCast Iron[◎]30 ~ 602Non-Coated130 ~ 240-12 ~ 32
                                    Ordinarie pris (exklusive MOMS):
                                    187.46 €
                                    Ordinarie avsändningsdatum:
                                    6 arbetsdagar
                                    Konfigurera
                                  • SBD2 Ball End Mill, 2-Flute, Non-Coated
                                    • Volume Discount

                                    OKAZAKI SEIKO

                                    SBD2 Ball End Mill, 2-Flute, Non-Coated

                                    Ball end mill with standard radius accuracy of ±10 μm supporting a wide range of materials machining.
                                    Mer information
                                    R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                                    0.5 ~ 12.5BallCast Iron[○]2 ~ 552Non-Coated60 ~ 180-4 ~ 25
                                    Ordinarie pris (exklusive MOMS):
                                    64.35 €
                                    Ordinarie avsändningsdatum:
                                    10 arbetsdagar
                                    Konfigurera
                                  • SBD2L Long Ball End Mill, 2-Flute, Non-Coated
                                    • Volume Discount

                                    OKAZAKI SEIKO

                                    SBD2L Long Ball End Mill, 2-Flute, Non-Coated

                                    [Features] A long ball end cutter made of carbide with 2 cutting edges.The deep rib prevents the tool from interfering with deep cuts.The long shank allows milling over a wide area.[Features] Suitable for milling curved surfaces, engraving and R-slot milling.
                                    Mer information
                                    R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                                    1 ~ 12.5BallCast Iron[○]2 ~ 602Non-Coated80 ~ 23014 ~ 216 ~ 25
                                    Ordinarie pris (exklusive MOMS):
                                    85.50 €
                                    Ordinarie avsändningsdatum:
                                    10 arbetsdagar
                                    Konfigurera
                                  • SBD2LA Long Ball End Mill, 2-Flute, OK Coated
                                    • Volume Discount

                                    OKAZAKI SEIKO

                                    SBD2LA Long Ball End Mill, 2-Flute, OK Coated

                                    [Features] A carbide long ball end mill with 2 cutting edges.The deep rib shape prevents tool interference when deep cutting.The long shank allows milling in a wide range.[Features] Suitable for milling curved surfaces, engraving and R-slot milling.
                                    Mer information
                                    R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                                    1 ~ 12.5BallCast Iron[◎]2 ~ 602TiAlN80 ~ 23014 ~ 216 ~ 25
                                    Ordinarie pris (exklusive MOMS):
                                    101.35 €
                                    Ordinarie avsändningsdatum:
                                    8 arbetsdagar
                                    Konfigurera
                                  • SBD2LH Hard, Long Ball End Mill, 2-Flute, OK Hard Coated
                                    • Volume Discount

                                    OKAZAKI SEIKO

                                    SBD2LH Hard, Long Ball End Mill, 2-Flute, OK Hard Coated

                                    Long shank type that allows machining in deep sections. Achieves machining of hardened steel up to 65 HRC due to the OK hard coating.
                                    Mer information
                                    R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                                    1 ~ 12.5BallCast Iron[○]2 ~ 602For High Hardness (Silicon Group)80 ~ 23014 ~ 216 ~ 25
                                    Ordinarie pris (exklusive MOMS):
                                    101.35 €
                                    Ordinarie avsändningsdatum:
                                    10 arbetsdagar
                                    Konfigurera
                                  • SPSBD2A SP Series Ball End Mill 2 Flutes / OK Coated
                                    • Volume Discount

                                    OKAZAKI SEIKO

                                    SPSBD2A SP Series Ball End Mill 2 Flutes / OK Coated

                                    Ball end mill with standard radius accuracy of ±10 μm supporting a wide range of materials machining.
                                    Mer information
                                    R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                                    0.5 ~ 12.5BallCast Iron[◎]2 ~ 552TiAlN60 ~ 180-4 ~ 25
                                    Ordinarie pris (exklusive MOMS):
                                    23.34 €
                                    Ordinarie avsändningsdatum:
                                    6 arbetsdagar
                                    Konfigurera
                                  • One Cut Ball (Slim Shank) DZ-OCUB

                                      DIJET

                                      One Cut Ball (Slim Shank) DZ-OCUB

                                      Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
                                      Mer information
                                      R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                                      3BallCast Iron[◎]92TiAlN120-5
                                      Ordinarie pris (exklusive MOMS):
                                      93.50 €
                                      Ordinarie avsändningsdatum:
                                      6 arbetsdagar
                                      Konfigurera
                                    • One Cut Ball 03 DZ03-OCSB

                                        DIJET

                                        One Cut Ball 03 DZ03-OCSB

                                        Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
                                        Mer information
                                        R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                                        5BallCast Iron[◎]152TiAlN100-10
                                        Ordinarie pris (exklusive MOMS):
                                        117.74 €
                                        Ordinarie avsändningsdatum:
                                        6 arbetsdagar
                                        Konfigurera
                                      • One Cut Hard End Mill DV-OCSB

                                          DIJET

                                          One Cut Hard End Mill DV-OCSB

                                          Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
                                          Mer information
                                          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                                          3 ~ 5BallCast Iron[◎]9 ~ 152TiAlN90 ~ 100-6 ~ 10
                                          Ordinarie pris (exklusive MOMS):
                                          75.15 €
                                          Ordinarie avsändningsdatum:
                                          6 arbetsdagar
                                          Konfigurera
                                        • CoroMill Plura Carbide Ball End Mill, 1B240 (Hardness 48 HRC Or Less)
                                          • Volume Discount

                                          SANDVIK

                                          CoroMill Plura Carbide Ball End Mill, 1B240 (Hardness 48 HRC Or Less)

                                          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                                          2 ~ 10BallCast Iron[○]11 ~ 384Other80 ~ 125-6 ~ 20
                                          Ordinarie pris (exklusive MOMS):
                                          105.69 €
                                          Ordinarie avsändningsdatum:
                                          6 arbetsdagar
                                          Konfigurera
                                        • CoroMill Plura General-Purpose Carbide Ball End Mill, 1B230 (Hardness 48 HRC Or Less)
                                          • Volume Discount

                                          SANDVIK

                                          CoroMill Plura General-Purpose Carbide Ball End Mill, 1B230 (Hardness 48 HRC Or Less)

                                          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                                          0.5 ~ 10BallCast Iron[○]3 ~ 322Other38 ~ 104-3 ~ 20
                                          Ordinarie pris (exklusive MOMS):
                                          115.89 €
                                          Ordinarie avsändningsdatum:
                                          7 arbetsdagar
                                          Konfigurera
                                        • CoroMill Plura, Ball End Mill, Center Cut, RA216.42 (Hardness < 63 HRC)
                                          • Volume Discount

                                          SANDVIK

                                          CoroMill Plura, Ball End Mill, Center Cut, RA216.42 (Hardness < 63 HRC)

                                          R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                                          0.2 ~ 0.5Long-Neck BallCast Iron[○]0.3 ~ 12Other54 ~ 571 ~ 106
                                          Ordinarie pris (exklusive MOMS):
                                          146.85 €
                                          Ordinarie avsändningsdatum:
                                          6 arbetsdagar
                                          Konfigurera
                                        • SPEED / T 2 Flute Ball (150L)

                                            SPEED TIGER

                                            SPEED / T 2 Flute Ball (150L)

                                            [Features]· The AlTiN coating with high lubrication and 35° torsion angle focuses on the finished surface.· Sizes for all usage applications are included to achieve the optimal balance between usage method and price.
                                            Mer information
                                            R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                                            R 3.0BallCast Iron[○]122Other150-6
                                            Ordinarie pris (exklusive MOMS):
                                            72.58 €
                                            Ordinarie avsändningsdatum:
                                            5 arbetsdagar
                                            Konfigurera
                                          • 2-Blade Sander Ball
                                            • Volume Discount

                                            WIDIN

                                            2-Blade Sander Ball

                                            [Features]· Compatible with soft materials and aluminum alloys with a blade shape that emphasizes sharpness.
                                            Mer information
                                            R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                                            R0.75 ~ R10BallCast Iron[◎]4 ~ 382TiAlN50 ~ 160-3 ~ 20
                                            Ordinarie pris (exklusive MOMS):
                                            34.19 €
                                            Ordinarie avsändningsdatum:
                                            8 arbetsdagar
                                            Konfigurera
                                          • Carbide 2-Flute Short Ball End Mill 30° B222X
                                            • Volume Discount

                                            7 LEADERS

                                            Carbide 2-Flute Short Ball End Mill 30° B222X

                                            [Features]· 2-flute short ball end mill that supports a wide range of work materials.· Capable of continuous stable cutting.· Nanoparticle multilayer coating.· Excellent lubricity and abrasion resistance.· Exhibits its strength in general cutting processes.
                                            Mer information
                                            R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                                            0.15 ~ 10BallCast Iron[○]0.6 ~ 382-50 ~ 100-4 ~ 20
                                            Ordinarie pris (exklusive MOMS):
                                            24.21 €
                                            Ordinarie avsändningsdatum:
                                            8 arbetsdagar
                                            Konfigurera
                                          • Carbide 2-Flute Medium Ball End Mill 30° B232X
                                            • Volume Discount

                                            7 LEADERS

                                            Carbide 2-Flute Medium Ball End Mill 30° B232X

                                            [Features]· 2-flute medium ball end mill that supports a wide range of work materials.· Capable of continuous stable cutting.· Nanoparticle multilayer coating.· Excellent lubricity and abrasion resistance.· Exhibits its strength in general cutting processes.
                                            Mer information
                                            R Size(mm)Typework materialBlade length (ℓ)(mm)Number of flutes(sheet)CoatingOverall Length (L)(mm)Underneck length (ℓ1)(mm)Shank diameter (d)(mm)
                                            0.5 ~ 10BallCast Iron[○]2 ~ 382-50 ~ 160-6 ~ 20
                                            Ordinarie pris (exklusive MOMS):
                                            28.87 €
                                            Ordinarie avsändningsdatum:
                                            8 arbetsdagar
                                            Konfigurera

                                          Nyligen visade produkter